|
| 1 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed by Engr-in-Charge. |
| 2 | Rolled mild steel work as in roof trusses(framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing(Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to grade Fe-410 W(Gde E-250) quality-A, steel work, complete all as specified and directed by Engr-in-Charge. |
| 3 | Rolled mild steel plates (plain or chequere d) channels, squarecut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to grade Fe.290.Gde-E-165, steel work, complete all as specified and directed by Engr-in-Charge. |
| 4 | Mild steel framed work such as grills, gratings with ends of bars shouldered or reveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways railings, frame work of water tanks and similar works, conforming to Fe-290, Gde E-165, complete all as specified and directed by Engr-in-Charge. |
| 5 | Welded steel wire fabric supplied and fixed to wood or steel members weight not exc. 4 kg per square metre, complete all as specified and directed by Engr-in-Charge. |
| 6 | Dismantling bestos cement (corrugated, semi corrugated, etc) sheets in roof coverings, complete all as specified and directed.. |
| 7 | M&L prepainted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed by Engr-in-Charge. |
| 8 | M&L prepainted galvalume aluminium zink coating GI based in steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed by Engr-in-Charge. |
| 9 | Demolition of brick work or stone /boulder masonry, built in cement mortar, including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc, complete all as specified and directed by Engr-in-Charge. |
| 10 | Brick work with sub class 'B' bricks straight or curved on plan, exceeding 6 m mean radius with old size bricks, built in cement mortar 1:6, complete all as specified and directed by Engr-in-Charge. |
| 11 | Description all as per Ser item No 10.00 here-in-before but except bricks, complete all as specified and directed by Engr-in charge. Note : Old bricks obtained against demolition shall be used. |
| 12 | Supply only integral water proofing compound as per latest IS specification, complete all as specified and directed by Engr-in-Charge. |
| 13 | Demolition of cement concrete (unreinforced) in ground floor and in paving’s not exceeding 15 cm thickness (below or above ground level), complete all as specified and directed by Engr-in-Charge. |
| 14 | Taking down chowkats or frames including shutters (without taking off shutters from the frames) any type and in any size and removing from site, complete all as specified and directed by Engr-in-Charge. |
| 15 | Taking down shutters of any description exceeding 1.00 Sqm and not exceeding 2.00 Sqm each, and removing from site, complete all as specified and directed by Engr-in-Charge. |
| 16 | Taking down steel windows including frames and shutters any size and removing to store, complete all as specified and directed by Engr-in-Charge. |
| 17 | S&F 2nd class hard wood (sal/hollock), glazed and skelton shutters 35mm thick open rebated and prepared to receive glass, gauge,etc. (without sash bars), edges of framing palin, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Pt-I Section 8.24(a) supplied and fitted to chowkhats complete including fixing only iron mongery such as tower bolt, handle, hinges, aldrop bolt etc, complete all as specified and directed by Engr-in-Charge. |
| 18 | S&F factory made, 2nd class hard wood (sal/hollock), plain framed, panelled shutters (two -three panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick complete including fixing only iron mongery such as tower bolt,handle,hinges,aldrop bolt etc, complete all as specified and directed by Engr-in-Charge. |
| 19 | S&F factory made flush shutters, 35mm thick, solid core construction with block board core & ply wood face panels, commercial type on both side incl 40X 6mm thick 2nd class HW lipping on edge, complete all as specified and directed by Engr-in-Charge. |
| 20 | Solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2004), complete all as specified and directed by Engr-in-Charge. |
| 21 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004), complete all as specified and directed by Engr-in-Charge. |
| 22 | Factory made solid PVC moulded door shutter ( with particle board core) of 30mm thick with 2 raised panel design with 2mm thick moulded PVC sheet on back face & 2mm coloured prelaminated PVC sheet on front face as specified in SSR Part II 2010 Sec 8 clause 8 B 1 to 8B 2.1, complete all as specified and directed by Engr-in-Charge. |
| 23 | S&F steel window (box type) factory made with sidehung shutter including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing barsdovetailed or welded including one shop coat of red oxide primer, complete all as specified and directed. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 . ii) MS fillets, glazing wire gauge shall be measured and paid seprately, complete all as specified and directed by Engr-in-Charge. |
| 24 | Description all as per Ser item No 24.00 here-in-before but without glazing bar, complete all as specified and directed Note : i) The window shall be fabricated as per Drg No Z/TD/1269/2008 sheet 1/3 to 3/3. ii) MS fillets, glazing, wire gauge shall be measured and paid seprately, complete all as specified and directed by Engr-in-Charge. |
| 25 | S&F aluminum handles cast type, anodised, 150 mm size, complete all as specified and directed by Engr-in-Charge. |
| 26 | S&F in repair mild steel cold rolled butt hinges medium weight 100 mm long, including fixing and welding to pressed steel/wooden door frame if required, complete all as specified and directed by Engr-in-Charge. |
| 27 | S&F of 200-250 mm long mild steel barrel tower bolts, stove enameled black, with bright bolt, complete all as specified and directed by Engr-in-Charge. |
| 28 | S&F of mild steel sliding door bolt plate type 250-300 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a inimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified and directed by Engr-in-Charge. |
| 29 | Preparation of new/old wooden surfaces of any description not otherwise described, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed by Engr-in-Charge. |
| 30 | Pressed steel frames of size 105x60mm for doors with one ormore rebates including necessary fixing l ugs, hinges, lock strike plate, etc and providing one shop coat of primer and tarring back side of frame, complete all as specified and directed by Engr-in-Charge. |
| 31 | Pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and taring back side of frame, complete all as specified and directed by Engr-in-Charge. |
| 32 | M&L for providing cement concrete 1:3:6 type C-0 using 12.5mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast, complete all as specified and directed by Engr-in-Charge. |
| 33 | S&F of stainless steel wire clothcut for new/old door & window to size, 0.36 mm nominal dia wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staple in repairs, complete all as specified and directed by Engr-in-Charge. |
| 34 | Dismantling floor, hearth or wall tiling including CM bedding but not backing, removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed by Engr-in-Charge. |
| 35 | M&L for ceramic coloured 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor/ etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid, complete all as specified and directed by Engr-in-Charge. |
| 36 | Description all as per Ser item No 35.00 here-in-before but on skirting over vertical surfaces & including 10 mm thick cement mortar 1:4 screed,/plaster set and jointed with grey cement slurry and pointed in grout of matching shade of tiles, complete all as specified and directed by Engr-in-Charge. |
| 37 | Glazed ceramic coloured tiles area exc .06 Sqm and n exc 0.16 Sqm each of 7mm thick as in vertical/Dado surfaces such as skirting dado etc set and jointed in neat cement slurry, jointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 to receive tiles, complete all as specified and directed by Engr-in-Charge. |
| 38 | Digital ceramic coloured tiles exc 0.11 sqm each tile and not exceeding 0.18 sqm but not exceeding 0.18 sqm sqm,7mm thick as in vertical/Dado surfaces such as skirting dado etc set and jointed in neat cement slurry, jointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 to receive tiles, complete all as specified and directed by Engr-in-charge.Glazed ceramic coloured tiles exceeding .075 sqm but not exceeding 0.15sqm as in vertical/Dado surfaces such as skirting dado etc set and jointed in neat cement slurry, jointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 to receive tiles, complete all as specified and directed by Engr-in-Charge. |
| 39 | M&L for Non skid coloured 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid, complete all as specified and directed by Engr-in-Charge. |
| 40 | M&L Add to rates for item no 38 to 42 for joint free Coloured tiles Non skid/ceramic/digital/glazed tiles, complete all as specified and directed by Engr-in-Charge. |
| 41 | M&L Screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:6, for laying floor finishes, complete all as specified and directed by Engr-in-Charge. |
| 42 | S & F for Vitrified coloured ceramic tile 10mm thick double charged light shade (square / rectangular) polished, area of each tile exceeding 0.36 sqm in floors/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed by Engr-in-Charge. |
| 43 | M&L Screed bed or bedding layer of mortar 20 mm thick in Cement Mortar 1:6, for laying floor finishes, complete all as specified and directed by Engr-in-Charge. |
| 44 | Demolition of granite slabs laid bedded pointed in any mortar or of any description and thickness, complete all as specified and directed by Engr-in-Charge. |
| 45 | Material and labour for 18-20mm thick Mirror polished, high gloss finish Granite (absolute Jet Black) work in Cols,Slab,steps, jambs & soffits of chowkhat (incl necessary pasting), pillars, window-cills, basin platforms, urinal partitions and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl necessary cutting for sunk basin/sink, making holes for fixing hinges, door bolts, etc, complete all as specified and directed by Engr-in-Charge. |
| 46 | Cutting/clearing of small plants, bushes, wild vegetation growth and removal of rubbish and other materials upto a distance exc. 50mtr but n. exc 100mtr, complete all as specified and directed by Engr-in-Charge. |
| 47 | Surface dressing n.exc 15cm deep in any type of soil above or bellow ground level, complete all as specified and directed by Engr-in-Charge. |
| 48 | Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for surface channels, complete all as specified and directed by Engr-in-Charge. |
| 49 | M&L for PCC 1:2:4, type B-1, using 20mm graded crushed aggregate as in surface channels and drains, complete all as specified and directed by Engr-in-Charge. |
| 50 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc, complete all as specified and directed by Engr-in-Charge. |
| 51 | Add or deduct for each 25 mm girth or part thereof over or under 30cm ditto surface channels, complete all as specified and directed by Engr-in-Charge. |
| 52 | M & L for 75mm thick cement concrete type C-2, 1:3:6 (using 40mm graded aggregate) as sub base and hard standing finished fair & even without using extra cement, complete all as specified and directed by Engr-in-Charge. |
| 53 | M&L PCC (1:4:8) type D2 using 40mm graded aggregate 100mm thick as in sub base, complete all as specified and directed by Engr-in-Charge. |
| 54 | M&L 75mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggr) as in plinth protection/path finishing the surface even and smooth without using extra cement complete all as spd and directed. Note : Plinth protection shall be laid in (1:20) slope. The concrete shall be laid at a stretch not exceeding 3metre in length. Joint gap between adjoining slab, at corners and at junctions of walls shall not exceed 10mm in width and shall be sealed with mastic filling i.e. one part of bitumen 85/ 25 grade mixed with 3 part of sand. Top surface of concrete shall be finished even and smooth without using extra cement. Joints shall be provided at not more than 3 metre interval at corner and as junction of walls, complete all as specified and directed by Engr-in-Charge. |
| 55 | Material and Labour for chequered/Durastone' ceramic tiles, coloured/designer, 12 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sq M but not exceeding 0.11 Sq M, conforming to IS 4457-2007, on floors, set over and including 20 mm thick screed bed in cement mortar (1: 4) and jointed in neat cement slurry and pointed in white cement mixed with pigment to match colour, , complete all as specified and directed by Engr-in-Charge. |
| 56 | Providing and laying 60mm thick factory made chamferd edge cement concrtete paver block of M-35 grade with approved colour ,design and patternas in foot path ,lawns, driver ways light parking etc. of required strength and thickness shape, made by table vibratory method using bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed by Engr-in-Charge. |
| 57 | M&L, sand cushioning to under concrete interlocking paver block including watering & consolidation, complete all as specified and directed by Engr-in-Charge. |
| 58 | Taking down cement plaster including tiles of any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed by Engr-in-Charge. |
| 59 | Rendering 15mm thick in cement mortar 1:4 on fair faces of bricks work/concrete surface finished the surface even and smooth (without using extra cement) as on walls, complete all as specified and directed Notes :- Plaster shall be carried out upto any height in atches and contractor shall have no claim for height and scaffolding what so ever is required to complete the work, complete all as specified and directed by Engr-in-Charge. |
| 60 | Rendering 10mm thick in cement mortar 1:6 on fair faces of bricks work/concrete surface finished the surface even and smooth(without using extra cement) as on walls, complete all as specified and directed by Engr-in-charge. Notes :- Plaster shall be carried out upto any height in patches and contractor shall have no claim for height and scaffolding what so ever is required to complete the work, complete all as specified and directed by Engr-in-Charge. |
| 61 | Rendering 05mm thick in cement mortar 1:3 on fair faces of concrete surface as on ceiling, facia and stair cases etc finished the surface even and smooth (without using extra cement), complete all as specified and directed Notes :- Plaster shall be carried out upto any height in patches and contractor shall have no claim for height and scaffolding what so ever is required to complete the work, complete all as specified and directed by Engr-in-Charge. |
| 62 | M&L for preparation of newly plaster surfaces of wall by using sand paper and applied two coats of ( two- three layer) total thickness 1.5mm @ 1.5 kgs/sqm of Altel/Birla white putty to obtain smooth/ even finish using sand paper and applying two coats of Oil Bomd Distemper over one coat of alkali resistant cement based priming paint complete all as specified and firected, complete all as specified and directed by Engr-in-Charge. |
| 63 | Preparation of newly plastered surfaces of wall and applying two coats of cement base paint white or tinted over a coat of white primer alkali resistant priming paint, complete all as specified and directed by Engr-in-Charge. |
| 64 | M&L two coat of cement base paint over one coat of alkali resistant priming paint over old plastered surfaces of wall including preparing surfaces after complete removal of existing treatment upto 12-15m height from ground lavel and at all locations as directed including scaffolding, cleaning and curing etc, complete all as specified and directed by Engr-in-Charge. |
| 65 | Preparation of old plastered/unplastered wall surfaces and applying one coat of white wash, complete all as specified and directed by Engr-in-Charge. |
| 66 | Preparation of newly plastered surfaces of ceiling and two coat of colour wash over one coat of primer applying Chalk whiting, on plastered surfaces, complete all as specified and directed by Engr-in-Charge. |
| 67 | Taking up or down steel tubing with connections for cleaning for refixing or removing to toreyard complete of bore 15mm, complete all as specified and directed by Engr-in-Charge. |
| 68 | Taking up or down steel tubing with connections for cleaning for refixing or removing to storeyard complete of bore 20mm, complete all as specified and directed by Engr-in-Charge. |
| 69 | M&L for steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15 mm, complete all as specified and directed by Engr-in-Charge. |
| 70 | Fixing only Steel water tubing 15mm dia medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors, complete all as specified and directed by Engr-in-Charge. |
| 71 | M&L for steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts,diminishing pieces, caps and plugs, unions etc.) of nominal bore 20 mm, complete all as specified and directed by Engr-in-Charge. |
| 72 | Fixing only Steel water tubing 20mm dia medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors, , complete all as specified and directed by Engr-in-Charge. |
| 73 | S & F in repair Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity (Tripple layer) white in colour including water tank cover (internaly/interlocking arrangment for water tank cover), hoisted and fixed in position including tank nipple inlet & outlet and connecting up pipes, complete all as specified and directed by Engr-in-Charge. |
| 74 | Supply and fixing in repair ball valves of size 15 mm bore dia high pressure of PTMT (Make-Prayag) with epoxy coated aluminium rod and high density plastic ball (Minimum weight not less than 210 gms) screwed for iron pipe and fixed including necessary fitting as reqd at site, complete all as specified and directed by Engr-in-Charge. |
| 75 | Supply and fixing in repair ball valves of size 20 mm bore dia high pressure of PTMT (Make-Prayag) with epoxy coated aluminium rod and high density plastic ball (Minimum weight not less than 210 gms) screwed for iron pipe and fixed including necessary fitting as reqd at site, complete all as specified and directed by Engr-in-Charge. |
| 76 | Supply and fixing in repair angle valves cast copper alloy 15mm one/two way , screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions including necessary fitting as required at site, complete all as specified and directed by Engr-in-Charge. |
| 77 | S&F in repair 15mm dia stop cock fancy type chromium plated, complete all as specified and directed by Engr-in-Charge. |
| 78 | S&F bib cock 15mm bore fancy type long body chromium plated in repair, complete all as specified and directed by Engr-in-Charge. |
| 79 | S & F in repair 20 mm dia gun metal, globe or gate valves/Angle Valve one way or two way , with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed by Engr-in-Charge. |
| 80 | Preparation of new steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed by Engr-in-Charge. |
| 81 | Material and labour 40 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in floor, complete all as specified and directed by Engr-in-Charge. |
| 82 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided, complete all as specified and directed by Engr-in-Charge. |
| 83 | M & L RCC M-25 (Design Mix) (20 mm graded aggregate)as in beams, bressumers, cantilevers, lintels over 1.5m span, complete all as specified and directed by Engr-in-Charge. |
| 84 | M&L RCC M-25 (Design Mix) (20 mm graded aggregate) Slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed by Engr-in-Charge. |
| 85 | Excavation in post holes (or similar holes) each n. exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers n. exc 25 cm watering and removing surplus soil to distance n. exc 50m and making good surfaces in soft/loose soil, complete all as specified and directed by Engr-in-Charge. |
| 86 | M&L for cement concrete type C2 (1:3:6) in foundations, filling and mass concrete/ sub base using 40mm graded stone aggregates , complete all as specified and directed by Engr-in-Charge. |
| 87 | Providing and applying Polymer modified cement mortar of average thickness 15-20mm using Polymer in one or more layers in proportion 1:5:15 of Polymer Cement Quartz Sand as manufacturer’s specifications in specific layers, curing the surface after 72 hours of application with wet gunny bags etc and by finishing the surface with 12mm thick (1:3) Cement sand plaster, complete all as specified and directed by Engr-in-Charge. |
| 88 | Providing and applying Polymer modified cement mortar of average thickness 30-40mm using Polymer in two layers in proportion 1:5:15 of Polymer Cement Quartz Sand as manufacturer’s specifications in specific layers, curing the surface after 72 hours of application with wet gunny bags etc and by finishing the surface with 12mm thick (1:3) Cement sand plaster, complete all as specified and directed by Engr-in-Charge. |
| 89 | M & L form work Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) rough finished surface of concrete in Square or rectangular section, complete all as specified and directed by Engr-in-Charge. |
| 90 | M & L Formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. rough finished, complete all as specified and directed by Engr-in-Charge. |
| 91 | TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for slabs,beam, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and directed by Engr-in-Charge. |
| 92 | TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for slabs,beam hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and directed by Engr-in-Charge. |
| 93 | Hacking out old broken glasses (any thickness, size, quality or description) from wooden frames or steel frames, glazed with putty or fixed with wooden beads, complete all as specified and directed by Engr-in-Charge. |
| 94 | 5.50mm tinted/frosted black glass, selected quality and glazing with rubber neoprene packing for doors/windows in re/rectangular exc 0.5 sq. m in each pane included all connected accessories, complete all as specified and directed by Engr-in-Charge. |
| 95 | 4 mm thick sheet glass ordinary quality, and glazing with oil putty or wooden beads in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed by Engr-in-Charge. |
| 96 | S & F in repair 32 mm dia waste coupling of PTMT (half or full threaded) (minimum weigh 45 gms), complete all as specified and directed by Engr-in-Charge. |
| 97 | 10 litre capacity PVC, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, 32 mm dia PVC flushing pipe and 15 mm dia 450 mm long PVC connection with PTMT waste coupling (fixed in repair), , complete all as specified and directed by Engr-in-Charge. |
| 98 | PVC connection suitable for 15 mm pipe with PTMT nuts and washers for both ends of length 450 mm long, (fixed in repair), complete all as specified and directed by Engr-in-Charge. |
| 99 | S&F stainless steel grating doom 100mm dia with or without hole, complete all as specified and directed by Engr-in-Charge. |
| 100 | S & F 110mm bore PVC (SWR) pipes signle socketed, in any length with rubber ring joints, laid in trenches or in floor inluding taking down existing old pipes, complete all as specified and directed by Engr-in-Charge. |
| 101 | Description all as per Ser item No 100.00 here-in-before but bore of pipe 75mm, complete all as specified and directed by Engr-in-Charge. |
| 102 | S & F 110mm bore PVC (SWR) pipes signle socketed, in any length with rubber ring joints, fixed in walls inluding taking down existing old pipes, complete all as specified and directed by Engr-in-Charge. |
| 103 | S & F 75mm bore PVC (SWR) pipes signle socketed, in any length with rubber ring joints, fixed in walls inluding taking down existing old pipes, complete all as specified and directed by Engr-in-Charge. |
| 104 | S&F for 110mm PVC (SWR) bends any radius, complete all as specified and directed by Engr-in-Charge. |
| 105 | S&F for 75mm PVC (SWR) bends any radius, complete all as specified and directed by Engr-in-Charge. |
| 106 | S&F for 75mm dia outlet PVC(SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed by Engr-in-Charge. |
| 107 | S & F in 15mm dia pillar taps, single lever basin without popup waste with 450mm long braided hoses, complete all as specified and directed by Engr-in-Charge. |
| 108 | Vitreous China urinals fixed in repairs, half stall (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushingcistern, trap and waste pipe, complete all as specified and directed by Engr-in-Charge. |
| 109 | Supply and fix in repairs Vitreous China wash basin with matching pedestal, white, flat back, size 550x400mm, including cutting for and pinning in ends of brackets or erecting stand but inclusive of fixing of supply waste pipe, complete all as specified and directed by Engr-in-Charge. |
| 110 | Taking down the existing aluminium door/window Ventilator frame with shutters exc.1.5 sqm each incl all accessories and making good the disturbed portion, complete all as specified and directed by Engr-in-Charge. |
| 111 | M&L for window/ventilator Powder coated (50 - 60micron) Glossy finish (of approved color) aluminium sliding window of any shade with frame of section 100mm x 45mm ,thickness of sheet 16 gauge , including sliding shutter (High-density Red Nylon or Stainless Steel Roller wheel of each shutter) & (EPDM gaskites fitted in slote of each Glazed window shutter for air lock) with shutter of section 32mm x 15mm (with and including Triple Track and 2 Nos Glazed Shutter and 01 No Gauzed Shutter) including Stainless Steel wire mesh, rubber gasket for securing the glass, 5.50 mm thick Tinted/frosted glass and necessary Aluminium moongreies and Designer/modern handles, locks, complete all as specified and directed by Engr-in-Charge. |
| 112 | M&L for Powder coated 50-60 micron (Gloss finish (of approved color) aluminium door frame/partition of any shade with shutter (EPDM gaskites fitted in slote of each door shutter for air lock) of section 100mmx 45mm, thickness of sheet 3mm , partly panelled shutter and partly glazed lock rail / bottom rail of shutter 100mm x 45mm, top rail 80mm x 45mm including necessary jointing cleats, anodized aluminium including necessary fittings and aluminium mongeries i.e. 200mm long two Nos aluminium handles, 02 No, 200mm long aluminium tower bolt in each leaf, rubber gasket for securing the glass and 3 Nos 100 mm long butt hinges with each including 5.50 mm thick tinted/frosted glass/12 mm thick Prelaminated Particle Board including mortice lock, hydraulic door closure/floor door spring to each shutter, complete all as specified and directed by Engr-in-Charge.Note :- hydraulic door closure/floor door spring measory and paid seperately. |
| 113 | Powder coated 50-60 micron (Gloss finish (of approved color) aluminium decoril (decorative safety grills) (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved aluminium Powder coated standard section around the opening, complete all as specified and directed by Engr-in-Charge. |
| 114 | S&F in repair Aluminium (Diecast) body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width & of weight between 61 to 80kg, complete all as specified and directed by Engr-in-Charge. |
| 115 | Hydraulic operated Floor door spring, size 256 x 105 x 50mm with adjustable latching and closing speed, mechanical hold open 90 degree, made out of high grade CI body housed in GI steel box with high corrosion resistant SS-304 coverplate, thermostable hydraulic fluid filled to ensure smooth operation in any climate, complete all as specified and directed by Engr-in-Charge. |
| 116 | Mild steel PVC powder coated (coloured) curtain rod with fixing side brackets, end cups, rings @ 10 Nos per running metre and fixed with PVC rawl plugs & steel screws as in repairs, complete all as specified and directed by Engr-in-Charge. |
| 117 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation board/slab/wall calading of any description including cover fillets and removal from the site, complete all as specified and directed by Engr-in-Charge. |
| 118 | Supply and fix powder coated Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurledweb of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, complete all as specified and directed by Engr-in-Charge. |
| 119 | Supply and fix hangers 6 mm dia GI (n.exc 1200 mm in length apart) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long, complete all as specified and directed by Engr-in-Charge. |
| 120 | Supply and fix interior decorative cavity/hollow PVC ceiling panels/planks of interlocking types, thickness exc 8mm and width n.exc 255mm with colour texture/shade as approved incl necessary trims where reqd fixed with hidden screws to GI seamless framework, complete all as specified and directed by Engr-in-Charge. |
| 121 | Material and labour as in repair for Non asbestos fibre cement building boards (E-board classic designer) fixed or laid/ inserted toGI framework with screws , complete all as specified and directed by Engr-in-Charge. |
| 122 | S&F 25mm thickness lnsulated PVC Wall Lining consisting of PVC Insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing as per specified in MES schedule part-II, complete all as specified and directed by Engr-in-Charge. |
| 123 | Description all as per item no 122.00 here-in-above but 25mm thickness PVC Insulated Panel with wood grain printed PVC sheet used instead of plain colour sheet.as per specifications and drawing as per specified in MES schedule part-II, complete all as specified and directed by Engr-in-Charge. |
| 124 | S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing as per specified in MES schedule part-II, complete all as specified and directed by Engr-in-Charge. |
| 125 | Supply and fixing factory made uPVC white/ivory colourThree track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi?chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & sizeaccording to uPVC profile), appropriate dimensionof uPVC extruded glazing beads and uPVC extrudedinterlocks, EPDM gasket, wool pile, zinc alloy (white/ivory powder coated 50 micron ) touch locks with hook, zinc alloy bodywith single nylon rollers (weight bearing capacity tobe 40 kg), G.I fasteners 100 x 8 mm size for fixingframe to finished wall and necessary stainless steelscrews etc. Profile of frame & sash shall be mitred cutand fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of wateretc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weatherproof silicon sealent over backer rod of required sizeand of approved quality, complete all as specified and directed by Engr-in-Charge.(Glass or wiremesh shall be paid separately) |
| 126 | Note for Ser Item No 125.00 For uPVC frame and sash extruded profilesminus 5% tolerance in dimension i.e. in depth widthof profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made, complete all as specified and directed by Engr-in-Charge. |
| 127 | Providing and fixing made uPVC white colour casement (sliding/Openable) Door (floor and necessary fitments reqd for floor spring, etc) made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame(60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of ardware.EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), Tprofile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x100mm long fasteners.Hardware: [casement door handle made of zinc alloyed (whitepowder coated).Corner striker. Secondary Strikers. Cylinder Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed(white powder coated) [and 5mm thick glazing with selected quality glass, complete all as specified and directed by Engr-in-charge. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose), complete all as specified and directed by Engr-in-Charge. |
| 128 | Supply and fixing factory made uPVC white colour fixed glazed ventilator made of (small series)frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame andn mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mildsteel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers,plastic aps and necessary stainless steel screws etc.Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixingframe the gap between frame and adjacent finishe dwall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note : For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. indepth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment on this accountshall be made, complete all as specified and directed by Engr-in-Charge. |
| 129 | M&L for repairing of RCC projections, chajjias, roofs, facia etc by necessary preparation. Scarpping, cutting, chiseling derusting and cleaning exposed reinforcement, surfaces of damaged, loose R.,C.C surfaces with cement concreat (1:1.5:3) using 12.5mm graded crushed stone aggrigates and reinforcement with welded mesh (If Reqd) of weight exc 2 kg per sqm but n.exc 3kg/sqm with or without facia and finished with cement and sand motar (1:3) using coarse sand and work in patches area n.exc 5 sqm each and thickness of R.C.C member n.exc 70mm including necessary form work and applying two coats of finishes to match with the existing surfaces in at any height, complete all as specified and directed by Engr-in-Charge. |
| 130 | Supply and fix Floor door stopper of aluminium alloy body and tongue, anodised, 140 mm with hard drawn steel spring, fixed in floor, complete all as specified and directed by Engr-in-Charge. |
| 131 | Supply and fix 25mm dia heavy duty stainless steel curtain rod (SS-304), cut in required length and size to fit with opening incl fixing in bracket with necessary screws fitted on bracket and decorative nobs on sides with necessary arrangement, complete all as specified and directed by Engr-in-Charge. |
| 132 | Supply and fix 125mm long curtain rod side brackets of stainless steel (SS 202), angular or cantilever type fixed to wall with 02 nos screws on each bracket and fitted screws for fixing curtain rod incl stainless steel (SS 202) decorative design plain metal colour nobs (oval/shere shape) with fixing arrangement for curtain rod using a screw, complete all as specified and directed by Engr-in-Charge. |
| 133 | Supply and fix 20 mm outer dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings, concealed joint with CPVC adhesive taflon tape complete to walls and ceilings or laid in floors including all connected brass CPVC fittings and cutting grooves, filled with CM 1:6 as in repair, complete all as specified and directed by Engr-in-Charge. |
| 134 | Cutting chases in brick wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified and directed by Engr-in-Charge. |
| 135 | Supply and fix 50 mm outer dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings, concealed joint with CPVC adhesive taflon tape in any requirement complete to walls and ceilings or laid in floors including all connected band/Elbow CPVC fittings and cutting grooves, filled with CM 1:6, complete all as specified and directed by Engr-in-Charge. |
| 136 | Supply and fix chromium plated Self-closing taps Pillar taps (suitable size for 20mm outer dia CPVC pipe), cast copper alloy, screwed down high pressure, with long screwed shanks and fly-nuts, complete all as specified and directed by Engr-in-Charge. |
| 137 | Hydraulic operated Floor door spring, size 256 x 105 x 50mm with adjustable latching and closing speed, mechanical hold open 90 degree, made out of high grade CI body housed in GI steel box with high corrosion resistant SS-304 coverplate, thermostable hydraulic fluid filled to ensure smooth operation in any climate, complete all as specified and directed by Engr-in-Charge |
| 138 | Supply and fix 12mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required, complete all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
| 139 | Supply and fix 12mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required, complete all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
