|
| 1 | Demolition of block work masonry, built in cement mortar including all quoins, pillars etc stacking the serviceable bricks after removing mortar and cleaning for re-use and disposal of debris and rubbish off the premises complete all as specified and directed. |
| 2 | M&L for PCC pre-cast cement concrete block masonry with solid blocks made from PCC 1:3:6 type C1 (with 20mm graded stone aggregate), exc. 10cm in width and setting in mortar1:6 complete all as specified and directed. |
| 3 | All as per item No. 2 here-in-before but except block.(Note: Serviceable blocks retrived from demolition of block work catered here-in- before shall be re-used.) |
| 4 | Taking down cement plaster of any description on brick or stone walls or concrete surfaces etc including ranking out joints hacking for key scrubbing down with water etc. |
| 5 | M & L for rendering 15 mm thick cement plastering on wall surfaces in two coats (10mm+5mm each) on fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with liquid water proofing compound in top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item). |
| 6 | Supply only liquid water proofing compound complete all as specified and directed. |
| 7 | M & L for rendering 10 mm thick cement plastering on wall surfaces in cement mortar 1:6 on other than fair face of brick-work or concrete surface and finishing the surface even and fair without using extra cement complete all as specified and directed. |
| 8 | M & L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper of any colour as approved by GE over a coat of primer over two mm thick wall care putty complete all as specified and directed. |
| 9 | M&L for preparing new plastered surfaces of walls and applying Two or more coats of 100% Premium acrylic exterior emulsion paint having VOC less than 50 m/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including one priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces as recommended by the manufacturer all as specified and as directed (Note : Rate shall be included for necessary scaffolding and safety measures where required at site ). |
| 10 | M & L for Preparation of old decorated surface of wall by washing. Rubbing down, and stopping and applying one coats of white wash complete all as specified and directed. |
| 11 | M & L for Preparation of old decorated surface of ceiling by washing. Rubbing down, and stopping and applying one coats of white wash complete all as specified and directed. |
| 12 | M & L for Preparation of old decorated surface of wall by washing. Rubbing down, and stopping distempered and applying one coats of oil bound distemper complete all as specified and directed. |
| 13 | M & L for Preparation of old decorated surface of ceiling by washing. Rubbing down, and stopping distempered and applying one coats of oil bound distemper complete all as specified and directed. |
| 14 | M&L for preparing old decorated plastered / unplastered surfaces of walls and applying one coat of 100% Premium acrylic exterior emulsion paint having VOC less than 50 m/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm as recommended by the manufacturer all as specified and as directed (Note : Rate shall be included for necessary scaffolding and safety measures where required at site ). |
| 15 | M & L for Preparation of old painted wood or wood based surface of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 16 | M & L for Preparation of old painted steel surface of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. Please Enable Macros to View BoQ information |
| 17 | M & L for Preparation of old painted steel surface of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. Please Enable Macros to View BoQ information |
