|
| 1 | Material and Labour for repairing and servicing /cleaning / Testing complete of 7.5 TR compressor unit with replacement of worn out /unserviceable parts and reassembling the same after complete repair with accessories such as nut, bolts, washers etc installation on existing foundation coupling with existing electrical motor with proper alignment including testing, commissioning complete to the entire Satisfaction of Engr-in-charge Note:- Condensor/Chiller coil cleaning by Basic chemical of approved make with preventing equipment from cleanser and avoiding any hazard to human being from chemical reaction. Testing shall be done for leak test, vaccum test, insulation, HV, wiring and performance test with complete test report with actual reading and read standerd parameter reading duly signed by HVAC maint Engineer/Tech of reputed firm. All spares parts as required for repair/overhauling shall be measured and paid separately under relevant item of Schedule 'A' |
| 2 | Material & Labour only for replacement of following parts/items suitable for compressor 7.5 TR capacity open type unit. Fan belt as per existing size |
| 3 | Material & Labour only for replacement of following parts/items suitable for compressor 7.5 TR capacity open type unit. Temperature gauge suitable for HVAC system for hot/chilled water water pipeline as existing with accessories |
| 4 | Material & Labour only for replacement of following parts/items suitable for compressor 7.5 TR capacity open type unit. Pressure gauge analog type with stainless steel syphon suitable for HVAC plant of capacity upto 45 TR TR as existing |
| 5 | Material & Labour only for replacement of following parts/items suitable for compressor 7.5 TR capacity open type unit. Oil failure switch |
| 6 | Material & Labour only for replacement of following parts/items suitable for compressor 7.5 TR capacity open type unit. Oil Pressure Switch |
| 7 | Material & Labour only for replacement of following parts/items suitable for compressor 7.5 TR capacity open type unit. Compressor oil |
| 8 | Digital Temperature Meter (RH & Ambient Room Temp). |
| 9 | S&F in replacement of Scroll type compressor parts of cap. 13 TR suitable for existing AC plants : Sub Bearing |
| 10 | S&F in replacement of Scroll type compressor parts of cap. 13 TR suitable for existing AC plants : Main bearing |
| 11 | S&F in replacement of Scroll type compressor parts of cap. 13 TR suitable for existing AC plants :Orbit bearing |
| 12 | S&F in replacement of Scroll type compressor parts of cap. 13 TR suitable for existing AC plants :Fixed Scroll |
| 13 | S&F in replacement of Scroll type compressor parts of cap. 13 TR suitable for existing AC plants : Compressor Chamber |
| 14 | S&F in replacement of Scroll type compressor parts of cap. 13 TR suitable for existing AC plants :Crank Shaft |
| 15 | S&F in replacement of Scroll type compressor parts of cap. 13 TR suitable for existing AC plants : Oil Pump |
| 16 | S&F in repair, PCB assy suitable for 25TR chiller unit complete with display model no SCR 25 TR (MPD) V4 type Delux HMI range 10/7/2 current range 5/30 A Aux supply 0-11VAC, 0-13VAC display model no. 25 TR HMI (5-30A) make Voltas including testing and programming of the PCB all as per existing make and model all as directed and specified by EIC. |
| 17 | S&F in repair, PCB assy complete with display Sl no DX-3LD-45 unit model no XWC35-039AR2 of rated cap 37.7 TR make Blue Star including testing all as directed and specified by EIC. |
| 18 | Servicing of Hot water Generator as per manufacturer norms of capacity 63/24/30 KW 3 steps any make complete as directed and specified by EIC. |
| 19 | S&F in repair, heating coil as per sample of hot water generator of capacity 63 KW model No RC63, 3 steps any make as per sample complete as directed and specified by EIC. |
| 20 | Material labour for replacement of following parts/items suitable for 10000/12000/4200 CFM capacity AHU unit of Contactor 4 pole 40Amps |
| 21 | Material labour for replacement of following parts/items suitable for 10000/12000/4200 CFM capacity AHU unit of Contactor 4 pole 32 Amps |
| 22 | Material labour for replacement of following parts/items suitable for 10000/12000/4200 CFM capacity AHU unit of Temperature gauge suitable for HVAC system for hot/chilled water water pipeline as existing with accessories |
| 23 | Material labour for replacement of following parts/items suitable for 10000/12000/4200 CFM capacity AHU unit of Pressure gauge analog type with stainless steel syphon suitable for HVAC plant of capacity upto 30 TR as existing |
| 24 | Material labour for replacement of following parts/items suitable for 10000/12000/4200 CFM capacity AHU unit of Digital Amps meter |
| 25 | Material labour for replacement of following parts/items suitable for 10000/12000/4200 CFM capacity AHU unit of Fan belt for AHU as per existing. |
| 26 | Material labour for replacement of following parts/items suitable for 10000/12000/4200 CFM capacity AHU unit of Thermal Relay 4-16 Amps of existing Please Enable Macros to View BoQ information |
| 27 | Material labour for replacement of following parts/items suitable for 10000/12000/4200 CFM capacity AHU unit of Thermal Relay 4-16 Amps of existing Please Enable Macros to View BoQ information |
