|
| 1 | DSR Item No. 1.15Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel /PVC conduit including dismantling as required. |
| 2 | Group C. |
| 3 | DSR Item No. 1.17Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 4 | 3 x 1.5 sq. mm |
| 5 | 3 x 2.5 sq. mm |
| 6 | DSR item No.1.23Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. |
| 7 | 5/6 amps switch |
| 8 | 2 way 5/6 A. switch |
| 9 | 15/16 amps switch |
| 10 | 3 Pin 5/6 A. socket outlet |
| 11 | 6 Pin 15/16 A. socket outlet |
| 12 | Bell push |
| 13 | DSR item No.1.24Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 14 | 5/6 amps switch |
| 15 | 15/16 amps switch |
| 16 | 2 way 5/6 A. switch |
| 17 | 3 Pin 5/6 A. socket outlet |
| 18 | 6 pin 15/16 amps socket |
| 19 | Bell push |
| 20 | DSR Item No.1.38 Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required. |
| 21 | DSR Item No. 2.10 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 22 | Single pole |
| 23 | Double pole |
| 24 | Triple pole and neutral |
| 25 | DSR Item No. 2.16 Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V \\"C\\" curve DP MCB complete with connections, testing and commissioning etc. as required. |
| 26 | DSR Item No. 8.13LED Street light fixture, powder coated pressure die cast aluminum body (System lumen efficacy ≥120 <135 lm/Watt)Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, (As per Complete Item No. 1 of the DNIT). |
| 27 | 50 Watt |
| 28 | Supply and Erection of B.L. Holder of make Anchor Panta / Havells Reo/ Gold Medal Essenza ISI marked on existing Jn. Box / Wooden block including making connection etc as required. |
| 29 | Supply and Erection of electronic step type socket type fan regulator in existing B.L. Sheet including making connection and petty material reqd. to complete the job. The fan regulator should be of Anchor Panta / Havells Reo/ Gold Medal Essenza make only |
| 30 | Supply & Erection of 3 mm thick white glazed bakelite sheet on existing M.S. box. The job includes the cost of sheet and making holes & cutting and fixing with screws as required to complete the job. The make should be Super Hylam / Formica / GreenLam only. |
| 31 | Supply, Erection, Testing and commissioning of the following items in existing LED fittings installed on pole upto 12 Mtr. Long / wall in place of burnt out / defective material with the help of hydraulic ladder / Crain with bucket which shall be arranged by the firm at his own cost.(As per Complete Item No. 1 of the DNIT). |
| 32 | S/E of Electronic Driver suitable for existing 80/100 Watt. LED fitting. The Driver should be same make of existing fitting. |
| 33 | S/E of Electronic Driver suitable for existing 120/150 Watt. LED fitting. The Driver should be same make of existing fitting. |
| 34 | Supply, Erection, Testing and commissioning of the following accessories after dismantling the burnt out/ defective accessories with the help of ladder if required which shall be arranged by the firm at his own cost. The job includes cost of making connections with suitable rating copper wire and petty material required to complete the job to the entire satisfaction of Engineer-in-charge. |
| 35 | S/E of Electronic Driver suitable for existing 2’x2’ LED panel type fitting. The Driver should be of same make as that of existing fitting. |
| 36 | S/E of Electronic Driver suitable for existing 1’x1’ LED panel type fitting. The Driver should be of same make as that of existing fitting. |
| 37 | Supply & erection of Exhaust Fan (heavy duty motor with copper wound metallic body) following size complete with motor, metallic blades, double ball bearing with minimum power consumption, (As per Complete Item No. 1 of the DNIT). |
| 38 | Size 15” Sweep 900 RPM with louver of Havells make Turbo Force SP / Orient make Industrial Heavy Duty / Crompton make EXHD 300-6-1/ Bajaj make Supreme PLUS/ Usha make Turbo HDEF only. |
| 39 | DSR Item No. 8.16.3LED Flood Light, powder coated pressure die cast aluminum (System lumen efficacy ≥120 and <135 lm/Watt)Supplying, installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, (As per Complete Item No. 15 of the DNIT). |
| 40 | 100 Watt |
| 41 | DSR ITEM NO. LED 8.9.5Batten light (System lumen efficacy ≥105 <120 lm/Watt) Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, (As per Complete Item No. 16 of the DNIT). |
| 42 | 18-22 watt |
| 43 | S/E of 18Watt./20Watt. 4’ long LED tube rod made of polycarbonate material should be installed in existing LED fitting base only. The make of LED tube rod should be same as that of existing LED fitting. (As per Complete Item No. 17 of the DNIT). |
| 44 | DSR ITEM NO. 8.7LED Panel light 2x2 ft. (System lumen efficacy ≥120 <135 lm/Watt) Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, (As per Complete Item No. 18 of the DNIT). |
| 45 | 36 watt |
| 46 | DSR Item No. 8.6LED Panel light 4x1 ft. (System lumen efficacy ≥105 <120 lm/Watt)Supplying, installation, Testing & Commissioning of Panel light 4x1 ft., of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, (As per Complete Item No. 19 of the DNIT). |
| 47 | 36 Watt |
| 48 | Supply and erection of 5/7/9 Watt. LED lamp suitable for existing fitting. The LED lamp should be of Philips / Osram / Bajaj / Wipro / Twinkle make only. The job includes the cost of all other petty material etc. as required to complete the job to the entire satisfaction of Engineer-in-charge. The color and wattage of lamp should be as selected by the occupant. |
| 49 | Supply & erection of PVC Gang Box of anchor Panta make or its equivalent make Gold medal/ Havells only, including carriage, erection with suitable size of nuts/ bolts and other petty material etc. as required to complete the job to the entire satisfaction of Engineer-in-charge. |
| 50 | 1 Module |
| 51 | 3 Module |
| 52 | 4 Module |
| 53 | 6 Module |
| 54 | S/E of PVC Batton of following sizes. The Batton should be fixed on the wall with help of PVC rawl plug etc. to the entire satisfaction of EIC. |
| 55 | Size 1” |
| 56 | Size ¾” |
| 57 | DSR Item No. 2.2 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections Ics=100% Icu and Operational Voltage 690V etc. as required. |
| 58 | 100 A,30KA,FPMCCB Please Enable Macros to View BoQ information |
