|
| 1 | Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area not exc.1.5 sqm each including separating guard bars/grills/wire mesh etc., complete all as specified and as directed. |
| 2 | Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exc.1.5 sqm but not exc 4sqm each including separating guard bars/grills/wire mesh etc., all as specified and as directed by the Engineer-in-Charge. |
| 3 | Taking down shutters of any description exc. 1sqm but not exc. 2 sqm and complete all as specified and as directed. |
| 4 | Taking down door shutters of any description exc. 1sqm but not exc. 2 sqm and refixing in the same opening after laying floor tiles and making necessary alterations to the size of shutters to suit with the door opening to the required height complete all as specified and as directed. |
| 5 | M&L for Second class Hard wood,plain solid straight chowkats and frames rebated on the solid, rounded or chamfered put together with glue pinned at joints, supplied and fitted complete all as specified and as directed. |
| 6 | S&F Solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge metred cut at two corners and joined by inserting two Nos of 150mm long brackets of 15mm x 15mm MS square tube inside the 19mm x 19mm square tube fixed to wall in repairs by drilling 100mm long MS screws using PVC fastener complete all as specified and as directed. |
| 7 | M&L for 35mm thick 2nd class hard wood Glazed and skeleton window shutters open rebated and prepared to receive glass, but divided into squares, gauze, etc. with sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a); supplied and fitted to chowkats complete all as specified and as directed. |
| 8 | S&F Factory made solid PVC moulded door shutter with particle board core 28 to 30mm thick with 2,4,6 raised panel design with 2mm thick moulded Prelam PVC sheet on the front face & 2mm prelam PVC sheet on back face, supplying and fixing in frame at site as per drawing complete all as specified and as directed. |
| 9 | M & L 40 mm thick flush door shutter, solid core construction , with block board core and plywood face panels, commercial type on both side etc. complete all as specified and as directed. |
| 10 | S&F powder coated Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified (Thickness of powder coating not less than 50 micron) |
| 11 | S&F aluminium powder coated sliding window using three track alumimium section weighing not less than 0.900Kg per RM for frame and 0.48 Kg per RM for sliding shutters including fixed with sash bars aluminium anodised snap beads, screws and fixed alongwith same section in three sliding shutters two for fully glazed with 4 mm thick tinted glass fixed with glazing clips, and one for wiremesh shutterswith stain less stell wire cloth etc (The rate is inclusive of all fixings of builders hard ware such as wirmesh hinges, handles, locking arrangements etc complete all as specified and directed |
| 12 | S&F Anodised aluminium grill (anodised transparent of dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with CP brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed |
| 13 | S&F 4.0mm thick, figured glass pin head type & glazing with oil putty in square n exc 0.5 sq.m in each pane from Aluminium section fixed with beads/glazing clips complete all as specified and as directed. |
| 14 | S&F Aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed with aluminium wire staples fixed to wood/steel frames complete all as specified and as directed. |
| 15 | M&L MS work in bands, straps, supports of stays, hook and pintle hinges, clamps, hold fasts, guardbars, grills bolts etc and similar conforming to Fe-290 Gde -E -165 complete all as specified and as directed. |
| 16 | M&L for preparing wood and wood based materials, steel and iron work , new or old and treating ends of posts, backs of chowkats, etc., area tarred exc 0.1 sqm but n.exc 0.5 sqm each and treated with tar or coal tar black paint complete all as specified and directed. |
| 17 | M&L treating small articles such as hold fast etc with tar or coal tar black paint area tarred n.exc 0.1sqm each complete all as specified and as directed. |
| 18 | S&F Butt hinges, 100mm size medium weight stainless steel Etc., complete all as specified and as directed. |
| 19 | S&F Aluminium anodised barrel tower bolts of extruded section 150mm long all as specified complete all as specified and as directed. |
| 20 | S&F aluminium anodised barrel tower bolts, extruded section of size 200mm long all as specified complete all as specified and as directed. |
| 21 | S&F extruded aluminium alloy handles fabricated type anodised 150 mm size complete all as specified and as directed. |
| 22 | S& F aluminium alloy, anodised sliding door bolts 300mm long with hasp and stable (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and as directed. |
| 23 | S & F mild steel 300 mm , ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 24 | S&F Hasp & staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate with screws 150mm size complete all as specified and as directed. |
| 25 | Demolition of brick masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work including removal of rubbish outside defence land complete all as specified and as directed. |
| 26 | M&L Brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed. |
| 27 | M&L Brickwork with fly ash old size bricks, straight or curved in any radius in half brick thick walls built in CM (1:4) complete all as specified and as directed. |
| 28 | M & L for demolition of cement concrete in ground floors and paving n.exc 15cm thickness (below or above ground level) including removal of rubbish outside defence land complete all as specified and as directed. |
| 29 | M&L 75mm thick PCC type C1, (1:3:6) using 20mm graded stone aggregate as in plinth protection and finished the surface even and smooth without using extra cement complete all as specified and as directed. |
| 30 | Roughening surfaces of old concrete floor or concrete surfaces by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and as directed. |
| 31 | M &L Non -skid coloured ceramic tiles 7 mm to 8 mm (Square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 32 | Ditto above for work on vertical surfaces such as skirting, dados and risers to step etc. over 10mm thick rendering in CM 1:4 for laying on walls complete all as specified and as directed. |
| 33 | Dismantling, floor, hearth or wall tiling including CM (bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and as directed. |
| 34 | S&F Coloured Glazed ceramic tiles in vertical surfaces 350x250mmx7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick backing coat in CM 1:4 on fair face of brick or concrete surface complete all as specified and as directed. |
| 35 | M &L Non -skid coloured ceramic tiles 7 mm to 8 mm (Square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:4 complete all as specified and as directed. |
| 36 | Supply & Laying of CPVC Pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceilings or laying in floors complete all pipe fittings and including taking up or down in the existing pipe line any type and any size completely all as specified for following pipes :-(a) 20mm outer dia bore |
| 37 | Supply & Laying of CPVC Pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceilings or laying in floors complete all pipe fittings and including taking up or down in the existing pipe line any type and any size completely all as specified for following pipes :-(a) 25mm outer dia bore |
| 38 | Supply & Laying of CPVC Pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceilings or laying in floors complete all pipe fittings and including taking up or down in the existing pipe line any type and any size completely all as specified for following pipes :-(a) 32mm outer dia bore |
| 39 | S&F Rotational moulded polyethylene water tank (cylindrical vertical closed top) hoisted and fixed in position capacity of tank 500 ltrs including dismantling of existing tank of any description and S&F 25 mm ball PTMT Ball valve high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed. |
| 40 | S&F 15mm dia bib taps, chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule fixed in repairs complete all as specified and as directed. |
| 41 | Supply and Fix in repairs health faucet (Hand shower) with 1metre flexible tube with wall hook, Chromium Plated of make that shall match with existing fitting i.e., Cat No. BEA-97 of Prayag complete all as specified and as directed. |
| 42 | S&F in repairs for two way bib tap 15 mm bore chromium plated with crutch or butterfly handle, fancy type with long shank screwed down both ends for pipes or for union of make Prayag all as specified and directed. |
| 43 | S&F in repairs 15mm dia pillar taps cast fancy type copper alloy with capstan heads chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and as directed. |
| 44 | S&F in repairs 15mm dia Brass stop valves chromium plated, fancy type with long shank and cup concealed type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and as directed. |
| 45 | S&F in repairs 15mm dia concealed Brass angle stop valves chromium plated, fancy type with long shank and cup concealed type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union of make that shall match with existing fitting i.e., Cat No. 6510 of Prayag complete all as specified and as directed. |
| 46 | S&F in repairs 15mm PVC connection 450mm long of superior quality complete all as specified and as directed. |
| 47 | S&F in repair Chromium plated brass shower rose 125 mm including fixing to steel pipe or union complete all as specified and as directed. |
| 48 | S & F in repairs Vitreous china wash down water closet (pedestal pattern ) white (ETWC) and fixed including Plastic seat cover, closed patttern with flat bottom, and cover and Mild steel chromium plated hinging device complete all as specified |
| 49 | S&F in repairs PVC low level flushing cistern 10 ltrs capacity with complete accessories, PVC flush pipe, PVC over flow pipe etc., and connected to water closet as per manufacturers instruction of make prayag and as directed by the Engineer-in-Charge |
| 50 | S&F in repairs vitreous china wash basin white flat back size 550x400mm including cutting for and pinning in ends of brackets or erecting stand but excluding taps, wastes chain and plug and porcelain stopper but including brackets and 32mm waste coupling and waste pipe complete all as specified and as directed. |
| 51 | Supply and Fix looking mirror 600mm x 450mm bevelled edge on selected quality mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cub washers and framed with aluminium channel all round etc., complete fixed in repair complete all as specified and as directed. |
| 52 | S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard and railing 60cm long complete all as specified and as directed. |
| 53 | S&F sink with draining board made of stainless steel 1mm thick kitchen or laboratory with plugs washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including waste pipe in repairs complete all as specified and directed. |
| 54 | S&F in repair 20mm dia Tubular towel rail 600mm long between flanges 'D' type brass chromium plated, fixed to wall with brass screws and wooden/plastic cleats complete all as specified and directed. |
| 55 | S&F Shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 300gm) including taking down old one complete all as specified and directed. |
| 56 | S & F PVC (SWR) pipes 110mm single socketed, in any length with rubber ring joints fixed to walls etc complete including dismantling existing pipes along with fittings all as specified and directed. |
| 57 | S & F PVC (SWR) pipes 110mm single socketed, in any length with rubber ring joints laid in trenches or in floor complete including dismantling existing pipes along with fittings all as specified and directed. |
| 58 | S & F PVC (SWR) bends 110 mm bore any radius with oval access door complete all as specified and directed. |
| 59 | S&F PVC (SWR) branch Single (single Y) equal or unequal for 110 mm bore pipe with oval access door complete all as specified and as directed. |
| 60 | S & F (SWR) vent cowl suitable for 110 mm bore pipe complete all as specified and as directed. |
| 61 | M&L for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 62 | M&L PCC 1:2:4, Type B1 (using 20 mm graded stone aggregate), 25 mm thick, as in sub base complete all as specified and directed |
| 63 | Demolition of reinforced cement concrete in roofs, floors (other than ground floors) beams staircases landing chajjas and similar suspended work and disposal off outside defence lands complete all as specified and as directed. |
| 64 | Demolition of reinforced cement concrete in roofs, floors (other than ground floors) beams staircases landing chajjas and similar suspended work and disposal off outside defence lands complete all as specified and as directed. |
| 65 | Demolition of reinforced cement concrete in any description and in any position not otherwise specifically provided for and disposal off outside defence lands complete all as specified and as directed. |
| 66 | M & L for reinforced cement concrete M-30(Design mix ) using 20mm graded aggregate in slabs supported on walls beams and columns in floors roofs, landings, balconies canopies deck slabs and in shelves and the like complete all as specified and as directed.Note : Reinforcement will be measured and paid separately |
| 67 | M & L for reinforced cement concrete M-30(Design mix ) using 20mm graded aggregate in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.Note : Reinforcement will be measured and paid separately |
| 68 | M&L for form work to sides and soffits of floor or roof beams, beam haunching, girders, bressummers lintels etc rough finished surfaces of concrete complete all as specified and as directed.. |
| 69 | M &L form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or Sloping) complete all as specified and as directed. |
| 70 | Formwork to edges of concrete flats, breaks in floors, window cills, concrete railings, openings in concrete walls floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc10cm but n exc 20cm wide complete all as specified and as directed. |
| 71 | M & L for precast cement concrete in man hole cover slab, chullah hoods, chajjas, platforms etc using type B1 concrete mix 1:2:4 with 20 mm graded aggregate and set in cement mortar 1:4 Note : Reinforcement will be measured and paid seperately |
| 72 | M&L for TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending and binding with MS wire annealed not less than 0.90mm dia or securing with clips complete all as specified and as directed. |
| 73 | All as per ItemNo. 72 above but 5 mm dia and over upto and including 10mm dia in stirrups, spacers and binders quality conforming to Fe-410 complete all as specified and as directed. |
| 74 | M&L for applying two coats of synthetic enamel paint on new steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide complete all as specified and as directed. |
| 75 | Taking down cement plaster or cement lime plaster on brick or stone wall etc including racking out joints hacking for keys scrubbing down with water etc complete all as specified and as directed. |
| 76 | M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces of walls etc 10 mm thick im CM 1:6 and 5 mm thick in CM 1:4 mixed with water proofing compound as per manufacturers instruction & finished the surfaces even and smooth without using extra cement, complete all as specified and directed. note : WPC WILL BE MEASURED AND PAID SEPERATELY |
| 77 | Supply only Liquid water proofing compoud |
| 78 | M & L for 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 79 | M&L for rendering 5mm thick in CM 1:3 on ceiling area on fair surfaces of concrete surfaces finished even and smooth complete all as specified and directed. |
| 80 | Material and labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces complete including preparation of newly plastered surfaces of walls all as specified and as directed. Make : APEX of Asian or equivalent of Shalimar / Nerolac/ Berger. |
| 81 | Material and labour for complete removal of existing treatment and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces complete including preparation of newly plastered surfaces of walls all as specified and as directed. Make : APEX of Asian or equivalent of Shalimar / Nerolac/ Berger. |
| 82 | M & L for preparing old surfaces of ceiling and applying two coats of white wash complete all as specified and directed. |
| 83 | M & L for preparing new surfaces of ceilings and applying three coats of white wash complete all as specified and directed. |
| 84 | M & L for complete removal of existing treatment on wall surfaces and washing, rubbing down and applying two coats of oil bound distemper over a coat of alkali resistant primer and 1 to 1.5 mm thick wall care putty on old surfaces of wall complete all as specified and as directed. |
| 85 | M & L for preparation of new wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer and 1mm thick plaster of paris complete all as specified and directed. |
| 86 | M&L for applying two coat of Synthetic enamel paint over a coat of pink primer for wooden surfaces including necessary preparation of new wooden surfaces of any description exc. 10cm width or girth complete all as specified and as directed. |
| 87 | M & L for applying one coat of synthetic enamelled paint including preparation of old treated wood surfaces of any description not otherwise described over 10 Cm girth or width all as specified and as directed. |
| 88 | S&F continuous (piano)hinges mild steel, bright finish or electro galvanised width of flaps (when open)in mm 30mm as fixed in repairs complete all as specified and as directed. |
| 89 | S&F in repairs 20mm dia mild steel CP curtain rod with brackets, stops rollers etc complete all as specified and as directed. |
| 90 | Cleaning the reinforcement bars of any dia in any RCC members by scrapping and removing rust completely by using suitable rust remover liquid( Shali Prime RC of STP Ltd or equivalent) and applying epoxy based anti corrosive paint (Shali Prime Zn R of STP Ltd) or equivalent as per manufacturers instruction complete including provn of ms mesh 25 mm X 25 mm and 3 mm dia of wire of mesh and Rendering 10mm thick over concrete surfaces in cement mortar 1:3 mixed with epoxy based bonding agents (Shali mortar M of STP Ltd or equivalent) in the proportion recommended by the manufacturers upto a height of 10.00 m from the Ground level including necessary scaffolding if required all as specified and as directed. Note: The cost factor towards scaffolding etc for carrying out these items of work at various heights shall deemed to be included in this item. |
| 91 | M&L for Prelaminated particle board 18/19 mm thick exterior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws as in cupboard shutter and shelves etc fixed in repairs including Ist class hard wood bedding all around the shutter and paints with synthetic enamel paint to beading complete all as specified and as directed. |
| 92 | M&L Granite (of any type) slab 20mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and moulding the edge, hole for gas pipe and polishing complete as in cooking platform including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:4 complete all as specified and as directed. |
| 93 | Demolition of highly deteriorated portion of RCC beams, pillars,chajjas and lintels etc applying epoxy based bonding agent Shali SBR Latex of STP Ltd or equivalent to the surface of old concreate surfaces as per manufacturers recommendation, recasting RCC members with cement concrete type A0 1: 1.5 : 3 using 12.5mm graded stone aggregate mixed with plasticzer admixture powder STP NO 1 of STP Ltd or equivalent @ 1 kg per 50 kg of cement or the proportion recommended by the manufacturers including all necessary formwork all as directed at site. Note : grouting the cracks cleaning the existing reinforcement with rust remover application of anti corrosive paint and replacement of reinforcement where necessary before recasting RCC reinforcement shall be measured and paid separately. However the cost factor towards scaffoldging etc for carryingout these items of work up to 10 Mtr heights shall deemed to be included in this item. |
| 94 | M&L for Preparing the new surface thoroughly by cleaning of roof slab till the mother slab is exposed and washing down with clean water to remove all dirt etc. The slab should be recoated with slurry of Dr. Fixit Pidicrete URP or its techno commercial equivalent in BASF/FOSROC/CICO/MC-BAUCHMIE/STP and cement in 1:1 proportion. After drying, dilute 2 parts of Dr. Fixit Primeseal or its techno commercial equivalent in BASF/FOSROC/CICO/MC-BAUCHMIE/STP with 1 one part of water. This dilution shall cover 7 to 8 sq.mt. Allow it to dry for6 to 8 hrs.Apply the first coat of Dr. Fixit Newcoat or its techno commercial equivalent in BASF/FOSROC/CICO/MC-BAUCHMIE/STP without any dilution at the rate of 2 sq mt per litre and allow it to dry before taking up the second and third coats, the rate of application being the same. and open woven glass fibre mesh of 2.5 mm x 2.5 mm must be sandwiched between the first and second coat. While the 1st coat is still wet, place the fibre mesh on it. After the coat dries, start applying the 2nd coat of Dr. Fixit Newcoat or its techno commercial equivalent in BASF/FOSROC/CICO/MC-BAUCHMIE/STP . |
| 95 | S&F Ball catches with 8mm dia steel ball and brass body and skirting plate including letting in and fixed overall length of cover plate 150mm complete all as specified and as directed. |
| 96 | S&F extruded Aluminium alloy handles fabricated type anodised 75 mm size complete all as specified and directed. |
| 97 | M&L Machine cut kota stone slab flooring 20-25mm thick over 15mm thick screed in CM(1:6) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and as directed. |
| 98 | M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado & pillar over 15mm thick plater in CM (1:3) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and as directed. |
| 99 | S & F Stainless steel plate rack of size 24X36X10 inch fixed on wall with stainless screw with wooden plugs near the kitchen sink including all accessories and making good the disturbed wall tiles/concrete surface all as specified and directed. |
| 100 | S & F PVC (SWR) Junction (Single T) 75 mm bore with oval access door complete all as specified and directed. |
| 101 | S & F PVC (SWR) pipes 150mm single socketed, in any length with rubber ring joints laid in trenches or in floor complete including dismantling existing pipes along with fittings all as specified and directed. |
| 102 | M & L for Cutting holes into or through brick walls built in cement mortar and making good in PCC (1:2:4) type B-1 as required Superficial area not exc 150 Sq CM complete all as specified and as directed. |
| 103 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 104 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 105 | S&F for framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 106 | S&F pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 107 | S & F PVC (SWR) bends 75 mm bore any radius with oval access door complete all as specified and directed. |
| 108 | M&L for point wiring of size 1.5 sqmm with PVC insulated unsheathed multistranded copper conductor cable of 1100V grade drawn through new non metallic rigid PVC conduit including accessories, concealed in wall/floor and fixed on ceiling/roof etc, including pressed steel terminal boxes concealed in walls for housing modular switchs,sockets, fan regulators etc., incl provn of 1.5 sqmm PVC insulated copper earth conductor cable for earth continuity and connecting to common earth dolly including taking down carefully copper/aluminium point wiring light, fan, socket or power complete with fittings such as switches, ceiling roses, regulators sockets etc and making good disturbed surfaces of walls, floors to match with the existing surface complete all as specified and as directed for :- (a) one light point controlled by one switch |
| 109 | (b) one fan point controlled by one switch |
| 110 | ( c) one 3 pin socket outlet 5 amps on the same board controlled by one switch. |
| 111 | (d) one 3 pin socket outlet 5 amps on independent board controlled by one switch. |
| 112 | (e) one bell/buzzer point controlled by one bell push |
| 113 | As per above item No.108 for one socket outlet three pin 15 amps control by one switch independent board with cable 2.5 sqmm size complete all as specified and directed. |
| 114 | M&L for point wiring of size 1.5 sqmm (two run) with PVC insulated unsheathed multistranded copper conductor cable of 1100V grade drawn through non metallic rigid Existing PVC conduit , in wall/floor and fixed on ceiling/roof etc, including pressed steel terminal boxes concealed in walls for housing modular switches,sockets, fan regulators etc., including provn of 1.5 sqmm PVC insulated copper earth conductor cable for earth continuity and connecting to common earth dolly complete for :- (a) one light point controlled by one switch |
| 115 | (b) one fan point controlled by one switch |
| 116 | ( c) one 3 pin socket outlet 5 amps on the same board controlled by one switch. |
| 117 | (d) one 3 pin socket outlet 5 amps on independent board controlled by one switch. |
| 118 | As per above item No.110 for one socket outlet three pin 15 amps control by one switch independent board with cable 2.5 sqmm size complete all as specified and directed. |
| 119 | S& F for modular cover plate with frame 3 module complete all as specified and directed. |
| 120 | S& F for modular cover plate with frame 4 module complete all as specified and directed. |
| 121 | S& F for modular cover plate with frame 6 module complete all as specified and directed. |
| 122 | S&F modular switches suitable for type AC 240V, 6 amps 1 module complete all as specified and directed. |
| 123 | S&F modular sockets suitable for type AC 240V, 6 amps 2 module complete all as specified and directed. |
| 124 | S&F modular switches suitable for type AC 240V, 16 amps 1 module complete all as specified and directed. |
| 125 | S&F modular power sockets suitable for type AC 240V, 16 amps 2 module complete all as specified and directed. |
| 126 | S&F modular fan regulator suitable for type AC 240V, 2 module complete all as specified and directed. |
| 127 | S&F modular bell switch suitable for type AC 240V, 16 amps 1 module complete all as specified and directed by Engr-in-Charge |
| 128 | S&F call bell of multi music type A/C 230 volts complete all as specified and directed. |
| 129 | S&F ceiling rose , polycarbonate, isolated body with 2 to 3 terminals complete all as specified and directed. |
| 130 | S& F ceiling fan 230v,1200 mm sweep, five star rating with brushless conductor motor complete with blades, down rods, electronic regulator and accessories complete including taking down ceiling fan and removing blades and fan body and depositing in store including connecting rod, cotter pins and all accessories completeall as specified and as directed. |
| 131 | Supply and fix exhaust fan, steel body AC Single phase230V of size 300mm sweep with blades and frames louvers complete and old fan deposit to E/M store complete all as specified and directed. |
| 132 | S&F lamp holder insulated body with back plate for batten fittings/angle holder complete all as specified and as directed |
| 133 | S&F of LED bulb 9 w high suitable for lamp holder including taking down carefully unserviceable fittings and making good disturbed surfaces of walls, floors to match with the existing surface complete all as specified and as directed. Make : Havells Cat No. LED PLUS 9W B22 CDL 2STAR LAMP or techno commercial equivalent in Philips /Bajaj |
| 134 | S & F 20 Watts LED COOL LIGHT fitting, surface mounting general purpose LED Battens in Extruded Aluminum housing with wide range of wattages to suite variety of application areas, complete including taking down all as specified and directed by the Engr-in-Charge. Make : Havells Cat No. LUMILINEPLUSNEOBS20WLED865SPCSSIND or techno commercial equivalent Philips/Bajaj. |
| 135 | S & F 10 Watts LED COOL LIGHT fitting, surface mounting general purpose LED Battens in Extruded Aluminum housing with wide range of wattages to suite variety of application areas, complete including taking down all as specified and directed by the Engr-in-Charge. Make : Havells Cat No. LUMILINEPLUSBS10WLED865SPCSSIND or techno commercial equivalent Philips/Bajaj. |
| 136 | S & F 10 Watts COOL LIGHT environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon bulk head back-lit LED luminaries comprising of high brightness LEDs, incl taking down unserviceable fittings of any size and capacity complete and making good disturbed surfaces of walls, floors to match with the existing surface complete all as specified and as directed. Make Havells Cat No. HEXAFT10WLED857SSYMBOPC or techno commercial equivalent in Philips /Bajaj. |
| 137 | S & F 15 Watts round ceiling COOL LIGHT, functional range of aesthetically designed surface mounted downlights with Aluminum housing and heat sink for better thermal performances complete including taking down all as specified and directed by the Engr-in-Charge. Make Havells Cat No. INTEGRANXTRDDLRSURD15WLED865S or techno commercial equivalent in Philips /Bajaj. |
| 138 | S&F sub main wiring complete with two runs of 4 sqmm PVC insulated unsheathed single core multistrand copper conductor cable of 1100 volts grade drawn through new non metallic rigid PVC conduit pipe concealed in wall along with accessories fixed on walls/floors/ceiling with one run of 4 sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor including taking down old sub main wiring after proper disconnection of electric supply and making good disturbed surface to match with the existing surface complete all as specified and as directed. Note:- Two runs of PVC insulated cable 4 sqmm + one run 4 sqmm of earth wire and one run of conduit including accessories shall be measured as one length. |
| 139 | S&F sub main wiring complete with two runs of 6 sqmm PVC insulated unsheathed single core multistrand copper conductor cable of 1100 volts grade drawn through new non metallic rigid PVC conduit pipe concealed in wall alongwith accessories fixed on walls/floors/ceiling with one run of 6 sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor including taking down all as specified and directed by Engr-in-Charge. Note:- two runs of PVC insulated cable 6 sqmm + one run 6 sqmm of earth wire and one run of conduit including accessories shall be measured as one length. |
| 140 | S&F MCB distribution board made of CRCA sheet, powder coated paint conforming of IS 13032, double door fixed in switch boards/wall at various places of capacity 415 volts 6 way MCB DB, TPN with 200 Amp rated bus bar shall conform to IP 38 protection including taking down complete after taking proper disconnecting of electric supply properly and making good surface complete all as specified and directed. |
| 141 | S&F MCB distribution board made of CRCA sheet, powder coated paint comforming of IS 13032, double door fixed in switch boards/wall at various places of capacity 240 volts 12 way MCB DB, SPN with 200 Amp rated bus bar shall conform to IP 38 protection including taking down complete after taking proper disconnecting of electric supply properly and making good surface complete all as specified and directed. |
| 142 | S&F MCCB adjustable thermal & magnetic setting 415V, 4 pole, 50Hz of cap 160 Amps 36 KA including fitted in suitable size of enclosure incl taking down old MCCB any type and any size complete after properly disconnecting electric supply properly and making good surface complete all as specified and directed. |
| 143 | S&F MCB TPN 100 Amps 415 Volts incl taking down old MCB any type and any size complete after properly disconnecting electric supply properly and making good surface complete all as specified and directed. |
| 144 | S&F MCB of SPN 63 Amps 240 Volts incl taking down old MCB any type and any size complete after properly disconnecting electric supply properly and making good surface complete all as specified and directed. |
| 145 | S&F MCB of Single pole of rating 6 to 32 Amps 240 Volts incl taking down old MCB of any type and any size complete after properly disconnecting electric supply properly and making good surface complete all as specified and directed. |
| 146 | Taking down AC box any type and any size complete after taking proper disconnecting of electric supply properly and making good surface complete all as specified and directed |
| 147 | S&F MCB Power unit with 4 module steel box consisting of 3 pin 24 Amps socket with Plug top and MCB SP 25 Amps, suitable for operation of AC & Geysers etc., complete all as specified and as directed. (Make :- Havells/Legrand/Anchor) |
| 148 | Earthing complete with galvanised steel earth plate electrode 60cm x 60 cm x 6 mm thick buried directly in ground vertically to a depth not less than 2.25m deep below ground level with top edge of plate not less than 1.5 below ground level connected to GI 4 mm earth wire by means of bolts, nuts check nuts washers made of galvanised iron or steel earth wire protected by GI pipe 15 mm bore light grade connected upto switch board incl 20mm bore GI water pipe with funnel and wire mesh all as shown in electrical plate No.3 of SSR Part I including dearth chamber of PCC 1:2:4 type B1 using 20mm grade aggregate with RCC cover slab 1:2:4 type B1, 40mm thick with 15mm dia MS bar 100mm C/C both ways and 6 MM dia MS hooks complete all as specified and as directed including testing on completion. |
| 149 | Taking down the existing serviceable geyser , removing the cold and hot water hose and fixing the same with new hose after completion of necessary works in bathroom complete all as specified and directed Please Enable Macros to View BoQ information |
