|
| 1 | Name of Work: Day to Day Petty Civil Work For Residential Quarters at OEFHz |
| 2 | S&F 15mm dia tubes with medium grade galvanised with all fittings, fixed to walls and ceilings |
| 3 | S&F of GI pipe line medium grade laid with all fittings,20mm dia |
| 4 | S&F of GI pipe line medium grade laid with all fittings,25mm dia |
| 5 | Taking up or down steel tubing and connections including cleaning for refixing or removal to store, 15mm dia |
| 6 | Ditto, 20 mm bore of |
| 7 | Ditto, 25 mm bore of |
| 8 | Refixing old steel tubing and connections in new or old position ( walls, ceiling , floors etc), 15 & 20 mm dia |
| 9 | Ditto, 25 or 32 mm dia |
| 10 | Ditto, 40 or 50 mm dia |
| 11 | Cutting existing steeltubing 15mm for alterations ordadditions (Each cut measured) |
| 12 | Cutting existing steeltubing 15mm for alterations ordadditions |
| 13 | Cutting existing steeltubing 20mm for alterations ordadditions (Each cut measured) |
| 14 | Cutting existing steeltubing for alterations ordadditions |
| 15 | Cutting existing steeltubing 25 or 32mm for alterations ordadditions (Each cut measured) |
| 16 | Cutting existing steeltubing for alterations ordadditions |
| 17 | Cutting existing steeltubing 40 or 50 mm for alterations ordadditions (Each cut measured) |
| 18 | Cutting existing steeltubing for alterations ordadditions |
| 19 | S&F bib tap standard of PTMT any color high pressure screwed for iron pipe and fixed 15mm dia (Prayag only) ( min wt 90 gm) |
| 20 | S&F Pillar taps Fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'cold' with along screwed shanks and fly-nuts, screwed for iron pipe and fixed |
| 21 | S&F of 15mm stop valve cast copper alloy serewed down high pressure with butterfly handle serewed both ends for iron pipe or for union & fixed. |
| 22 | S&F in repair of stop valve of PTMT any colour screwed and fixed, 15 mm dia (min wt 90gm) |
| 23 | S&F in repair of Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks 32mm dia |
| 24 | S&F ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed , 20mm (min. wt 210 gm) |
| 25 | S&F ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed , 25mm (min. wt 142 gm) |
| 26 | S&F Grating doom 100 mm dia of PTMT ( min wt 25grms) |
| 27 | S&F pvc connection 15mm size with PTMT nuts of length 450 mm |
| 28 | Dismentalling water tanks and removing to store ( 250 to 500 litter) |
| 29 | Cleaning and removing all scale and dirt, etc from trank sand from mouth of circulating pipes, etc (exc. 250 to not exc. 500 ltrs) |
| 30 | S&F rotational moulded polyethlene water storage tanks hoisted and fixed in position all specified( 500 litter) |
| 31 | supply vitreous china european seat |
| 32 | wash down water closet ( european seat ), fixed in repair |
| 33 | Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern. |
| 34 | S&F in repair of squatting pan of Vitreous China, pedestal pattern (excluding flushing cistern \\"P\\" or \\"S\\" trap front or back inlet oa any pattern |
| 35 | water closet ( squatt patern) fixed in repair |
| 36 | Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern. |
| 37 | pattern including lime concrete beeding connection to trap flushing pipe fixing onlyu in repair |
| 38 | vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) |
| 39 | Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern. |
| 40 | S&F flush pipe to pedestal pan, including all joints |
| 41 | Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device |
| 42 | Seat and cover for pedestal pan fixing onli in repair |
| 43 | High or low level fluslhing cistern (exclusive of brackets), and connections to pipes and fixing of chain and pull, or lever, if any |
| 44 | PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets |
| 45 | Flushing cistern and flushing pipe (exclusive of brackets), fixed in repairs |
| 46 | S&F in rapair Wash basins, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe |
| 47 | S&F of Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed |
| 48 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 49 | Health faucet fixing in pipe etc. complete (Fixing) |
| 50 | S&F PVC (SWR) pipes, single socketed in any length with rubber rings joints fixed to wall with clamps,110 mm dia bore with necessary sealing compound to be used |
| 51 | S&F of bends PVC (SWR) 110mm bore. |
| 52 | S&F of junction single, (Single T) equal or unequal, 110mm bore. |
| 53 | S&F branch piece, single (single Y) equal or unequal 110mm bore. |
| 54 | S&F PVC (SWR) vent cowl 110 mm |
| 55 | S&F of M.S. Clamp for support for rain water pipe |
| 56 | S&F Flush pipe of Polyethylene 3.2mm dia |
| 57 | S&F of 50mm Unplasticiscd PVC pipes of pressure rating 10 Kgf/cm2 laid in trenches |
| 58 | S&F PVC (SWR) P Trap 110mm dia |
| 59 | Taking down chowkhat or framed (without taking off shutters from the frame) exc.1.5 sq.m n.exc. 4sq.m each. Deposited in store |
| 60 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification |
| 61 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to befitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification |
| 62 | S&F butt hinge,100 mm |
| 63 | S&F Aluminium anodised, barrel tower bolts of extruded section and fixed 150 mm size |
| 64 | S&F Aluminium handles, cast type, anodised 100 mm size. |
| 65 | Resecuring or easing with taking down Shutters of any description n exc 1 sq. m each (Like window/ventilator) |
| 66 | Resecuring or easing & adjusting with taking down Shutters of any description n exc 2 sq. m each (Like Door)) |
| 67 | S&F of Plywood, grade BWR as directed 6mm thick (ventillators/window) |
| 68 | Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides (30mm thik) |
| 69 | S&F of 30mm thick flush if both faces |
| 70 | Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions (09mm) |
| 71 | S&F floor door stopper of brass body and tongue with hard drawn steel spring, fixed in floor with 140 mm cover plate |
| 72 | Sheet glass ordinary quality and glazing with oil putty in pane, 3 mm thick S&F |
| 73 | Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed |
| 74 | S&F Galvanised steel wire cloth. 0.63 mm nominal dia of wire and average width of aperture 1.40mm |
| 75 | S&F harrison rails, mild steel chromium plated with fixing brackets, stops , rollers etc |
| 76 | S&F of 1st class softwood moulding as in cornices, bedding and gluding in pocket of window but sectional area not Exc. 6 sq. cm, (0.43 mtr in each pocket) |
| 77 | S&F of 1st class hardwood Beading, straight (any size) for glazed or gauzed joinery,renewed, including mitres etc..and removing old beads |
| 78 | Running welding in repair, thickness of metal to be welded should not exceed 6mm |
| 79 | Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (unreinforcement) |
| 80 | M&L broken brick Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface |
| 81 | Providing 55 mm Cement concrete type B-1, 1:2:4 (12.5mm graded aggregate) |
| 82 | Finishing cement conrete surface even and smooth using extra cement |
| 83 | Removing building material to a distancce of 500m or under 500 meter |
| 84 | Removing building materials etc. to a distance of 100m or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination |
| 85 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 86 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to removedust, etc |
| 87 | Apply brushing neat cement slurry 3.0 Kg/sm of cement |
| 88 | Screed bed or bedding layer of mortar 25mm thick |
| 89 | laying floor finish 1:6 ratio |
| 90 | Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match |
| 91 | Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match |
| 92 | S&F Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match |
| 93 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping Rough finished surfaces of finished concrete |
| 94 | S/F of Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 95 | Reinforced cement concrete type B1 1:2:4 (12.5 mm graded aggregate (nominal mix) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete |
| 96 | M&L Brick work with subclass ‘B’ bricks, straight orcurved on plan exc 6m mean radius built in 1:6 mix cement motar using 100 % coarse sand. |
| 97 | M&L Brick work with subclass ‘B’ bricks, straight etc. built in cement motar in 1\\"4 mix cement motar (using 100 % coarse sand) half brick thick wall. |
| 98 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth |
| 99 | Cutting holes in brick walls built in mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required exc half brick but not exc. On ebricks. |
| 100 | S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm |
| 101 | S&F of Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete |
| 102 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation and getting out soft/loose soil. |
| 103 | M&L for Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces |
| 104 | Cutting holes into or through brick walls built in buit in brick wall built in cement motar or cement lime mortar and stone walls built in cement mortar 1:3 or cement concrete 1:2:4 type B-I (Superficale area 150 sqCm but n exc 400 sqCM) |
| 105 | Taking down old damaged cement plaster on brick walls including raking out joints, hacking for key serubbing down with water etc. |
| 106 | Renderrring 12mm thick cement plaster in 1:6 mix cement mortar on wall |
| 107 | M&L of Setting coat 3mm thick, trowelled to even and smooth finish |
| 108 | Dubbing out average10mm thick on irregular face of walls ratio 1:6 |
| 109 | Add to deduct for each 5mm thickness over |
| 110 | S&F of GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste |
| 111 | Rendering 10mm thick cement plaster in 1:4 mix cement mortar in celing |
| 112 | M&L 3 mm thick wall care putty on wall |
| 113 | M&L 3 mm thick wall care putty on Celiling |
| 114 | M&L of MS joints, channel, angle, or Fee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) for roof purlin fixed in cement concrete |
| 115 | S&F of Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging; also fastening and fixing complete |
| 116 | Preparation of new plastered surface on walls |
| 117 | Distempering walls with distemper oil emulsion, white on walls |
| 118 | Preparation of new plastered surface on ceiling |
| 119 | white washing & colour washing 02 coat of white wash on ceiling |
| 120 | Preparation of new plastered surface on walls |
| 121 | white washing & colour washing 02 coat of Colour wash on wall Please Enable Macros to View BoQ information |
