|
| 1 | 1. GROUND FLOOR REPAIRING : Repair to plaster of thickness 12mm to 20mm in patches of area 2.5 sqm and under including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-in-charge. |
| 2 | Dismantling W.C. pan of all sizes including disposal of dismantled materils i/c malba all complete as per direction of Engineer-in-charge. |
| 3 | Dismantling doors, windows and clerestory (steel or wood) shutter including chowkhats, holdfasts etc. complete and stacking within 50 metres lead:15.12.1 of area 3 sq. metres and below |
| 4 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.5.23.1 For thickness of tiles 10mm to 25mm |
| 5 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).9.1.1 Second class teak wood |
| 6 | Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15x10x10 cm with cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-charge.14.2.1 Door chowkhats |
| 7 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.9.48.2 Fixed to openings /wooden frames with rawl plugs screws etc. |
| 8 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 9 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete. |
| 10 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:13.48.1 Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 lts/10 sqm |
| 11 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter or required size comprising of virgin polymer of K value 58-60 (Suspension Grade) calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawl strength of 1800 N (Face) & 900 N (Edge) minimum compressive strenth 50N/mm2 modules of elasticity 850 N/mm2 and resistance to spread of flame of class A category with26.88.1 30mm thick |
| 12 | Providing fitting and fixing door shutter made of 32mm ply and finish with veneer sheet all complete as per site-incharge or engineer instruction. |
| 13 | Godrej Mortise lock handle lock set for main & internal doors NEH 20 home decore handle 9 inch lockbody 60mm 1CK Cylinder Knob from inside key Outside/equivalent. |
| 14 | Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :9.72.1 75x40x2.5 mm (ordinary type) |
| 15 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :9.74.1 250x10 mm |
| 16 | Finishing with Epoxy paint (two or more coat) at all locations prepared and applied as per manufacture's specification including appropriate priming coat, preparation of surface etc. complete.13.52.1 on steel work |
| 17 | Glazed Vitrified tiles Matt/Antiskid finish of size 11.41A.3.1 Size of Tile 600x600mm |
| 18 | Mk. Rt./Providing fitting and fixing wall panel made of 12mm ply and finish with veneer sheet all complete as per site-charge or engineer instruction. |
| 19 | 12.5mm thick tapered edge glass reinforced gypsum (GRG) board conforming to IS:2095- (Part 3): 1996 (Board with BIS certification marks). |
| 20 | Repairing of 4th Grade Qtr. :Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :15.12.1 Of area 3 sq. metres and below |
| 21 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.14.1.1 With cement mortar 1:4 (1 cement : 4 fine sand) |
| 22 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:15.28.1 G.S. Sheet |
| 23 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).9.1.3 Kiln seasoned and chemically treated hollock wood |
| 24 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:-Butt hinges and necessary screws shall be paid separately).9.5.1 Second class teak wood9.5.1.1 35 mm thick shutters |
| 25 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 12.1.3 0.63 mm thick with zinc coating not less than 275 gm/ m² |
| 26 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.12.4.2 0.63 mm thick with zinc coating not less than 275 gm/m² |
| 27 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 11.3.1 40 mm thick with 20 mm nominal size stone aggregate |
| 28 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc.9.3.2 Kiln seasoned and chemically treated hollock wood |
| 29 | Providing and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately).12.26.1 6 mm thick Cement fiber board as per IS: 14862 sqm |
| 30 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :13.43.1 Water thinnable cement primer sqm |
| 31 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 13.41.1 New work (two or more coats) over and including water thinnable priming coat with cement primer |
| 32 | Applying priming coat: 13.50.1 With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 33 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture sqm |
| 34 | 2. SANITARY WORKS :Single Piece-WC Jaquar/Hindware |
| 35 | Flexible Tube 12mm Dia. & 1.5m Long with Jaquar/Hindware |
| 36 | Hand shower 95x95mm square shade Jaquar/Hindware |
| 37 | Exposed shower Pipe round shap Jaquar/Hindware |
| 38 | Soap dish holder Jaquar/Hindware |
| 39 | Glass shelf Jaquar/Hindware |
| 40 | Towel Ring square Jaquar/Hindware |
| 41 | Single Towel Rail Jaquar/Hindware |
| 42 | Soap Dispenser with glass bottle Jaquar/Hindware |
| 43 | Toilet Roll holder Jaquar/Hindware |
| 44 | Vertical 15L Geyser Jaquar/Hindware |
| 45 | Hoses for Geyser Jaquar/Hindware |
| 46 | Angular stop cock with wall flange Jaquare/Hindware |
| 47 | 2 Way bib cock with wall flange Jaquar/Hindware |
| 48 | Faucet Jaquar/Handware |
| 49 | Pillar cock Jaquar/Hindware |
| 50 | Single lever wall mixer 3-in-1 system Jaquar/Hindware |
| 51 | Overhead shower Square shade Jaquare/Hindware |
| 52 | Wall Bracket for hand shower Jaqure/Hindware |
| 53 | Providing and fixing mirror of superior glass (of approved quality) and of required shade and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing:17.32.3 Oval shape 450x350mm (outer dimensions) |
| 54 | Providing and fixing soil, waste and vent pipes17.35.1 100mm dia17.35.1.1 Sand cast iron S&S pipe as per IS:1729 |
| 55 | 3.WATER SUPPLY WORKS :Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.18.8.1 15mm nominal dia pipes |
| 56 | 20 mm nominal outer dia Pipes |
| 57 | 25 mm nominal outer dia Pipes |
| 58 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.External work18.9.1 15mm nominl dia pipes |
| 59 | 18.9.2 20mm nominl dia pipes |
| 60 | 18.9.3 25mm nominl dia pipes |
| 61 | Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main:18.20.1 15mm nominal bore |
| 62 | 18.20.2 20mm nominal bore |
| 63 | 18.20.3 25mm nominal bore |
| 64 | Providing and fixing C.P. brass shower rose with 15 or 20mm inlet:18.22.2 150mm diameter |
| 65 | For 22mm x 15mm outer dia pipe |
| 66 | For 28mm x 22mm outer dia pipe |
| 67 | Providing and fixing required stainless steel fitting of press fit design of grade 316L as per IS:6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge Elbow 9018.90A.1 For 15mm outer dia pipe |
| 68 | 18.90A.2 For 22mm outer dia pipe |
| 69 | 18.90A.4 For 35mm outer dia pipe |
| 70 | Providing and fixing required stainless steel fitting of press fit design of grade 316L as per IS:6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. Equal Tee18.92A.1 For 15mm outer dia pipe |
| 71 | 18.92A.2 For 22mm outer dia pipe |
| 72 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS:12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 73 | 4. FURNITURE :King size Bed Godrej/Other make |
| 74 | 2 Door Steel Almirah Godraj/Other equivalent make |
| 75 | Serene Dresser Godrej/Other equivalent make |
| 76 | Bedside Table Godrej/Other equivalent make |
| 77 | Sofa (3+1+1 Seater, Grey) Godrej/Other equivalent make |
| 78 | 1 Seater Recliner Godrej/Other equivalent make |
| 79 | Nova 78x72x5 (Mattress Kind Bed, Coir, Memory Foam) Godrej/Other equivalent make |
| 80 | Pillow |
| 81 | Pillow cover |
| 82 | Bedsheet King size |
| 83 | Door Met |
| 84 | Hand Towel |
| 85 | Blanket |
| 86 | Carpet |
| 87 | Sony TV (55 inch) |
| 88 | Samsung 324L Double Door Refrigerator |
| 89 | Table Top Basin (only for vip room + conference) |
| 90 | Dinner set by Borosil |
| 91 | Drinking Glass set by Borosil |
| 92 | Glass Jug by Borosil |
| 93 | Dining Met |
| 94 | Saucer Set |
| 95 | Centre Table |
| 96 | 5. INTERNAL ELECTRIFICATION :Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.1.10.1 Group A |
| 97 | 1.10.2 Group B |
| 98 | 1.10.3 Group C |
| 99 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.1.14.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 100 | 1.14.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 101 | 1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 102 | Supplying and fixing following modular type switch/ socket on the existing switch box/ cover including connections etcas required.1.24.1 5/6 amps switch |
| 103 | 1.24.3 15/16 A switch |
| 104 | 1.24.4 3 pin 5/6 A socket outlet |
| 105 | 1.24.5 6 pin 15/16 A socket outlet |
| 106 | 1.24.8 Bell Push |
| 107 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 108 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.1.27.2 3 Module (100mmX75mm) |
| 109 | 1.27.5 8 Module (125mmX125mm) |
| 110 | 1.27.6 12 Module (200mmX150mm) |
| 111 | Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required1.28.2 3 Module |
| 112 | 1.28.5 8 Module |
| 113 | 1.28.6 12 Module |
| 114 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
| 115 | Supplying and fixing brass batten/ angle holder including connection etc. as required. |
| 116 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required.(But without MCB/RCCB/Isolator)2.3.1 6 WAY, Double door |
| 117 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.2.10.1 Single pole |
| 118 | Supplying and fixing following rating, double pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.2.12.2 63 A |
| 119 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 120 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) |
| 121 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
| 122 | Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. |
| 123 | Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required. |
| 124 | Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) |
| 125 | Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required. |
| 126 | Supplying with including fitting fixing of 18 Watt LED Tube Light etc. as directed by the Deptt . |
| 127 | Supplying with including fitting fixing of LED Bulb 9Watt etc. as derected by Deptt. |
| 128 | Supplying with including fitting fixing of Recessed mount Ceiling light 15 watt. etc. as directed by the Department. |
| 129 | Supplying with including fitting fixing of Exhaust Fan etc. as directed by Deptt |
| 130 | Supplying with including fitting fixing of BLDC Ceiling fan 1200mm etc. as directed by the Deptt. |
| 131 | Supplying with including fitting fixing of 1.5 ton A.C etc. as directed by the Deptt. |
| 132 | Supplying,with fitting & fixing of 3 KVA voltage stabilizer of following specification complete with necessary electrical connection etc. as required and as directed by the Department. (Microtec /equivalent). |
| 133 | Supplying with fitting & fixing of A.C/ Motor Starter Switch 240V-50Hz 43MRWH3009 25A Motor Starter complete with necessary electrical connection etc. as required and as directed by the Department. (Orient / Havell/ Bajaj Make). |
| 134 | Supplying and fitting fixing of electric storage water heater (Geyser) of ( Bajaj or equivalent make) including necessary connection etc. as required complete and as directed by the Department. 15 Ltr. Capacity |
| 135 | 6. EXTERNAL ELECTRIFICATION (DG+TRANSFORMER+STREET LIGHT) :Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.2.2.2 125 A, 16 KA, TP MCCB |
| 136 | 2.2.17 250 A, 50KA,FPMCCB |
| 137 | Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.2.15.3 63 A |
| 138 | Providing and fixing H.T. danger notice plate of 250 mm X 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. |
| 139 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.9.1.13. 3 X 95 sq. mm (38mm) |
| 140 | Supplying and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.9.2.21 3½ X 95 sq. mm |
| 141 | Supplying and erection of galvanised stay set for 11 KV over head lines complete with 19/ 20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm thick, thimble, stay clamps, turn buckle ( 20 mm X 600 mm ), 7/ 4.00 mm dia G.I. stay wire and 11 KV strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required. |
| 142 | Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for two 11 KV over head line conductors complete with 50 mm X 50 mm X 6 mm (angle iron bracket welded to the channel iron and complete with 50 mm X 6mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required. |
| 143 | Supplying and erection of 11 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required |
| 144 | Supplying and erection of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required |
| 145 | Supplying and erection of three piece nonlinear resistor type lightning arrestor suitable for 3 wire, 11 KV overhead lines with rated voltage 9 KV (rms) with a nominal discharge current rating of 5 KA and complete with galvanised clamping arrangement, G.I. bolts, nuts, washers etc. as required |
| 146 | Supply, Installation and Commissioning of 30 W Solar Two-In-One(Semi Integrated) LED street light System with Poly Crystalline PV Panel, output 125lm/W, Battery 30Ah, Type of Battery :12.8V LiFePo4, Panel-125Wp and 7m Octagonal Pole. as required and as directed by the Department (Surya/Orient/Bajaj/Havells or equivalent). |
| 147 | Supplying including erection of 12.00 Mtr. G.I. Steel Tubular Pole (410-SP-60) (Stnd.Weight 208 K.g.) along with fitting fixing, excavation work, foundation of bolts and nuts in R.C.C. work in 1:3:6 proportion of 1.80 Mtr. Depth, Cement plastering and etc. complete with all necessary materials as required and specified by the Department.12 Mtr. G.I. Steel Tubular Pole (410-SP-60) |
| 148 | Supplying including installation, commissioning of 500 Amp, Indoor Type, Floor Mounted, Distribution Control Panel Board, 1.6 mm CRCA Sheetmade, painted with SIEMENS GREY Powder Coat Paints after Pretreatment through 9 Tank (Cold Processing), 250 Amps Aluminium Busbar, Angle Stand Frame (40 mm x 40 mm x 6 mm), internal wiring and Labour charge etc. Size = 1500 mm (L) x 1200 mm (H) x 300 mm (D). |
| 149 | Supplying,installation,testing and commissioning of the 63 KVA 11/0,433KV Aluminium wound outdoor type oil filled (4 Star/ Level-II) Transformer complete including all accessories like Earthing terminal, Lifting Lugs, Drain Valve, Oil filling Hole with plug, Silicigel Breather, First filling of Oil as per IS 355, Arcing Horn, Radiator, Air Release Plug, Conservator Tank etc. along with charging approval of the Sub-Station from the competent authority as directed and specified by the department. Transformer should be as per CEA guideline as ammended up to date.(All require materials for the Sub-Station will be measured & paid separately) (POWER MAKER UNIT -II).63 KVA 11/0,433KV |
| 150 | Supplying Power / Control Copper Cables, Solid Copper conthuctor up to 6 sq. mm balance Stranded,XLPE Insulated, cores laid up,PVC tape inner sheathed for Multicore Cables, Unarmored / Armour ( Glavanised wire for cables up to 10 x1.5 sq.mm, 8 x 2.5 sq,mm, 2 x 10 sq.mm, 3 x 10 sq.mm, 4 x 6 sq.mm balance all galvanized steel strip), extruded PVC Type ST2 Sheathed,650/1100 V grade as per IS 7098 (Part 1) 1988 (Havells, RR, or equivalent make as approved by the Deptt.) 2.5 sq.mm 10 Core Copper cable. |
| 151 | Supply of following size PVC/XLPE insulated and PVC sheathed 1.1KV Gd. Solid Aluminum conductor up to 10 sq.mm, balance stranded conductor, XLPE Insulated, core laid up, PVC tape inner sheathed, Armor (Aluminum wire for single core up to 70 sq.mm, balance Aluminum strip, Galvanized wire for cable up to 2 x 10 sq.mm, 4 x 6 sq.mm & balance all galvanized steel strip), extruded PVC Type ST2 sheathed, 650/1100V grad as per IS 7908 (Part-I) 1988 armored U.G. cable as specified and directed by the deptt. (Havells, RR or equivalent make as approved by this Deptt.)A-6.00 sq.mm 2 Core U.G. Cable |
| 152 | B-10.00 sq.mm 2 Core U.G. Cable |
| 153 | C-95.00 sq.mm 3.5 Core U.G. Cable |
| 154 | Supplying with fitting and fixing of 11 KV GOAB Switch 400 Amp. as required and specified by the Department. |
| 155 | Supplying with fitting and fixing of 11 KV D.O. Fuse set 200A Assembly as required and specified by the Department. |
| 156 | Supplying with fitting and fixing of 3-Phase-4W Combined CT/PT Accuracy Class 0.5 400/5A, STC:18.1KA for 1 Sec. as required and specified by the Department. |
| 157 | Supplying with fitting and fixing 11 KV 1C x 70sq.mm AAAC Covered Conductor. |
| 158 | plying with errection of CI Earth pipe 1.8m inner dia 100mm, outer dia 110mm with perforated holes of 15mm dia at 30 cm interval along length of the pipe as required and specified by the Department. |
| 159 | DTR Fencing as per REC standard specification complete with material & labour. (As per APDCL -2021-22) |
| 160 | Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 36kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in an enclosure and necessary connection.160Amp 4P MCCB |
| 161 | 160Amp 4P Manual Changeover Switch |
| 162 | Supplying and fixing double door Vertical TPN Distribution board for MCCB incomer with IP-43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.(Up to 160A)12WAY VTPN DB |
| 163 | Supplying,installation,testing and commissioning of the KILOSKAR - KOEL GREEN 62.5 KVA SILANT DG SET Speification :-KG1-500WS- ENGINE MODEL- DV10 TAG1 WATER COOLED, BHP 608 @1500 RPM,10 CYLINDER,ALTERNATOR : KILOSKAR GREEN, 3 PH,415V, 0.8PF,50HZ. DIMENSIONS :L 5650 x W 2000 x H 3177 mm.WT. 8050kg. Fuel Tank 990 Ltr. 1st Fill of Lube Oil & coolant. Battery AVM Pads, Std. Control Panel With Microprocessor Controller With Engine Safeties & Protections. Residential Silencer. Please Enable Macros to View BoQ information |
