|
| 1 | E-QUOTATION For |
| 2 | Reception Desk: Providing & fixing Reception Desk of required size 3600Lx1200Wx750H in the reception lobby with all the necessary drawers and storage spaces on both side of the table, the drawer shall be operated by inbuilt niche and easily close and open with the assiasatnce of the roller chaneel to enable smooth operation. It has to be made from the 19mm thk. Marine plywood boiling water proof 710 grade and center portion below the table should be void. The top of the table is korean and sides are wrapped with curved corian as shown in the drawing ( As per dwg) etc complete. Mode of Measurement- Measurement of table top |
| 3 | Judge’s Chairs: Supplying and placing chair of size 750WX750DX1200H & 450 Seat height and made of seasond sheesham wood finished with melamine polish. Chair to be provided with armrest, seat & backrest to be cushioned & upholstered with faux leather fabric. Legs to be 75X75mm with carving, 50 mm wide & 20 mm thk armrest at 600mm height with carving on backrest as per design & as per approval of engineer in charge. Etc all complete. |
| 4 | Tables : (Made in situ) Providing and fixing Table as per required size having 750 mm height mad up of 75X75mm legs and binders from seasoned teak wood finished with melamine pu polish & top & central partition below table top in 19mm thk. Marine plywood BWP710 Grade, finished in 4mm thk. Veneer in approved color with PU finish with necessary drawers arrangement operated with telescopic channel of size 1.5” x 20” x 22” on both sides to enable smooth operationand SS Handles including necessary stainless steel fixtures and fastning as per reference design instructions of engineer in charge etc all complete. |
| 5 | Table : (Made in situ):- Providing and fixing A desk based system table with Cube legs are fabricated b powder coated M. S. rectangular pipe of size 40mm X 40mm. Cube legs are available for work top level 750 mm from base. Worktop: 25 mm thk prelaminated plywood with edge binding Material to be supplied by certified ISO 50001:2018, IS0 9001:2015, ISO 1400:2015, ISO 45001:2018, ISO 13485:2016, BIFMA & AIOTA member. Item Should have at least one of the GRIHA/GREENGAURD/GREENPRO/GREEN ASSURANCE Certifications adhering to standard environmental practices. Valid test certificate should be available for the item under consideration. As per reference design and instruction of engineer in charge etc all complete. |
| 6 | Staff Tables with Storage : (Made in situ) Providing & fixing Work Surface Staff table with frame fabricated by power coated M.S. rectangular pipe of size 40mm X 40mm. The work top should be made up of 25mm Thick Pre-laminated plywood of BWP 710 grade of approved shaved, Edge banded with matching 2 mm thick PVC lipping. Gromet provided on work Surface for wire management. Add for storage having size 450W x350Lx600H shall be provided to be made up of 25mm Thick Pre- laminated plywood of BWP 710 grade of approved shade with necessary drawers arrangements operated with telescopic channel of size 1.5” x 20” x 22” on both sides to enable smooth operation and below the drawers shlf to be provided for storage including necessary stainless steel fixtures and fastening. Handle is provided for ease of opening. Item should have at least one of the GRIHA/GREENGARUD/GREENPRO/GREEN ASSURANCE Certifications adhering to standard environmental practices. As per reference design and instruction of engineer in charge etc all complete. |
| 7 | Token Counter Tables: Supplying & Placing table of required size having 750 mm depth and 1050 mm in hight. The worktop shall be 45 mm thick having the combination of 19mm marine ply as top and 25mm thk marine ply as base top. The top shall have approved laminate and shade as well as deco paint with PU coating. The top shall be supported over side storage unit at one end and fixed pedestal unit at another end. The table shall be clad with 19mm thick modesty panel which provide structural support for the table. The table shall have side unite for storage of size 350WX450DX660H made up of 19 mm thk. Marine ply BWP710 Grade of approved make and finished in approved laminate and shade. The drawer shall be operated with SS handle and easily close & open with the assistance of roller telescopic channel of size 1.5” x 20” x 22” on both sides to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with on single key and including necessary stainless steel fixtures and fastning as per reference design and instructions of engineer in charge etc all complete |
| 8 | Tables : (Made in Situ): Supplying and placing table of size mentioned below made in 19mm/12mm thk. Marine plywood BWP710 Grade of approved make, the worktop shall be 50mm thk finished in 4mm thk. Veneer of in approved color with PU finish. Sides of the table will be supported by 50 mm thk veneer finished frame and the table shall have side unit for storage purpose with 25mm thk shutter, back facia, side panel etc. The drawer shall be operated by inbuilt niche and easily close and open with the assistance of roller telescopic channel of size 1.5” x 20” x 22” on both sides to enable smooth operation. The drawer shall have central locking mechanism in which all in which all the drawer shall be synchronized locked with one single key and including necessary stainless steel fixtures and fastening as per reference design and instructions engineer in charge etc all complete A) Judges Table in courtroom will come with a footrest as per dwg. |
| 9 | Tables : (Made in Situ): Supplying and placing table of size mentioned below made in 19mm/12mm thk. Marine plywood BWP710 Grade of approved make, the worktop shall be 50 mm thk finished in 4mm thk. Veneer of in approved color with PU finish. Sides of the table will be supported by 50mm thk veneer finished frame etc. Including necessary stainless steel fixtures and fastning as per reference design and instructions of engineer in charge etc all complete.B) Lawer’s Table in courtroom will come with 2 mic table and 12mm thk. Toughened glass divider fixed with all the necessary hardware as per dwg. |
| 10 | Study Table: (Made in situ) Study table of required size having 750mm height made of 75x75mm legs and binders from seasoned teak wood finished with melamine pu polish & top in 19 mm thk. Marine plywood BWP710 Grade finished in 4mm thk. Venue of in approved color with PU finish outside & 1mm thk. Approved make laminate on the inside with necessary drawers arrangements operated with telescopic channel of size 1.5” x 20” x 22” on both sides to enable smooth opertionand SS Handles including necessary stainless steel fixtures an fastning as SS Handles including necessary stainless steel fixtures and fastening as per reference design and instructions of engineer in charge etc all complete. . |
| 11 | Serving Counter : (Made in Situ) Providing & fixing serving counter of size 750Wx2400Lx750H in the canteen. The counter to be made up of 19mm thk. Maine BWP710 grade plywood frame structure below and Granite top above fixed on commercial marble by araldite. Below the table provide Storage areas with partition and lockable shutters & 1mm thk. Approved make laminate on the outside & inside with 75mm high skirting operated with SS Handles and neccesaary fixtures and fastening as per reference design and instructions of engineer in charged etc all complete. |
| 12 | Pantry Counter : ( Made in situ) Providing & fixing pantry counter of required length having size 750W and 850H in the canteen. The counter to be made up of 19mm thk. Marine BWP 710 grade plywood frame structure below and Granite top above fixed on commercial marble by araldite. Below the table provide storage areas with stainless steel kitchen trolley of overall 26” height and 22” depth , supported on aluminium pipes, trolley basket made of 5mm stainless steel rod fitted on telescopic channel of size 1.5” x 20” x 22” on both sides of trolley of 12” or above size, panel having 40 Kilogram load bearing capacity of trolley made out of 20 mm PUC Coated plywood and colour combinations as directed by E-I-C. Inner side of panel covered by white mica, 100mm s.s. decorative handle. ( The width and height of individual compartments shall be kept as directed by Engineer-in-charge) with neccesaary fixtures and fastening as per reference design and instructions of engineer in charged etc all complete. |
| 13 | Wardrobe- Judge’s Dormitory : (Made in Situ) Providing & fixing Wardobe of various size having depth 600 mm to be made of 19mm thk. Marine plywood BWP710 grade of approved make m finished in app. 4 mm thk. Veneer of Approved make from skirting with necessary drawers arrangement operated with telescopic channel of size 1.5” x 20” x 22” on both side to enable smooth opertionand SS Handles including neccessary stainless steel fixtures and fastening. As per design & as per approval of engineer in charge. Etc all complete. |
| 14 | Judge’s Dormitroy: Bed : (Made in situ) Providing & fixing Bed of size 2100Lx1950Wx400H made in 19mm thk. BWP710 grade plywood frame structure and finished in 4mm thk. Venner. Frame structure should fixed without storage. Headboard of size 2100Lx800H to be made in 19mm thk. Marine plywood BWP710 with foam-filled 3”thk. Plain padding & upholstered in fabric etc all complete. Aslo side tables of size 400LX400WX400H on both side of the bed should be provided made in 19 mm thk. BWP 710 grade plywood frame structures and finished in 4mm thk. Venner the drawer shall be operated by inbuilt niche and esily close and open with th assiastance roller chaneel to enable smooth operation. Selectin of design/model, leather, laminate, venner colour, wood polish should be approved by engineer in charge, architects and users etc complete. |
| 15 | Court Room : Dias Railing ( Made in situ) Providing and fixing dias railing in court room of size 975mm height and 100 mm thickness including 19mm thick 50x 50mm plywood frame in 600mm c/c covered with 12mm plywood from both sides and finished in 4mm thick veneer with P.U. Polish. Including 100x50mm top rail of seasoned teak wood supported on 50 mm dia wooden balusters should be provided on top of the rail. Also the provision of 750mm wide shutter of same specifications should be added for movement with all necessary fixtures and fastening as per design & drawing and instructions of engineer in charge etc. complete. |
| 16 | Court Room: Criminal bench Railing (Made in situ) Providing and fixing dias railing of size 900mm in height and 50 mm thick including 50mm x 50mm battenes of seasoned teak wood horizontal support in 150 mm interval supported vertically with 50mm x 50mm and 50mm x 25mm battens os seasoned teak wood in 600mm intervals alternatively including finished with melamine PU Polish with all fixtures and fastenting as per design & drawing and instructions of engineer in charge etc. complete. |
| 17 | Storage (Made in situ) Providing and fixing storage units of specified size having 450 mm depth upto 1.5m in length and 750 mm height made up of 19mm thk. Marine playwood BWP710 of approved make finished in 4mm thk. Veneer in approved color with PU finish outside and 1mm thk. Laminate on the inside with 75mm high skirting & appropriate quantity of shelfs and the shutters shall have central locking mechanism in which all the drawer shall be synchronized loked with one single key as per reference design and instructions of engineer in charge etc. all complete. |
| 18 | Storage (Made in situ) Providing and fixing storage units of specified size having 450 mm depth Above 1.5m to 5.0 in length and 750 mm height made up of 19mm thk. Marine playwood BWP710 of approved make finished in 4mm thk. Veneer in approved color with PU finish outside and 1mm thk. Laminate on the inside with 75mm high skirting & appropriate quantity of shelfs and the shutters shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key as per reference design and instructions of engineer in charge etc. all complete. . (RATE : Per Sq.M) |
| 19 | Court Room : Witness Box ( Made in Situ) Providing and fixing court room witness box of size 1350Wx1150Lx1050H, with ramp and step in Marine plywood BWP710 Grade finished in 4mm thk. Veneer in approved color with PU finish and railing & flooring made up of seasoned teak wood with mic stand as per reference design and instructions of engineer in charge etc all complete. (RATE : Per No.) |
| 20 | Court Room : Criminal Bench ( Made in situ) Providing and fixing court room criminal bench of various size having 450 m width and 450 height made up of 19mm thk. Marine plywood BWP710 Grade of approved make, finished in 4mm thk. Veneer of approved make in approved color with PU finish as per reference design and instructions of engineer in charge etc. all complete. |
| 21 | TV Units : (Made in situ) Supplying, placing & fixing TV Units of size 500Wx1800Lx400H to be made in Marine plywood BWP710 Grade of approved make, finished in 4mm thk. Veneer of approved make in approved color with PU finish & tempered glass top as per design & as per approval of engineer in charge . etc all complete. |
| 22 | Kitchen Counter Storrage with kitchen Trolley Providing and Fixing kitchen counter storage of required size with Granite top of 18mm thickcarcass made from marine plywood BWP710 Grade. Below the table provide storage areas with stainless steel kitche trolley of overall 26” height and 22” depth, supported on aluminium pipes, trolley basket made out of 5mm stainless steel rod fitted on telescopic, channel of size 1.5” x 20” x22” on both sides of trolley of 12” or above size, panel having 40Kilogramload bearing capacity of trolley made out of 20 mm PUC Coated plywood and colour combination as directed by E-I-C . Inner side of panel covered by white mica , 100mm s.s. decorative handle. ( The width and height of individual compartments shall be kept as directed by Engineer-in-charge) with necessary fixtures and fastenting as per reference design and instruction of engineer in charged etc all complete. |
| 23 | Dressing Table : (Made in situ) Providing & fixing dressing table required size to be made from 19mm thick marine plywood BWP710 Grade of approved make, finished in app. 4mm thk. The unit has one drawer and one shelf. The dressing table has a mirror of 4mm thick pasted on 12mm thick marine plywood BWP710 Grade of approved make attached to the base unit. Veneer of approved make in approved colour with pu finish from outside & 1mm thk. Approved make laminate on the inside with 75mm high skirting. The mirror size considered as per design and drawings. The mirror has been pasted using high quality sticker. As per design & as per RA. |
| 24 | Full Ht. Solid Partition: (Made in situ) Providing and fixing Full height partition of minimum 65 mm thick made by using aluminium frame with 50x50 mm vertical members equally spaced at 600c/c fixed with 4mm thick veneer of approved make fixed on 12mm thick BWP710 grade marine plywood of the requisite manufacturer of approved make finished with melamine polish etc complete. 6mm thick clear glass fixed with necessary fixtures and fastenings as shown in the Drawing all complete as per instructions of engineer in charge. With guarantee of 10 years. |
| 25 | Half Ht. Solid Partition : (Made in situ) Half height partition upto 1.5m (5’) ht. and minimum 65 mm thk made by using 50x50 mm vertical members equally spaced aluminium frame at 600c/c fixed with 12mm thick BWP710 grade marine plywood of the requisite manufacturer optima 710/Kenwood/Chetak make. Confirming to IS 303/IS710-1980 finished with anti termite treatment etc. complete. On either side finished with approved 4 mm thick veneer of Naturals/Gracious/Silicon (color and finish as per specifications) etc all per instructions of engineer in charge. As per Drawing with guarantee of 10 years |
| 26 | Venner Panelling: (Made in situ) Providing and fixing 4mm thick or oak veneer panelling on walls of Naturals/Gracious/Silicon make on plywood backing made out of 50*25 mm thick C.C.T.W. frame work of size 600 *600mm centre or as per site condition covered by 12mm thick BWP710 grade marine plywood of the requisite manufacturer of approved make with melamine polish etc. complete as per Architectural drawings and Instructions of Engineer Incharge. With guarantee of 10 years. . (RATE : Per Sq.M) |
| 27 | CMM wall-Hung Cabinet : (Made in situ) Providing and fixing CMM Wall-Hung Cabinet of 400 mm depth to be made in 19 mm thk. Marine ply of approvd make with post from edge with shutters of 19mm thick marine plywood of approved make with lamination with all necessary fixtures and fastening as per reference design & provision of ventilation as per selection of engineer in charge etc. complete. . |
| 28 | Bookracks : Judges Chamber (Made in situ) Judge’s Office -Bookrack : Providing storage bookrack cabinet made in 19mm thk. Marine plywood BWP710 Grade of approved make, finished in 4mm thk. Veneer of Naturals/Gracious/Silicon in approved color. Shutter with aluminium frame made in 6mm thk. Clear toughened glass of Saint Gobain or similar make with lock mechnimsm. Internal shelves to have a clear height of not less than 350mm. |
| 29 | Shoe Racks : (Make in situ) Supplying and placing shoe Rack size 1800x450x450H required size with all necessary materials and fittings as shown in the drawing. As per reference necessary materials and fitting as shown in the drawing. As per reference image & as per approval of engineer in charge. etc all complete. As per dwg. |
| 30 | Court Room : Dias Flooring (Made in situ) Providing and fixing 12mm thick 150 mm strips of seasoned teak wooden dias flooring with PU polish as per design & drawing and instruction of engineer in charge. etc complete. |
| 31 | 30. Single Seater Wooden Chairs : ( courtroom and judges chamber) - Solid Wood Chair of size 550W x 500 D x 800H made of seasoned Teak wood finished with melamine polish. Chair to be provided with armrest, seat to be cushioned & upholestered with selected fabric. There is a non-slip mute pad at the bottom of the leg to rescue noise and protect the floor from scratches. The back of the chair is curved and fits the back for added comfort. Cushion pad filled with high resilience sponge, comfortable sitting, sedentary not tired as per design & as per approval of engineer in charge, achitects and users. etc all . |
| 32 | Providing & fixing plywood platform of specified height using 25mm thk blockboard of BWP710 grade in 600x600mm grid and top should be covered in 25mm thk blockboard of BWP710 grade with all the required hardwares as per design & as per approval of engineer in charge etc all complete. |
| 33 | Providing and fixing 10mm thk carpet of approved grade on tiles and plywood platform with all the required sticking solution as per selection and as per approved of engineer in charge etc all complete. |
| 34 | Providing and fixing a sliding folding partition of a size 13000Lx75wx3000H 1. Partition should be divided in 17 panel in acoustic treatment with aluminium framing. 12mm plywood cladded by approved grade fabric as per selection. The installation should be complete with the necessary hardware including track, rollers, hinges, handles, motors and other fittings. The partition must achieve a minimum sound reduction index of 35dB and be installed according to the instruction of engineer in charge etc all complete. Please Enable Macros to View BoQ information |
