|
| 1 | Sand Filling plienth including Supply of necessary quantities of sand from a distance not exceeding 8 kms from the site work and including watering, dressing etc. rate to i/c cost of all materials, labour and T&P etc required for proper completion of the work. SI Materials. |
| 2 | Providing and Laying in Cement Concrete 1:4:8(1 Cement : 4 coarse sand : 8 graded stone ballast 40 mm nominal size) and curing complete, including Cost of form work in foundation and floors. |
| 3 | Providing and laying vitrified floor tiels in size of 8mm thickness with water absorption less than 0.08% and conforming to IS:15622of approved make in all colours and shades, laid on 20mm thic cement mortar 1:4(1cement:4coarse sand) including grouting the joints with white cement and matching pigments etc, complte. |
| 4 | Excavation in foundation in ordinary soil (Loam, clay or sand) including lift up ot 1.5 M and lead up to 50M, and including filling, watering and ramming of the excavated earth into the trenches or into the space between the building and the sides of the foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the E/I upto a distance of 50M. from the foundation trenches. (Sl NO 251) |
| 5 | WBM G-2 (Inter Coat)Providing and laying spreading and compacting stone aggregates of specific sizes to water bound macadam specification incluidng spreading in uniform thickness hand packing rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber applying and brooming stone screening /binding materials to fill-up the interstices of coarse aggregate watering and compacting to the required dencity grading -2 as per technical specification clause 405 |
| 6 | Supply and laying of 80 mm thick interlocking tiles Rubber moulded reflective Zig-Zag cement concrete paver blocks manufactured by high pressure and controlled vibration machine having minimum 5 mm thick topping of cement mixed with 20% marble powder. The compressive strength of concrete paver blocks shall not be less than 30MPa & 4.50 kg/o. an I.S.I. marked as per drawing and confirming to I RC-SO-63-2004. Including 25 mm thik compacted bed of fine sand compacting and proper imbeding/laying of inter locking tiles, leveling and dressing of surface to required level and slop, filling joints with fine sand including the cost of materials, labour, T&P etc. (MORD Specification No- 1500) (CH No 20) |
| 7 | Dismantling brick work or stone work in lime or cement mortar and includin stacking of materials as directed by the Engineer-in-charge within a distance of 60 meters(200feet) |
| 8 | R.C.C. work with cement approved coarse sand and 2cm (3/4\\") gauge approved stone Girt in proportion 1:2:4 Raft Foundation excluding supply of reinforcement and its bending but including its fixing and binding the same necessary with 24BWG binding wire and including necessary centering and shuttering etc. and also including supply of materials labour and tools and plants etc required for proper completion of the work, strength of the concrete shall not be less than M-150 (Si, No- 287) |
| 9 | Same as Item No. 3 but RCC 1:1½:3 in columns (SI 289) |
| 10 | RCC work with cement, approved coarse sad and 2.0 cm gauge approved stone grit in proportions of 1:2:4 in slab excluding spply of reinforcement and its bending but including its fixing and binding wire and i/c supply of all materials, labour and T & P etc required for proper completion of the work (SI 284). |
| 11 | R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in Lintel excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-20 SI No 283 ) |
| 12 | Mild steel iron plain work such as reinforced cement conceete or brick work(whan not included shape in as over all rates) wrought to required shape as necessary including bending for proper complention of the work. And including supply of steel its wastage bands hooks and authorized overiapping shall be measures upto floor two level. (Si. No. 504) SOR Aydhoya |
| 13 | M-150 Class brick work 1:6 cement and Coarse sand mortar in foundation & plinth including supply of all materials labour T&P etc. required for proper completion of the work (Si,No.303) |
| 14 | 12 mm thick plaster 1:4 cement and coarse sand mortar over brick work including supply of all materials, labour and T&P etc. required for proper completion of work. And also including racking and washing joint as per direction of E/I. (S.I.No.584) (Rate- 160 + Diff of C & F. Sand SI. No 583-582) |
| 15 | Finishing column with worter prof Coat over a priming coat of water proof cement paint of approved quality such as super \\"Duromen\\" quality of required shad on undrcoated will surface to give an even shade after throughly brushing the surface to remove all dirt and remains of loose powered material including curing and cost of all materials labour T&P etc. complete. SI No 660+661 )(Agra SOR/2020 page No 44/31 New) |
| 16 | Mild steel or iron work in heavy size such as trusses, build up gates record racks , roof work , gates etc wrought to required from including drilling holes riveting or welding whare necessary and their fixing reqired for proper completion of the work. |
| 17 | Painting Or Varanishing on iron works in small areas or newwood work with one coat of ready mixed priming paint & Two coat of approved superior ready mixed paint of clear syuthetic varnish including supply of all materials, labour and T & P etc required for proper completion of the work. Paint to be used should confirm to the I.S.I No 103 1950 (S.I. No. 641+ 642) |
| 18 | Supply and fixing 6 mm thick approved china white/coloured glazed tiles in flooring or dado laid with 1:3 cement and approved coarse sand mortar finished and jointed with white cement slurry and pigment & polishing complete including supply of all materials , labour and T&P etc. required for proper comletion of the work. 1st Toilte |
| 19 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid (DSR) |
| 20 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 500x 400 mm |
| 21 | CPVC pipe 15mm dia |
| 22 | CPVC pipe 25mm dia |
| 23 | CPVC PIPE 100mm inner dia |
| 24 | Supply and fixing of flush doors commercial quality conforming to I.S.2202 Part 1 (1983) including fixing of wooden cleats & stoppers and including fixing and adjustment of hinges. Bolts locks , handles, springs. Fitting with necessary screws to be supplied deparmentally. @ 32mm thick |
| 25 | Providing and fixing PVC Water Storage Tank with 5 Layer including of all materials as par direction engineers in charge. |
| 26 | 4.0 cm thick plain cement concrete floor with 1:2:4 cement, approved coarse sand and stone grit laid in panels finished with 3 mm floating coat of neat cement and marble dust in ratio 5:1 as specified i/c supply of all materials, labour and T&P etc required for proper completion of the work (without base concrete) (SI 605). |
| 27 | 2 cm thick Cement plaster in dado or skirting in 1:2 consisting of one part of cement & two part of approved coarse sand laid in panels finished with 3 mm floating coat of neat cement or cement mixed witth marble dust in ration 5:1 i/c supply of all materials, labour and T&P etc required for proper completion of the work (SI 597 saharanpur). |
| 28 | Plain cement concret 1:2:4 cement, coarse sand 2 cm gauge stone grit i/c supply of all materials, labour and T&P etc required for proper completion of the work (SI 279b). |
| 29 | Providing and laying earthwork filling with cartage 3km including all completion of work . SCH PWD 253+ 3km cartage Please Enable Macros to View BoQ information |
