|
| 1 | Sch A Part -I Earthwork,Site clearance,Demolition and Dismantling |
| 2 | Excavating in post holes (or similar holes) each n.exc 0.5 cum getting out returing filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm in hard and dense soil all as specified and directed. |
| 3 | Dismantling of wall and ceiling boards( fibre pulp insulation etc) any thickness including cover fillets,complete all as specified and as directed. |
| 4 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons laid bedded and pointed in any motar completed all as specified and directed. |
| 5 | Demolition of Brickwork of stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles all as directed. |
| 6 | Dismantling old particle boards/plywood as in shelves boarding, any description, fixed in any position with nails complete all as specified and directed complete all as specified and directed. |
| 7 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for and removing rubbish to a distance n.exc 50m at low lying area complete all as specified and as directed. |
| 8 | Sch A Part -II B/R Works |
| 9 | M&L for PCC 1:3:6 type C2 using 40mm graded aggregates in foundation filling and Post all as specified and directed. |
| 10 | S& F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes all as specified and directed. |
| 11 | M&L for MS work as in tubular post,roof trusses (framed), trussed, purlins, (pipe/post,beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410 -W (Gde- E- 250) complete all as specified. |
| 12 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,exc 5cm, n exc 10cm long and diameter of neck 16 to 20mm complete all as specified and directed. |
| 13 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified and directed(Gde-Fe-410 GdeE-250 quality and complete all as directed. |
| 14 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 15 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in ridge/flusing/eves board of width or girth not less than 600mm complete all as specified and as directed. |
| 16 | M&L preparation of new steel surfaces of any description, over 10cm in width or girth,not otherwise described and apply two coats of synthetic enamel paints over a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 17 | M & L Preparation of old steel surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint etc complete all as specified and as directed. |
| 18 | S&F powder coated GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre in size 600mmx 600mm suspended with 12mm thick GI wire work for false ceiling all as specified and directed. |
| 19 | S&F of non asbestos fibre cement designer building boards fixed or laid/inserted to timber/GI/ Aluminium framework for fixing in 600mm x 600mm grid (frame work for ceiling shall be measured and paid separately) 06mm thick in ceiling fixed as per manufacturers instructions and accoustic purposes, 60x60 cm in size, fixth frame work with aluminium staples on snap grid by screw etc complete. |
| 20 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but notbacking), removing serviceable tiles to store and rubbish off the premises all as specified and directed by Engr-in-Charge |
| 21 | Non - skid Ceramic tiles 7 to8 mm thick colour premium quality tiles of area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) all as specified and directed by Engr-in-Charge. |
| 22 | M&L Ceramic tiles 7 to 8 mm thick premium quality joint free light shade area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchset and jointed in neat cement slurry and pointed in white or coloured cement to match shade over and including screed bed 15 mm thick in CM 1:6 all as specified and directed . |
| 23 | M&L Glazed ceramic coloured designer seamless tiles of premium quality of 450X300X7 mm thick on vertical surface as in skirting, dado set and jointed with neat cement slurry and pointed in white or coloured cement to match with the surface over and including 10mm thick screed in CM 1:3all as specified and directed . |
| 24 | M&L Vitrified tiles light shade double charge10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match shade over and including screed bed 15mm thick in CM 1:6 all as specified and directed. |
| 25 | M&L Vitrified tiles light shade double charge 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, as on vertical surfaces etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match shade over and including 10mm thick screed in CM 1:3 all as specified and directed . |
| 26 | M & L for Machine cut kota stone slab flooring 16 to 18 mm thick mirror polishing to give high gloss finish over cement screed bed 20mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specifed and as directed. |
| 27 | M&L for Granite of thickness 16 to 18 mm (of any type) work (table rubbed and polishedin steps, jambs, pillars, window-cills, cooking platform sand like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to matchwith shade of granite, complete all as specified and as directed. |
| 28 | S&F in repairs PVC valve less syphonic action type flushing cistern low level white, dual flush, ISI marked (IS: 7231) with PVC inlet ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32mm dia PVC long bend for squat pattern etc , set with concrete and making good to floor complete all as specified and as directed. |
| 29 | S&F in repairs Vitreous china water closet pan ( pedestal pattern), white including fixing bolts etc including plastic water closet seat, black/white closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and as directed.. |
| 30 | S&F in repairs Vitreous China half stall urinals, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, magnum urinal spreader, pointing around urinal back in cement; flush pipe, grating and Union for discharge pipe,complete all as specified and as directed. |
| 31 | S&F in repairs Vitreous China Wash hand basin white Oval shape, size 580 mm x 450 mm size, excluding taps, chain & plug & porcelain stopper but incl brackets, 40/32 mm dia chromium plate coupling 32 mm dia, cutting for and pinning ends of brackets or erecting stand complete all as specified and as directed. |
| 32 | S&F in repair Fancy type pillar taps, 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed as in repair complete all as specified and as directed. |
| 33 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 34 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 35 | S&F in repair fancy type 15mm bore, chromium plated bib taps cast copper alloy with crutch or butterfly handle screwed down for iron pipe complete all as specified and as directed. |
| 36 | S&F in repairs fancy type chromium plated 15 mm bore stop valve/angle cock cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed. |
| 37 | S&F in repairs tubular towel rail brass chromium plated , 20mm dia, 60cm long between flanges in repairs complete all as specified and as directed. |
| 38 | S&F in repairs CP soap dish complete all as directed |
| 39 | S&F in repairs PVC (SWR) floor trap 75 mm, plain with CP grating including joining and solvent cement complete all as specified and as directed. |
| 40 | M& L Cutting chases,pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps cills, sunshades, shelves,lintels etc; and cutting chases for concealed water tubing and making good, cutting not exc.10cm girth complete all as specified and as directed. |
| 41 | Taking up or down steel tubing pipe with connections for cleaning for refixing or removing or storeyard complete of bore 15mm complete all as specified and as directed. |
| 42 | Taking up or down steel tubing with connections for cleaning for refixing or removing or storeyard complete of bore 20mm complete all as specified and as directed. |
| 43 | S&F Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15mm complete all as specified and as directed. |
| 44 | S&F Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs,unions etc.) of nominal bore 20mm complete all as specified and as directed. |
| 45 | M & L for brick work with sub class 'B' old size brick straight or curved on plan exc 6m mean radius built in cement mortar (1:6) all as specified and directed. |
| 46 | Taking down cement plaster of any description on brick or stone walls, Chajjas etc., including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed. |
| 47 | Material & Labour for 15mm thick rendering in Cement Mortar 1:6 on stone masonry surfaces, finished even and smooth without using any extra cement complete all as specified and as directed. |
| 48 | Material & Labour for 15mm thick rendering in two layer each of (10+5mm) thick Cement Mortar 1:4 on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing with water proofing compound 2% by weight of cement finished even and smooth without using any extra cement. (Note- Water proofing compound measured seperately) complete all as specified and as directed. |
| 49 | Supply only approved integral water proofing compound. |
| 50 | M&L for complete removal of existing treatment or old surface of external wall by brooming down or with steel wire brushing, scraping down smoke soot, moulds and applying two or more coats of 100% Premium acrylic emulsion paint (ISI marked Weather Coat) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm including crack filling with external wall care putty etc complete all as specified and directed. |
| 51 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces.complete and including all necessary scaffolding,complete all as specified and as directed. |
| 52 | M&L for preparation of newely plastered wall surfaces and applying two coats of Oil bound distemper over a coat of alkali resistant primer over 1mm wall care putty complete all as specified and as directed. |
| 53 | M & L for Complete removal of existing treatment of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails, making good holes with , filling cracks with birla white putty and brooming to remove all dirt etc and applying two coats of distemper over one coat of alkali resistant primer over 1mm wall care putty complete all as specified and as directed. |
| 54 | M&L for preparation of newely plastered wall surfaces and applying two coats of Oil bound distemper over a coat of alkali resistant primer over 1mm (avg) wall care putty all as specified and directed. |
| 55 | M & L for Complete removal of existing treatment of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails, making good holes with , filling cracks with birla white putty and brooming to remove all dirt etc and applying two coats of distemper over one coat of alkali resistant primer over 1mm wall care putty complete all as specified and as directed. |
| 56 | M & L Preparation of old wood and wooden based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint etc omplete all as specified and as directed. |
| 57 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removing rubbish to a distance n.exc 50m at low lying area complete all as specified and as directed. |
| 58 | M & L for 50mm thick cement concrete (1:3:6) type C-1 ( using 20mm graded agg.) as in floor finishing/Plinth protection cement concrete all as specified and diredted. |
| 59 | M&L Reinforced cement concrete Type B1 1:2:4 (20 mm graded aggregate)Slabs supported on walls, beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like |
| 60 | S&F mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9mm dia and confirming to grade 410-O complete all as specified and directed by Engr-in-charge. |
| 61 | S&F Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick. complete all as specified and directed by Engr-in-charge. |
| 62 | Taking down chowkats or frames with shutters n.exc 1.50Sqm (without taking off shutters from the frames). |
| 63 | Taking down chowkats or frame with shutters exc 1.50 Sqm and n.exc 4 Sqm each. |
| 64 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade). calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity Index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp-ressive strength of 58 N/mm², modules of elasticity 900 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, nd fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge (MS. hold fast/lugs or SS dash fasteners shall be paid for separately)Note For WPC solid door/window frames minus 5mm tolerance in dimensione depth and width of profile shall be acceptable Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made |
| 65 | Supply and fixing factory made single extruded WPC(Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm², modulus of elasticity 850 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 66 | S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc.complete all as specified and as directed. |
| 67 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P brass/ stainless steel screws including hinges and handles all complete all as specified and as directed Engineer-in-Chief. |
| 68 | S&F SS butt hinges 100mm size, medium weight cold rolled mild steel complete all as directed. |
| 69 | S&F 150 mm length aluminum, anodised, barrel tower bolts of extruded section complete all as directed. |
| 70 | S&F 100 mm length aluminum, anodised, barrel tower bolts of extruded section complete all as directed. |
| 71 | S&F 100mm size of aluminum handles, cast type anodised complete all as directed. |
| 72 | S&F 125 mm size of aluminum handles, cast type anodised complete all as directed. |
| 73 | M&L for double action floor spring hydraulically regulated made up of min 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made up of brass, other parts made of mild steel heavy duty and fixed,complete all as specified and as directed. |
| 74 | S&F repair tubular brass chromium plated decorative 20mm curtain rod fixing with brackets complete all as specified. |
| 75 | S&F for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples. |
| 76 | S&F 3.0 mm thick plain glass of selected quality and securing in metal / aluminium frame, complete all as specified and as directed. |
| 77 | S&F 5.5 mm thick plain glass of selected quality and securing in metal / aluminium frame, complete all as specified and as directed. |
| 78 | M&L for roughening surface of old concrete floor by picking, sweeping cleam and washing down with water to remove dust etc all as specified and directed by Engr-in-Charge. |
| 79 | M&L for coloured non skid premium quality ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) all as specified and directed by Engr-in-Charge. |
| 80 | S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including P or S trap (excluding flushing cistern and flush pipe) all as specified and directed by Engr-in-Charge. |
| 81 | S&F in repair Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union alongwith arm 125mm and flange all as specified and directed by Engr-in-Charge. |
| 82 | S&F in repair fancy type 15mm bore dia of conceled stop valves cast copper alloy screwed down high presure with crutch or butterfly handle screwed both ends for iron pipe or for unionsall as specified and directed by Engr-in-Charge. |
| 83 | S&F Sheet glass shelf/corner shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long as in repairs all as specified and directed by Engr-in-Charge. |
| 84 | Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., removal to Store (measured overall as fixed along the centre line over fittings and accessories) all as specified and directed by Engr-in-Charge. |
| 85 | S&F PVC (SWR) pipes single socketed 110mm bore dia in any lenth with rubber ring jointeds, laid in trenches or in floors all as specified and directed by Engr-in-Charge. |
| 86 | S&F PVC (SWR) pipes single socketed 75mm bore dia in any lenth with rubber ring jointeds, laid in trenches or in floors all as specified and directed by Engr-in-Charge. |
| 87 | S&F PVC (SWR) 110mm dia bend any raius all as specified and directed. |
| 88 | S&F PVC (SWR) 75mm dia bend any raius all as specified and directed. |
| 89 | S& F in repair 15mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed,complete all as specified and as directed. |
| 90 | S&F in repair 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed,complete all as specified and as directed. |
| 91 | M & L for Brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement motar (1:4) all as specified and directed. |
| 92 | S&F of Pressed steel frames 125 x 60 mm size for doors with one or more rebates including necessary fixing lugs, hinges, lock striking plate etc. all as specified and directed by Engr-in-Charge. |
| 93 | M& L for Plain Cement Concrete (1:3:6) Type C-1 using 20mm graded stone aggegate as in hold fast block, copping, filling in hollow door frame, bedblock, etc. all as specified and directed by Engr-in-Charge. |
| 94 | S&F Factory made solid panel wire guage PVC door shutter (min 3 Nos of panel) 30 mm thick (style) veneer colour consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling wii be wire guage. The wire guage shall be wrappedon an additional square 8 mm MS solid tube.This tube shall be welded to MS tube. The wire guage shall be stretched to tighten firmly, suppling & fixing in the frame at site as per specification & drawing. |
| 95 | S & F solid PVC door frame of size 50 x 47mm made out of 5mm single side prelam PVC sheet & edges will be painted to match with prelam sheet, reinforced with MS square tube, in opening all as specified and directed by Engr-in-Charge. |
| 96 | S&F factory made solid PVC moulded door designer shutter 30 mm thick comprising of With 30mm thick Wood free EPS in centre core, with 2,4 or 6 raised panel design with 2 mm thick moulded prelam PVC sheet on both face all as specified and directed by Engr-in-Charge |
| 97 | S/F, Solid PVC Wall Lining wooden finish consisting of 5mm thick coloured PVC sheet inclusive of solvent cement and preparing existing surface and fixing at site on as cupboard etc as specified and directed. |
| 98 | S/F 18mm thick Solid PVC Sandwich Panel with 1mm Plain PVC Sheet on both sides suitably fixed in M.S. angle frame work as per specification & drawing fixed as in shelving of cupboard etc all as specified and directed by the Engr-in-charge. |
| 99 | Taking down shutter of any description exc 1sqn but n. exc 2sqm each and refixing in same position including resecuring or easing and adjusting complete all as specified. |
| 100 | S& F Spring Hinge Cabinet SS Hydraulic Self Closing Hinges, Thickness: 2.1 - 2.5 mm, Size: 125mm complete all as directed. |
| 101 | S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as directed. |
| 102 | S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as directed. |
| 103 | S&F 100mm Hasp and staple, safety type,aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as directed. |
| 104 | M&L for Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 all as specified and directed by Engr-in-Charge. |
| 105 | M&L for PCC 1:4:8 type D2 using 40mm graded aggregates in foundation filling and mass concrete as in lean concrete as in PCC of foundation and Post. |
| 106 | M&L Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc.for post (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming Fe-410W(GdeE-250) quality B includng welding or riveting etc complete all as specified and as directed |
| 107 | M&L preparation of new steel surfaces of any description, over 10cm in width or girth,not otherwise described and apply two coats of synthetic enamel paints over a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 108 | M & L Preparation of old steel surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint etc |
| 109 | Sch A Part -III E/M Works |
| 110 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, includingfixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as specified and as directed. |
| 111 | M&L for point wiring for one light/fan/bell with single core PVC insulated and unsheathed stranded FRLS copper conductor cable 1100 volts grade size 1.5 Sqmm (nominal area) in and including PVC casing capping 25/20 mm width with one single core PVC insulated unsheathed 1.5 Sqmm (nominal area) stranded FRLS copper conductor as earth continuity wire and connected to earth dolly including PVC switch board on existing wall surface for one light/fan point /bell point controlled by one number one way switch & making good the disturbed surface to match with existing surface/wall complete all as specified and as directed. |
| 112 | All as per Item No. 111 here-in-before but for one 5 pin socket outlet 5 Amps on independent board with 1.5 Sqmm complete all as specified and as directed. |
| 113 | All as per Item No. 111 here-in-before but One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5 sq. mm size all as specified and as directed. |
| 114 | All as per Item 111 here-in-before but for one 5 pin socket outlet 15 Amps on independent board with 4 Sqmm copper cable FRLS & 4 Sqmm FRLS copper cable for earth continuity wire complete all as specified and as directed. |
| 115 | S&F for switch piano flush type 6 Amp single pole one way complete all as specified and as directed. |
| 116 | S&F for socket flush type 6 Amp single pole one way on same board complete all as specified and as directed. |
| 117 | S&F for switch socket combination 5 Pin 6 Amp universal complete all as specified and as directed. |
| 118 | S&F for switch socket combination 5 Pin, 6/15 Amp universal complete all as specified and as directed. |
| 119 | S & F ceiling rose, 3 phase/PVC/Polycarbonate, isolated body complete all as specified and as directed. |
| 120 | S & F call bell, ding dong AC 230 volts, single pole complete all as specified and as directed. |
| 121 | S & F bell push, flush type, 5 amp complete all as specified and ad directed. |
| 122 | M&L for fan regulator electronic type, single/double module, 5 stepped type 240 Watt, hum free flush type on the existing laminated sheet complete all as directed . |
| 123 | S&F sheet metal enclosures for DB’s double door suitable for mounting of MCB’s/Isolators, 240 Volt, SPN, 8 way with built in bus bar complete after taking down old unserviceable DB's and including making good the distrubed surface and matching with existing colour complete all as specified and as directed. |
| 124 | S&F VTPN distribution board with provision of MCCB as incommer, double door suitable for mounting MCB's/Isolators, 240 Volt,4 way with built in 100A rated bus bar and with out MCCB complete after taking down old unserviceable DB's and including making good the distrubed surface and matching with existing colour complete all as specified and as directed. |
| 125 | M&L for MCCB, 4P, 415V, overload adjustable 0.63 - 0.8-1 x in short circuit fixed 63 Amps breaking capacity 16KA complete all as specified and as directed. |
| 126 | M & L for MCB, SPN, 240 V, 40 to 63A Amps, and ‘C’ series breaking capacity 10 KA complete ISI marked , all as specified and as directed. |
| 127 | M & L for MCB, SP, 240V, 6 to 32 Amps and ' C ' series breaking capacity 10 KA ISI marked complete, all as specified and as directed. |
| 128 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. |
| 129 | S&F wall mounted LED 2 feet 10 Watt fittings with high diffuser , driver holder extruded aluminium heat sink provided for energy efficient heat dissipation &integrated electronic incl all accessories and lamp ,internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed . |
| 130 | Supply and fixing sub main wiring with two run of single core 4 Sqmm PVC insulated unsheathed stranded cable (FRLS) copper conductor drawn through PVC casing caping with all fittings including 4.0 sq mm PVC insulated unsheathed single core copper conductor as earth wire and including PVC casing caping and including PVC casing caping all as specified and as directed.Note : (i) Two run of single core cable 4 sq mm and one run earth wire 4.0 sq mm will be measured as one length |
| 131 | Supply and fixing sub main wiring with two run of single core 6 Sqmm PVC insulated unsheathed stranded cable (FRLS) copper conductor drawn through PVC casing caping with all fittings including 6.0 sq mm PVC insulated unsheathed single core copper conductor as earth wire and including PVC casing caping and including PVC casing caping all as specified and as directed.Note : (i) Two run of single core cable 6.0 sq mm and one run earth wire 6.0 sq mm will be measured as one length. |
| 132 | M&L for earthing complete with galvanised steel earth plate electrode 600x600x 6mm thick burried in ground (earth pit not less than 2.25 m deep below ground level0with top edge of the plate not less than 1.5 m below normal ground level, connected to earthing lead wire 4 mm dia as earthing by means of bolts, nuts, check nuts, and washers of GI or steel, GI strip protected by 40 mm bore medium grade GI pipe and other end connected to earth test point as directed including funnel with watering pipe 20 mm bore light grade GI, wire mesh charcoal or coke common salt laid in altrnative layer of 15 cm (complete thickness) all round the earth electrode, concrete earth pit in PCC(1:3:6) type C-1, 50 mm thick pre-cast RCC(1:2:4) type B-1 normally mix cover slab reinforced with in 8 mm dia TMT bar 10 cm C/C both ways and single handle of 10 mm dia round bar including necessary excavation, earth work etc. in soft/loose/hard soil and disposal of soil to a distance n.exc 50 m and necessry testing on completion all as shown in electrical plate No 3 MES schedule part-I complete all as specified and as directed. |
| 133 | Earth continuity conductor or main earthing lead fixed to wall or batten or recesss or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required 4 mm dia galvanised iron or steel wire |
| 134 | Supply and fix exhaust fan, plastic body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers including core cutting for mounting of exhaust fan with necessary electric connections complete all as specified and as directed . |
| 135 | S & F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings all complete and as directed |
| 136 | S & F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amp MCB, 240 V complete all as specified and as directed. |
| 137 | S&F sheet metal enclosures for DB’s double door suitable for mounting of MCB’s/Isolators, 240 Volt, SPN, 4 way with built in bus bar complete after taking down old unserviceable DB's and including making good the distrubed surface and matching with existing colour complete all as specified and as directed. |
| 138 | S&F sheet metal enclosures for DB’s double door suitable for mounting of MCB’s/Isolators, 240 Volt, SPN, 12 way with built in bus bar complete after taking down old unserviceable DB's and including making good the distrubed surface and matching with existing colour complete all as specified and as directed. |
| 139 | S & F of MCCB 100 A, 4P, 415V, 50 Hz with breaking capacity of 16KA complete all as specified and as directed. |
| 140 | S & F of MCB, SP, 240V, 6 to 32 Amps and ' C ' series breaking capacity 10 KA ISI marked complete, all as specified and as directed. |
| 141 | Supply and fixing LED luminaire 600 mm x 600 mm, 40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed . |
| 142 | Supply and fixing round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 143 | Supply and fixing circuit/ sub main wiring with two run of single core 10 Sqmm PVC insulated unsheathed stranded cable (FRLS) copper conductor drawn through PVC casing caping with all fittings including 10 sq mm PVC insulated unsheathed single core copper conductor as earth wire and including PVC casing caping and including PVC casing caping all as specified and as directed.Note : (i) Two run of single core cable 10 sq mm and one run earth wire 10 sq mm will be measured as one length |
| 144 | Supply and fixing in repair ceiling fan / exhaust fan condenser 2/2.5/3.15 Mfd complete all as directed. |
| 145 | M & L for core cutting into or through brickwork/masonary works/cement concrete wall (any description) / enlarging existing openings for mounting exhaust fans, etc and making good disturbed surfaces & removal of debris, complete all as specified and directed. |
| 146 | Supply and fixing in repair capacitor of exhaust fan 3/3.15 Mfd |
| 147 | S & F rechargeable emergency LED bulbs 15 W, 230 V AC, cool white colour with minimum 04 hours backup, automatic battery charging, overcharge & deep discharge protection alongwith 4 kV surge protection to endure power fluctuations incl. integral driver, complete all as specified and directed . |
| 148 | Schedule of Credit Please Enable Macros to View BoQ information |
