|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), ncluding dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 2 | All kinds of soil. |
| 3 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : |
| 4 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 5 | 1:4:8 (1 Cement : 4 coarse sand (zone-Ill) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form for |
| 7 | Foundations, footings, bases of columns, etc. for mass concrete |
| 8 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 9 | Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. |
| 10 | 12 mm cement plaster of mix: |
| 11 | 1:4(1 cement: 4 fine sand) |
| 12 | Purchasing and Supplying of CHEST PRESS DOUBLE (actual size- 6x2x8 feet) including all fittings Pipe : Structure pipe made of GI . pipe 4” 42 OD and 32 OD of 3 to 4 mm thickness Arm : structure made of 32 OD GI pipe of 3 to 4 mm thickness. GI Powder coated Apollo. B Cfass pipe outer Diameter 114mm • Paint – powder coated ( 80 to 90 micron) at work site as per direction of Engineer-in-charge. |
| 13 | Purchasing and Supplying of SHOULDER PRESS DOUBLE (actual size- 6x2x8 feet) including all fittingsPipe : Structure pipe made of GI . pipe 4” 42 OD and 32 OD of 3 to 4 mm thickness Arm : structure made of 32 OD GI pipe of 3 to 4 mm thickness. GI Powder coated Apollo. B Cfass pipe outer Diameter 114mm • Paint – powder coated (80 to 90micron) at work site as per direction of Engineer-in-charge |
| 14 | Purchasing and Supplying of STANDING TWISTER (actual size- 4.5x4.5x5.5 feet) including all fittingsPipe : Structure pipe made of GI . pipe 4” 42 OD and 32 OD of 3 to 4 mm thickness Arm : structure made of 32 OD GI pipe of 3 to 4 mm thickness. GI Powder coated Apollo. B Cfass pipe outer Diameter 114mm • Paint – powder coated ( 80 to 90 micron) at work site as per direction of Engineer-in-charge |
| 15 | Purchasing and Supplying of ROWER (actual size- 4x2x3 feet) including all fittings Pipe : Structure pipe made of GI . pipe 4” 42 OD and 32 OD of 3 to 4 mm thickness Arm : structure made of 32 OD GI pipe of 3 to 4 mm thickness. GI Powder coated Apollo. B Cfass pipe outer Diameter 114mm • Paint – powder coated ( 80 to 90 micron) at work site as per direction Engineer-in-charge. |
| 16 | Purchasing and Supplying of SITUP BOARD (actual size- 5x2.5x3 feet) including all fittings Pipe : Structure pipe made of GI . pipe 4” 42 OD and 32 OD of 3 to 4 mm thickness Arm : structure made of 32 OD GI pipe of 3 to 4 mm thickness. GI Powder coated Apollo. B Cfass pipe outer Diameter 114mm • Paint – powder coated ( 80 to 90 micron) at work site as per direction Engineer-in-charge. |
| 17 | Purchasing and Supplying of SKY WALKER (actual size- 5.5x3.5x6 feet) including all fittingsPipe : Structure pipe made of GI . pipe 4” 42 OD and 32 OD of 3 to 4 mm thickness Arm : structure made of 32 OD GI pipe of 3 to 4 mm thickness. GI Powder coated Apollo. B Cfass pipe outer Diameter 114mm • Paint – powder coated ( 80 to 90 micron) at work site as per direction Engineer-in-charge. |
| 18 | Purchasing and Supplying of LEG PRESS DOUBLE (actual size- 5x2.5x5 feet) including all fittingsPipe : Structure pipe made of GI . pipe 4” 42 OD and 32 OD of 3 to 4 mm thickness Arm : structure made of 32 OD GI pipe of 3 to 4 mm thickness. GI Powder coated Apollo. B Cfass pipe outer Diameter 114mm • Paint – powder coated ( 80 to 90 micron) at work site as per direction Engineer-in-charge. |
| 19 | Purchasing and Supplying of DOUBLE AIR WALKER (actual size- 6x2x5 feet) including all fittingsPipe : Structure pipe made of GI . pipe 4” 42 OD and 32 OD of 3 to 4 mm thickness Arm : structure made of 32 OD GI pipe of 3 to 4 mm thickness. GI Powder coated Apollo. B Cfass pipe outer Diameter 114mm • Paint – powder coated ( 80 to 90 micron) at work site as per direction Engineer-in-charge. |
| 20 | Purchasing and Supplying of PARALEL BAR (actual size- 7.8x2.6x4.7 feet) including all fittings Pipe : Structure pipe made of GI . pipe 4” 42 OD and 32 OD of 3 to 4 mm thickness Arm : structure made of 32 OD GI pipe of 3 to 4 mm thickness. GI Powder coated Apollo. B Cfass pipe outer Diameter 114mm • Paint – powder coated ( 80 to 90 micron) at work site as per direction Engineer-in-charge. |
| 21 | Purchasing and Supplying of ROLLER TREADMILL (actual size- 6.3x2.5x6 feet) including all fittings Pipe : Structure pipe made of GI . pipe 4” 42 OD and 32 OD of 3 to 4 mm thickness Arm : structure made of 32 OD GI pipe of 3 to 4 mm thickness. GI Powder coated Apollo. B Cfass pipe outer Diameter 114mm • Paint – powder coated ( 80 to 90 micron) at work site as per direction Engineer-in-charge. |
| 22 | Purchasing and Supplying of SHOULDER WHEEL (actual size- 2.8x2.4x5.5 feet) including all fittings Pipe : Structure pipe made of GI . pipe 4” 42 OD and 32 OD of 3 to 4 mm thickness Arm : structure made of 32 OD GI pipe of 3 to 4 mm thickness. GI Powder coated Apollo. B Cfass pipe outer Diameter 114mm • Paint – powder coated ( 80 to 90 micron) at work site as per direction Engineer-in-charge. |
| 23 | Purchasing and Supplying of HANGIG LADDER (actual size- 8x3x8 feet) including all fittingsPipe : Structure pipe made of GI . pipe 4” 42 OD and 32 OD of 3 to 4 mm thickness Arm : structure made of 32 OD GI pipe of 3 to 4 mm thickness. GI Powder coated Apollo. B Cfass pipe outer Diameter 114mm • Paint – powder coated ( 80 to 90 micron) at work site as per direction Engineer-in-charge. |
| 24 | Purchasing and Supplying of MULTIFUNCTION TRAINER (actual size- 4x2x8 feet) including all fittingsPipe : Structure pipe made of GI . pipe 4” 42 OD and 32 OD of 3 to 4 mm thickness Arm : structure made of 32 OD GI pipe of 3 to 4 mm thickness. GI Powder coated Apollo. B Cfass pipe outer Diameter 114mm • Paint – powder coated ( 80 to 90 micron) at work site as per direction Engineer-in-charge. |
| 25 | Purchasing and Supplying of POMMEL HORSE (actual size- 5x2.5x4 feet) including all fittingsPipe : Structure pipe made of GI . pipe 4” 42 OD and 32 OD of 3 to 4 mm thickness Arm : structure made of 32 OD GI pipe of 3 to 4 mm thickness. GI Powder coated Apollo. B Cfass pipe outer Diameter 114mm • Paint – powder coated ( 80 to 90 micron) at work site as per direction Engineer-in-charge. |
| 26 | Carriage of materials from Source to Chennai wharf & Chennai Wharf to Sri Vijaya Puram |
| 27 | Carriage of materials from Sri Vijaya Puram to Hut Bay Wharf & Hut Bay Wharf to work site Please Enable Macros to View BoQ information |
