|
| 1 | Dismantling and Demolishing of existing structure |
| 2 | Dismantling of existing Aluminium roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of the site as and where directed by the E-I-C. |
| 3 | Dismantling existing steel work in roof truss, grills and allied members, including angles, tees, flats and channels, complete with all gusset plates, bolts, nuts, rivets, welding, cutting, etc., including dismantling of trusses, rafters, purlins and other structural members, and stacking the dismantled material within 50 metres lead, complete as per directions of Engineer-in-Charge. The rate shall include the cost of all labour, scaffolding, tools and plants, all leads and lifts, and all incidentals required to complete the work. |
| 4 | Demolishing of brick work in cement mortar i.e., the portion of half brick wall in the existing corridor by manually/ by mechanical means including stacking of serviceable material and disposal of debris within the periphery of the site as and where directed by the Engineer-in-charge. |
| 5 | Dismantling tile work in floors and walls laid in cement mortar including stacking material within 50 m lead for thickness of tiles 10mm to 25mm as and where directed by the E-I-C. |
| 6 | Demolishing cement concrete 1:3:6 or richer mix (including equivalent design mix) manually/ by mechanical means for existing kerb including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 7 | Dismantling of 60mm thick factory made cement concrete interlocking paver block of M-30 grade in the existing parking area including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as and where directed by the Engineer-in-charge. |
| 8 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 9 | Construction of new office area |
| 10 | Earth work in excavation by mechanical means/manual means for foundation and footing for the office extension including disposal of excavated earth lead upto 50m and for all lift and ramming of bottom, as and where directed by Engineer-in-charge. |
| 11 | Construction of granular sub-base by providing close graded material conforming to Grade-1 (size range 75mm to 0.075mm) having CBR value 30, mixing in a mechanical mix plant at OMC, carriage of mixed maerial by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density,complete as per specifications and directions of Engineer-in-Charge. |
| 12 | Providing and laying in position cement concrete (PCC) of 1:3:6 for foundation base and footing base of the office extension including cost of all materials, labour charges, etc. completed as per the direction of Engineer-in-Charge |
| 13 | Providing and laying in position reinforced cement concrete of 1:1.5:3 for foundation beam and footing including cost of all materials, labour charges and excluding the cost of centering, shuttering, reinforcement, etc. completed as per the direction of Engineer-in-Charge |
| 14 | Supplying and applying bituminous solution primer (2 coats) on foundation beam surface at 0.24 litre per sqm. As per the direction of Engineer-in-charge. |
| 15 | Providing and laying Autoclaved Aerated concrete (AAC) blocks masonry with 150mm to 300mm thick with Grade-1 AAC blocks of density 551 to 650 kg/cum conforming to IS:2185 (Part 3) in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. |
| 16 | Reinforced cement concrete work in CC 1:1.5:3 for lintel, sunshade & intermediate belt (sill level) excluding the cost of centering, shuttering, finishing and reinforcement and including cost of all materials, labour charges, etc. completed as per the direction of Engineer-in-charge. |
| 17 | Steel reinforcement for R.C.C work for foundation beam, lintel, sunshade & intermediate belt (sill level) etc. with TMT bars of for grade Fe-500D or more for the proposed office extension including straightening, bending, cutting, placing in position etc., complete as per the directions of E-I-C. |
| 18 | Formwork for RCC structures such as centering and shuttering for foundation beam, sunshade & lintel etc. including strutting, propping and removal of formwork etc. complete |
| 19 | Plastering in CM 1:4, 12 mm thick on brick masonry including cost of materials, labour, finishing, curing etc. complete. 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) |
| 20 | Roofing |
| 21 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 22 | Providing & fixing of 0.71mm Aluminium colour coated troughed profile roofing sheet with center to center pitch of 200mm, depth of 32mm, overall profile width 1092 mm, cover width 1000mm at all heights, levels and locations colour finsih Aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling/tapping stainless steel screws M6, 50 mm long with 3mm EPDM seal washer etc, all inlcusive of labour, scaffolding, T&P and sundries etc. complete as per direction of the Engineer-in-charge. |
| 23 | Providing and fixing PVC board false ceiling of approved quality and thickness, including GI framework suspended from RCC roof slab and steel truss members below aluminium sheet roofing with GI hangers/suspenders/clamps, including perimeter angle fixed to walls, complete with all necessary fittings, screws, fasteners, cutting, leveling, alignment and finishing, complete as per the directions of Engineer-in-Charge. The rate shall include the cost of all materials, GI framework, accessories, transportation, loading and unloading, labour, scaffolding, tools and plants, all leads and lifts. |
| 24 | Providing and fixing pre-coated galvanized steel sheet / PVC rainwater gutter along eaves of the roof, including necessary end caps, angles, outlets, elbows, self-drilling/self-tapping screws, EPDM washers, and connection to downpipes, complete as per the direction of Engineer-in-charge, fixed to roof purlins / truss members. Measurement in linear metre. The rate shall includes cost of labour, material cost, hiring charges, etc. |
| 25 | Flooring works |
| 26 | Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete fo all lift. |
| 27 | Providing and laying of cement concrete of PCC 1:2:4 for flooring above earth filled area at 10 cm thick including cost of all materials, labour charges for laying in a proper level etc. complete. |
| 28 | Providing and laying vitrified floor tiles of size 600 x 600 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey slurry @ 3.3 kg/ sqm inlcuding grouting the joints with white cement and matching pigments etc., complete. The rate shall include cost of all materials, transportation, loading / unloading, labour charges etc. complete. |
| 29 | Doors & Windows |
| 30 | Providing second class teak wood work in frames of doors and windows fixed in position with hold fast lugs or with dash fasteners of required dia & length, etcc., complete as and where directed by the E-I-C. |
| 31 | Providing and fixing panelled or panelled and glazed 30 mm thick shutters of second class teak wood for doors and windows, fixing with butt hinges of required size with necessary screw, excluding panelling all complete as per direction of E-I-C. |
| 32 | Providing and fixing glazed shutters for windows using 4 mm thick float glass panes (weight not less than 10 kg per sqm) with ISI marked M.S. pressed butt hindes bright finished of required size with necessary screws. |
| 33 | Providing and fixing M.S. grills fixed to wooden frames with raw plugs screws of required pattern in frames of window etc., with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. |
| 34 | Providing and fixing holdfast lugs and dash fasteners of approved make of required diameter and length for fixing door and window frames, including drilling holes, embedding in cement concrete/masonry, cutting chases and making good the same. Providing and fixing stainless steel butt hinges of required size with necessary stainless steel screws and ISI marked mild steel pressed butt hinges, bright finished, of required size with necessary screws for fixing shutters/panels of doors and windows. Providing and fixing all other required accessories including rawl plugs screws, tower bolts, locks for door and frame, automatic door closers and similar fittings, complete as per direction of Engineer-in-Charge. |
| 35 | Finishing works |
| 36 | Providing and applying 2 coat white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 37 | Applying priming coats on newly constructed portion of wall with primer of approved brand and manufacture, with water thinnable cement primer on wall surface having VOC content less than 50 grams/litre |
| 38 | Painting with Exterior Emulsion (Weather coat) paint of approved brand and manufacture of required colour to give an even shade on new work (exterior brick wall for shutter closing) two or more coats including cost of materials, transportation, brush / roller, labour charges etc. complete. |
| 39 | Interior wall painting with emulsion paint of approved brand and manufacture of required colour to give an even shade for brick wall for shutter closing interior, two or more coats including cost of materials, transportation, brush / roller, labour charges etc. complete. Two or more coat applied @ 1.43 lits / 10 sqm. |
| 40 | Finishing with PU/Epoxy paint (two or more coats) at all locations on truss roof steel work and applied as per manufacturers specifications including appropriate priming coat, preparation of suface, etc. complete. The rate shall include labour, brush / roller, scaffolding charges, etc., complete as per direction of E-I-C. |
| 41 | Polishing in high gloss/matt finish clear polish on wood work in required color/wooden shade texture with following process:1. The surface to be polished is rubbed with sand paper 80/120 no. & then with sand paper of 160/180 nos.2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat & 2nd coat is allowed to dry for 8 to 12 hrs.3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.4. On this, 1st coat of polish is applied with spray gun using clear polish & thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final polish is applied with compressor pressure spray gun using clear polish & thinner mixed in required proportion complete as per direction of E-I-C. |
| 42 | Painting with synthetic enamel paint for M.S. grills of window of approved brand and manufacture of required colour to given an even shade with Two or more coats on new work over an under coat of suitableshade with ordinary paint of approved brand and manufacture etc., complete. The rate shall include labour, brush / roller, charges, etc., complete as per direction of E-I-C. |
| 43 | Electrical work |
| 44 | Providing and fixing of new electrical points to the proposed office extension area including supply of necessary lighting arrangements such as (i) LED bulbs (ii) Tube lights, (iii) Ceiling fans, (iii) Switches, (iv) Switch boards, (v) Suitable capacity power plugs (vi) Distribution boards etc. as per the directions of EIC. The rate shall include cost of all materials, supply to the site, fixing in position, connecting to existing lines with the help of an expert electrician etc. complete |
| 45 | Supplying and laying of suitable capacity electric cables/wires for providing new electric points to the proposed office extension area as per requirement and the same shall be concealed by inserting suitable conduits etc. with the help of an expert electrician as directed by E-I-C. |
| 46 | Miscellaneous works |
| 47 | Dismantling, shifting and refixing of existing air-conditioning unit at a new location as directed by the Engineer-in-Charge, including necessary dismantling, transportation within premises, refixing, reconnection of refrigerant piping, electrical wiring, drain connection, testing and commissioning, complete as per direction of Engineer-in-Charge. |
| 48 | Providing suitable internet lines/cables on the new walls of proposed office extension to be constructed with all fixtures like conduites / bends elbows etc as and where directed by the E-I-C by providing new conduits / fittings, connections, switches etc as per requirement, by making holes in existing truss/partition/wall without damaging any other structures etc. Complete. |
| 49 | Providing, installing, testing and commissioning of new air-conditioning unit of approved make and capacity, including all standard accessories, refrigerant piping up to required length, electrical wiring from nearest power point, drain piping, mounting arrangement, insulation, and all other works necessary for proper operation, complete as per specifications and direction of Engineer-in-Charge. |
| 50 | Providing and laying bitumen self-adhesive sheet of appropriate thickness (specify thickness in mm) on the roof surface to prevent rainwater ingress. The sheet shall be applied to a clean, dry, and primed surface. The edges of the sheet shall be properly lapped and sealed to ensure a complete waterproof barrier. The gaps, joints, and seams between the sheets shall be covered with high polymer butyl rubber waterproof tape & white silicon weather coatof approved quality as and where directed by the E-I-C. |
| 51 | Lump-sum provision for minor repair works to existing building, including cutting and removal of small trees, bushes and shrubs, clearing of site, making good disturbed surfaces, and all incidental works required for smooth execution of the work, complete as per direction of Engineer-in-Charge. Please Enable Macros to View BoQ information |
