|
| 1 | Dismantling of wrought iron or mild steel work of any description not otherwise complete all as specified and directed. |
| 2 | S&F roof trusses ( framed), trused, purlin, crane gantries, raills and fastenings and heavy braket framing (beams, tee , angle,channel or flat sections) including distance pices, cleats etc(welded/reviting) conforming to Fe 410-W (Gde-E250) quality 'A' complete all as specified and directed. |
| 3 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 4 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof ridge covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 5 | M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specied and directed.Note :- The work described in these items shall be executed in bldgs up to (G+1) floor hence the contractor shall make scaffolding arrangements, trestles, ladders etc and hessian clothes for protection & all other safety precautions up to 02 storeys of buildings and the cost for the same is deemed to be included in the quoted unit rates.Note :- Arrangement of any required machinery / tools required for removing debris from terrace to ground and then remove to outside MOD land, will be made by the contractor and the cost for the same is deemed to be included in the quoted unit rates.Note :- Removing building materials /debris / old waste unwanted existing material of any description or any type etc. to a distance of 5km or beyond out side MOD Land. |
| 6 | M&L Preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer of steel surfaces over 10cm width or girth, complete all as specified and directed. |
| 7 | Demolition of cement concrete (reinforced) below or above the ground floor not exc 15cm thickness (reinforcement cut as required to faciliate demolition) such as cooking platform, chajja etc complete all as specified and directed. |
| 8 | M&L for pre-cast Reinforced Cement Concrete 1:2:4, type B-1 (using 20mm graded stone aggregates) set in cement mortar 1:6 as in kitchen platform, shelves & chajja and similar work incl formwork complete all as specified and directed. Note - Reinforcement shall be measured and paid seperately. |
| 9 | M&L for use & waste wooden form work (rough finished) to soffits of suspended flat slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (horizontal/ sloping), complete all as specified and directed. |
| 10 | M&L for mild steel TMT bars 10 mm dia and above cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 11 | Demolition of Brickwork or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified & directed. |
| 12 | M&L Brick work with sub- class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and directed. |
| 13 | M&L Brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar (1:4) complete all as specified and directed. |
| 14 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 15 | M&L for rendering 10mm thick cement plaster on wall in cement mortar 1:6 on brick wall / Concrete surfaces of finishing the surfaces even and smooth without using extra cement etc. complete all as specified & directed. |
| 16 | M&L for plastering 15mm thick on fair faces of brick masonary surfaces (on vertical surfaces) in cement mortar 1:4 with integral water proofing compound finished even and smooth without using extra cement complete all as specified and as directed. Note: - Water proofing compound shall be measured and paid for separately. |
| 17 | M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and directed. (Note: Payment for providing grooves shall be made separately) |
| 18 | M&L for plastering 5mm thick on fair faces of brick work or concrete surfaces on ceilings in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and as directed. |
| 19 | Supplying only Integral waterproofing compound ISI marked complete all as specified and directed. |
| 20 | M&L for prepration of newly plastered wall sufaces applying birl/J.K. wall care white putty in 2 layers (in 1mm thick each layers) any shape finishing walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10Sqm over new surfaces complete all as specified and directed. |
| 21 | M&L for prepration of new wall plastered surfaces, prepara-tory to distempering & applying birla/J. K. wall care white putty 2 layers (in 1mm thick each layers) any shape for levelling the surfaces including properly making of v shape crakes and filling of all crakes with crakes seal of walls and applying two or more coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified and directed. |
| 22 | M &L for applying three coats of white wash on newly plastered ceiling surfaces including preparation of these surfaces complete all as specified and directed. |
| 23 | M&L for complete removal of existing treatment on walls and prepration of old surfaces and applying birla / J. K. wall care white putty 2 layers (in 1mm thick each layers) over applying Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)including properly making of v shape crakes and filling of all crakes with crakes seal of walls complete all as specified and directed. |
| 24 | M&L for complete removal of existing treatment on wall and prepration of old surfaces and applying birla / J. K. wall care white putty 2 layers (in 1mm thick each layers) for levelling the surfaces including properly making of v shape crakes and filling of all crakes with crakes seal of walls and applying two coat of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified and directed. |
| 25 | M &L for applying two coats of white wash on old decorated ceiling surfaces including prepration of old surfaces complete all as specified and directed. |
| 26 | M&L nonskid coloured ceramic tiles 7 to 8 mm thick area of each tile exc 0.11 Sqm but not exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match coiour/shade including 15mm thick screed bed layer in CM 1:6 ncluding dismantling of floor, hearth tiling including cement mortar bedding and removing of rubbish off the premises complete all as specified and directed. |
| 27 | M&L glazed ceramic coloured tiles on vetical surfaces size 600x1200x8mm to 10mm thick over & including 10mm thick rendering in CM 1:4 and tiles fixed in walls with wall tile with costra tile adhesive cosmic silvwe type 1T (EN-STD C1TE) and including dismantling of floor, hearth tiling including cement mortar bedding and removing of rubbish off the premises complete all as specified and directed. |
| 28 | M&L full body ceramic coloured tiles 10-16mm thick (square/ rectangular) tiles, area of each tiles exceeding 0.36 sqm but not exceeding 1.60 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15mm thick screed bed layer in CM 1:6 ncluding dismantling of floor, hearth tiling including cement mortar bedding and removing of rubbish off the premises complete all as specified and directed. |
| 29 | Demolition of PCC and pavings n exc 15 cm thickness below or above ground level (unreinforced) including removal of deberies complete all as specified and directed. |
| 30 | M&L for 25mm thick PCC (1:2:4) type B-0 using12.50mm graged stone aggregate as in floors finished rough to receive the tiles complete all as specified & directed. |
| 31 | M&L PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in mass concrete as in foundation filling and mass concrete complete all as specified and directed. |
| 32 | M&L for 75mm thick PCC 1:3:6 type C-2, (using 40mm graded stone aggregates) as in plinth protection finishing cement concrete surface even and smooth without using extra cement & provided with construction joint on the interval not more than 3.0m and filled with bitumen and sand mortar in 1:3 complete all as specified and directed. |
| 33 | M&L for 18-20 mm thick size mirror polished machine cut kota stone slab flooring not less than 600X1200 mm over 20mm thick screed in CM(1:6) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing including dismantling of Kota stones and tiles laid, bedded and pointed in any mortar of any description or thickness etc complete all as specified and directed. |
| 34 | M&L for Kota stone flooring 18-20 mm thick in riser of steps, skirting, dado etc mirror polished Machine cut Kota stone laid over and including 15 mm thick screed in CM(1:6) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & mirror polishing including dismantling of Kota stones and tiles laid, bedded and pointed in any mortar of any description or thickness etc complete all as specified and directed |
| 35 | M&L for mirror polishing on marble/granite/Kota stone/ stone work where ever required to give high gloss mirror finish complete all as specified and as directed. |
| 36 | S&F 80mm thick Machine pressed precast cement concrete coloured chemically treated rubber moulded interlocking paver block with grey cement and no pigment any shape and size confirming to IS- 15658-2006 of M-40 grade, laid on sand cusion of 50mm thick complete all as specified and as directed. |
| 37 | M&L for 50mm thick Sand filling under floors/interlocking paver block or in foundations including watering and consolidation complete all as specified and directed. |
| 38 | M&L for 16 to 18mm thick Granite slab of any shade ( table rubbed and polished ) machine cut for floor /shelves in steps, jambs, pillars, window cills& cooking plateforms over 15 mm thick cement mortor 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match shade of the slabs laid bedded and pointed in any mortor complete all as specified and directed. |
| 39 | M&L for rounding to the edge of stone slabs one edge such as in steps, cooking plateform and other similar situations complete all as specified and as directed. |
| 40 | M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed. |
| 41 | Taking down chowkhats or frame exc 1.50 Sqm but n exc 4 Sqm each with shutters (with out taking off shutters from the frames) complete all as specified and directed. |
| 42 | Taking down chowkhats or frame n exc 1.50 Sqm each with shutters (with out taking off shutters from the frames) complete all as specified and directed. |
| 43 | S&F factory made Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced but single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheetwith M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 44 | S&F Factory made 30mm thick (stiles), Solid PVC Moulded Door Shutter with wood free EPS, with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, but 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back facesupplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 45 | S&F factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) (A) Area not exceeding 2.00 sqm each, complete with all fitting and fixture all as specified and directed. |
| 46 | S&F pressed steel frames of size 125mm X 60 mm with rebate on both side including necessary fixing lugs, hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) complete all as specified and directed. |
| 47 | S&F pressed steel frames of size 105 X 60 mm with one or more rebates including necessary fixing lugs, hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) complete all as specified and directed. |
| 48 | M&L for PCC 1:3:6 type C1 using (20mm graded stone aggregates) as in back filling of pressed steel frame, hold fast, cills, copings, bed plates, plinth courses, including necessary form work complete all as specified and as directed. |
| 49 | S&F 35mm thick factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separatelyall as per direction of Engineer-In- Charge. |
| 50 | S&F 35mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and \prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied complete all as specified and directed |
| 51 | S&F 1st class hardwood small fitting such as shaped door stopper, brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n- exc 200 cu. cm each complete all as specified and as directed. |
| 52 | S&F aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples, complete all as specified and directed. |
| 53 | S&F in repair wire netting of galvanised steel wire 1.40mm dia fixed with tinned tacks of wire staples fixwed with wooden beadings complete all as specified and directed. |
| 54 | M&L for preparation of new wooden surfaces of any description, not otherwise described over 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 55 | S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P.brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge complete all as specified and directed. (Note: weight not less than 2.5Kg/Sqm) |
| 56 | S&F 3mm thick sheet glass ordinary quality and glazing with oil putty and pin in square nexc 0.5 sqm in each pane complete all as specified and as directed.. |
| 57 | S&F ISI marked MS butt hinges medium weight cold rolled mild steel of 125 mm and fixed with screw complete all as specified and directed |
| 58 | S&F aluminium anodised barrel tower bolts of extruded section, length of bolt in 200 mm and fixed with machine made screws complete all as specified and directed |
| 59 | S&F aluminium handles 150 mm size, cast type, anodised. and fixed with machine made screws complete all as specified and directed |
| 60 | S&F aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 61 | S&F 1.50mm thick powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) (Thickness or powder coating not less than 50 micron).complete all as specified complete all as specified and directed. |
| 62 | S&F 12mm thick Toughned glass as in ,Urinal partitions ,automatic doors and similar work including cutting to shape, drilling holes required.complete all as specified and directed. |
| 63 | S&F in repairs 25mm nominal dia Drappery curtain rods decorative type stainless steel 304 Grade, having wall thickness 1.40 mm of approved quality/make including fixing of two number decorative brackets fixed in brick/concrete wall, Two number knob on both ends of curtain rods complete all as directed and specified. |
| 64 | S&F Rotational moulded polyethylene water storage tanks capacity 1000 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I and incl dismantling of old unserviceable Water tank and removing from site complete all as specified and directed. |
| 65 | S&F 20mm Ball valves, high pressure of PTMT with high density plastic bass screwed for iron pipe and fixed (min wt 20mm - 210 gms) complete all as specified and directed. |
| 66 | S&F in repairs 20mm dia bore Gun metal, Globe or gate valves, with iron head or lever screwed both ends for iron pipe complete all as specified and directed. |
| 67 | S&F 15mm Galvanised Mild steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors incl taking down 15 mm dia GI tubing and connection complete all as specified and directed. |
| 68 | S&F 20mm Galvanised Mild steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors including taking down 20 mm dia GI tubing and connection complete all as specified and directed. |
| 69 | S&F in repairs 600mm long brass chromium plated tubular towel rail, 20 mm dia, D type, between flanges fixed with and including chromium plated screws and wooden /plastic cleats (min wt 190 grams) complete all as specified and directed. |
| 70 | S& F in repairs looking mirror of selected quality glass 6mm thick mounted on without frame, fixed with Stainless steel studs screws including with all accessories & fittings etc complete all as specified and directed. |
| 71 | S&F in repair vitreous china squatting pan “ORISSA” pattern size 580mm X 440mm, white with P or S trap front or back inlet with integral foot rest (excl flushing cistern & flush pipe) and including connection to trap & to flushing pipe anti syphonage pipe etc (excluding flushing cistern) complete including making good to floor complete all as specified and directed. |
| 72 | S & F in repair PVC valveless Syphonic action type, Flushing cistern 10 litres capacity low level, white with inlet ball valve float handle and flush pipe 32 mm bore and brackets,complete all as specified and directed. |
| 73 | S&F in repair Thin Rim Table top basin of size: 360x360x120mm Jaquar code : SLS-WHT-6905 / Cera Code :A2020124SN / Kohler Code : K-90012T-0 in white colour with Click clack waste 32 mm size full thread with 130 mm height, Jaquar Code: ALD-BGP-727L130 /Cera Code :F8050301 / Kohler Code : K-20746IN-CP modern design with Round shape, slim edges, with tap hole, anti bacterial glaze on ceramic, smooth glaze surface incl fixing on plateform with all required accessories/ fixtures complete in all respect as specified and directed |
| 74 | S&F in repair half stall urinal of Vitreous China (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) Model No - Parry ware Cat part No.- Whiz C0580 and kit C8123 OR Equivalent. |
| 75 | S&F in repair 32 mm dia Brass chromium plated bottle traps for wash basins/urinals with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete in all respect as specified and directed. |
| 76 | S&F in repair sinks made of stainless steel 1mm thick kitchen or labortory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified & directed. |
| 77 | S&F in repairs 15mm dia Bib tape fancy typ brass chromium plated long body with capstan head screwed down for iron pipe complete all as specified and directed. |
| 78 | S & F in repairs 15mm dia shower rose fancy type brass chromium plated, including 125mm long shower arm as approved by GE, with or without swivel joints, including fixing to steel pipe complete all as specified and directed. |
| 79 | S&F PVC connections 15mm bore size 450 in length with both end brass/pvc high quality nuts complete all as specified. |
| 80 | S&F in repairs 15mm dia stop valves/angle valve, cast copper alloy chromium plated, fancy type, screwed down, high pressure, with scrutch or butter fly handle screwed both ends for iron pipe or for unions, complete all as specified and directed. |
| 81 | S&F in repairs 15mm dia CP angle valve/concealed stop cock cast copper alloy (ISI Markd) fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure with capstan head screwed bnoth ends for iron pipe 15mm bore dia in repair, complete all as specified and directed. |
| 82 | Taking down all AC/ PVC pipes (including all fitting , with spigot and socket ends lead joints including burning out joints of 100 mm dia pipe complete all as specified and directed. |
| 83 | S&F in repairs 110mm dia PVC (SWR) pipes single soketed in any length with rubber ring jointed laid in trenches or in floors complete all as specified and directed. |
| 84 | S&F in repairs 75 mm dia PVC (SWR) pipes single soketed in any length with rubber ring jointed laid in trenches or in floors complete all as specified and directed. |
| 85 | S&F PVC (SWR) bends 110 mm dia with access door complete all as specified and directed. |
| 86 | S&F PVC (SWR) bends 75 mm dia complete all as specified and directed. |
| 87 | S&F PVC (SWR) 110 mm dia junction, single(single 'T') equal or unequal with acess door complete all as specified and directed. |
| 88 | S&F PVC (SWR) 75 mm dia junction, single(single 'T') equal or unequal complete all as specified and directed. |
| 89 | S&F 110mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 90 | S&F in repairs of 75mm dia PVC (SWR) multi floor trap with Hinge type SS grating including jointing with solvent cement etc. |
| 91 | S&F stainless steel (Gde SS -304) rectangular Floor/marble insert Shower channel drain size 450 mm x 100mm x30 mm jointing with solvent cement etc. complete all as specified and directed. |
| 92 | S&F Single leaf panic bar metal Fire door with all accessories (Frame 100x50x1.5mm,Shutter 46mm made from 2nos 1mm thick GI Sheet with infill of Honeycomb/Rockwool. Hinges 4nos SS 304 Fire rated UL Listed, Door Closer 80kg UL Listed Std. Arm. Fire rated, 1 Vision Panel 300x300x6mm Schott/Keralite Fire rated along with Gaskets, Single Point Panic Bar with Trim and Installation of doors as per ground complete all as specified and directed. |
| 93 | S&F 18 to 19mm thick pre-laminated paticle board, as in cupboards, shelves, pelmets etc sexterior grade, pre laminated one side decoraded choice lamination and other side balancing white lamination cut to required size and fixed to frame and corner finish with wooden beads and including polishing of wooden beads complete all as specified & directed. |
| 94 | S&F in repair Continuous (piano) hinges, width of flaps (when open)- 30mm brass , bright finish or electrogalvanised complete all as specified and directed. |
| 95 | S&F 100mm long Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified & directed. |
| 96 | S&F in repairs 40mm dia brass, polished, bright finished cupboard knobs fixed with nut, screw and washer as etc. complete all as specified and directed. |
| 97 | S&F in repairs ball catches magnet type , with striking plate complete all as specified and directed. |
| 98 | Taking down copper/aluminium point wiring (light fan, socket or power) complete including fittings such as switch, sockets, c/rose, lamp holders, tube light fittings, sketch fitting , wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall floor etc. complete all as specified and directed. |
| 99 | Taking down main switch, DB/change over/VTPN, MCCB AC box of any capacity complete all as specified and directed. |
| 100 | M&L for concealed point wiring with 1.5 Sqmm PVC-FRLSH insulated, sheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes & modular white cover plate with frame as per site requirement all fittings such as tees, bends, elbows, etc. of External diameter 20mm all as per site requirements PVC insulated & sheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and directed. |
| 101 | For one light, fan point controlled by one switch |
| 102 | For one 5 Amp independent socket point controlled by one switch |
| 103 | For one 3 pin ,5 Amp socket point with other switch on the same board |
| 104 | All as per item No 100 here in before but for power point wiring using with 2.5 sqmm PVC-FR LSH insulated ,sheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,sheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead complete all as specified and directed. |
| 105 | S&F Modular switch, one way, 6 Amp 230V, 1 module complete all as specified and directed. |
| 106 | S&F socket Modular 6 Amp-2/3 pin combined 2 module complete all as specified and directed. |
| 107 | S&F switch Modular, single pole, one way,16 Amp ,1 module 230 Volt complete all as specified and directed. |
| 108 | S&F socket modular 6/16 Amp, 2/3 pin combined ,2 module 230 Volt complete all as specified and directed. |
| 109 | S&F ceiling rose, surface backlite,three terminal complete all as specified and directed. |
| 110 | S&F Modular lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed. |
| 111 | S&F modular fan step regulator 60-80W 2 module complete all as specified and directed. |
| 112 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 113 | S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 114 | S&F LED bulb 10 watt suitable for angle / batten holder fitting complete all as specified and directed. |
| 115 | Taking down and refixing fan, sealing cable end, dismantling blades and removing fan and blades and deposited to MES store complete all as specified and directed. |
| 116 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 117 | Supply and fix exhaust fan, steel body AC single Phase. 230V , 50Hz,1200 RPM copper winding of sweep 450 mm heavy duty with blades, and frame and louvers complete all as specified and directed. |
| 118 | M&L concealed sub main wiring with two single core PVC FRLS insulated unsheathed stranded copper conductor cable FRLS, 02 runs of 01 Single core of size 6 sqmm (for main current) drawn in & incl PVC conduit conduit less than 20mm dia ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 6 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified incl. taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed. |
| 119 | M&L concealed sub main wiring with two single core PVC FRLS insulated unsheathed stranded copper conductor cable FRLS, 02 runs of 01 Single core of size 10 sqmm (for main current) drawn in & incl PVC conduit conduit less than 20mm dia ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 10 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified incl. taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed. |
| 120 | Supply and fixing 6 - 32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 121 | Supply and fixing 32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 122 | All as per item no 118 above but SPN 32 Amps, 240 V complete all as specified and directed. |
| 123 | S&F sheet metal enclosure DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar of suitable size complete all as specified and directed. |
| 124 | S&F double door metallic sheet metal enclosure DB double door(DPX-125 ) VTPN suitable for housing 125 MCCB as incomer 4 Way 415 Volts with 200 Amps rated bus bars complete all as specified and directed. |
| 125 | S&F MCCB 125 Amps 4 pole, suitable for 415 V breaking capacity 16 KA connected in wall/surface with wire and lugs complete all as specified and directed. |
| 126 | Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. |
| 127 | S&F Modular AC box enclosure with socket plug top and MCB SP 25 Amps flush mounting enclosure complete all as specified and directed. |
| 128 | M&L for GI pipe bracket of size 40 mm dia medium grade of length not less than 1.5 Mtr long and bent to a shape incl fixing wall with 02 Nos MS flate clamp of suitable size incl nut bolt and washers complete all as specified and as directed. |
| 129 | M&L for provn of Earthing complete with galvanised steel earth plate electrode, 600x600x6mm buried directly in ground (Earth pit not less than 2.25M deep below the GL) with top edge not less than 1.5 metres below ground level connected with galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers of GI or steel all as shown in electric plate no 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed. Note :- (i) The rate quoted shall also deemed to include the cost of GI wire and protection pipe upto 7.5 Mtr beyond the earth plates electrode and also the cost of the Test point. (ii) Joining of GI earth wire with pipe of the test point shall be done by using suitable cable lugs. |
| 130 | Supply, install, commissioning and testing of commercial Air curtain unitof size 58\\" X 78\\" for prevention of dust and conditioned air losses, single phase, 220 V, 50 HZ, made out of MS/CRCA sheet of minimum thickness 18 gauge finished with two coats of red oxide primer and final coat of synthetic enamel paint (oven baked) with MS CRC 18 gauge square perforated suction grills, Aluminium alloy fans and single phase electric motor, nozzles etc, complete with fittings and accessories so as to produce 1 - 1.5 m/sec air velocity at floor level for door opening complete all as specified and directed. |
| 131 | Supply and erect factory fabricated Rectangular square duct made out of 24 gauge GI sheet in L shaped hollow profile and all accessories such as corner, carriage bolt hangers, gasket and seal the longitudinal joints with and including approved sealant complete all as specified and directed. |
| 132 | Supply and Fix fire retardent canvace connection at machine/cooler outlet complete all as specified and directed. |
| 133 | Supply and fix desert cooler electric driven (single phase), having nominal air flow capacity of 20000 CuM per hour suitable for large room having windows doors upto 2500sqft with UV stablised high grade plastic/steel having four sides cooling paid for superior cooling complete all as specified and directed. |
| 134 | Supply and fix heavy duty exhaust fan, steel body AC single Phase. 230V , 50Hz,1200 RPM copper winding of sweep 600 mm with blades, and frame and louvers complete all as specified and directed. |
| 135 | Supply and Fix Aluminium double deflection grills with VCD complete all as specified and directed. |
| 136 | Taking down old service cable and Supply and laying cable XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade cross sectional area 35 sqmm 3.5 core complete all as specified and directed. |
| 137 | Excavation in trenches n. exc 1.5 mtr wide and n. exc 1.5 mtr depth for laying of cable as the case may be and getting out hard / dense soil complete all as specified and directed. |
| 138 | Returning filling, spreading, leveling, watering and well ramming in layers n. exc 25 cm thick complete all as specified and directed. |
| 139 | Removing excavated surplus material n. exc 50 mtr and depositing where directed at a level n. exc 1.5 mtr from starting point complete all as specified and directed. |
| 140 | Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm complete all as specified and directed. |
| 141 | S&F in replacement of GI Pipe light grade 50 mm dia ISI marked on pole on wall or laid in trenches incl all fittings (nut, bolt, clamps & washers) complete all as specified and directed. Please Enable Macros to View BoQ information |
