Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Civil Work |
| 2 | Kothi No. 1, JCC Sardulgarh:-12.5 mm thick cement plaster 1:4 |
| 3 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish. |
| 4 | Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats) |
| 5 | Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats) |
| 6 | Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint. |
| 7 | Chowkats of commercial hard wood such as Hollock confirming to ISI specification no 1003 m kiln seasoned of doors and windows including iron hold fasts, corner straps cleats, stops, bolts for hold fasts etc, complete fixed in position Double Rebate (60mm x 150mm) |
| 8 | Providing and fixing commercial plywood 18mm thick |
| 9 | Hollock wood doors shutter windows shutter including hinges, screws, chocks, cheats, stops cords etc. complete fixed in position.panelled, glazed or glazed and panelled.35 mm thick |
| 10 | Renewing glass panes with putty and nails wherever necessary Glass panes weighing 10.75 Kg/sqm |
| 11 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/ Highlighter/ emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x600 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 12 | Supplying and fixing of Japani sheet frames (Chowkat) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section (standard design latest), including iron lugs (hold fasts) iron hinges conforming to PWD specifications including bolts for fixing steps, lock notch provision for receiving tower bolts and finished, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete to the satisfaction of Engineer-in-charge.Doors and windows frame of size 161mm x 60mm with 40 mm wide double rebate weighing 4.05 kg per meter. |
| 13 | Kota stone slab 20-25 mm thick flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 14 | Mazdoor (Semi Skilled) |
| 15 | Kothi No. 2 JCC Sardulgarh:-12.5 mm thick cement plaster 1:4 |
| 16 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish. |
| 17 | Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats) |
| 18 | Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats) |
| 19 | Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint. |
| 20 | Chowkats of commercial hard wood such as Hollock confirming to ISI specification no 1003 m kiln seasoned of doors and windows including iron hold fasts, corner straps cleats, stops, bolts for hold fasts etc, complete fixed in position Double Rebate (60mm x 150mm) |
| 21 | Providing and fixing commercial plywood 18mm thick |
| 22 | Hollock wood doors shutter windows shutter including hinges, screws, chocks, cheats, stops cords etc. complete fixed in position.panelled, glazed or glazed and panelled.35 mm thick |
| 23 | Renewing glass panes with putty and nails wherever necessary Glass panes weighing 10.75 Kg/sqm |
| 24 | 115mm thick brick wall in cement sand mortar 1:4 without reinforcement in foundations and plinth |
| 25 | Supplying and fixing of Japani sheet frames (Chowkat) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section (standard design latest), including iron lugs (hold fasts) iron hinges conforming to PWD specifications including bolts for fixing steps, lock notch provision for receiving tower bolts and finished, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete to the satisfaction of Engineer-in-charge.Doors and windows frame of size 161mm x 60mm with 40 mm wide double rebate weighing 4.05 kg per meter. |
| 26 | Kota stone slab 20-25 mm thick flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 27 | Regrading terracing of mud plaster covered with tiles or bricks in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud plaster to proper, slope, relaying mud plaster Gobri leaping and tiles or bricks grouted in cement mortar 1:3 (1 cement and 3 fine sand) including replacing unserviceable tiles, or bricks with new over and disposal of unserviceable material to the dumping ground within 50 m lead (The cost of new tiles or bricks excluded). |
| 28 | Mazdoor (Semi Skilled) |
| 29 | Public Health Work |
| 30 | Kothi No. 1, JCC Sardulgarh:-Sub Head 1Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect |
| 31 | Dismantling Sanitary fixtures such as Eurpoean/Indian/Orissa W.C., PVC / Chinaware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge. |
| 32 | Eurpoean/Indian/Orissa W.C., |
| 33 | Wash Hand Basin / Urinal Pot |
| 34 | Stainless Steel Sink/Mosaic Sink |
| 35 | CP Bib Cock/Angle Cock/Stop Cock/Shower/Bottle Trap |
| 36 | Wall mixer / Sink Mixer / Basin Mixer / Concealed Stop Cock |
| 37 | Bathroom Assessories such as Soap Dish, Towel Rail, Towel Ring, Towel Bracket, Mirror, Toilet Paper Holder, Seat Cover, Jet Pressure and all other accessories. |
| 38 | Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. |
| 39 | Dismantling H.C.I Soil pipes including disposal as desired by the Engineer-in-Charge. |
| 40 | 100mm i/d H.C.I. pipe |
| 41 | 75mm i/d H.C.I. pipe |
| 42 | Dismantling H.C.I specials including dismantalling of lead joints including cartage / disposal within 5 Km. |
| 43 | 100mm i/d H.C.I. pipe |
| 44 | 75mm i/d H.C.I. pipe |
| 45 | Dismantling concrete Cement concrete plain1:2:4 mix |
| 46 | Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. (a) Doors of area 3 sqm and below. |
| 47 | Cement concrete 1:2:4mixing by mechanical means using concrete mixer volumetric type |
| 48 | Providing and laying Rectified Porcelin floor tiles 400x400mm or more (thickness to be specified by the manufacturer) of premium quality conforming to IS:15622 of approved make in all colours laid on 20mm thick bed of Cement Mortar 1:4 ( 1 Cement : 4 Fine sand) for new flooring or laid with cement based high polymer modified quick set tile adhesive (water based) of approved make IS 15477 marked using 5 Kg adhesive perSqm of tile area in average 3mm thickness over existing floor, including pointing the joints with white cement and matching pigments etc.,complete. |
| 49 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS :15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry@ 3.3kg per sqm including pointing in whitecement mixed with pigment of matching shade complete. |
| 50 | Supplying and filling cinder on roof (Ist story) including light ramming |
| 51 | Supplying and filling cinder on roof (Ist story) including light ramming |
| 52 | Supplying and fixing of Japani sheet frames(Chowkat) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section (standard design latest), including iron lugs (hold fasts) iron hinges conforming to PWD specificationsincluding bolts for fixing steps, lock notch provision for receiving tower bolts and finished,fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete to thesatisfaction of Engineer-in-charge.Doors and windows frame of size 118mm x 60mm with 40 mm wide single rebate weighing 3.43 kg per meter. |
| 53 | Factory manufactured soild flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : IS 2202-1(1999) 30 mm thick |
| 54 | Cost of aluminium fitting complete for doors and windows such as tower bolts ,handles,Stoppers, and screws etc.for these fittings excluding sliding bolt) For shutter area above 0.50 sqm |
| 55 | Distempering with dry distemper of approved manufacture two or more coats over one priming coat to give an even shade |
| 56 | Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc. |
| 57 | Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint. |
| 58 | Providing Fixing Exuast fan complete in all respects( Size 12\\"x12\\") with frame and electrical connection |
| 59 | SUB HEAD 2 Internal /External Sewerage SystemProviding, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects.110 mm o/d pipes (for External sewar pipe ) |
| 60 | Disilting of manhole including all safety measures, cost of container T & P and disposal of silt upto 5km complete in all respectsDepth upto 3 m. |
| 61 | Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting,jointing, wastage, but excluding cost of jointing.Type B110 mm o/d SWR UPVC pipe line laidcomplete |
| 62 | 90mm o/d SWR UPVC pipe lines laidcomplete |
| 63 | Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects. |
| 64 | Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good toitsoriginal condition but excluding cost of lead joining.For 110 mm o/d pipesSingle Tee With Door |
| 65 | Single Tee |
| 66 | Elbow 90 Degree (All side socketed) |
| 67 | Coupler |
| 68 | PTrap/Floor Trap 110mm x 110mm |
| 69 | Reducing Tee Ring Type 110mm x |
| 70 | Vent Cowls |
| 71 | 90mm O/D pipeSingle Tee |
| 72 | Elbow 90 Degree (All side socketed) |
| 73 | Providing & Fixing in position M.S or heavy flat iron clamps made out of M.S flat iron not less than 5 mm of the approved design for fixing C.I. soil waste, vent or antisyhonage pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting.M.S. Holder bats clamps for 100mm i/d H.C.I. pipes |
| 74 | Providing & Fixing in position M.S or heavy flat iron clamps made out of M.S flat iron not less than 5 mm of the approved design for fixing C.I. soil waste, vent or antisyhonage pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting.M.S. Holder bats clamps for 90mm i/d H.C.I. pipes |
| 75 | Sub Head-3 : Internal Water Supply SystemCONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge.SDR 11 CPVC pipes & fittings 20mm o/d |
| 76 | CPVC SDR 11 Pipe & fitting 25mm o/d |
| 77 | Providing, fixing and jointing ISI Marked GunMetal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete25mm i/d Gun Metal peet valve heavy pattern |
| 78 | INTERNAL - EXPOSED ON WALL :Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in-Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings with one step PVC solvent cement and testing of pipes complete as per direction of Engineer-in Charge.SDR 11 CPVC pipes & fittings 20mm o/d |
| 79 | SDR 11 CPVC pipes & fittings 25mm o/d |
| 80 | Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition.Size 75 mm x 75 mm |
| 81 | Cutting holes up to 23 cm square through B.B. in cement walls or stone masonry wall in cement for pipes, and making good the same & finishing according to existing finish where required.Through wall 11.43 cm thick |
| 82 | Through wall 22.86 cm thick |
| 83 | Sub Head-4 : Sanitary InstallationProviding and fixing in position Chinaware Floor Mounted One Piece EWC type with matching chinaware cistern 10 ltr. Capacity. (without cistern fitting) with P trap or S trap of approved make (to the approval of the Engineer-in-charge) and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.b) Chinaware Floor Mounted One Piece EWC rim less type with matching chinaware cistern 10 ltr. Capacity. (without cistern fitting) size 69x36x74 cm with P trap or Strap and seat cover complete in all respect. |
| 84 | Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge |
| 85 | Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1mm thick,grade-304 (18/8) with waste coupling complete in all respectSink with drain board overall size 1070x464mm bowl size 430x355x200mm and waste coupling |
| 86 | Providing & fixing in position C.P brass Sink mixer swivel spout (Wall mounted) of approved make (to the approval of Engineer in-charge) complete in all respect. |
| 87 | Providing and fixing jet spray with 2'-6\\" longPVC pipe with PTMT nut |
| 88 | Providing & Fixing in position C.P. Brass Hexa Nipple 15 mm of approved make (to the approval of Engineer-in-charge) complete in all respect. |
| 89 | Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect.Size 450mmx300mm |
| 90 | Size 550 mm x 400 mm x 815 mm |
| 91 | Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge) complete in all respect - PVC tube connection of size 15mm x 375 mm with PTMT nut |
| 92 | Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect |
| 93 | Providing & Fixing in position 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge) complete in all respect.C.P. brass Bib cock long nose/long body foam flow withoutflange |
| 94 | C.P. brass Bib cock foam flow without flange |
| 95 | Providing & Fixing in position stop cock / Angle valve of approved make (to the approval of Engineer-in-charge) complete in all respect.C.P.brass 15mm Concealed stop cock with flange. |
| 96 | C.P. Brass 15 mm Angle valve without flange |
| 97 | Providing & Fixing in position C.P. Brass flange of approved make (to the approval of Engineer-in-charge) under various fixtures complete in all respect. |
| 98 | Providing & Fixing in position C.P. Brass extension piece 25 mm long to 100 mm long of approved make (to the approval of Engineer- in-charge) with various fixtures complete in all respects.(i) C.P. Brass extensions piece,25mm long to 50mm long. |
| 99 | Providing and fixing in position paper holders of approved make (to the approval of Engineer-in-charge ) fixed in to wall with C.P brass screws complete in all respect(a) C.P. brass toilet paper holder |
| 100 | Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect.C.P. brass towel Rails size 15mm dia 610mm long |
| 101 | C.P brass towel ring |
| 102 | Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect |
| 103 | Providing & Fixing in position 5 mm thick bevelled edge mirror of superior glass (of approved make) complete with 4 mm thick hard board backing fixed in with rawl plugs 50 mm , C.P. brass screws and washers complete in all respect (as required by the Engineer-in- Charge) - Size 600 mm x 450 mm. |
| 104 | Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer - in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and base support for tank.Triple Layer Tanks |
| 105 | Providing Fixing of CPVC Union 25mm i/d |
| 106 | Providing Fixing of CPVC Ball Valve 25mm i/d |
| 107 | Providing Fixing of CPVC Tank Nipple 25mm i/d |
| 108 | Sub Head 5 Credit of Old MaterialCast Iron Sewer Pipe |
| 109 | PVC Cistern |
| 110 | Taps,Angel wall,Concield of Brass Material |
| 111 | Sub Head 6 CarriageCarriage of material excluding initial lead of 5 Km.Ghaggar Sand (Av. Lead 6 to 300 km) |
| 112 | Ghaggar Sand (Av. Lead 300 to 320 km) |
| 113 | Carriage of material excluding initial lead of 5 Km.Bazri (Av. Lead 6 to 300 km) |
| 114 | Bazri (Av. Lead 6 to 300 km) |
| 115 | Kothi No. 2 JCC Sardulgarh:-SUB HEAD 1 Construction Work Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect |
| 116 | Dismantling Sanitary fixtures such as Eurpoean/Indian/Orissa W.C., PVC / Chinaware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge. Eurpoean/Indian/Orissa W.C., |
| 117 | Wash Hand Basin/ Urinal Pot |
| 118 | Stainless Steel Sink/Mosaic Sink |
| 119 | CP Bib Cock/Angle Cock/Stop Cock/Shower/Bottle Trap |
| 120 | Wall mixer / Sink Mixer / Basin Mixer / Concealed Stop Cock |
| 121 | Bathroom Assessories such as Soap Dish, Towel Rail, Towel Ring, Towel Bracket, Mirror, Toilet Paper Holder, Seat Cover, Jet Pressure and all other accessories. |
| 122 | Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. |
| 123 | Dismantling H.C.I Soil pipes including disposal as desired by the Engineer-in-Charge.100mm i/d H.C.I. pipe |
| 124 | 75mm i/d H.C.I. pipe |
| 125 | Dismantling H.C.I specials including dismantalling of lead joints including cartage / disposal within 5 Km.100mm i/d H.C.I. pipe |
| 126 | 75mm i/d H.C.I. pipe |
| 127 | Dismantling concrete Cement concrete plain1:2:4 mix |
| 128 | Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. |
| 129 | Cement concrete 1:2:4 mixing by mechanical means using concrete mixer volumetric type |
| 130 | Providing and laying Rectified Porcelin floor tiles 400x400mm or more (thickness to be specified by the manufacturer) of premium quality conforming to IS:15622 of approved make in all colours laid on 20mm thick bed of Cement Mortar 1:4 ( 1 Cement : 4 Fine sand) for new flooring or laid with cement based high polymer modified quick set tile adhesive (water based) of approved make IS 15477 marked using 5 Kg adhesive perSqm of tile area in average 3mm thickness over existing floor, including pointing the joints with white cement and matching pigments etc.,complete. |
| 131 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS :15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement:4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in whitecement mixed with pigment of matching shade complete. |
| 132 | Supplying and filling cinder on roof (Ist story) including light ramming |
| 133 | Supplying and filling cinder on roof (Ist story) including light ramming |
| 134 | Supplying and fixing of Japani sheet frames (Chowkat) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section (standard design latest), including iron lugs (hold fasts) iron hinges conforming to PWD specificationsincluding bolts for fixing steps, lock notch provision for receiving tower bolts and finished, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete to thesatisfaction of Engineer-in-charge.Doors and windows frame of size 118mm x 60mm with 40 mm wide single rebate weighing 3.43 kg per meter. |
| 135 | Factory manufactured soild flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : IS 2202-1 (1999) |
| 136 | Cost of aluminium fitting complete for doors and windows such as tower bolts ,handles,Stoppers and screws etc. for these fittings excluding sliding bolt) For shutter area above 0.50 sqm |
| 137 | Distempering with dry distemper of approved manufacture two or more coats over one priming coat to give an even shade |
| 138 | Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc. |
| 139 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade including rubbing down old paint. |
| 140 | Providing Fixing Exuast fan complete in all respects( Size 12\\"x12\\") with frame and electrical connection |
| 141 | Sub Head-2 : Internal /External Sewerage SystemProviding, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects.110 mm o/d pipes (for External sewar pipe ) |
| 142 | Disilting of manhole including all safety measures, cost of container T & P and disposal of silt upto 5km complete in all respectsDepth upto 3 m. |
| 143 | Providing and fixing in position singel socketSWR UPVC soil waste or antisyphonage pipesas per IS 13592 of E.D.C manufacture or ofany other reputed firm including cutting,jointing, wastage, but excluding cost ofjointing.Type B110 mm o/d SWR UPVC pipe line laidcomplete |
| 144 | 90mm o/d SWR UPVC pipe lines laidcomplete |
| 145 | Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects. |
| 146 | Providing and fixing in position SWR UPVCspecial for soil waste vent or anti syphonagepipes as per as per IS - 14735 includingcutting and wastage etc. cutting holes in wallsroofs or floors etc. and making good to itsoriginal condition but excluding cost of leadjoining.For 110 mm o/d pipesSingle Tee With Door |
| 147 | Single Tee |
| 148 | Elbow 90 Degree (All side socketed) |
| 149 | Coupler |
| 150 | PTrap/Floor Trap 110mm x 110mm |
| 151 | Reducing Tee Ring Type 110mm x |
| 152 | Vent Cowls |
| 153 | 90mm O/D pipeSingle Tee |
| 154 | Elbow 90 Degree (All side socketed) |
| 155 | Providing & Fixing in position M.S or heavy flat iron clamps made out of M.S flat iron not less than 5 mm of the approved design for fixing C.I. soil waste, vent or antisyhonage pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting.M.S. Holder bats clamps for 100mm i/d H.C.I. pipes |
| 156 | Providing & Fixing in position M.S or heavy flat iron clamps made out of M.S flat iron not less than 5 mm of the approved design for fixing C.I. soil waste, vent or antisyhonage pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting.M.S. Holder bats clamps for 90mm i/d H.C.I. pipes |
| 157 | Sub Head-3 : Internal Water Supply SystemCONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge.SDR 11 CPVC pipes & fittings 20mm o/d |
| 158 | CPVC SDR 11 Pipe & fitting 25mm o/d |
| 159 | Providing, fixing and jointing ISI Marked GunMetal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete25mm i/d Gun Metal peet valve heavy pattern |
| 160 | INTERNAL - EXPOSED ON WALL :Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in-Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings with one step PVC solvent cement and testing of pipes complete as per direction of Engineer-in Charge.SDR 11 CPVC pipes & fittings 20mm o/d |
| 161 | SDR 11 CPVC pipes & fittings 25mm o/d |
| 162 | Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition.Size 75 mm x 75 mm |
| 163 | Cutting holes up to 23 cm square through B.B. in cement walls or stone masonry wall in cement for pipes, and making good the same & finishing according to existing finish where required.Through wall 11.43 cm thick |
| 164 | Through wall 22.86 cm thick |
| 165 | Sub Head-4 : Sanitary InstallationProviding and fixing in position Chinaware Floor Mounted One Piece EWC type with matching chinaware cistern 10 ltr. Capacity. (without cistern fitting) with P trap or S trap of approved make (to the approval of the Engineer-in-charge) and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.b) Chinaware Floor Mounted One Piece EWC rim less type with matching chinaware cistern 10 ltr. Capacity. (without cistern fitting) size 69x36x74 cm with P trap or Strap and seat cover complete in all respect. |
| 166 | Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge |
| 167 | Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1mm thick,grade-304 (18/8) with waste coupling complete in all respects.Sink with drain board overall size 1070x464mm bowl size 430x355x200mm and waste coupling |
| 168 | Providing & fixing in position C.P brass Sink mixer swivel spout (Wall mounted) of approved make (to the approval of Engineerin-charge) complete in all respect. |
| 169 | Providing and fixing jet spray with 2'-6\\" longPVC pipe with PTMT nut |
| 170 | Providing & Fixing in position C.P. Brass Hexa Nipple 15 mm of approved make (to the approval of Engineer-in-charge) complete in all respect. |
| 171 | Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect.Size 450mmx300mm |
| 172 | Size 550 mm x 400 mm x 815 mm |
| 173 | Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge) complete in all respect - PVC tube connection of size 15mm x 375 mm with PTMT nut |
| 174 | Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect |
| 175 | Providing & Fixing in position 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge) complete in all respect.C.P. brass Bib cock long nose/long body foam flow withoutflange |
| 176 | C.P. brass Bib cock without flange |
| 177 | Providing & Fixing in position stop cock / Angle valve of approved make (to the approval of Engineer-in-charge) complete in all respect.C.P.brass 15mm Concealed stop cock with flange. |
| 178 | C.P. Brass 15 mm Angle valve without flange |
| 179 | Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge) under various fixtures complete in all respect. |
| 180 | Providing & Fixing in position C.P. Brass extension piece 25 mm long to 100 mm long of approved make (to the approval of Engineer- in-charge) with various fixtures complete in all respect.(i) C.P. Brass extension piece,25mm long to 50mm long long. |
| 181 | Providing and fixing in position paper holders of approved make (to the approval of Engineer-in-charge ) fixed in to wall with C.P brass screws complete in all respect(a) C.P. brass toilet paper holder |
| 182 | Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect.C.P. brass towel Rails size 15mm dia 610mm long |
| 183 | C.P brass towel ring |
| 184 | Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect |
| 185 | Providing & Fixing in position 5 mm thick bevelled edge mirror of superior glass (of approved make) complete with 4 mm thick hard board backing fixed in with rawl plugs 50 mm , C.P. brass screws and washers complete in all respect (as required by the Engineer-in- Charge) - Size 600 mm x 450 mm. |
| 186 | Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer - in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and base support for tank.Triple Layer Tanks |
| 187 | Providing Fixing of CPVC Union 25mm i/d |
| 188 | Providing Fixing of CPVC Ball Valve 25mm i/d |
| 189 | Providing Fixing of CPVC Tank Nipple 25mm i/d |
| 190 | Sub Head 5 Credit of Old MaterialCast Iron Sewer Pipe |
| 191 | PVC Cistern |
| 192 | Taps,Angel wall,Concield of Brass Material |
| 193 | Sub Head 6 CarriageCarriage of material excluding initial lead of 5 Km.Ghaggar Sand (Av. Lead 6 to 300 km) |
| 194 | Ghaggar Sand (Av. Lead 300 to 320 km) |
| 195 | Carriage of material excluding initial lead of 5 Km.Bazri (Av. Lead 6 to 300 km) |
| 196 | Bazri (Av. Lead 6 to 300 km) |
| 197 | Electrical Work |
| 198 | Kothi No. 1, JCC Sardulgarh:-PVC INSULATED FR COPPER CONDUCTOR CABLES:Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-Overall size 1.5sq.mm (Un-sheathed) |
| 199 | Overall size 4sq.mm (Un-sheathed) |
| 200 | Overall size 6sq.mm (Un-sheathed) |
| 201 | Overall size 10sq.mm (Un-sheathed) |
| 202 | PVC, HDPE PIPES & PVC FLEXIBLE PIPES:Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-Heavy Gauge PVC Conduit Pipe 25mm dia. (On Surface) |
| 203 | Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed) |
| 204 | MINIATURE CIRCUIT BREAKERS:Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-MCB Single Pole 6-32amp. (10kA, Curve-C) |
| 205 | MCB Double Pole 40amp. (10kA, Curve-C) |
| 206 | MCB Four Pole 50, 63amp. (10kA, Curve-C) |
| 207 | SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's:Supply and erection of sheet metal Double Door Distribution Boards IP 43-IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-SP&N Double Door Distribution Board 8 way each |
| 208 | SUPPLY AND ERECTION OF WIRING ACCESSORIES:Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.:-6/10amp. One Way Modular Switch (One Module) |
| 209 | 6/10amp. Two Way Modular Switch (One Module) |
| 210 | 16/20amp. One Way Modular Switch with Indicator (One Module) |
| 211 | 6/10amp. One Way Modular Bell Push (One Module) |
| 212 | 6amp. 2/3 Universal Modular Shuttered Socket (two Module) |
| 213 | 16/20amp. Universal Modular Shuttered Socket (two Module) |
| 214 | Step type Modular Electronic Fan Regulator 100watts (Two Module) |
| 215 | Modular motor starter 25 A (Two Module) |
| 216 | Ceiling Rose (Flush Piano type) |
| 217 | Bakelite Batten Holder (Large size) |
| 218 | Call Bell 220/230 volts AC Ding Dong |
| 219 | Supply and erection of Modular Cover Frame (Complete set) on the existing metal box including fixing and connection of existing switches and sockets and other petty material etc:-Modular Cover Frame One or Two Module |
| 220 | Modular Cover Frame Three Module |
| 221 | Modular Cover Frame Four Module |
| 222 | Modular Cover Frame Six Module |
| 223 | Modular Cover Frame Eight Module |
| 224 | Modular Cover Frame Twelve Module |
| 225 | CAPACITORS & BALL BEARINGS:Supply and erection of Capacitors of different capacity for ceiling fans, exhaust fan & street light fittings etc.:-Capacitor 2.5µF |
| 226 | REPAIR AND REWINDING OF CEILING/ EXHAUST FANS: Providing Full stator rewinding of a Ceiling fan/ Exhaust fan (Capacitor type) with super enamelled copper wire including cleaning & insulating the stator slots, sleeving, soldering, wrapping of cotton tape, varnishing, re-assembling & testing etc., complete:-Rewinding of Ceiling Fan 1200mm Sweep |
| 227 | Rewinding of Exhaust Fan 300mm Sweep |
| 228 | Supply and erection of LED batten 20 Watt LED (including constant LED driver) with High quality extruded aluminium with efficacy of LED fixture minimunm 100 lumens per watt and operating voltage between 140 to 270 volt, THD <10% ingress protection IP20 (as per latest BIS standards) surge protection - 2.5 KV and above (as per IS/ IEC standards) wattage of each low power LED less than 1 watt input AC frequency 50 Hz ± 3 % with 5 year warranty including their drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited labortary. |
| 229 | Supply and erection of LED Street Light 45watt, Supply Voltage 140-270Volts AC supply, 50Hz ± 3% (including BIS Certified potted single diver with screen or laser printing logo LED driver) with pressure die cast or extruded aluminium housing with control gear (IP 66 protection), THD<10%, CRI minimum 70, High power LED (with wattage 1 to 5 Watt) with mandatory secondary lenses, toughened glass fitting, 4 KV SPD within driver and 10KV external SPD, Min IK07, efficacy of LED fixture minimum 120 lumens per watt, 5 year warranty including their drivers complete in all respects as approved and desired by the Engineer in-charge at site. LED Fittings as per specifications approved by Hon'ble Technical Advisor to Punjab Govt. vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufacturers should have in house NABL accredited lab. |
| 230 | Less the cost of dismental material |
| 231 | Kothi No. 2 JCC Sardulgarh:-PVC INSULATED FR COPPER CONDUCTOR CABLES:Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-Overall size 1.5sq.mm (Un-sheathed) |
| 232 | Overall size 4sq.mm (Un-sheathed) |
| 233 | Overall size 6sq.mm (Un-sheathed) |
| 234 | Overall size 10sq.mm (Un-sheathed) |
| 235 | PVC, HDPE PIPES & PVC FLEXIBLE PIPES:Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-Heavy Gauge PVC Conduit Pipe 25mm dia. (On Surface) |
| 236 | Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed) |
| 237 | MINIATURE CIRCUIT BREAKERS:Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-MCB Single Pole 6-32amp. (10kA, Curve-C) |
| 238 | MCB Double Pole 40amp. (10kA, Curve-C) |
| 239 | MCB Four Pole 50, 63amp. (10kA, Curve-C) |
| 240 | SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's:Supply and erection of sheet metal Double Door Distribution Boards IP 43-IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-SP&N Double Door Distribution Board 8 way each |
| 241 | SUPPLY AND ERECTION OF WIRING ACCESSORIES:Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.:-6/10amp. One Way Modular Switch (One Module) |
| 242 | 6/10amp. Two Way Modular Switch (One Module) |
| 243 | 16/20amp. One Way Modular Switch with Indicator (One Module) |
| 244 | 6/10amp. One Way Modular Bell Push (One Module) |
| 245 | 6amp. 2/3 Universal Modular Shuttered Socket (two Module) |
| 246 | 16/20amp. Universal Modular Shuttered Socket (two Module) |
| 247 | Step type Modular Electronic Fan Regulator 100watts (Two Module) |
| 248 | Modular motor starter 25 A (Two Module) |
| 249 | Ceiling Rose (Flush Piano type) |
| 250 | Bakelite Batten Holder (Large size) |
| 251 | Call Bell 220/230 volts AC Ding Dong |
| 252 | Supply and erection of Modular Cover Frame (Complete set) on the existing metal box including fixing and connection of existing switches and sockets and other petty material etc:-Modular Cover Frame One or Two Module |
| 253 | Modular Cover Frame Three Module |
| 254 | Modular Cover Frame Four Module |
| 255 | Modular Cover Frame Six Module |
| 256 | Modular Cover Frame Eight Module |
| 257 | Modular Cover Frame Twelve Module |
| 258 | CAPACITORS & BALL BEARINGS:Supply and erection of Capacitors of different capacity for ceiling fans, exhaust fan & street light fittings etc.:-Capacitor 2.5µF |
| 259 | REPAIR AND REWINDING OF CEILING/ EXHAUST FANS:Providing Full stator rewinding of a Ceiling fan/ Exhaust fan (Capacitor type) with super enamelled copper wire including cleaning & insulating the stator slots, sleeving, soldering, wrapping of cotton tape, varnishing, re-assembling & testing etc., complete:-Rewinding of Ceiling Fan 1200mm Sweep |
| 260 | Rewinding of Exhaust Fan 300mm Sweep |
| 261 | Supply and erection of LED batten 20 Watt LED (including constant LED driver) with High quality extruded aluminium with efficacy of LED fixture minimunm 100 lumens per watt and operating voltage between 140 to 270 volt, THD <10% ingress protection IP20 (as per latest BIS standards) surge protection - 2.5 KV and above (as per IS/ IEC standards) wattage of each low power LED less than 1 watt input AC frequency 50 Hz ± 3 % with 5 year warranty including their drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited labortary. |
| 262 | Supply and erection of LED Street Light 45watt, Supply Voltage 140-270Volts AC supply, 50Hz ± 3% (including BIS Certified potted single diver with screen or laser printing logo LED driver) with pressure die cast or extruded aluminium housing with control gear (IP 66 protection), THD<10%, CRI minimum 70, High power LED (with wattage 1 to 5 Watt) with mandatory secondary lenses, toughened glass fitting, 4 KV SPD within driver and 10KV external SPD, Min IK07, efficacy of LED fixture minimum 120 lumens per watt, 5 year warranty including their drivers complete in all respects as approved and desired by the Engineer in-charge at site. LED Fittings as per specifications approved by Hon'ble Technical Advisor to Punjab Govt. vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufacturers should have in house NABL accredited lab. |
| 263 | Less the cost of dismental material Please Enable Macros to View BoQ information |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
