|
| 1 | Dismantling & Removing old tile cladding from walls including stacking the useful materials for reuse and removing the debris within 50m lead with cost of all labour etc. complete in all respect as directed by the Engineer-in-charge. |
| 2 | Providing GSB Gr-vi materials, spreading in uniform layers with motor grader, mixing by mix in place method at OMC and compacting with vibratory roller to achieve the desired density including cost, conveyance, royality EMF,DMF and aditinal charges of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Clause - 401 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 3 | Earth work in excavation of foundation trenches in hard soil including dressing of sides and levelling the bed and depositing the excavated materials away from the work site within initial lead & lifts etc. complete as directed by the Engineer in charge. |
| 4 | Supplying and filling in foundation and plinth with sand, laying in layers, well watered and rammed including cost, conveyance, royalties and taxes of all materials, cost of all labour and T&P,Cess etc. complete in all respect as per direction by the Engineer in charge. |
| 5 | Providing and laying PCC (1:3:6) in foundation and floors using 4cm size crushed stone granite aggregates including laying in layers, ramming, watering and curing etc. complete including cost, conveyance, royalties, EMF,DMF and aditinal charges of all materials and cost of all labours, T&P,Cess etc complete as per the direction of the Engineer -in –charge. |
| 6 | Plain Cement Concrete of proportion (1:2:4) foundation and floors using 12mm size hard black hand broken granite (C.B) chips of approved quality from approved quarry, free from skin, including hosting, lowering and laying compacting concrete in layers not exceeding 15 cm (6\\") thick to required level ramming watering curing etc. including cost, conveyance, royalty and EMF,DMF and aditinal charges of all materials with all labour with T&P,Cess required for the work etc. complete including dewatering if required as per drawing and Technical specification and as directed by the Engineer-in-Charge. |
| 7 | Fly ash brick masonry in foundation with cement mortar (1:6) in Superstructure using fly ash bricks of “23cmx11cmx8cm\\" size having a crushing strength of not less than 75 Kg. Per Sq. Cm. including immersing in water till saturation before use, Including splays cutting, circular molding, chamfering and corbelling and all similar type of operations with all necessary projections watering and curing etc. complete including cost and conveyance royalty and EMF,DMF and aditinal charges of all materials and labour with T&P,Cess required for the work etc. complete in all respect as per drawing and Technical specification and as directed by the Engineer-in-Charge. |
| 8 | Fly ash brick masonry in cement mortar (1:6) in Superstructure using clamp burnt bricks of “23cmx11cmx8cm\\" size having a crushing strength of not less than 75 Kg. Per Sq. Cm. including immersing in water till saturation before use, Including splays cutting, circular molding, chamfering and corbelling and all similar type of operations with all necessary projections watering and curing etc. complete including cost and conveyance royalty and EMF,DMF and aditinal charges of all materials and labour with T&P,Cess required for the work etc. complete in all respect in all floors as per drawing and Technical specification and as directed by the Engineer-in-Charge. |
| 9 | Plain Cement Concrete of proportion (1:2:4) foundation and floors using 12mm size hard black hand broken granite (C.B) chips of approved quality from approved quarry, free from skin, including hosting, lowering and laying compacting concrete in layers not |
| 10 | R.C.C. work of M.20 using 20 mm & down graded size crushed stone granite aggregates including hoisting lowering, laying concrete and compacting by using vibrators, watering, curing and necessary centring & shuttering for smoth finishing of work excluding steel reinforcement work including cost, conveyance, royalty and EMF,DMF and aditinal charges of all materials with all labour with T&P,Cess required for the work etc. complete including dewatering if required as per drawing and Technical specification and as directed by the Engineer-in-Charge. (Column base Footeng) |
| 11 | Plinth band |
| 12 | Columns, Beam |
| 13 | Roof slab |
| 14 | Straightening cutting, bending & binding of bent up or coiled rods confirming to I.S. 432 for Plain and 1785 for Tor steel and binding, tying the grills, hoisting, lowering and placing in proper position including cost, conveyance of all materials and cost of all labour with all T&P,Cess required for the work etc. complete as directed by the Engineer- in-Charge. |
| 15 | Providing 12 mm thick Cement Plaster with C.M. (1:6) on inside surface of wall with screened and washed sharp sand for mortar and finished over brick masonary to the smooth surface walls after raking out the joint including watering and curing ,roughing of corners, providing grooves where ever necessary with cost and conveyance royalty and EMF,DMF and aditinal charges of all materials and labour with T&P, Cess required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge |
| 16 | Providing 16 mm thick Cement Plaster with C.M. (1:6) on inside surface of wall with screened and washed sharp sand for mortar and finished over brick masonary to the smooth surface walls after raking out the joint including watering and curing ,roughing of corners, providing grooves where ever necessary with cost and conveyance royalty and EMF,DMF and aditinal charges of all materials and labour with T&P,Cess required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge |
| 17 | Providing 6 mm thick C.P. with C.M. (1:4) on inside surface of exposed RCC with sand for mortar and finished smooth to RCC work after closed deep chipping & slurry treatment including watering and curing etc complete with cost, conveyance, royalty and EMF,DMF and aditinal charges of all materials with all labour with T&P,Cess required for the work etc. complete including dewatering if required as per drawing and Technical specification and as directed by the Engineer-in-Charge. |
| 18 | Providing 2.5cm thick Grading Concrete over roof slab with cement concrete (1:2:2) using 6mm size crushed stone granite aggregates including laying, watering and curing etc. complete including cost, conveyance, royalty and EMF,DMF and aditinal charges of all materials with all labour with T&P,Cess required for the work etc. complete including dewatering if required as per drawing and Technical specification and as directed by the Engineer-in-Charge.( Ground Floor) |
| 19 | First Floor |
| 20 | Supplying, fitting and fixing 600 x 600 mm Mat Full body vitrified tiles placed with 3mm wide spacer to be filled with epoxy sealant make (Somany techstone crema/ Johnson SLP mat ivory / RAK Coarstone crema / Kajaria Delphi Crema mat ) Epoxy Sealant : MYK/SIKA/SOMANY to match the shades of the tile including cost of all materials, , labour cess, T&P, EMF,DMF and aditinal charges etc. required for the work complete in all respect as directed by the Engineer in charge.(As per Proceeding of C.C.E. Level committee meeting held on dt. 12.02.2024 at 11.30 A.M.) |
| 21 | Supplying, fitting, fixing of Vitrified industrial tiles (30cm x 30cm) in floors over 20mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost, conveyance and EMF,DMF and aditinal charges of all materials, cost of all labour, T&P,Cess etc. complete as per the direction of the Engineer-in-charge. |
| 22 | Providing, fitting, fixing 1200 mm high and 150mm in skirting 600 x 600 mm polished glazed vitrified tiles to be laid with 3mm spacer to be filled with epoxy sealant. Shade: White Make ( Somany Glacier White / Johnson Super white / RAK Jazz white / Kajaria pulido blanco Adhesive for fixing wall tiles : MYK laticrete / Roffe / Somany Epoxy Sealant : MYK/SIKA/Somany ). including rubbing and polishing etc. complete with cost, conveyance, royalties of all materials all ,labour cess complete in all respects.(As per Proceeding of C.C.E. Level committee meeting held on dt. 12.02.2024 at 11.30 A.M.) |
| 23 | Supplying, fitting, fixing of Granite tiles of size 0.1 to 0.4sqm (Pulished) in floors over 20mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost, royalty and EMF,DMF and aditinal charges of all materials with all labour with T&P,Cess required for the work etc. complete including dewatering if required as per drawing and Technical specification and as directed by the Engineer-in-Charge. |
| 24 | Supplying and fitting,fixing of Un-plasticised poly vinyl Choloride (UPVC) (FENESTA / NCL VEKA LTD) three Track - Three panel sliding window - 60 series duly manufactured using UPVC reinforced profiles of 108mm x 45 mm x 2.5mm for outer frames and window Sash of 39 mm x 58 mm x 2.5 mm capable of mounting single glazing system,structurally reinforced with hot dip galavanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window frame shall be fitted with 6 mm thick clear toughned glass of SAINT-GOBIN make duly fixed with EPDM weathering seal resistant and the system is to installed using Reinforced Large Coupler at the site using anchor fasteners,silicon rubber sealant ,easy glazing / deglazing at site etc. including cost and conveyance of all materials,accessories,labour charges,materials and product conforming to ASTM D 638-14 ,EN-477-95 and other applicable codes and standards. |
| 25 | Supplying and fitting,fixing of Un-plasticised poly vinyl Choloride (UPVC) (FENESTA / NCL VEKA LTD)Ventilator / Top Hung -60 series duly manufacured using UPVC reinforced profile of 60 mm x 55 mm x 2.5 mm for outer frames 75 mmx 60 mm x 2.25 mm for casement window sash profile capable of mounting single glazing system , structurally reinforced with hot dip galavanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the widow sash shall be fitted fitted with 6 mm thick clear toughned glass of SAINT-GOBAIN Makke duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No. per set of sashes and the system is to be installed at the site using anchor fasteners,silicon rubber sealant ,easy glazing / deglazing at site etc. including cost and conveyance of all materials,accessories,labour charges,materials and product conforming to ASTM D 638-14 ,EN-477-95 and other applicable codes and standards. |
| 26 | Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete |
| 27 | Factory made FRP Door / Window frame (alternately called GRP) of size 75mmx100mm fabricated using E-glass Chopped Strand Mat (CSM) U.V stabilised Inopthalic Gel coat and impregnated with Inopthalic resin. The thickness of the GRP skins shall not be less than 2.00mm. The doorframe consists of four segments, which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The GRP frame shall be provided with wooden reinforcement on six locations for high screw holding capacity for for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement. The finish of door frame will be plain and different colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge. |
| 28 | Supplying of M.S. Grills etc including cost,conveyance, royalty and EMF,DMF and aditinal charges of all materials and labour with T&P required for the work etc. complete in all respect in all floors as per drawing and Technical specification and as directed by the Engineer-in-Charge. |
| 29 | Supplying of M.S.Doors, M.S. Gate etc including cost, conveyance, royalty and EMF,DMF and aditinal charges of all materials and labour with T&P required for the work etc. complete in all respect in all floors as per drawing and Technical specification and as directed by the Engineer-in-Charge. |
| 30 | Provuiding and fitting and fixing wiremesh of size 50mm x 25 mm x 13 gauge for windows etc. including sal wood beading with cost of nails, screws, beads and cost of wiremesh and T&P,Cess required for the work etc. complete in all respect as directed by the Engineer in charge. |
| 31 | Providing fitting, fixing of partition walling OEL anodized Al. section of 9210 and 9207 as single groove and double groove respectively as horizontal and vertical member and OEL section 4660 as tapered clip for fixing of 12mm thick pre-laminated board and jointing angle no 1855 etc. including all cost of labour, T&P,Cess hire charges of drilling machine, labour charges etc. complete as per direction of Engineer-in-charge. |
| 32 | Providing fitting, fixing of Aluminium Door with OEL anodized Al. door section of 9202 as vertical member, 9200 as top and bottom member. 9232 as middle member 12mm thick pre-laminated board fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 with Automatic Door closure, 6 Lever MORTICE Lock, Door Stopper, Handle etc. including all cost of labour, T&P, Cess hire charges of drilling machine, labour charges etc. complete as per direction of Engineer-in-charge. |
| 33 | Supplying, fitting and fixing hand railing of Stainless steel of 304 grade using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, cost of all labour, T&P,Cess etc. required for the complete in all respect as per direction of the Engineer-in-charge. |
| 34 | Supplying of M.S. Angle / square bar of approved size, febricatrd to fix GCI sheets on roof etc including cost, conveyance of all materials complete as per the instruction of Engineer-in-Charge . |
| 35 | Supplying, Fitting & Fixing of profile colour Sheet including cost of fittings etc. including cost, conveyance of all materials and labour for fitting fixing etc.complete as per the instruction of Engineer-in-Charge . |
| 36 | Finishing plastered surfaces with cement putty (water based) of approved make on outside plaster / concrete surface and finishing the surface smooth and even by sand papering to receive paint in walls, at all heights with staging wherever necessary with cost, conveyance, EMF,DMF and aditinal charges of all materials, cost of all labour, all T&P,Cess etc. required for the work complete in all respect as per the direction of the Engineer-in-charge.( Ground Floor) |
| 37 | First Floor |
| 38 | Painting two coats with approved weather seal paints of approved colour, shade on wall surface over a coat of wall primer including sand papering, polishing the surface, cost, conveyances,EMF,DMF and aditinal charges of all materials and cost of all labour with T&P,Cess etc, complete as per specification & direction of Engineer-in-charge.( Ground Floor) |
| 39 | First Floor |
| 40 | Painting two coats with plastic emulsion paint to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, EMF,DMF and aditinal charges of all materials, cost of all labour, T&P,Cess etc. complete as per the direction of the Engineer-in-charge. ( Ground Floor) |
| 41 | First Floor |
| 42 | Painting two coats with approved enamel paints of approved colour, shade over a coat of primer over new Iron work including sand papering, polishing the surface, cost, conveyances, EMF,DMF and aditinal charges of all materials and cost of all labour with T&P,Cess etc, complete as per specification & direction of Engineer-in-charge. ( Ground Floor) |
| 43 | First Floor |
| 44 | Providing & laying of 80mm thick cement concrete interlocking paver block of m-40 grade and approved make variety colour and size made by block making machine with strong, vibratory compaction of approved design and shape , laid in required colour and pattern over 50mm thick including cost convayance royality labour with T&P,Cess etc complete as per specification & direction of Engineer-in-charge. |
| 45 | Providing, supplying & fixing of 80mm dia heavy gauge G.I pipe for cow catcher (6.5mx1.5m) including labour for lifting ,and placing in position to required length, pre fabricating by cutting to required length,priming including cost of all materials, cost of all labour,loading unloading at site,all accessories,T&P,Cess required for the work complete in all respect as directed by engineer in charge. |
| 46 | Supplying, fitting & fixing of 25x6 MS Flat including labour for lifting and placing in position to required length,pre fabricating by cutting to require length,priming including cost of all materials,cost of all labour , loading ,unloading ,at site,all accessories,T&P,Cess required for the work complete in all respect as directed by engineer in charge. |
| 47 | EI Work Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI with 20 mm dia HMS FRLS PVC conduit ISI marked Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal 6A modular type (anti bactorial & flame retradant type) switch ISI marked Make-Schneider(Zencelo)/legrand( Myrius-NEXT GEN) /Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) (anti bactorial & flame retradant type) Make-Schneider(Zencelo)/legrand( Myrius-NEXT GEN) /Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. . All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.Group-A. L.P.- 7 F.P.- C.B.- |
| 48 | Group-B. L.P.-15 F.P.-11 C.B.- |
| 49 | Group-C L.P.- 8 F.P. 12 C.B.- |
| 50 | Recessed wiring for 5/6Amp modular Socket outlet with 2x1.5mm2 FR PVC insualted single core multistand copper conductor of ISI marked in recess 20mm dia Non-metalic PVC flexible conduit with piano type switch,phenolic laminated sheet suitable size ISI marked on modular GI box and earthing point with 1x1.5sqmm FR PVC insulated single core multistand copper conductor for loap earthing etc.as required(make of wire-Finolex/L&T/Anchor/ Havels/V-Guard) Group-A. |
| 51 | On Existing board. |
| 52 | Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit. a)(2X1.5+1X1.5)SQMM WIRE |
| 53 | b)2x2.5mm2+1x1.5mm2(1.8.2.SOR-17) |
| 54 | b)2x4mm2+1x1.5mm2(1.8.3.SOR-17) |
| 55 | c)2x6mm2+1x2.5mm2 (1.8.4.SOR-17) |
| 56 | Supplying and fixing Modular G.l. box of 18 SWG on surface or in recess with Modular base & cover for module in front including providing and fixing 6pin 15/16Amp modular socket outlet and SP 15/16Amp oneway modular switch Make-Havells(Coral/Fabio)/L&T(entice)/ Legrand/Panasonic (vision/urban)Eq. (Power Plug) with indicator connection, painting etc as required.Make-Make-Panasonic(vision/ urban)/ Havells(Coral/Fabio)/L&T/ Legrand(myrius/Arteor)/ Eq. |
| 57 | S/F.of 48\\"A.C.Ceiling fans complete with ISI marked (Havells (Spacer/Velocity) /Usha Allure/ Striker / Orient (Jazz)/Bajaj-Elegance (Ivory)/ crompton Aura plus(ivory)/Eq. make e including all accessories & connection as per direction of Engineer-in-charge. |
| 58 | Supplying and fixing of stepped type modular regulator of ISI marked(ROMA(Urban)/Havells(Coral/Fabio)/L&T/ Legrand/Panasonic (vision/urban)Eq.) on Modular G.l. box of 18 SWG on surface or in recess with suitable size Modular base & cover module in front including providing and fixing connection, painting etc as required.(For light plugs to be used in non residential buildings) |
| 59 | S/F of 20W/18W LED batten light of crompton/Havells /Eq. make. |
| 60 | S/F.of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/1987 in place of Ceiling rose. |
| 61 | S/F.of 9W/10Wt.LED lamps of Havels/Crompton/Phlips/Eq. make. |
| 62 | S/F of 1x15W surface celing LED light made up of pressure die cast housing with secondary optics ,IP66 protection with fixing on ceiling of Havells make(COSMO/TRIMLED NXT) or Equivalent of Crompton/Philips/Eq. and Connection as per direction of Engineer-in-Charge. |
| 63 | S/F of 63AMP DP MCB of C series of make -L&K / Legrand/Hager /C&S with metalic cover and accessories complete with connection.( for Security guard room) |
| 64 | Earthing with GI earth pipe 3 meter long,40mm dia incluiding accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/coke and salt as required |
| 65 | Providing and fixing 6 SWG GI wire on surface or in recess for loop earthing along with cables etc as required.(for lighting pole loop earthing) |
| 66 | Providing and fixing 25mm x 5 mm GI strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge. ( |
| 67 | AIO SOLAR STREET LIGHTSupply of Elegant look 60 W (+/-10°/o) AIO LED Solar Street lights having extruded aluminum housing, 180Wp Or more Mono Crystalline Panel/Laminates fîxed on the top of the luminaire housing, maintenance free 12.8 volts 78 Ah or more LiFePO4 battery (BIS certifîed), BMS, MPPT charge controller, PIR sensor to provide 2 days (24 hrs.) back up. The luminaire is having IP 65 protection for critical œmponents, IK 07 and having lumen output of • 10000 lumen and having minimum lumen effîœcy >160 lm/w) as per LM 79 report third party NABL lab to justify the lumen output & lumen effîcacy. Lenses should be provided on the LED chip for better lighting distûbution to avoid glare on human eyes. Both the luminaim and Mono Crystalline Panel must be manufactured in India. The Solar lighting company must submit the third party NABL lab reports lo justify the lumen efficacy. luminaire outpuL IK 07 and IP 65 protection. The Luminaire should be supplied along with adjustabte type mounting bracket which can be fitted directly on the pole. The Solar Street light and solar panel having capacity of 180 Wp or more must be designed to take the wind load at 180 KM/HR wind speed (As per wind load test report). The Solar lighting manufacturer must submit the declaration letter by mentioning that complete solar light and the solar panel are manufactured in India and warranty certificate on their company's letterhead by mentioning warranty period as 5 years and necessary aftersales service will be provided through their toll-free base service network located within 100 KM from the project site. The Solar Street light manufacturer should have own NABL accredited laboratory.The following test reports must be submitted for the technical acceptance of the products.1.LM 79 REPORT (Third party NABL lab only) , 2. IK 07 (Report of Third party NABL lab only for any wattage of AIO solar light ) , 3. IP 65 (Report of Third party NABL lab only , 4. Wind load test report of AIO Street light having 180 Wp or more capacity Solar Mono Panel suitäble for 180 KM/Hr wind Spœd.The AIO solar street light must complies to the following |
| 68 | 1. EN50530 - MPPT Efficiency, 2. IEC61547, 3. IEC61000-3-2 - EMC, 4. IEC60598-2-3 .5. IEC 62109-1, (The necessary test reports of third party NABL lab against the above must be submitted for any wattage of AIO Solar street lights for acœptance of product/TDS approval pûor to start of the work. AII the test reports must be in the name of solar lighting œmpany)Make-{Philips/PanasonicWipro/CromptordBajaj/Havells or equivalent).NB: Tho cost includes 5 years CMC includlng rspalrf Malptenënce/ replacement of the product In caee of any defect.Supply of 8Mtr long hot dip galvanised Octagonal Pole having base dia 155mm and top dia 70mm and plate thickness 4mm and more complete with base plate and EN 8 foundation bolts to withstand 180Km/Hr and more wind speed considering the weight and dimension of 1No. 60W AIO Solar lights to fitted on the pole at two different heights (one at top of pole and second light on differential bracket( |
| 69 | Construction of RCC foundation of M20 grade RCC and Fe 415 reinforcement in the foundation by considering the SBC 10T per sqmtr and fixing four Nos. EN8 foundation bolts Bolts for installation of solar lights in that foundation as per direction of E.IC. |
| 70 | POST TOP LANTERN LIGHT Supply of 3Mtr Ornamental MS pole (bottom section 1mtr long, 114mm dia 3.65mm thick pipe, : Top section 2mtr long ,90mm dia Make Halonix (Pro Slice Pole)/bajaj/Havells/Halonix or Equivalent make |
| 71 | Cement concreting for pole CC foundation 1:3:6 size by using 4cm size HBG metal(=0.45X0.45x1.5=0.3037Cum @6185.84=1878.38or1878.00 |
| 72 | S/F 1X40W New generation, LED post-top latern , energy saving, environmental friendly, long life aesthetically designed withsymmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source. of Havells(RUBY CLEAR/CORAL OPAL)/crompton/Halonix make with suitable size of G.I pipe for Fitting and all accessories & Connection |
| 73 | S/I/T&Commissioning of LT OUT DOOR FLOOR mounted cubical type IP66 based panel made out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint is designed as G.A drawing. (FOR USE) with 63A TPN MCB 01 NO,1 no. Astronomical digital timer, AUTO MANUAL(with start and stop push button) SELECTOR 63 A 3P contactor, OLR,RYB,ON,OFF trip indication, Type-II SPD 40ka ,,04 nos 10A 4P MCB,C,10KA as outgoing MCB legrand dx3/ schneider acti9 A9N/ Siemens betaguard/ ABB ( SB 200) as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period 1 years of acceptance of materials |
| 74 | Supplying and laying of one number PVC insulated armoured and PVC sheathed XLPE AL. conductor power cable of 1.1 KV grade POLYCAB/FINOLEX/HAVELLS/KEI/RR Kabel/Gloster of following size cables as per direction of Engg.-in-Charge.Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials4core x 16 sq mm (INDOOR buildng PANEL TO. TIMER PANEL) |
| 75 | Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge. |
| 76 | Supplying and making end termination with 4 core x16 sq mm brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge. |
| 77 | Providing,fixing and laying of fallowing dia PN10 HDPE pipe (medium class) in ground complete with fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge. 32mm |
| 78 | S/F of 10 sq.mm 2 Core Alluminium, armoured LT power Cable of XLPE insulated 650/1100 grade(make-Havells/Polycab)(for post top 3mtr pole connection) |
| 79 | PH Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge. 100mm dia P.V.C. pipe |
| 80 | 150mm dia P.V.C. pipe |
| 81 | Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification. MH size 0.91m x 0.91 m with 0.45 m (18” dia RCC Cover ) |
| 82 | Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site. |
| 83 | Rain Water Harvesting System Supplying all materials, labour, T&P and fitting and fixing U-PVC, SWR soil waste ventilating pipes and fitting of the following outside diameter conforming to 13592/1992 to walls with nails bobbins and wooden plugs or laying in trenches including with supply of approved rubber lubricant by non-heat application method as per manufactures specification testing earth work in excavation in all kinds of soil and refilling of trenches all complete as per specification and direction of the Engineer in charge.110mm U-PVC SWR Pipe (Ashirvad/Supreme Make) |
| 84 | 110mm U-PVC Plain bend (Ori Plast/Finolex/Supreme Make) |
| 85 | 110mm U-PVC Socket (Ori Plast/Finolex/Supreme Make) |
| 86 | 125mm CP grating |
| 87 | Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge.160mm dia P.V.C. |
| 88 | Supplying all materials labour T&P and constructing 1.80m dia x 2.60 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site. |
| 89 | Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge. Inside size 76cmx76cmx46cm with 18” dia RCC MH cover Please Enable Macros to View BoQ information |
