|
| 1 | Demolishing laterite stonemasonry in cement mortarincluding stacking ofserviceable material &disposal of unserviceablematerial within 50 mts.lead. |
| 2 | Dismantling G.I. sheetsroofing including ridgeships valleys and guttersetc. and stacking thematerial within 50 meterslead. |
| 3 | Dismantling doorswindows and clearestorywindows (steel or wood)shutters includingchowkhats architraveholdfast etc. complete andstaking within 50 mt. Lead;Of area 3 sq.m. and below |
| 4 | Dismantling the tile workin floors and roofs laid incement including stackingof materials within 50meters lead for thicknessof tiles 10mm to 25mm. |
| 5 | Earthwork in excavationby mechanical means(hydraulic excavator)/manual means infoundation pipelinetrenches drain (notexceeding 1.5 m in widthor 10 sq.m. on plan)including dressing of sidesand ramming of bottomslift upto 1.5 m includinggetting out the excavated soil and disposal of surplusexcavated soil as directedwithin a lead of 50 m.;Allkinds of soil |
| 6 | Earthwork in surfaceexcavation not exceeding30 cm depth(but exceeding1.5 m width as well as 10sq.m on plan) includingdisposal of excavated earthbeyond work site for allleads lift disposed earth tobe leveled and neatlydressed in:;Hard soil |
| 7 | Rubble packing with hardlaterite stone under floorsincluding wateringramming and consolidatingetc. in pipeline trenchesand other foundationscomplete. |
| 8 | Providing and laying inposition cement concrete 1:2:4 (1 cement : 2 coarsesand: 4 graded granitic orbasaltic stone aggregate 40m nominal size) excludingcost of centering shutteringand finishing :;All worksupto plinth level |
| 9 | Laterite masonry in neatlydressed stones of size asspecified in cement mortar1: 4 (1 cement : 4 coarsesand) in foundation andbasement. |
| 10 | Refilling the pipeline/foundation trenches plinth sidesfoundation etc. withavailable excavated earthin layers not exceeding 20cm depth consolidatingeach layer ramming andwatering lead upto 50 Mand all lifts and disposal ofsurplus earth as directed byEngineer in Charge. |
| 11 | Laterite masonry in neatlydressed stones for 23 cmsthick masonry walls in c.m. 1 : 4 (1 cement : 4coarse sand in foundationupto plinth level |
| 12 | Extra for laterite masonryin all sizes insuperstructure from floor Ilevel upto floor V level. |
| 13 | Centering & shutteringincluding StruttingPropping & removal offorms for :;Sides andSoffits of beams BeamHaunchings CantileverGirders Bressumers andLintels plinth beamsexceeding 1m in depth |
| 14 | Providing and layingreinforced cement concreteof grade M-25 (Mixdesign) with coarse sand &graded granatic or basalticstone Aggregate 20 mmnominal size as per mixdesign requirmentexcluding plastering &cost of centering/shuttering &reinforcement. includingadmixtures inrecommended proportionsas per IS 9103 toaccelerate retard setting ofconcrete improveworkability withoutimpairing the strength anddurability as per thedirection of the Engineer incharge. M-25 grade ofreinforced cement concreteby using 410 kg of cementper cu.m of concrete. Allworks upto floor five level. |
| 15 | Providing TMT steelreinforcement bars of(SAIL TATA. VIZAGJSW Steel Ltd.) )(Confirming to IS 1786 of1986) for RCC work(conforming to I.S. 1786 of1986) including bendingbinding & placing inposition in all the floorsalong with the factorymade precast concretecover blocks of specified sizes whose compressivestrength is not less thanthat of surroundingconcrete in the structuralmember. |
| 16 | 12mm cement plaster 1:3(1 cement : 3 fine sand) |
| 17 | 18mm cement plaster intwo coats under layer12mm thick cement plaster1:5 ( 1 cement : 5 coarsesand) and top layer 6mmthick with cement plaster1: 3 (1 cement : 3 coarsesand) finished with sponge. |
| 18 | Providing and fixing M.S.grill of required pattern inwooden frames ofWindows etc. with M.S.flats square or round barswith round headed boltsand nuts or by by screws.;Plain grill |
| 19 | Providing and fixinganodised aluminiumshutters in accordance withthe specification annexedherewith includingtransportation, scaffoldingand handling etc. completeas per direction of theEngineer-in-charge: windows with twosliding shutters using 18mm series shutters section.;Plain glass |
| 20 | Extra for powder coatingwith pure polyester powderof shade of required colouron the aluminium section |
| 21 | Providing and fixingvitrified glossy finished(600x600) and 10mm thicktiles in floor treads of stepslanding on 25mm thick bedof cement mortar 1:3 andjointed with cement slurrycomplete. |
| 22 | Steel work in built uptubular (round square orrectangular hollow tubesetc.) (Square Hollow Section (SHS) IS4923/Rectangular HollowSection (RHS) IS4923/Circular Hollow Section(CHS) IS1161 closedStructural Steel of (SAILTATA. VIZAG JSWAPOLLO Steel Ltd.) make(Min Yeild Stress 310Mpa)) trusses etc.including cutting hoistingfixing in position andapplying a priming coat ofapproved steel primerincluding welding andbolted with special shapedwashers etc. complete. |
| 23 | Painting two or more coats(excluding priming coat)with superior quality readymixed paint for steel workof approved brand &manufacture in all shadeson new work to give aneven shade. |
| 24 | Providing and fixingcolour coated galvuliumroofing sheets of 0.5mmthickness including all theaccessories (TATA make)but excluding the cost ofpurlins rafters trussesflashings etc. complete asper the directions of theEngineer in charge. |
| 25 | Add for providing & fixingFlashings -[Corners Ridgesvalleys gable end & Trims](Girth upto 610mm)including all theaccessories complete asper the directions of theEngineer in charge. |
| 26 | Providing and fixingPrince or equivalent makePVC SWR half roundeaves gutter with bolts nutsand flat iron brackets 40 x3 mm size complete.;250mm nominal size |
| 27 | Providing and fixing rigidPVC S.W.R. (soil waste &rain water drainage pipesof approved including lubricant etc. complete(single/double) socketed:;110 mm dia |
| 28 | Providing and fixing rigidPVC bend of requireddegree (of approved make)for S.W.R. drainage pipesof approved including lubricating.;110 mm dia |
| 29 | Providing and applyingwhite cement based puttyof average thickness 1.00mm of approved brand andmanufacturer over theplastered wall surface toprepare the surface evenand smooth complete. |
| 30 | Wall painting (two or morecoats) with plasticemulsion paint of approvedbrand and manufacture onnew work to give an evenshade. |
| 31 | Painting three or morecoats with acryllic exteriorpaint of approved brandand manufacture (Such asDulex/ Asian Paints/Sherwin Willians)including applying onecoat of cement primer andone coat of surfacetreatment etc. complete. |
| 32 | Providing & fixing 20 mmcaves barge boards 2ndclass matti wood |
| 33 | Providing and layingfactory made Shot blastedcement concreteinterlocking paver block ofminimum M35/M40 grademade by heavy duty blockmaking machine withstrong vibratorycompaction and ofaprpoved size and design /shape laid in 50 mm thickcompacted bed of coarsesand filling the joints withcoarse sand etc. allcomplete as per thedirection of Engineer.- in IWave Rectangular Square etc. shapes. The productsshould comply to IS 15658:2006 and manfucatured byISO9001: 2008 certifiedplant. The shot blastingshould be done using 0.4-0.5mm dia steel shots witha speed of 3200 rpm.;60mm thick in all coloursexcept grey (M35 grade) |
| 34 | Transportation andcarriage of material bytripper truck lead beond 5kms upto 10km. Includingloading, unloding.(i) Lime, moorum,Building, rubbish |
| 35 | Applying priming coatwith ready mixed red leadpaint of approved brandand manufacture on steelwork. |
| 36 | Applying one coat ofcement primer of approvedbrand and manufacture onwall surface. Please Enable Macros to View BoQ information |
