|
| 1 | Taking down chowkhat or frame (without taking off shutter from the frame), area of opening n'exc 1.5 Sqm each, removing from the site complete all as specified and directed.Note:- In order to facilitate the taking down of chowkhat or frame with holdfasts, the cost of cutting holes or dismantling of brick/stone/concrete masonry work of any description in Jambs of existing opening or removing any other fixing arrangement and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required so as to re-fix the holdfasts of new chowkhat or frame shall deemed included in quoted unit rates.(ii) Hold fast / fasteners shall be measured and paid separately in respective item hereunder. |
| 2 | Taking down chowkhat or frame (without taking off shutter from the frame), area of opening exc 1.5 sqm and n'exc 4.00 sqm each, removing from the site complete all as specified and directed.Note:- In order to facilitate the taking down of chowkhat or frame with holdfasts, the cost of cutting holes or dismantling of brick/stone/concrete masonry work of any description in Jambs of existing opening or removing any other fixing arrangement and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required so as to re-fix the holdfasts of new chowkhat or frame shall deemed included in quoted unit rates.(ii) Hold fast / fasteners shall be measured and paid separately in respective item hereunder |
| 3 | M&L for mild steel framed work such as grills gratings, sun shed cover fixed with nut bolts incl, cutting drilling holes etc., with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed baluster, walk ways, railings, framed work or water tanks and similar work conforming to Fe 290 Gde E 165 complete all as specified and directed. |
| 4 | S&F Solid PVC door frame of size 50mmX47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet (edges will be painted to match with prelam sheet) reinforced with MS square tube, supplying & fixing in opening as per specification.Note: The cost of fasteners (10mm dia, 100mm long, min 6 Nos.) shall be deemed included in quoted unit rates. |
| 5 | S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6mm raised panel design with 5 mm thick moulded PVC sheet on the front face & 5mm prelam PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed. |
| 6 | S & F UPVC ventilator with exhaust fan, for ventilation in toilet with (openable type window / Fixed glass as per requirement) of frosted glass with UPVC frame of approved colour, thickness 60 mm, Length 750mm and height 600 mm complete all as specified and directed by Engr-in-charge. |
| 7 | M&L for Providing and fixing factory made UPVC white colour Sliding window, Area of Net wall opening not exceeding 2.00 sqm each, Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated),steel roller system. and 5mm thick glazing with selected quality glass and gauging with Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories includes all other connected accessories complete all as specified and directed. |
| 8 | M&L for Providing and fixing factory made uPVC white colour casement (Openable) window, Area of Net wall opening not exceeding 2.00 sqm each, made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm),T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass.or stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm includes all other connected accessories complete all as specified and directed.. |
| 9 | S&F 105 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary lugs, hinges, lock strike plate etc, one shop coat of red oxide primer, filing PCC (1:3:6), type C-0 (using 12.5 mm graded store aggregate) in hollow portion of frame and two coat of synthetic enamel paint after preparation of primed surface complete all as specified and directed.Note: The cost of lugs, hinges, lock strike plate etc, shop coat, synthetic enamel paint and PCC filling work shall be deemed included in quoted unit rates. |
| 10 | S&F 125 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary lugs, hinges, lock strike plate etc , one shop coat of red oxide primer, filing PCC (1:3:6), type C-0 (using 12.5 mm graded store aggregate) in hollow portion of frame and two coat of synthetic enamel paint after preparation of primed surface complete all as specified and directed.Note: The cost of lugs, hinges, lock strike plate etc, shop coat, synthetic enamel paint and PCC filling work shall be deemed included in quoted unit rates. |
| 11 | M&L for 2nd class hardwood (Sal) as in scantlings, timber clean sawn, 40Sqcm and over in section, framed and fixed including two coats of synthetic enamel paint over a coat of pink primer (after preparation of surface) and dismantling existing scantlings of any description in any position complete all as specified and directed. |
| 12 | M&L for 30mm thick flush shutters , solid core construction, with block board core and plywood face panels, commercial type on both sides fixed to frame including applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.Note: The cost of synthetic enamel paint and primer work shall deemed included in quoted unit rates. |
| 13 | M&L for 2nd class HW (Teak) glazed and skeleton shutters ( factory made), 35 mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, cla-use 8.24 (a); for doors supplied and fitted to chowkhats including two coats of synthetic enamel paint over a coat of pink primer (after preparation of surfaces complete all as specified and directed.Note: (i) The cost of synthetic enamel paint and primer work shall deemed included in quoted unit rates.(ii) The glass and wire gauge shall be measured and paid separately under respective item here under. |
| 14 | S&F 150mm size extruded aluminium alloy handle, fabricated type, anodised complete all as specified and directed. |
| 15 | S&F 150mm long aluminium anodised barrel tower bolt , extruded section complete all as specified and directed. |
| 16 | S&F100mm long extruded aluminium alloy butt hinges with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed. |
| 17 | S&F 150 mm long door stopper made of aluminium alloy body and tongue, anodised fixed in door with stainless screws etc complete all as specified and directed. |
| 18 | S&F 150mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 19 | S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 20 | M&L for two coats of synthetic enamelled paint over a coat of red oxide including preparation of new steel surfaces of any description over 10 cm width or girth complete all as specified and directed. |
| 21 | S&F galvanised mild steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.45mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 22 | Taking down cement plaster on brick work or stone walls, etc incl raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 23 | M&L for 20mm thick cement plaster on brick / concrete/ stone surfaces in two coat (Ist coat 15mm thick in CM 1:6 and 2nd coat 5mm thick in CM 1:4 mixed with liquid WPC @ 200ml Per litre) complete all as specified and directed.Note:-WPC will be paid separately under respective item. |
| 24 | M&L for 15 mm thick rendering in cement mortar (1:6) on brick / concrete/ stone walls, surfaces finished even and fair without using extra cement, complete all as specified and directed. |
| 25 | M&L for 5 mm thick plastering in cement mortar (1:3) on ceiling, surfaces finished even and smooth without using extra cement including taking down of existing plaster of any description complete all as specified and directed. |
| 26 | M&L for two coats of cement base wall care putty in two coats @ 1Kg/Sqm (0.5Kg in each coat) on new plastered surface of wall/ceiling as preparatory work to painting including cleaning surface before application of putty and necessary rubbing of puttied surface with appropriate size of sand paper so as to make the surface truly smooth, free from all dirt/ dust and made ready to receive the finishing coat of paint complete all as specified and directed.Make : Birla white / JK putty/ Burger |
| 27 | M&L for complete removal of existing treatment and applying two coats of cement base wall care putty (approx thickness 1mm) on newly plastered surface of wall/ceiling as preparatory work to painting including brooming down with steel wire brushes scraping down moulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , cracks etc cleaning surface before application of putty and necessary rubbing of puttied surface with appropriate size of sand paper so as to make the surface truly smooth, free from all dirt/ dust and ready to receive the finishing coat of paint complete all as specified and directed.Make : Birla white / JK putty/ Burger |
| 28 | M&L for two coat of acrylic interior emulsion paint over and including one coat of interior primer on prepared surfaces of wall complete all as specified and directedMake : Asian(Apcolite)/ Burger(self breath easy)/ Nerolac(nerolac Impression HD)Note : (i) The emulsion used shall be of approved colour by GE diluted as per manufacturer's instructions(ii) Contractor shall ensure washing floors, cleaning glass , joinery , electric fitting, etc after painting work with entire satisfaction of Engg-in-charge. |
| 29 | M&L for two coats of acrylic exterior emulsion paint over and including one coat of exterior primer on prepared surfaces of wall complete all as specified and directed.Make : Asian(Appex Altima)/ Burger(weather coat all Guard)/ Nerolac(Excel total)Note : (i) The emulsion used shall be of approved colour by GE diluted as per manufacturer's instructions(ii) Contractor shall ensure washing floors, cleaning glass , joinery , electric fitting, etc after painting work with entire satisfaction of Engg-in-charge. |
| 30 | M&L for two coat of acrylic interior emulsion paint over and including one coat of interior primer on prepared surfaces of ceiling complete all as specified and directedMake : Asian(Apcolite)/ Burger(self breath easy)/ Nerolac(nerolac Impression HD)Note : (i) The emulsion used shall be of approved colour by GE diluted as per manufacturer's instructions(ii) Contractor shall ensure washing floors, cleaning glass , joinery , electric fitting, etc after painting work with entire satisfaction of Engg-in-charge. |
| 31 | M&L for two coat of white wash on old decorated surface of walls including preparation of old surface i.e brooming down with steel wire brushes scraping down moulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , cracks etc and washing floors, cleaning glass , joinery , electric fitting, etc complete all as specified and directed.Note : Contractor shall ensure washing floors, cleaning glass , joinery , electric fitting, etc after painting work with entire satisfaction of Engg-in-charge.. |
| 32 | M&L for providing and fixing stainless steel (Grade 304) railing (design and pattern as approved by Engineer -in- charge), made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement including dismantling existing railing of any discription, type and pattern complete all as specified and directed. |
| 33 | Demolition of brick work or stone/ boulder masonry work built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed. |
| 34 | M&L for Brickwork with old size sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in Cement mortar 1:6 complete all as specified and directed. |
| 35 | M&L for Brick work with old size sub class 'B' bricks, straight or curved on plan in half brick thick wall built in Cement mortar 1:4 complete all as specified and directed. |
| 36 | M&L for moorum/red bajri filling in floors or paving laid in layers n.exc 15cm thick spread levelled and rammed including watering complete all as specified and directed. |
| 37 | S&F in repair 25mm dia stainless steel (202 Grade) curtain rod not less than 0.70mm thick with end caps (Latoo) and brackets complete all as specified and directed.Note : In openings exceeding 1.2m wide, additional brackets shall be provided so as the distance between two consecutive brackets shall not exceed 1.2m. |
| 38 | M&L for GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down existing tubing of any description complete all as specified and directedNote : Cutting chases and making good shall be measured and paid separately under respective item here-in-after. |
| 39 | M&L for 20 mm outer dia CPVC pipes, SDR 11 grade including fittings on walls/ceiling or laying in floors including taking down existing tubing of any description complete all as specified and directed.Note : Cutting chases and making good shall be measured and paid separately under respective item here-in-after. |
| 40 | M&L for GI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down existing tubing of any description complete all as specified and directedNote : Cutting chases and making good shall be measured and paid separately under respective item here-in-after. |
| 41 | M&L for cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, in cement mortar 1:3 cutting not exceeding 10cm in girth complete all as specified and directed. |
| 42 | S&F in repair 110mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed. |
| 43 | S&F in repair 75 mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed. |
| 44 | S&F in repair 75 mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 45 | S&F 110mm dia PVC(SWR) bends any radius complete all as specified and directed. |
| 46 | S&F 75 mm dia PVC(SWR) bends any radius complete all as specified and directed. |
| 47 | S&F 110mm dia PVC(SWR) junction, single (single T/Y ) equal or unequal any radius , with access door, complete all as specified and directed. |
| 48 | S&F 75 mm dia PVC(SWR) junction, single (single T/Y ) equal or unequal any radious. with access door, complete all as specified and directed. |
| 49 | S&F in repair 110mm dia PVC(SWR) vent cowl, complete all as specified and directed. |
| 50 | S&F in repair 75 mm dia PVC (SWR) floor trap, plain with CP grating including jointing with solvent cement complete all as specified and directed. |
| 51 | Providing and fixing 15mm C.P. brass Angular Stop Cock with Wall Flange make of Jaquar cat no OPP-CHR-15053PM or Grohe cat no. 26 021 000 or Kohler cat no. K-25431IN-4-CP or Grohe cat no. 22005000 With wall flange etc complete for mixer and geyser points as directed by Engineer-in-charge (Contractor Shall Provide 10 year Warrantee certificate and Manufacturer's Test Certificate including copy of invoice of each item). |
| 52 | S&F in repairs 15 mm dia brass chromium plated long body Bib tap fancy type with capstan head screwed down for iron pipe complete in all respect as specified. Make : Hindware /Kohler /Jaguar |
| 53 | Providing and fixing 15mm C.P. brass Bib Cock Make of Jaquar cat no. OPP-CHR-15037PM or Ghrohe cat no. 20 238 000 or Kohler cat no. K - 37319IN-4-CP With wall flange Complete as per direction of Engineer-in-charge (Contractor Shall Provide 10 year Warrantee certificate and Manufacturer's Test Certificate including copy of invoice of each item). |
| 54 | Providing and fixing Overhead Shower 200mm Round Shape Single Flow (Body & Face Plate Stainless Steel) with Rubit cleaning system make of Jaquar cat no. OHS-CHR-1613 or Kohler cat no. K-75924IN-CP or Grohe cat no. 27591001 etc Complete as per direction of Engineer-in-charge (Contractor Shall be Provide 10 year Warrantee certificat and MTC of each item). |
| 55 | Providing and fixing C.P. brass Single Lever Basin Mixer without Popup Waste with 450mm Long Braided Hoses Make of Jaquar Cat No. OPP-CHR-15011BPM or Kohler cat no. K-27477IN-4ND-CP or Grohe cat no. 24282001 with including cutting and making good the walls wherever required complete as directed by Engineer-in-Charge (Contractor Shall Provide 10 year Warrantee certificate and Manufacturer's Test Certificate including copy of invoice of each item). |
| 56 | Providing and fixing C.P. brass Sink Mixer with Regular Swinging Spout (Wall Mounted Model) with Connecting Legs & Wall Flanges make of Jaquar Cat. No. FLP-CHR-5309PM or Kohler cat no. K-20591IN-4-CP or Grohe cat no. 32752000 for Sink complete as directed by Engineer-in-Charge (Contractor Shall Provide 10 year Warrantee certificate and Manufacturer's Test Certificate including copy of invoice of each item). |
| 57 | S&F in repair 32 mm bore dia Bottle Trap Size with 300 mm & 190 mm Long wall connection pipes & wall flange with colour : Blush Gold PVD (Colour Rose Gold) incl required concealed pipe upto trap with required accessories complete in all respect as specified and directed by Engr-in-Charge. Make : Jaquar Code: ALD-BGP-769L300X190 / Cera Code : F4065103RG / Kohler Code : K-7314IN-RGD |
| 58 | Providing and fixing CP brass Single Lever High Flow Diverter consisting concealed body, Exposed part kit and bath spout Make of Jaquar cat no. OPP-CHR-15079NKPM, ALD-079N and SPJ-15429PM or Kohler cat no. K-77310IN-4FP-CP , Body cat no. K-99924IN-CP Grohe cat no. 2919001 , Body cat no.33963000 and Spout K-99061IN-CP or Ghrohe cat No. 29 039 000 , body cat no. and spout cat no. 13258000 etc complete as per direction Engineer-in-Charge (Contractor Shall Provide 10 year Warranteecertificate and Manufacturer's Test Certificate including copy of invoice of each item). |
| 59 | Providing and fixing C.P. brass Double Coat Hook Jaquar Cat. No. ACN-CHR-1161N. or Kohler cat no. K-25073IN-CP or Grohe cat no. 4046100 for complete as directed by Engineer-in-Charge (Contractor Shall Provide 10 year Warrantee certificate and Manufacturer's Test Certificate including copy of invoice of each item). |
| 60 | Providing and fixing CP Brass Soap Dish Holder Make of Jaquar Cat No.ACN-CHR-1131N or Kohler cat no. K-25068IN-CP or Grohe cat no. 40368001 complete as per direction of Engineer-in-charge (Contractor Shall Provide 10 year Warrantee certificate and Manufacturer's Test Certificate including copy of invoice of each item). |
| 61 | Supply and fixed in repairs 600 mm long C P finish CP Towel Rail D type complete in all respect as specified and directed by Engr-in-Charge. Make : Hindware /Kohler /Jaguar |
| 62 | Providing and fixing Single Towel Rail 600mm Long, Stainless Steel make of Jaquar Cat. No. ACN-CHR-1111SM or Kohle cat no. K-25065IN-CP or Grohe cat no. 40459001 etc complete as per direction Engineer-in-Charge (Contractor Shall Provide 10 year Warrantee certificate and Manufacturer's Test Certificate including copy of invoice of each item). |
| 63 | Providing and fixing Towel Rack 600mm Long without Lower Hangers but with 3 hooks, Stainless Steel. Make of Jaquar Cat No. ACN-CHR-1181FHS or Kohler cat no. K-17529T-CP complete as per direction of Engineer-in-charge (Contractor Shall Provide 10 year Warrantee certificate and Manufacturer's Test Certificate including copy of invoice of each item). |
| 64 | S&F Stainless Steel Peg Set of 6 hooks ISI marked medium weight including taking down existing mixer / pillar tap of any description complete all as specified and directed.Make : Pryag Cat No. BEA-30 or equavalent |
| 65 | S&F in repair 15mm dia PVC connection with PTMT nuts of length 450 mm, complete all as specified and directed.Make : Prince/Apollo/ Pryag |
| 66 | S&F rotational moulded poly-ethylene water storage tanks (cylindrical vertical with closed top), 500 litres capacity, triple layer in construction white in colour hoisted and fixed in position including 20mm PTMT float valve assembly including accessories and dismantling of old tank ( any description and capacity) complete all as specified and directed.Make : Sintex / Supreme(Siltank) / Plasto |
| 67 | S&F rotational moulded poly-ethylene water storage tanks (cylindrical vertical with closed top),1000 litres capacity, triple layer in construction white in colour hoisted and fixed in position including 20mm PTMT float valve assembly including accessories and dismantling of old tank ( any description and capacity) complete all as specified and directed.Make : Sintex / Supreme(Siltank) / Plasto |
| 68 | S&F in repair 50 mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed. |
| 69 | S&F in repair gun metal globe /valve with iron wheel head screwed both ends for iron pipe of 20mm bore, complete all as specified and directed.Make : Zoloto/Leader Atam/VIR |
| 70 | S&F kitchen sinks with drainage board, made out of 304 grade 0.8mm/1.0mm thick stainless steel sheet with ;plugs, washers, and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, and connecting union to pipe including taking down existing sink of any description complete all as specified and directed.Make : Nirali (Popular range-SMALL-glossy finish) /Cera(Cat part No B4512122-glossy finish)/Johnson (Cat part No K030206SBG) |
| 71 | S&F Stainless steel Plate Rack, 900mmx600mmx250mm in size, made of 1mm thick 202 grade stainless steel sheet including taking down existing Plate rack ( any description) complete all as specified and directed. |
| 72 | S&F purposely moulded looking mirror 5mm thick glass fixed with studs complete all as specified and directed.Make : Saint-Goblin/Modi Guard/Asahi India (AIS) |
| 73 | Providing and fixing C.P. brass Swivel Mirror 630 X 445mm Jaquar Cat. No. AKP-CHR-35795. or Kohler cat no. K-10877IN-4-CP or Grohe cat no. 31 288 000 for Sink complete as directed by Engineer-in-Charge (Contractor Shall Provide 10 year Warrantee certificate and Manufacturer's Test Certificate including copy of invoice of each item). Please Enable Macros to View BoQ information |
| 74 | Providing and fixing C.P. brass Swivel Mirror 630 X 445mm Jaquar Cat. No. AKP-CHR-35795. or Kohler cat no. K-10877IN-4-CP or Grohe cat no. 31 288 000 for Sink complete as directed by Engineer-in-Charge (Contractor Shall Provide 10 year Warrantee certificate and Manufacturer's Test Certificate including copy of invoice of each item). Please Enable Macros to View BoQ information |
