|
| 1 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: |
| 2 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 3 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : |
| 4 | 300x16 mm |
| 5 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 6 | 300x10 mm |
| 7 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 8 | 125 mm |
| 9 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 10 | Twin rubber stopper |
| 11 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. |
| 12 | 1.0 mm thick |
| 13 | Providing and laying Vitrified tiles in diferent sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). |
| 14 | Size of Tile 600x600 mm |
| 15 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. |
| 16 | Size of Tile 600x600 mm |
| 17 | Providing and laying Vitrified tiles in floor with diferent sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). |
| 18 | Size of Tile 600x600 mm |
| 19 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead and disposal of malba to the dumping ground notified by MCD Delhi within any lead : |
| 20 | Of area 3 sq. metres and below |
| 21 | Dismantling tile work in floors and roofs laid in cement mortar including stacking serviceable material within 50 metres lead and disposal of malba to the dumping ground notified by MCD Delhi within any lead. |
| 22 | For thickness of tiles 10 mm to 25 mm |
| 23 | Providing and fixing multi-walled thermo clear glass look type 10 mm thick clear of required colour blue, brown or green etc. polycarbonate multi walled sheet of required brand such as LEXAN/ Polygal/ DANPALON or approved by Engineer-in-charge. The multi walled polycarbonate sheet shall be fixed on tubular steel structure with 25 micron thick powder coated aluminium alcox section of size 60x18x2 mm and weight not less than 0.462 kg/m and weather proof Neoprene EPDM rubber gasket on both side of joints and top. So as to make the hole structure water tight as per approved desigh/drawings. The alcox aluminium section shall be fixed on joints and both ends of polycarbonate sheet to fix the sheet rigidly on steel framed structure.The weather proof Neoprene and aluminium profile shall be fixed and scapled with silicon scalene to make the joints fully water proof. The open overhead end of polycarbonate sheet to be shield with powder coated aluminium channel of size 10x10x1.5 mm thick and weight not less than 0.20 kg/m. The polycarbonate sheet and profile shall be fixed with self taping and self drilling 50 mm long steel screws fixed not less than 150 mm centre to centre. |
| 24 | The rate shall be inclusive of cost of all materials involved such as polycarbonate sheet, Alcox system aluminium profile aluminium channel, EPDM gasket, self taping screws, nuts, bolts, Silicon sealent or any other material required for fixing the sheet but excluding the cost of steel structure which shall be paid separately. Hoisting in position etc. complete as per direction of Engineer-in-charge. The rate shall also include the cost of all T&P, scaffolding and safety precautions required during execution of work. All aluminium sections have minimum powed coated of thickness not less than 25 micron. The work shall be completed in all respect as per design/drawings and direction of Engineer-in-charge. The finished curved surface area of polycarbonate sheet end to end of roofing fixed over steel tubular structure shall be measured in sqm for the purpose of the payment. |
| 25 | Credit to the work for dismantled material received during execution of work at site. (a) Unserviceable flush/PVC/Wooden door shutters.Note: Actual quantity of the material to be measured for payment. Please Enable Macros to View BoQ information |