|
| 1 | Dismantling of Existing bath area by removing doors,ventilator, fittings old pipe lines ect. |
| 2 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, completeas per directions of Engineer-in-charge. |
| 3 | Dismantling the tile work in floors and roofs laid in cement including stacking of materials within 50 meters lead for thickness of tiles 10mm to 25mm. |
| 4 | Demolishing cement concrete 1:3:6 or richer mix including disposal of material within 50 m lead. |
| 5 | Providing & laying cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded granitic or basaltic stone aggrt. 40 mm. nominal size) excluding cost of centering, shuttering and finishing in:All works upto plinth level |
| 6 | 15mm cement plaster 1: 3 (1 cement : 3 fine sand) on the rough side of single or half brick wall. |
| 7 | Providing and and laying antiskid floor tiles 12 x 12 upto 16 x 16 in of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete (Basic rate of Rs.500/- per Sq.mtrs)Dark Shades |
| 8 | Providing and fixing 1st quality ceramic glazed wall tiles (Johnson, Somany, Kajaria )conforming to IS:15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @3.3kg per sq.m including pointing in white cement mixed with pigment of matching shade complete..(Basic Rate Rs.600/M2)Wall Ceramic Glazed Tiles : 300 x 450 |
| 9 | Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. 20mm dia - Astral/Ashirwad |
| 10 | Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. 25mm dia - Astral/Ashirwad |
| 11 | Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed:110 mm dia |
| 12 | Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete:110 mm dia |
| 13 | Providing and fixing stop cock of approved quality :Make jaquar/kolar |
| 14 | Providing and fixing of over head shower dia 180mm round single flow with rubit cleaning system with arm and long body bib cock with wall flange complete with all accessories and all labour and materials complete.jaquar /kohler make |
| 15 | Providing & fixing soap dish with bracket and container jaquar hindware/kohler/Marc make all labour and materials etc. complete. |
| 16 | Providing & fixing towel rail 600mm long jaquar ,hindware/kohler/Marc make all labour and materials etc. complete. |
| 17 | Providing and fixing of MIRROR (Same as avaible on site)with proper finishing , proper screwing.with all labour and material |
| 18 | Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1: 1 1/2:3 mix (1 cement: 1 1/2 coarse sand ;3 graded stone aggregate 20mm nominal size foundation concrete 1:1 1/2:3 mix (1 cemet ;1 1/2 coarse sand :8 graded stone agrregate 20mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design.Inside size 60 x 60cm and 60cm deep including C.I. cover with frame (light duty) 455x610mm internal diameter total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg). |
| 19 | Providing & fixing High density WPVC Door of 30mm thk shutter with frame of approx size 0.75 x 2.05 and accessories of chromium plated brass Latch (2 nos), handle (2 nos) , Tower bolt (1 Nos - 250 x 10 mm),Hinges (150mm- 3nos) per door ect. With all labour & material completed. (All accessories approved officer in charge) |
| 20 | Providing and laying of aluminium fixed with 65mm x 38mm tubular frame with 6mm thick glass sections are powder coated with pure ployster powder of thickness 75-80 microns with approved standard accessories. The glass would be fixed with taper clips with EPDM beading |
| 21 | Distempering two or more coats with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade. |
| 22 | Waterproofing of sunken slabs, toilet blocks, terraces on slabs under brickbats, roofs, watertanks. Cleaning the surface and filling cracks (if any), applying EPCO ACR wherever necessary, Providing and Moistening the surface with water to render it saturated. Mix Cement and Monobond WF in the ratio of 1.25 kg to 1 by weight and stir continuously. Apply minimum 2 coats with an interval of 12 hours minimum between the coats. Fix fiber mesh while the first coat is still tacky. Cure with sprinkling of water 3-4 times a day. incl. cost of scaffolding transport etc. as per dir of EIC. All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalent |
| 23 | Wiring for light point with 1.5 sq.mm (upto 6 mts) FRLS PVC insulated copper conductor single core cable in FRLS pvc / MS conduits or casing caping (as per engineers instruction), with modular switch, modular plate, suitable PVC modular box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. |
| 24 | Supplying , installation & commisioning of LED tubelight with power consumption: 9W, Lumen per wattage:100 lm/W, Shape: straight linear, input power fixture type : batten, length: 60cm, material type: polycarbonate, color temp: 6500k, with complete one years warranty . |
| 25 | Dismantling of existing aluminium door and fixing of new aluminium door with frame of approx size 0.90 X 2 Mtr and taking away all the dismantled material by approval of officers in charge. Please Enable Macros to View BoQ information |
