|
| 1 | Taking down chowkats with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and n.exc 4 Sqm each and offered as credit. |
| 2 | All as per item No 1 here in before but n exc 1.5 Sqm EACH |
| 3 | Taking down shutters of any description area exc 1.00 Sqm and n exc 2 Sqm Each |
| 4 | Taking down shutters of any description or type area exc 1.00 Sqm and n.exc 2 sqm and refixing in same opening after necessary repairs |
| 5 | Taking down shutters of any description or type area n.exc 1.00 Sqm and refixing in same opening after necessary repairs |
| 6 | M&L for cutting holes in brick wall built in cement mortor or cement lime mortor and stone walls built in lime mortor exc half brick but not exc one brick ( Depth of embedded portion of holdfasts or lugs measured from face of jamb in to the wall) all as specified |
| 7 | S&F second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints |
| 8 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile mensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 9 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile mensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 10 | S&F for Providing and fixing factory made single extruded WPC (Wood Polymer omposite) solid decorative type flush door shutter of size 30mm thick comprising of irgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal trength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 11 | S&F second class hard wood 35 mm flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides |
| 12 | S&F second class hard wood 30mm thick, glazed and skeleton shutters open rebated and prepared to receive glass or gauge etc divided into squares with plain chamfered or rounded and rebated sash bars any numbers. |
| 13 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with wooden beading or with nuts and bolts to existing steel windows/wooden windows |
| 14 | S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with wooden beading or with nuts and bolts to existing steel windows/wooden windows |
| 15 | S&F Mild steel work like flat iron etc for hold fasts stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay),conforming to Fe 290 GDE E-165 |
| 16 | Preparing surface of wood & wood based materials, steel & iron work, new or old, of any description & grith, not otherwise described & treated with tar or coal tar black paint treating treating ends of posts, backs of Chowkats, etc., area tarred exc 0.1 sq.m but n exc 0.5 sq.m. each |
| 17 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube,design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face supplying & fixing in opening including making good to the jambs as per specification all as directed.Note: The quote rate shall be inclusive of following:-(i) Existing/new wall edges shall be finished properly in cement plaster in CM 1:4 including supply and fixing of 6 Nos wooden plugs for catch door frame size not exc 17 sqcm average sectional area and 100mm long. (ii) Frame shall be fixed to the wooden plugs inserted in wall using 6 Nos of 100mm long MS Screw, 3 each on either side |
| 18 | S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 19 | S&F Powder coated aluminums frame for doors,sliding windows, ventilators and with one or more rebates including joining cleat and handles and other necessary fittings for fixing etc. complete all as specified and directed. |
| 20 | S & F Powder coated Aluminium doors, window and ventilators shutters, without sash bar, aluminum section weighting 0.55kg / m including necessary joining cleats, glazing clips, rubber packing, anodized aluminum snap beading, screws etc complete all as specified and directed. |
| 21 | S&F framed work such as grills, gratings, etc, with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, frame work of water tanks and similar work confirming to Fe-290 Gde E-165 incl dismantling |
| 22 | S&F Stainless Steel Butt hinges,100mm medium weight and fixed |
| 23 | S&F Stainless Steel Butt hinges, 75mm medium weight and fixed |
| 24 | S&F 100mm Butt hinges, extruded Aluminum alloy with galvanised mild steel hinge pin,anodised and fixed, type C-21 |
| 25 | S&F extruded aluminum alloy handles,150mm fabricated type anodized |
| 26 | S&F extruded aluminium alloy handles,100mm fabricated type anodized |
| 27 | S&F Alluminium, 150mm anodized, barrel tower bolts extruded section & fixed |
| 28 | S&F Alluminium, 100mm anodized, barrel tower bolts extruded section & fixed |
| 29 | S&F Aluminium alloy, anodized, 250mm sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section or cast aluminium alloy & fixed |
| 30 | S&F mild steel 300mm long ordinary rat tail rod pattern springs including roller and roller plate complete. |
| 31 | S&F 150mm Floor door stopper of aluminum alloy body & single legged with hard drawn steel spring, fixed in door shutters. |
| 32 | M&L preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10cm width or girth applying two coats synthetic enamel paint over one coat of prink primer |
| 33 | Hacking out broken glass any thickness, size, quality, from wooden frame/steel frames fixed with putty or with wooden beads. |
| 34 | S&F 4mm thick sheet glass, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m or in aluminium glazing clips in each pane |
| 35 | S&F 4 mm thick Figured glass, pin headtype and glazing with oil putty in squares n exc 0.5 sq. m or in aluminium glazing clips in each pane |
| 36 | S&F in repairs Door closer hydraulically regulated (Aluminium extruded section body), designation No. 2 universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60kg and fixed |
| 37 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs/blankets, any thickness, including cover fillets |
| 38 | S & F 4mm thick high pressure steam cured (HPSC) pre primed self designer textured non asbestos fibre cement building board laid/ inserted to aluminium frame work in false celings including aluminium anodised snap grid frame work of size 605 x 605mm with hangers 6 mm dia. G.I. (up to 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long etc., complete all as specified and as directed. |
| 39 | S&F in repair 4mm thick designed non asbestos fibre cement building boards of size 600mm x 600mm fixed or laid/inserted in aluminium grid false ceiling complete all as specified. insert existing frame work without disturbing the other false ceiling and making good existing frame with all as specified and directed by Engr-in-Charge. |
| 40 | S&F in repairs Aluminium anodised tubular curtain rod 20mm dia with brackets. |
| 41 | M&L for 2nd class hard wood Plain fillets square, rectangular or triangular in section, exc 13 & n.exc 25 Sqcm clean sawn, secured with nails or brads. |
| 42 | S&F in repairs Prelaminated particle boardof thickness 18/19 mm thick, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work. |
| 43 | M&L 6mm thick teak wood lipping for external of 18/19 thickness of board |
| 44 | S & F 30mm Continuous (piano) hinges, mild steel, bright finish or electrogalvanised |
| 45 | S&F 100mm Hasp & staple, safety type, alluminium with mild steel hinges pin including bolt to hinges plate & fixed with screw |
| 46 | M&L Cutting chases, pinning in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth |
| 47 | Supplying and laying of CPVC pipes SDR 11& plain CPVC SDR 11 fittings on walls/ceiling or laying in floors of outer dia 20mmm complete complete including taking down old pipes all as specified as as specified |
| 48 | Supplying and laying of CPVC pipes SDR 11& plain CPVC SDR 11 fittings on walls/ceiling or laying in floors of outer dia 25mm complete complete including taking down old pipes all as specified as as specified |
| 49 | Supplying and laying of brass elbow of CPVC pipe outer diamter of 20 mm |
| 50 | Supplying and laying of brass Tee of CPVC pipe outer diamter of 20 mm |
| 51 | Supplying and laying of brass elbow of CPVC pipe outer diamter of 25mm |
| 52 | Supplying and laying of brass Tee of CPVC pipe outer diamter of 25 mm |
| 53 | M&L taking up or down steel tubing and connections, including cleaning for refixing of GI water tubing of 15mm boreall as specified and directed |
| 54 | M&L taking up or down steel tubing and connections, including cleaning for refixing of GI water tubing of 20mm boreall as specified and directed |
| 55 | S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450mm all as directed |
| 56 | S&F for grating doom 100mm dia of PTMT minimum weight 25 gms |
| 57 | S&F in repairs for 40mm dia PVC waste pipe 450mm long for sink/wash hand basin |
| 58 | S&F in repairs vitreous China squatting pan ‘Orissa’ pattern, size 580 x 440 mm white, integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor . |
| 59 | S&F in repair Vitreous China wash down water closet (pedestal pattern), white (excluding flushing cistern and flush pipe) incl Pedestal pan and trap, connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, seat cover etc, complete all as directed |
| 60 | S&F in repairs vitreous China wash basin, white, flat back, size 550x400mm incl 32mm waste fittings, brass, chromium plated for glazed ware basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed |
| 61 | S&F in repairs 10 liters capacity PVC low level flushing cistern complete with ISI marked body and ISI marked syphon (Make shall be Parryware Slimline or equivalent) |
| 62 | S&F in repairs 15mm fancy type chromium plated angle cock with flange, screwed down, high pressure, with crutch handle, screwed both ends for iron pipe or for unions and fixed |
| 63 | S&F in repairs bib cock long body with flange, fancy type chromium plated, screwed down, screwed for iron pipe, 15 mm bore or for brass ferrule and fixed all as specified |
| 64 | S&F in repairs pillar cock, fancy type chromium plated, screwed down, high pressure, with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly nuts, screwed for 15 mm bore |
| 65 | S&F in repairs CP wall mixer with for mixing hot & cold water screwed down for iron pipe & fixed with provn for connection to over head shower with bend pipe |
| 66 | S&F in repairs Bath room PVC cabinet mirror of size 350mm x 450mm (Make : prayag Cat part No 551 or equivalent in Hindware/ Cera) |
| 67 | S&F in repairs bevelled edge mirror of size 600X450mm of selected quality glass mounted on 6mm thick AC building boards or on commercial plywood with aluminium beading alround and fixed to wooden plugs with CP brass screws, fixed in repairs. |
| 68 | S& F in repairs towel rail 600 mm long of PTMT fixed with and including chromiumplated brass screws and plastic cleats.(Minimm weight 190 gms) |
| 69 | S&F in repairs chromium plated 125mm shower roses with or without swivel joints, any size, including fixing to steel pipe or union |
| 70 | S&F in repairs sinks with drainage board made of stainless steel 0.8mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460 mm bowl size 410 mm x 330 mm x 160 mm |
| 71 | S&F in repairs Bib cock two way double Handle with flange, fancy type chromium plated,screwed down,screwed for iron pipe, 15mm bore for brass ferrule and fixed all as specified Make:- (Prayag- Cat Part No 8312 Or Equivalent) |
| 72 | S&F in repairs kitchen plate rack made out of stainless steel 0.8mm thick complete of size not less than 900x750x200mm, duly assembled and fixed to wall with wall screws / fasterners all as specified and directed. |
| 73 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 74 | S&F in repairs stainless steel Soap Dish |
| 75 | S&F in repairs Plastic water closet seat, white, closed pattern with flat bottom, and cover and MS CP or aluminium hinging device. |
| 76 | S&F in repairs 75mm PVC (SWR) floor trap, plain with grating incl jointing with solvent cement etc. complete. |
| 77 | S&F in repairs PVC (SWR) pipes single socketed 75mm bore, in any length with rubber ring joints laid in trenches/floors or walls all as specified. |
| 78 | S&F in repairs PVC (SWR) bends 75mm bore |
| 79 | S&F in repairs PVC (SWR) bends with access door 75mm bore |
| 80 | S&F in repairs 75 mm PVC (SWR) branch piece, single (single Y) equal or unequal with acces door |
| 81 | S&F in repairs PVC SWR vent cowl 75mm bore |
| 82 | S&F in repairs PVC (SWR) pipes single socketed 110mm bore, in any length with rubber ring joints laid in trenches/floors or walls all as specified. |
| 83 | S&F in repairs PVC (SWR) bends 110mm bore |
| 84 | S&F in repairs PVC (SWR) bends with access door 110mm bore |
| 85 | S&F in repairs 110mm PVC (SWR) junction single (single T) equal or unequal with acces door. |
| 86 | S&F in repairs PVC SWR vent cowl 110mm bore |
| 87 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 88 | M&L non skid coloured ceramic tiles each tile area (sqr/rectangle) exc 0.06Sqm but not exceeding 0.11Sqm tile thickness 7 to 8 mm, in floors etc set and joined in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer in CM 1:6 for floor finishing complete all as specified and as directed. |
| 89 | M&L coloured vitrified ceramic tiles 10mm thick light shade (square/rectangular) polished, area of each tiles n exc 0.36 SQM, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer in CM 1:6 for floor finishing complete all as specified and as directed. |
| 90 | Material and labour for ceramic coloured tiles, Non skid, area of each tile exc 0.18sqm and not exc 0.38sqm (square / rectangle) 7 to 8mm thick mm thick, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer in CM 1:6 for floor finishing complete all as specified and as directed. |
| 91 | M&L for Vitrified coloured ceramic tile in vertical surfaces dado/skirting including CM 1:3, 10mm thick backing coat. |
| 92 | M&L for non skid coloured ceramic tile in vertical surfaces dado/skirting including CM 1:3, 10mm thick backing coat. |
| 93 | M&L for glazed coloured ceramic tiles in vertical surfaces 350x250x7/450X350X7 mm thick etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match incl 10mm thick backing coat CM 1:3 dado/skirting |
| 94 | Excavation in post holes (or similar holes) each n.exc 0.5 Cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, layers n.exc 25 cm watering and removing surplus soil to a distance n.exc 50 m and making good disturbed ground as in hard/dense soil. |
| 95 | Material and labour P.C.C 1:3:6 type C2 (40mm graded aggregate) foundations, filling and mass concrete all as specified. |
| 96 | Dismantling wrought iron or mild steel work of any description not otherwiseprovided for |
| 97 | M&L mild steel work as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe-410- W(Gde-E-250) quality- B |
| 98 | Dismantling of (corrugated, semi-corrugated, etc) steel sheeting in roof coverings. |
| 99 | S&F pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 100 | S&F pre painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 101 | M&L preparing surfaces of new steel iron work exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed by Engr-in-Charge. |
| 102 | Demolition of existing roof treatment of any description completely and brushing the cleaned surfaces of concrete with neat cement slurry @ 3Kgs of cement per sq.m.complete all as specified and as directed. remove all the debris from site and rubbish off the premises complete |
| 103 | M&L for PCC 1:2:4 type B0 using 12.50 mm graded stone aggregate over the roof slab 25mm thick, finished even and fair without using extra cement all as specied and directed. |
| 104 | M&L for 10mm thick cement plaster in CM 1:3, mixed with water proofing compound over the levelling course while the concrete is green, finished even and smooth without using extra cement all as directed.”Note : WPC shall be measured and paid separately. |
| 105 | Supply only water proofing compound |
| 106 | M&L for APP Modified prefabricated five layer water proofing membrane, not less than 3 mm thick and weighing not less than 3.80 kg/SQM reinforced with non woven polyester matt black finished over compatible primer @ 0.3 Ltrs per SQM, and a bonding bitumen of VG-10 at 1.20 kg/SQM torching the membrane on whole surface uniformly while unrolling the membrane by LPG and sealed with trowel after necessary preparation of surface complete all as per manufactures instructions and finally finished with a coat of bit mastic aluminum paint @ 0.10 litre/SQM over APP membarene a coat of blown bitumen 85/25 grade @ 1.20Kg/SQM over the bitumen primer. The Overlap joint shall be provided of 75mm in longitudinal direction and 100mm in transverse direction respectively. All the angles, abutments and the drainage outlets shall be sealed with extra care to ensure full bondage including preparatory work and dismantling existing water proofing treatment.Note: The work shall be carried out by authorized applicators of manufacturers |
| 107 | S&F in repairs 15mm fancy type chromium plated with long shank and cup concealed type angle cock with flange, screwed down, high pressure, with crutch handle, screwed both ends for iron pipe or for unions and fixed |
| 108 | S&F rotational moulded polyethylene water storage tanks 500 liters capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I. Incl 25mm Nipple suitable for HDPE water tank. (minimum weight 20mm-45gms, complete all as specified including dismantiling old tank. |
| 109 | S&F rotational moulded polyethylene water storage tanks 1000 liters capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I. Incl 25mm Nipple suitable for HDPE water tank. (minimum weight 20mm-45gms complete all as specified including dismantiling old tank. |
| 110 | S&F in repairs 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe & fixed.(Minimum weight 20mm-210gms. |
| 111 | S&F in repairs 25 mm bore of Gun metal globe or gate, valves with iron screwed both ends for iron pipe and fixed |
| 112 | S&F in repair Vitreous China Urinal, Half stall type size (345x320x560) coloured/white complete fixing with suitable fixing arrangements to wall with and including domed 32mm dia waste coupling and waste pipe complete, all as directed. |
| 113 | Dismantling of stone slabs and tiles laid bedded in any mortar of any description or thickness in floors, aprons etc. |
| 114 | M&L 20-25 mm thick machine cut Kota stone slab flooring over cement screed bed 15mm thick in CM 1:6 and jointed with grey cement slurry mix with pigment to match the shade of slab including rubbing and polishing complete all as directed by Engr-in-Charge. |
| 115 | M&L 20-25 mm thick machine cut Kota stone sin riser of steps, skirting, dado, and pillar laid over cement mortar 10 mm thick 1:4 and jointed with with gray cement slurry mix with pigment to match the shade of slab including rubbing and polishing complete all as directed by Engr-in-Charge. |
| 116 | M&L for machine cut cudappah stone slab 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixednwith pigment to match the shade of the slab including rubbing and polishing complete |
| 117 | M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite |
| 118 | M&L for 20 mm thick screed bed or bedding layer of mortar 20 mm thick in CM 1:3 for laying floor finishes |
| 119 | Taking down cement plaster on brick walls or stone walls etc including raking out joint, hacking for key, scrubbing down with water etc including removing debries directed for a distance max upto 500m complete all as specified. |
| 120 | M&L for rendering 15 mm thick in CM 1:6 on fair faces of brick/concrete surfaces , finished even and smooth without smoothing extra cement complete all as specified and directed. |
| 121 | M&L for rendering 15 mm thick of brick work or concrete surfaces in CM 1:4 (Water proofing compund paid separtately) finished even and fair surfaces without using extra cement, complete all as specified and directed by Engr-in-Charge. (WPC paid and measured seprately) |
| 122 | M&L using rendering 5 mm thick CM 1:3 on ceiling or concrete surfaces, finished even and smooth without using extra cement complete all as specified. |
| 123 | Supply only liquid water proofing compound mix cement concrete/ cement plaster as per manufacture instruction all as directed by Engr-in-Charge. Make : DR. FIXIT PIDE PROOF LW, FOSROC |
| 124 | M&L preparing newly plastered surfaces of ceilings and applying three coat of white wash. |
| 125 | M&L preparing newly plastered surfaces of walls and applying two coats of Oil bound distemper on untreated plastered surfaces of walls over a coat of wall putty and primer including necessary preparation of surfaces all as specified and as directed. |
| 126 | M&L preparing newly plastered surfaces of walls and applying two coats of exterior grade weather proof paint on untreated plastered surfaces of walls over a coat of primer including necessary preparation of surfaces all as specified and as directed |
| 127 | S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing in SSR Pt- II incl dismantling |
| 128 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing in SSR Pt-II |
| 129 | M&L for old size bricks Brickwork with flyash bricks, straight or curved in plan exc 6m mean radius, built in CM 1:6 including demolition of brick work built in cement mortar |
| 130 | Taking down existing mild steel rolling shutters for and including replacing the slates, bottom lock plates, helical springs, side guides, sponge rubber gaskets, hood cover and side bracket etc wherever required and refixing in its original position after repairs including material and labour for greasing and mechanical old and new parts of rolling shutters complete all as per directed for shutters of area n. exc 10 sqm each, complete all as specified and directed. |
| 131 | All per Item No.130 here-in-before but area of shutters exc 10 sqm and n.exc 20 sqm eachNote for Srl Item No. 130 & 131(i) Spare parts for Srl item No.130 & 131 will be measured and paid separatly under relavent items and Rate quoted shall include for scaffolding to any height, covering etc, complete all as specified and directed by Engineer-in-charge |
| 132 | S&F factory fabricated mild steel (hardened) helical wire spring of size 300mm long, 80mm dia to match with existing complete all as specified and directed. |
| 133 | S&F factory fabricated mild steel (hardened) helical wire spring of size 450mm long, 80mm dia to match with existing complete all as specified and directed. |
| 134 | S&F factory fabricated new guide of rolling shutter made out of 1.25mm thick mild steel sheet of grade Fe-310 or Fe-410 of required length to match the existing one and including one shop coat of red oxide primer complete all as specified and directed. |
| 135 | S&F factory fabricated side brackets made out of 1.25mm thick mild steel of grade Fe-410 or Fe-310-0 to match with existing including one shop coat of red oxide primer complete all as specified and as directed |
| 136 | S&F factory fabricated new mild steel plates of 1mm thick of grade Fe-410-0 or Fe-310-0 to match with existing fitted with locking clips, riveted to slates including one shop of red oxide primer complete all as specified and as directed |
| 137 | S&F factory fabricated mild steel of grade Fe-410-0 or Fe-310-0 2.5mm thick bottom lock plate riveted and made of mild steel sheet of 1mm and welded with and including provision of standard locking arrangement welded to and including mild steel angle iron complete to match with existing with and including one shop coat of red oxide primer complete all as specified and as directed |
| 138 | S&F factory fabricated hood cover of mild steel 1mm thick hexagonal, square or circular shape fitted to existing angle iron stiffness at bottom edge and to bracket plate all as directed and applying one shop coat of red oxide primer complete all as specified and directed. |
| 139 | S&F mild steel pressed beval handles 150mm long, oval type, enamelled black for rolling shutters all as specified and as directed. |
| 140 | S&F mild steel safety lever lock with 4 levers for rolling shutters all as specified and as directed. |
| 141 | M&L in repair for Opening of rolling shutter hood cover, greasing to gears, helical spring and guide channels and refixing all accessories back in position of area n.exc 10sqm each complete all as secified and as directed. |
| 142 | M&L in repair for Opening of rolling shutter hood cover, greasing to gears, helical spring and guide channels and refixing all accessories back in position of area exc 10sqm and n.exc 20sqm each complete all as specified and as directed. |
| 143 | M&L for preparing new or previously untreated steel surface of any decription over 10cm in width or girth and applying two coats of aluminium paint over one coat of aluminium red oxide primer complete all as specified and directed. |
| 144 | M&L for cutting down plants/trees of upto 10cm girth and applying ROUNDUP/ GLYPOCET or equivalent (Herbal medicine) to roots of roof tops/sides, external walls of bldg chajjas, wall junctions, at junctions of rain water/CI waste water pipe junction including taking out possible quantities of roots entered in wall/slab surfaces and making good the surfaces including repairing the GI/CI/ACC/PVC pipe joints of that affected locations after applying herbal medicing making good to suit the adjoining surfaces shall be carried out using PCC (1:2:4) type 'B1' or cement mortar 1:2 with necessary scaffolding/staging etc upto a height of 7.00m from the ground level all as directed and as specified. |
| 145 | M&L for cutting down plants/trees of girth exc 10cm and n.exc 15 cm and applying ROUNDUP/GLYPOCET or equivalent (Herbal medicine) to roots of roof tops/sides, external walls of bldg chajjas, wall junctions at junctions of rain water/CI waste water pipe junction including taking out possible quantities of roots entered in wall/slab surfaces and making good the surfaces including repairing the GI/CI/ACC/PVC pipe joints of that affected locations after applying herbal medicing making good to suit the adjoining surfaces shall be carried out using PCC (1:2:4) type 'B1' or cement mortar 1:2 with necessary scaffolding/staging etc upto a height of 7.00m from the ground level all as directed and as specified. Please Enable Macros to View BoQ information |
| 146 | M&L for cutting down plants/trees of girth exc 10cm and n.exc 15 cm and applying ROUNDUP/GLYPOCET or equivalent (Herbal medicine) to roots of roof tops/sides, external walls of bldg chajjas, wall junctions at junctions of rain water/CI waste water pipe junction including taking out possible quantities of roots entered in wall/slab surfaces and making good the surfaces including repairing the GI/CI/ACC/PVC pipe joints of that affected locations after applying herbal medicing making good to suit the adjoining surfaces shall be carried out using PCC (1:2:4) type 'B1' or cement mortar 1:2 with necessary scaffolding/staging etc upto a height of 7.00m from the ground level all as directed and as specified. Please Enable Macros to View BoQ information |
