|
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil |
| 2 | Dumping stone including cost of stones in Horizontal on level |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources |
| 4 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size |
| 5 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand) |
| 6 | Dry random rubble masonry with hard stone in foundation and plinth: Without bond stone |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 8 | Providing and laying factory made Precast concrete solid blocks of 200 mm thickness of grade M10 made of C&D waste from approved manufacturer in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand |
| 9 | Providing & fixing upto floor five level precast sundried mudbricks in mud mortar using approved quality mud with carriage of material complete. |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts. |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms. |
| 14 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and ift upto 1.5m. |
| 15 | 25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with : Second class teak wood |
| 16 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 17 | Cement concrete flooring1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate) finished 40 mm thick with 20 mm nominal size stone aggregate |
| 18 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position withholdfast lugs or with dash fasteners of required dia &length(holdfast lugs or dash fastener shal lbe paidfor separately).Second class Kail wood |
| 19 | 20mm thick mud plaster using approved quality of earth. |
| 20 | Providing and fixing roundbeams (local Ballies), including hoisting, fixing inposition and applying wood preservative for the unexposed surfaces, etc.complete job; Average diameter 350 mm |
| 21 | Providing and fixing local talboos (Second order branch willow tree) includingproviding an ornamental look and fixing with nails complete job |
| 22 | Providing and laying 200mm thick mud pushka over talboos with 5mm thick drygrass (Yakzes/spoto/dry paddy straw etc), including ramming at OMC |
| 23 | Providing and applying white cement based putty of average thickness 1 mm ofapproved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 24 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats)over and including water thinnable priming coat with cement primer |
| 25 | Providing and fixing panelled or panelled and glazed shutters for doors, windowsand clerestory windows fixing with butt hinges of required size with necessaryscrews,excluding panelling which will be paid for separately, all complete as perdirection of Engineer-in-charge.(Note:-Butthingesandnecessaryscrewsshallbepaid separately) Second class kail wood 35 mm thick shutters |
| 26 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Float Glass Panes 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm). |
| 27 | Providing and fixing 4'' tongue and groove woood panelling for wall and ceiling etc with necessary screws polishing all complete job. |
| 28 | French spirit polishing :Two or more coats on new works including a coat of wood filler |
| 29 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 30 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 31 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thicknessto be specified by the manufacturer) of 1st quality conforming to IS : 15622 ofapproved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing wit h greycement slurry @ 3.3 kg/sqm including pointing the joints with white cementand matching pigment etc., complete. |
| 32 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red. |
| 33 | Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS :15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes, shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge (Note: Fittings to be paid separately). 18 mm thick |
| 34 | Providing and fixing traditionally carved wood work (Shingstak) over doors andwindows including all accessories as per the direction of the Engineer in-charge, complete with; 2nd class kail wood |
| 35 | Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. 150x10 mm |
| 36 | Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992 with necessary screws etc. complete : 125 mm |
| 37 | Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc. complete : 300x16 mm |
| 38 | Providing and fixing concealed hinge of approved quality for 19-20mm thick door with stainless steel screws complete : |
| 39 | Providing and fixing thermal insulation with Resin bonded rock wool conforming to IS: 8183, density 48 kg/m3, 50 mm thick, wrapped in 200 G virgin Polythenebags placed over existing false ceilng and held in position by criss-crossing Gl wire. |
| 40 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. 18. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 41 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make,including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer of approved makeCera,Somani,Hindware |
| 42 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink drain board 510x1040 mm bowl depth 250mm |
| 43 | Providing and fixing CP Brass telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia |
| 44 | Providing and fixing of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing . Rectangular shape 453x357 mm |
| 45 | Providing and fixing toilet paper holder. C.P. brass |
| 46 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)PN-16 pipe , 25mm OD(SDR-7.4) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe , 25mm OD(SDR-7.4) |
| 47 | PN-16 pipe , 32mm OD(SDR-7.4) |
| 48 | Providing and fixing C.P.brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15mm nominal bore. |
| 49 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fitting and the base support for tank (Sintex, Electroplast, Star, Lotus or equivalent having valid ISI license). |
| 50 | Providing and fixing CP jali trap of approved make |
| 51 | Providing and fixing material for insulation of pipe with nitrile tube, tapping with cello tape for inner wall fitting complete job incl. carriage 19mm thick , 50 mm dia (OD) (PPR 25mm) |
| 52 | Providing and fixing material for insulation of pipe with nitrile tube, tapping with cello tape ,Rock wool 6 inch each side , wire mesh ,polythene, tapping with cello tape aluminium sheet 26 gauge cladding with diameter complete job incl. carriage 19mm thick , 50 mm dia (OD) (PPR 32mm) |
| 53 | Providing and fixing material for insulation of water storage tank with nitrile tube, tapping with cello tape Rock wool 6 inch each side , wire mesh ,polythene, tapping with cello tape aluminium sheet 26 gauge cladding with diameter complete job. 19mm thick nitrile sheet. |
| 54 | Supplying and fixing C.I. cover for manholes: 455x610mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg. |
| 55 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm |
| 56 | 75 mm |
| 57 | Providing and fixing 15mm nominal bore CP brass angle valve for basin mixer and geyser point of approved make conforming to IS 8931 of make Cera,Somany,Hindware |
| 58 | Providing and fixing Towel rail C.P.brass 600x2mm together with a pair of C.P. brass brackets to fit the size of towel rail |
| 59 | Providing and fixing PPR Unions PPR Union 25mm |
| 60 | Providing and fixing PPR Unions PPR Union 32mm |
| 61 | Providing and fixing geyser of required capacity of approved make all complete as per direction of the Engineer in-charge. 20 Litres |
| 62 | Providing and fixing ball valve (PPR) of approved quality complete. 15 mm nominal bore |
| 63 | 20 mm nominal size |
| 64 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet: 100 mm diameter |
| 65 | Providing and fixing uplasticised PVC connection pipe with brass unions : 15 mm nominal bore |
| 66 | Providing and fixing PTMT soap Dish Holder having lengthof 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements weighing not less than 106 gms. |
| 67 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. |
| 68 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 69 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.a) 2 x 2.5 Sq.mm + 1 x 2.5 Sq.mm earth wire |
| 70 | b) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 71 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 72 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 73 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 6 Module (200mmX75mm) |
| 74 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excludinG modular plate etc. as required. A) 5/6 A switch |
| 75 | b)3 pin 5/6 A socket outlet |
| 76 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 77 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way (4 + 18), Double door |
| 78 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.a)Single pole 10 amp. |
| 79 | b)Single Pole 16 amp. |
| 80 | Supplying and laying of following sizes XLPE insulated PVC sheathed Aluminium conductor Un-armoured cable including necessary connection etc as required. 2 Core 16 sq.mm |
| 81 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 A |
| 82 | Supplying and fixing 240/415 V change over (MCBmodule) of on din rail of existing DBs/ enclosureand necessary connection.63 A |
| 83 | Supply and fixing LED type Down Lighter of following ratings 12 watt |
| 84 | Supplying and fixing of 120 watt LED Street Light complete with GI pipe bracket duly embeded along the parapet /wall. Wipro LR02-132-XXX-57-G2 or equivalent approved make |
| 85 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required. |
| 86 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 87 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
| 88 | Providing and fixing of following sizes of PVC conduit along with accessories in surface/recessed including cutting the wall and making good the same in case of recessed conduit as required. |
| 89 | Installation of Rooftof Solar Plant 3.5Kwh Please Enable Macros to View BoQ information |
