|
| 1 | Dismantling floor, hearth or wall tiling including wall cement mortar, bedding (But not backing ) and rubbish of premises complete all as directed. |
| 2 | M&L for Non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.11 but nexc .18 sqm in floor etc set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match the screed bed with CM (1:4) 15mm thick laying floor tiles complete all as specified and directed. |
| 3 | M&L for Glazed ceramic coloured tiles in vertical surfaces 300 x 200/450 x 350 7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match over 10mm thick CM (1:4) in dado/skirting tiles complete all as specified and directed. |
| 4 | Demolition of precast concrete block walling built in cement mortar including all quoins, arches , pillars etc all as specified and as directed |
| 5 | M&L for pre cast solid block masonry set in CM 1:6 & casted in cement concrete type C-1 (1:3:6) using 20mm graded curshed stone aggregate complete all as specified and directed. |
| 6 | Demolition of cement concrete (unreinforced) in ground floor and pavings n'exc 15cm thick below or above ground level complete all as specified and as directed. |
| 7 | M & L for 75 mm PCC 1:3:6 type C-2 using 20mm graded crushed stone aggregate as plinth protection finished even and smooth with out using extra cement |
| 8 | S&F in repairs bib tap cast copper alloy chromium plated butterfly handle screwed down screwed for iron pipe completed (15mm dia tap). |
| 9 | S & F in repair 15mm bore pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe |
| 10 | S&F in repairs Angle stop valves, cast copper alloy, screwed down high pressure with crutch or butter fly handle, fancy type, chromium plated with long shank and cup (concealed type), 15mm bore dia of pipe fixed in repairs. complete all as directed by Engr-in-charge. |
| 11 | S&F in repairs PVC connection pipe suitable for connecting flushing cistern and WHB etc 450mm long complete all as specified and directed. |
| 12 | S & F in repairs 600X450mm 600 mm x 450 mm bevelled edge mirror of selected quality glass, mountained on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screw and cup washwers. |
| 13 | S&F gratings doom AISI-304 of size 150X150mm square in shape with 5mm border complete in all respect all as specified. |
| 14 | S&F in repairs Soap dish Cromum plated. |
| 15 | S&F in repairs Towel rail 600mm long Cromum plated (Minimum weight 190 gms). |
| 16 | Taking down steel tubing 25 or 32 mm bore of pipe and connections in any position including cleaning for refixing or removal to store complete all as directed by Engr-in-charge. |
| 17 | S&F 3 layer PP-R Polypropylene random copolymer pipes 25mm dia SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot and cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to wall, ceiling or in floors etc. |
| 18 | S&F 3 layer PP-R Polypropylene random copolymer pipes 32mm dia SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot and cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to wall, ceiling or in floors etc. |
| 19 | S&F in repairs PP-R gate valves 25 mm dia (brass insert) as per requirement of the site. |
| 20 | S & F in repair Vitreous china wash down water closet (Pedestal), white (EWC) including Plastic seat of same colour of WC, closed patttern with flat bottom, and cover and Mild steel chromium plated hinging device complete. |
| 21 | S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 22 | S & F in repair Vitreous China wash basin, white, flat back, size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe. |
| 23 | S&F in repairs Waste cupling for bore dia discharge pipe of PTMT (half or full threaded) minimum weight 32 -45 gms/40mm -60gms). |
| 24 | S & F in repairs 750 mm long, 32/ 40 mm dia., PVC flexible Waste pipe for sinks / wash hand basins. |
| 25 | Dismantling CI/PVC pipes of up to 100mm bore with fittings. |
| 26 | S&F in repairs 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber joints fixed to walls complete all as specified and directed by Engr-in-charge. |
| 27 | S&F repairs 110mm bore PVC (SWR) pipes single socketed, in any length with rubber joints fixed to walls complete all as specified and directed by Engr-in-charge. |
| 28 | PVC (SWR) 'S or P', trap of 110 mm bore. |
| 29 | S/F in repair 110 mm dia (SWR) bend any redius complete all as specified |
| 30 | Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and as directed |
| 31 | M&L for 15mm thick rendering using water proofing compound @ 3% of cement on other than fair faces of brick works finished even and smooth without using extra cement in cement mortar 1:6 complete all as specified and as directed |
| 32 | M&L for 10 mm thick rendering on fair faces of brick works finished even and smooth without using extra cement in cement mortar 1: 4 complete all as specified and as directed |
| 33 | M&L Intergral water proofing compound |
| 34 | M&L for preperation of new concrete /plastered surface of any description and applaying two coat of exterior emulsion paint over a coat of primer complete all as specified and as directed complete all as specified and as directed. |
| 35 | M&L for preperation of new concrete /plastered surface of any description,applying two coat of destemper oil emulsion over a coat of primer complete all as specified and as directed complete all as specified and as directed. |
| 36 | M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10 cm width or girth and change of existing colour including removal of sclaed paint and applying one coats of synthetic enamel paint complete all as specified and as directed. |
| 37 | Hacking out old broken glass (any thick ness, size, quality or description) from wooden panes or stone, concrete or brick surrounds, glazed with oil putty or fixed with beads complete all as specified and as directed . |
| 38 | M&L sheet glass 5mm thick ordinalry quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane complete all as specified and as directed. |
| 39 | S & F in repair Galvanized mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.4mm and fixed with tinned stacks, or galvanized wire staples. |
| 40 | S&F in repair 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed. |
| 41 | S&F in repair 150mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed. |
| 42 | S&F in repairs mild steel butt hinges, medium weight cold rolled 75mm size complete all as specified and as directed. |
| 43 | S&F 100 mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed. |
| 44 | S&F 100 mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed. |
| 45 | S&F in repair 250 mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and as directed |
| 46 | Dismantling wall/floor and ceiling boards any thickness including covered fillets and supporting members complete all as specified and as directed |
| 47 | Dismantlng framed wooden fillets, rails, posts, rafters, purlins, grids for ceiling & wall panelling etc under 40 Sq.cm in secton. |
| 48 | M&L for 2nd class soft wood clean sawn as in battens for grids of ceiling & lining fixed with nails exc 13 sqcm and n exc 25 sqcm in section.complete all as specified and as directed. |
| 49 | M&L for covered fillets of standard hard board not less than 6mm thick and up to 40mm wide and fixing with screws complete all as specified and as directed |
| 50 | M&L for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with nails to timber frame work as in wall panelling, shelves/boarding complete all as specified and as directed. |
| 51 | S&F anodised aluminium snap grid of size 605 x 605mm , frame work of false ceiling including hangers 6mm dia G.I (up to 1200mm length ) adjusting level fixed to roof slabs by means of ceilling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed by Engr -in-charge |
| 52 | S&F Gypsum board 9 mm thick and 600x600mm in size in ceiling fixed with screw or with staples on snap grid as per manufactures instructions, complete all as specified and directed by Engr-in-charge |
| 53 | Dismantling plain or corrugated steel sheeting any gauge thickness including nanital or similar pattern. |
| 54 | S&F 0.63mm thick Plain, galvanised, mild steel sheeting, in ridges,hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 |
| 55 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and position. (Cleaning repairing, etc. measured separately)hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measuredseparately) lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in |
| 56 | Taking down chowkats / frames with shutters (without taking off shutters from the frames) area n'exc 1.5 Sqm each complete all as directed by Engr-in-charge. |
| 57 | S&F Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frames for door, windows, ventilators with one or more rebates including joining cleat for fixinf etc complete all as specified. |
| 58 | S&F Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters,including aluminium jali fixed in one side, side hung type without sash,aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150mm long (1 Nos) hinges type B-21 100mm long (3 Nos) suitable handle (1 Nos) etc. complete all as specified |
| 59 | Providing 50mm thick insulation of water pipe line 20/25/32 mm dia pipe complete all as specified and directed by Engr in Charge. which includes of the following:-Export quality heat traceable (heat tape) , self regulating and auto cut with thermostate systemAluminum tapeK. Flex 19mmRock woolWire MashPolytheneCello tapeAluminum sheet 28 gauge |
| 60 | S & F PVC perforated caps screwed to ends of puff or vent pipes 32 mm |
| 61 | Demolition of stone slabs and tiles of any description or thickness in floors aprons etc.laid bedded and pointed in any mortar. |
| 62 | M&L for Cement concrete type B-2,1:4:8 (40mm graded aggreate) 100 mm thick as in sub -floors ,sub- bases ,floors and pavings,etc.. |
| 63 | M&L for Chequred cement concrete tiles 20cm X 20cm X 20mm thick, set ,pointed & jointed in neat cement slurry in floors polished with grey cement & pigments .Layed over 20mm thick cement screed base (1:6) and all as directed by Engr-in - charge. |
| 64 | Taking down carefully copper/aluminium point wiring (light, fan, socket and power point) complete fittings such as switches, ceiling rose, regulators, socket etc and removing material from site and making good disturbed surfaces of walls, floors/ceiling to match the existing surface all as spfd and directed by Engr-in-Charge. |
| 65 | Taking down of submain wiring surface of wall, floores / ceiling and match the existing complete all as specified and directed. |
| 66 | Point wiring complete with 1.5Sq.mm nominal area of copper conductor multi stranded PVC insulated and unsheathed 1100 volts cable drawn through & including PVC Casing & caping with standard accessories such as elbows, tees, junctions etc. and PVC moulded terminal box with top cover of including PVC insulated unsheathed solid 1.5Sqmm copper conductor cable as continuous earth lead all as specified and directed for the followings:- |
| 67 | One light/exhaust fan point controlled by one way switch |
| 68 | One switch socket outlet 6 Amps, 230 volts point on Same board |
| 69 | One switch socket outlet 6 Amps, 230 volts point on independent board |
| 70 | One bell/ buzzer point controlled by one push button on the same board with other switches or independent. |
| 71 | All as item No 66 above, but using cables 4 Sq mm size |
| 72 | Supply and replacement of lamp holder insulated body with back plate. |
| 73 | Supply and replacement of Bell Multi Music type complete all as directed. |
| 74 | Supply and fix Switch piano flush button single pole 6 Amps 230 volts one way complete all as directed. |
| 75 | Supply and fix Socket outlet 5 pin 6 Amps flush type.230 volts complete all as directed. |
| 76 | Supply and replacement of switch Socket out let two in one 5 pin 6 Amps flush type.230 volts complete all as directed. |
| 77 | Supply and fix switch Socket combination out let multi purpose 5 pin 6 Amps and 16Amps 230 volts complete all as directed. |
| 78 | Supply and fixf Ceiling rose, surface Bakelite three terminals complete all as directed. |
| 79 | Supply and fix in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volts 12 Ways all as specified and directed by Engr-in-Charge. |
| 80 | Supply and fix in replacement of MCB SPN 63 Amp 240 Volts AC ISI marked all as specified and directed by Engr-in-Charge. |
| 81 | Supply and fix in replacement of MCB SP 6-32 Amps. 240 Volts 50 HZ complete all as directed. |
| 82 | Supply and fix in replacement submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing Caping wire size 2x6.0 sq. mm + 1x6.0 sq. mm earth wire complete all as specified and directed. |
| 83 | Supply and Fixing only in Replacement LED light fitting 1X20 W, 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 84 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 85 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. |
| 86 | Supply, fixing, connecting and testing in replacement LED security light fitting 35 watt, 230 volt, AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp and bracket with impact and corrossion resistant incl thermal management in multiple optics complete with IP65/66 protection complete all as specified and directed. |
| 87 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete all as specified and directed Please Enable Macros to View BoQ information |
| 88 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete all as specified and directed Please Enable Macros to View BoQ information |
