|
| 1 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead : With cement mortar 1:4 (1 cement : 4 coarse sand).(DSR : 14.1.2) |
| 2 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete (DSR 13.88) |
| 3 | Removing dry or oil bound distemper water proffing cement paint and the like by scrapping sand parering and preparing the surface smooth including necessary repairs to scratches etc. complete (DSR 13.91) |
| 4 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. (DSR 13. |
| 5 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade :Old work (one or more coats) (DSR 13.90.1) |
| 6 | Painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work (DSR : 13.98.1) |
| 7 | Finishing walls with water proofing cement paint of required shade : Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat.(DSR : 13.109.1) |
| 8 | Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm) (DSR : 13.44.1) |
| 9 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work (DSR 13.99.1 ) |
| 10 | Renewing glass panes, with putty and nails wherever necessary:- Float glass panes of thickness 4 mm (DSR : 14.5.1) |
| 11 | Providing and fixing aluminium 125mm handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete in all respecte to the entire satisfaction of the Engineer-In-Charge.(DSR 9.100.1) |
| 12 | Providing and fixing 150x10mm aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete in all respecte to the entire satisfaction of the Engineer-In-Charge. (DSR 9.97.4) |
| 13 | Providing and fixing 250x16mm aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete in all respecte to the entire satisfaction of the Engineer-In-Charge.(DSR 9.96.2) |
| 14 | Providing and fixing aluminium handing floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete in all respecte to the entire satisfaction of the Engineer-In-Charge.Twin rubber stopper (DSR 9.101.2) |
| 15 | Re grading/Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete |
| 16 | Pointing on brick work or brick flooring with cement mortar 1:3 (: 1 cement : 3 fine sand) ( Flush/Ruled/Stuck or weathered pointing )(DSR 13.31.1) |
| 17 | Providing and fixing aluminium angle section 38x38x4.8 mm for cornors of wall tile with steel screws, all complete as per directions of Engineer-in-charge. |
| 18 | Providing and fixing of 6mm thick polycarbonate alongwith aluminium profile with the help of tapping screws to the existing frame complete in all respects to thr entire satisification of Enginner-in-charge. Please Enable Macros to View BoQ information |
