|
| 1 | GST % for the tender Please select the rate of GST in cell AY13. Rate selected shall be applicable for the entire BoQ. |
| 2 | CIVIL ARC WORKS |
| 3 | Supplying and filling selected earth/ moorum (excluding black cotton soil) from Contractor's own borrow areas including royalty, with all leads and lifts in trenches, plinth, sides of foundation etc. including watering, compacting in layers not exceeding 20cm thickness, complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of Site Engineer. |
| 4 | In all kinds of soil |
| 5 | Supplying and filling coarse sand under floors, in foundations and plinth including cost-of sand, royalty, transportation, loading , unloading, spreading in layers not exceeding 20 cm., watering, ramming, compacting, dressing and levelling etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of Site Engineer. |
| 6 | 1:1.5:3 [1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources] |
| 7 | 1:2:4 [1 cement : 2 coarse sand (Zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources] |
| 8 | 1:2:4 [1 cement : 2 coarse sand (Zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources] |
| 9 | 1:3:6 [1 cement : 3 coarse sand (Zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources] |
| 10 | 1:3:6 (1 cement : 3 coarse sand (Zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 11 | 1:4:8 [1 cement : 4 coarse sand (Zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources] |
| 12 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. [Note: Unit \\"KG\\" shall mean \\"PER BAG OF 50 KG OF CEMENT\\"]. |
| 13 | a) All work up to plinth level |
| 14 | b) In superstructure at all floors up to floor five level, |
| 15 | Extra for laying reinforced cement concrete in or under water and/ or liquid mud, including cost of pumping or bailing out water and removing slush etc., complete. [Notes : (1) The quantity will be calculated by multiplying the depth measured from the subsoil water level up to the centre of gravity of the R.C.C. under subsoil water with the quantity of R.C.C. in cubic metre executed under subsoil water. (2) The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. (3) No extra payment shall be made for placing reinforcement or centering & shuttering under sub-soil water conditions]. |
| 16 | Extra for laying concrete in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete. [Notes: (1) Unit \\"CUM\\" shall mean \\"CUBIC METRE PER METRE DEPTH\\". (2) The quantity will be calculated by multiplying the depth measured from the sub-soil water level up to centre of gravity of concrete under sub-soil water level with quantity of concrete in cum executed under sub-soil water. (3) The depth of centre of gravity shall be reckoned correct to 0.1 m. (4) 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored.] |
| 17 | Cement mortar 1:3 (1 cement : 3 coarse sand) |
| 18 | Steel reinforcement for R.C.C. workincluding initial straightening of coiled/uncoiled bars, removal of loose rust, cutting, bending to correct size & shape, binding with 18 gauge G.I. wire at each intersection and placing at any position, at any height and depth complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of Site Engineer. : Thermo-Mechanically Treated bars of grade Fe-500 D or more |
| 19 | Supplying, fabricating, erecting, placing and fixing in position M.S. structural works using rolled/ built up sections for truss, claddings, bracings, purlins, supporting frames made of joists, tubes, pipes, channels, angles, plates, flats, bars etc. including cutting to required size welding of joints, fixing anchor plates, including bolts, theading, nuts, washers, sleeves etc. including preparation of detailed fabrication drawings & submission to the Engineer-in-Charge for approval before start of fabrication, supplying & applying painting with two coats of epoxy paint \\"EPILUX 155 High Build Enamel over a coat of \\"EPILUX 610\\" Primer of M/s BERGER or any other approved equivalent make as per manufacturer’s recommendation, complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. (Excluding the cost of concrete work). |
| 20 | Supplying and fixing, shop fabricated M.S. steel Electroforged Welded Gratings (Hot dip galvanised as per IS:2629 and tested as per IS:2633 and IS:6745) of approved make with quantity of zinc coating shall not be less than 9.0 N/sqm of surface area (0.12 mm uniform thickness) over drains, stair treads etc., wherever required with maximum size of void/ mesh in the grating limited to 33 mm x 50 mm including welding/ fixing/ clamping to base frame, etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. |
| 21 | Supplying and placing in position 5.0 mm thick steel chequered plates over cable ducts, valve pits etc. including provision for lifting arrangements complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. |
| 22 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 23 | Cement Mortar 1:6 (1 cement : 6 coarse sand) |
| 24 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 25 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 26 | Cement mortar 1:3 (1 cement : 3 coarse sand) |
| 27 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 28 | Cement mortar 1:3 (1 cement :3 coarse sand) |
| 29 | Cement mortar 1:4 (1 cement :4 coarse sand) |
| 30 | 6 mm cement plaster of mix 1:3 (1 cement : 3 fine sand) |
| 31 | 25 mm nominal bore |
| 32 | 1:4 (1 cement : 4 fine sand) |
| 33 | Neat cement punning. |
| 34 | Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers [Note: Unit \\"BAG\\" shall mean \\"PER BAG OF 50 KG CEMENT USED IN THE MIX\\"). |
| 35 | Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof. |
| 36 | Providing and fixing Plaster of Paris (POP) false ceiling consisting of framework made with 50 sq.mm. M.S. tubes of 18G thickness as main runners at 600 mm c/c both ways, suspended/ supported with M.S. flats 25x4 mm from existing R.C.C. slab including providing and fixing minimum 10 mm thick POP (Calcium Sulphate Semihydrate variety) jute reinforced tiles of 600x600 mm size of plain or of approved design finished smooth to line and level including necessary supports, scaffolding etc. as required including applying a coat of red oxide zinc chromate primer over the M.S. framework and suspenders, etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. |
| 37 | Providing Plaster of Paris cornice (75 mm x 75 mm) at corners of wall and ceiling as per approved design complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge. |
| 38 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 39 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 40 | Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent |
| 41 | Providing and fixing LUXALON 75C & 225C un-perforated Aluminium panel coloured ceiling manufactured by M/s. HUNTER DOUGLAS INDIA or any other approved equivalent brand, each panel consisting of 75/225 mm wide x 15.5 mm deep and 0.5 mm thick with bevel edged panel made from enamelled corrosion resistance aluminium alloy AA-5050 (Al.Mg), each panel to abut each other with a narrow 'V' groove, clipping with a baked enamelled aluminium panel carrier of 32 mm wide x 39 mm deep x 0.95 mm thick in standard length of 5 metres made of double baked enamelled aluminium alloy AA-5050 (Al.Mg) black with cutouts to hold the panels in a module of 75 mm closed at a distance of 1.25 metre, each panel carrier suspended by means of G.I. suspension rod 4 mm diameter and a galvanised supsension spring clip at a distance of 1.7 metre centre to centre, making openings for light fittings etc. with suitable peimeter framing all complete as per manufacturer's recommendation and directions of the Engineer-in-Charge. [Note: Measurement shall be made wall to wall without any deduction for openings, for payment purpose]. |
| 42 | Providing and fixing first quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by the Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 Kg/sq.m., including pointing in white cement mixed with pigment of matching shade complete. |
| 43 | Size of Tile 600x600 mm |
| 44 | Size of Tile 600x600 mm |
| 45 | Size of Tile 600 x 600 mm |
| 46 | Dark shade pigment using ordinary cement |
| 47 | Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5 mm), including making drainage opening wherever required etc. complete as per directions of the Engineer-in-Charge. [Notes: (1) Length of finished kerb edging shall be measured for payment. (2) Old kerb stones shall be supplied by the department free of cost.] |
| 48 | Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the directions of the Engineer-in-Charge. [Note: Old CC paver blocks shall be supplied by the department free of cost]. |
| 49 | Mirror polishing on Marble work/ Granite work/ Stone work wherever required to give high gloss finish complete. |
| 50 | 60mm thick Cement Concrete paver block of M-35 grade with approved colour, design & pattern. |
| 51 | Supplying and laying flat brick soling in foundation trench, in floors, garages, sumps, etc., with bricks of class designation 50 laid to proper slope, level and grade etc. filling of the joints with sand etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. |
| 52 | Made of G.I. wire of dia 4 mm |
| 53 | Providing and fixing in position 12 mm thick bitumen impregnated fiber board conforming to IS:1838, including cost of primer, sealing compound Grade-A in expansion joints. [Note: Unit \\"CM\\" shall mean \\"PER CENTIMETRE DEPTH PER 100 METRE\\"] |
| 54 | 300 mm dia. R.C.C. pipe |
| 55 | 450 mm dia R.C.C. pipes |
| 56 | 600 mm dia R.C.C. pipes |
| 57 | 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge. |
| 58 | Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead of 1.0 kilometre, stacking serviceable and unserviceable material separately including cutting reinforcement bars. |
| 59 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) |
| 60 | Nominal concrete 1:4:8 or leaner mix (including equivalent design mix) |
| 61 | Demolishing brick work in cement mortar manually or by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations] |
| 62 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per directions of the Engineer-in-Charge. |
| 63 | Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per directions of the Engineer-in-Charge. |
| 64 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 65 | Roof, side cladding, gable end cladding, gutters, rainwater pipes/ spouts etc. [Note: The area of sheet coverings shall be measured on the flat surface i.e. without allowance for laps and ribs]. |
| 66 | Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 67 | Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150 mm dia up to 300 mm dia for all depth. |
| 68 | Cleaning of terrace/ loft water storage tank (inside surface area) up to 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per the directions of Engineer-in-Charge. [Note: The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any G.I. fittings or ball cock is damaged that is to be repaired by the Contractor at his own cost and nothing extra will be paid on this account]. |
| 69 | Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the directions of Engineer-in-Charge. |
| 70 | Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000x450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos. cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per directions of the Engineer-in-Charge. |
| 71 | Supplying and stacking of good earth at site including royalty and carriage up to any lead complete. [Note: Volume of earth measured in stacks will be reduced by 20% for payment]. |
| 72 | Supplying and stacking of well decayed cattle manure at site including royalty and carriage up to any lead complete. [Note: Volume of cattle manure measured in stacks will reduced by 8% for payment]. |
| 73 | Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/ and manure before and after flooding trench with water. [Note: The rate is excluding cost of imported earth, sludge or manure]. |
| 74 | Supplying & Stacking of Selection No.1/ Doob Grass at site fresh & free from weeds having proper roots in green including loading, unloading, carriage and all taxes paid etc. complete as per directions of the Engineer-in-Charge. |
| 75 | Tree Plant |
| 76 | Shrub Plant |
| 77 | Hedge Plant/ Ground Cover |
| 78 | Supply and planting sapling (not less than 45 cm in height and 60 cm centre to centre) of Casurina, Labrum, Gulmohar, Ashokas, Bottle Palm, Bougenvilla, Hibiscus, Roses or other approved type of variety of plants, watering & maintenance for 30 days minimum complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge. |
| 79 | Top inside diameter 35 cm, outer bottom diameter 25 cm, total height 35 cm with wall thickness of 25.4 mm |
| 80 | Top inside diameter 30 cm, outer bottom diameter 20 cm, total height 30 cm with wall thickness of 25.4 mm |
| 81 | Providing & fixing of White River (Stone) Pebbles size of 2\\" to 2.50\\" dia in natural colour at site of work including loading, unloading, carriage and all taxes paid etc.and as per directions of the Engineer-in-Charge. |
| 82 | Providing and fixing of TUFLEX Garden Fencing Hexagonal Net or approved equivalent of green colour (Weight 510 (+/-8%) grams/SQ.M) in width of 60 cm with bamboo of 90 cm length. The bamboo should be painted with green colour paint of approved brand and manufacture (two or more coats) and fixed 30 cm below ground level and 60 cm above ground level at a distance of 1.50 metres. The net and bamboo should be binded with 2 mm G.I. wire at three places properly as per directions of the Engineer-in-Charge. |
| 83 | Anti-termite treatment of infected trees including all branches/ leaves by spraying chemical emulsion (Chlorpyriphos 20% EC 0.5% concentration) through power spray machine @ 100 ml Chlorpyriphos per tree including cost of chemical, complete as per directions of the Engineer-in-Charge. [Note: Unit \\"EA\\" shall mean \\"EACH TREE\\"]. |
| 84 | Anti-termite treatment of lawn area using PREMISE 30.50% IP. One litre PREMISE diluted in 499 litres of water and applying solution @ 1.00 litre per sqm of lawn or bed area (two applications are required) including cost of chemical complete as per directions of the Engineer-in-Charge. |
| 85 | Cleaning and Sweeping of Lawn/ Garden area and keep it neat & clean by mechanized method/ manually, removimg litter, debris, picking of leaves, papers, plastic bottles etc. including disposal of collected waste in dustbin/ designated place, as per direction of the Engineer-in-Charge. [Note: All T&P, materials/ articles shall be provided by the Contractor]. |
| 86 | Cutting of designer hedge/ edge including removing of cut material, cleaning, hoeing of hedge/ edge, bed watering, manuring and applying insecticides and fungicides etc. (excluding the cost of materials) complete as per directions of the Engineer-in-Charge. [Note: Unit \\"SQM\\" shall mean \\"PER SQM PER MONTH\\".] |
| 87 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 88 | Providing and laying Neelgiri/ Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, complete as per direction of the Engineer-in-Charge. |
| 89 | Providing & laying Selection No. 1 grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same maintenance for 30 days or more till the grass establish properly, complete as per direction of the Engineer-in-Charge. |
| 90 | Re-lettering with black Japan paint of approved brand and manufacture. [Note: Unit \\"EA\\" shall mean \\"PER LETTER PER CM HEIGHT\\"]. |
| 91 | Lettering with black Japan paint of approved brand and manufacture. [Note: Unit \\"EA\\" shall mean \\"PER LETTER PER CM HEIGHT\\"]. |
| 92 | With water thinnable cement primer on wall surface having VOC content less than 50 grams/ litre. |
| 93 | With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works |
| 94 | With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat) |
| 95 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work |
| 96 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 97 | Painting with aluminium paint of approved brand and manufacture to give an even shade : One or more coats on old work |
| 98 | Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives: New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 99 | Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface. |
| 100 | Old work (one or more coats applied @ 0.83 ltr/10 sqm) |
| 101 | Painting with oil type wood preservative of approved brand and manufacture : Old work (one or more coats) |
| 102 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 103 | Providing and applying 2.5 mm thick road marking strips (retro-reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per directions of the Engineer-in-Charge and accordance with applicable specifications. |
| 104 | 100x60x2.50 mm |
| 105 | Providing and fixing stainless steel soft closing spring hinges at zero degree hinges (hydraulic type) of approved make/ brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of the Engineer-in-Charge. |
| 106 | Providing and fixing approved stainless steel finished tower bolts (barrel type) 10 mm diameter & 200 mm long with screws etc. complete as per drawings, specification and directions of the Engineer-in-Charge. |
| 107 | 200x10 mm |
| 108 | 150x10 mm |
| 109 | 100x10 mm |
| 110 | 250x10 mm |
| 111 | 150x10 mm |
| 112 | 100x10 mm |
| 113 | With stainless steel cover plate minimum 1.25 mm thickness |
| 114 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS:3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 115 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with IS:3564 embossed on the body, door weight up to 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. |
| 116 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. |
| 117 | Providing and fixing, on fixed glazing/ doors/ window panes, sun control film \\"HP NATURAL 35 SAFETY COMBINATION FILM-4Mil\\" of M/s. GARWARE or approved equivalent make and shade, all complete as per manufacturer's specification and as per directions of the Engineer-in-Charge. |
| 118 | With float glass panes of 5.00 mm thickness (weight not less than 12.5 kg/sqm) |
| 119 | 4.0 mm thick glass panes |
| 120 | 5.5 mm thick glass panes |
| 121 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 122 | Providing and fixing approved cylindrical lock of \\"ACME KASA\\" or equivalent with required colour or shade with nuts and screws etc. complete as per drawings, specifications and directions of the Engineer-in-Charge. |
| 123 | 125x63x4 mm |
| 124 | Providing and fixing aluminium pull bolt lock, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour and shade, with necessary screws bolts, nut and washers etc. complete. |
| 125 | Powder coated aluminium (Minimum thickness of powder coating 50 micron) |
| 126 | 125 mm |
| 127 | 100 mm |
| 128 | 100x75x3.50 mm |
| 129 | Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. |
| 130 | 12 mm dia. |
| 131 | 20 mm dia. |
| 132 | 25 mm dia. |
| 133 | Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610x390x370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and directions of the Engineer-in-Charge. |
| 134 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. |
| 135 | One urinal basin with 5 litre white P.V.C. automatic flushing cistern |
| 136 | White solid plastic seat with lid |
| 137 | 10 litre capacity - White |
| 138 | Orissa pattern W.C. pan of size 580x440 mm |
| 139 | Providing and fixing White Vitreous China pedestal type (European type/ Wash down type) water closet pan. |
| 140 | Long pattern W.C Pan of size 580x440 mm |
| 141 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron \\"P\\" or \\"S\\" trap, 10 litre low level white P.V.C. dual flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : White vitreous china orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 142 | W.C. pan with ISI marked white solid plastic seat and lid. |
| 143 | W.C. pan with ISI marked white solid plastic seat and lid |
| 144 | Dismantling of flushing cistern of all types (C.I./ PVC/ Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 145 | Flat back wash basin of size 630x450 mm |
| 146 | Angle back wash basin of size 400x400 mm |
| 147 | Providing and fixing White Vitreous China pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 148 | 610x460 mm bowl depth 200 mm |
| 149 | 15 mm nominal outer dia pipes |
| 150 | 20 mm nominal outer dia pipes |
| 151 | 25 mm nominal outer dia pipes |
| 152 | 15 mm nominal dia pipes |
| 153 | 20 mm nominal dia pipes |
| 154 | 25 mm nominal dia pipes |
| 155 | 32 mm nominal dia pipes |
| 156 | 15 mm nominal dia pipes |
| 157 | 20 mm nominal dia pipes |
| 158 | 25 mm nominal dia pipes |
| 159 | 32 mm nominal dia pipes |
| 160 | 40 mm nominal dia pipes |
| 161 | 50 mm nominal dia pipes |
| 162 | 80 mm nominal dia pipes |
| 163 | 25 mm dia nominal bore |
| 164 | 40 mm dia nominal bore |
| 165 | 50 mm dia nominal bore |
| 166 | 15 mm dia nominal bore |
| 167 | 20 mm dia nominal bore |
| 168 | 40 mm dia nominal bore |
| 169 | 50 mm dia nominal bore |
| 170 | Providing and fixing on wall face Unplasticised Rigid PVC (uPVC) rainwater pipes (110 mm diameter, single socketed) conforming to IS:13592 Type-A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion. |
| 171 | 32 mm diameter |
| 172 | 40 mm diameter |
| 173 | 32 mm diameter |
| 174 | 40 mm diameter |
| 175 | C.P. Brass |
| 176 | Coupler (110 mm) |
| 177 | Single Push-fit Coupler (110 mm) |
| 178 | Single Tee with door (110x110x110 mm) |
| 179 | Single Tee without door (110x110x110 mm) |
| 180 | Bend- 87.5 Degrees (110 mm) |
| 181 | Shoe - Plain (110 mm) |
| 182 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS-8931 : 15 mm nominal bore |
| 183 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms : 15 mm nominal bore |
| 184 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS-8931 : 15 mm nominal bore |
| 185 | Bib Cock (Ref. Make: JAQUAR, Model: Cat. No. 0107 or approved equivelent) |
| 186 | Bib Cock (Ref. Make: JAQUAR, Model: Cat. No. 0041 or approved equivelent) |
| 187 | Providing and fixing 15mm diameter C.P. brass stop cock with wall flange (Ref. Make: JAQUAR, Model: Cat. No. 0933 or approved equivalent), male end with C.P. copper connecting pipe 375mm long or as required including nuts, washers, C.P. brass flange etc. including cutting & making good the walls wherever required complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge. |
| 188 | 15 mm nominal bore, 86 mm long, weighing not less than 88 gms |
| 189 | 15 mm nominal bore, 122 mm long, weighing not less than 99 gms |
| 190 | 15 mm nominal bore, 86 mm long, weighing not less than 88 gms |
| 191 | 20 mm nominal bore, 89 mm long, weighing not less than 88 gms |
| 192 | 15 mm nominal bore, 98 mm long, weighing not less than 75 gms |
| 193 | 15 mm nominal bore, 80 mm long, weighing not less than 46 gms |
| 194 | Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms. |
| 195 | Angle Valve (Ref. Make: JAQUAR, Model: Cat. No. 0053 or approved equivalent) |
| 196 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS-8931 : 15 mm nominal bore |
| 197 | 20 mm nominal bore |
| 198 | 25 mm nominal bore |
| 199 | 32 mm nominal bore |
| 200 | 40 mm nominal bore |
| 201 | 50 mm nominal bore |
| 202 | 15 mm nominal bore |
| 203 | 20 mm nominal bore |
| 204 | 25 mm nominal bore |
| 205 | Waste coupling 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms. |
| 206 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 207 | Providing and fixing approved quality C.P. brass Towel Rail of 20mm diameter & 600mm long including C.P. brass brackets fixed with wooden cleats and C.P. brass screws etc. complete. |
| 208 | Providing and fixing C.P. brass Towel Ring 300mm diameter, fixed to P.V.C. cleats with C.P. brass screws, etc. complete. |
| 209 | Providing & fixing Angle Valve (Ref. Make: JAQUAR, Model: Cat. No. 563 or approved equivalent) and Health Faucet with flexible tube 8mm diameter x 1.5 m long (Ref. Make: JAQUAR, Model: Cat. No. 549 or approved equivalent). |
| 210 | 15.88 mm outer diameter pipe |
| 211 | 22.22 mm outer diameter pipe |
| 212 | 28.58 mm outer diameter pipe |
| 213 | For 15.88 mm outer diameter pipe |
| 214 | For 28.58 mm outer diameter pipe |
| 215 | For 15.88 mm outer diameter pipe |
| 216 | For 22.22 mm outer diameter pipe |
| 217 | For 28.58 mm outer diameter pipe |
| 218 | For 22.22 mm outer diameter pipe |
| 219 | Lifting, shifting, loading, unloading on of heavy equipment / material etc etc with the help of hydra/crane etc (Min 12T) including all accessories like belt, sling etc as per directions of EIC/ Site- Engineer. |
| 220 | Through cleaning of paved and unpaved areas, roads, road side berms, broming removal of scraps and other unwanted left over materials including removal of chockage in the drains, removal of chockage from the road side / pave or unpaved area side drains and disposal of the rubbish etc. to the nearest garbage bin or as directly by Engineer-in-charge including laboures, broom, trolley and other consumables etc.complete. |
| 221 | Cross section of drain upto 2.0 sqm. |
| 222 | Labour charges for cleaning and dechoking of the nahani trap, gully trap and inspection chambers alongwith the CI and SW pipe connection of house drainage including flushing, removal of sludge muck outside all labour, tools etc. complete. The contractorhas to clean the line from Nahani trap upto inspection chamber or vice-versa complete. |
| 223 | Manholes of depth upto 2.0 M |
| 224 | Manholes of depth beyond 2.0 M but upto 3.0M |
| 225 | Cleaning dechoking and flushing inspection chambers and connected drain lines with drain cleaning rods, bamboos, compressed air, steaming etc. removal of oily muck outside the chamber completed upto 100M lead. The item includes transportation of all machinery and plants, all labour, tools etc. complete, taking all necessary safety precautions as specified. Water at one point shall be supplied free of cost, hire charges for compressed air shall be paid separately if required. |
| 226 | Cleaning, dechoking and flushing 100mm/ 50mm SW and sewer line by removing muck, cleaning etc. with bamboo strips or sewer cleaning rods etc. as directed (section between two chambers) all complete including cleaning of two manholes as per direction of theEngineer-in-Charge. |
| 227 | Supply of tractor with trailer on hire charges for 08 hours per day including rendering the services of 4 labourers driver, fuel and other consumables, tools, tackles etc. for transportation of rubbish/ waste materials complete as per directions of Engineer-in-Charge.(8 hours working period of one tractor is considered as one tractor day). Unit \\"EACH\\" (EA) stands for tractor days. |
| 228 | Surface preparation of piping, equipment and valves etc. by abrasive blast cleaning or with power wire brush (wherever blast cleaning is not possible) confirming to SA 2.5, making the surface free of dust, grease, mill scales etc., application of 1 coat x 50-75 microns DFT of Inorganic Zinc Ethyl Slicate Primer, followed by application of sealer coat of 30 micron DFT and intermediate coat of 150 micron DFT with surface tolerant epoxy mastic paint and 2 coats x 50 micron each DFT of Isocynate Aliphatic Poly Urethene (PU) by airless spray, with approved materials, paints, tools, tackles, consulambles, non-consumables, labour, equipment etc. to complete the job in all respects as per specification and instructions of the Site Engineer / EIC. The total DFT shall be minimum 330 microns. |
| 229 | Liquid hand wash dettol (200 ml handwash pump) |
| 230 | Toilet Air freshner Odonil (50 gram for thirty days ) |
| 231 | Harpic toilet cleaner (500 Ml) |
| 232 | Lizol Disinfectant Surface Cleaner Citrus (1 L) |
| 233 | Napthalene Balls |
| 234 | Cleaning acid (Muritac acid)for bathroom tiles |
| 235 | Cleaning duster |
| 236 | CoConut Bamboo broom |
| 237 | Green brass broom (Full jhadu) |
| 238 | Mopping cloth/Pochha |
| 239 | Spin Mop Buckket (Milton brand or Equivalent) |
| 240 | Floor wiper (Brand -Scotch brite or equivalent size 40 cm ) |
| 241 | Room freshner (200 ml ,Brand-godrej aer or equivalent) |
| 242 | Collins mirror cleaning(500 ml) |
| 243 | Hand towel for toilet (Brand-Raymond or equivalent , Size-40*60 cm) |
| 244 | Toilet cleaning brush |
| 245 | Painting of posters like safety posters and any other as required includes surface preparation by scrapping , back ground painting with suitable primer and painting and painting poster as per instruction of EIC. |
| 246 | Ploughing the existing ground to a depth of 15 cm to 25 cm and watering the same : All kinds of soil. |
| 247 | FABRICATION AND ERECTION OF PIPE SUPPORT / PLATFORMS / DAVITS /STAIR CASE ETC. : The job includes getting the materials issued, transportation to work site and handling at site, fabrication at the required size and shape using steel pipes, MS structural / plates etc. by cutting, bevelling and welding including fixing of MS gratings / chequered plates on platform at all elevation by welding, boltingor otherwise to existing members or equipment. This also includes fabrication and fixing of pipe clamps, non-standard bolts etc. inclusive of labour, consumables, heavy equipment, tools and tackles and materials required for U-clamps, J-bolts etc. and complete in all respect as per drawings, specifications and instructions of the Engineer-in-Charge. (Excluding cost of structural steel). |
| 248 | 200x10 mm Please Enable Macros to View BoQ information |
