|
| 1 | Dismantling Asbestos Cement Sheet roofing (AC Sheet) incliding ridges, hips, velleys, gutters, etc., and stacking the serviceable materials and dispostal of unserviceable materials within a lead of 100 m including all labour, tools, equipments, transport, fuel, etc., complete complying with AISS and as directed by the departmental officers. |
| 2 | Providing and laying Plain Cement Concrete 1:2:4 (One part of cement, 2 parts of Coarse M. Sand (Crushed Stone Sand) & 4 Parts of 40 mm nominal size metal ) for foundation using 40 mm nominal size graded metal including mixing, laying, levelling, consolidation, finishing and curing etc., complete complying with AISS and as directed by the departmental officers. |
| 3 | Providing and laying Reinforced Cement Concrete 1:1.5:3 (One part of cement, One and a half parts of M. Sand (Crushed Stone Sand) & Three Parts of graded stone aggregate (i.e.) 2 parts of 20mm nominal size graded metal & 1 part of 10mm nominal size graded metal) using 20 mm nominal size graded metal including mixing, laying, levelling, consolidation, finishing and curing etc., and excluding the cost of form work and reinforcement grills for all RCC works in all floors upto full height of the building etc., complete complying with AISS and as directed by the departmental officers. |
| 4 | Fabricating and placing in position of M.S / Tor steel grills for R.C.C works in all floors including cost of Steel, cutting, bending, binding with 16 Gauge GI Binding wire and placing in position etc., complete complying with AISS and as directed by the departmental officers. |
| 5 | Providing Form work including centring, shuttering for foundation footings of columns, mass concrete so as to give a rough finish shuttering and propping etc., complete complying with AISS and as directed by the departmental officers. |
| 6 | Brick work in Cement Mortar 1:5 (M. Sand (Crushed Stone Sand)) ( One cement, five M. Sand (Crushed Stone Sand)) using chamber burnt bricks for walls in Ground Floor of the building including cost of all materials, labour, curing etc., complete complying with AISS and as directed by the departmental officers. |
| 7 | Supplying the structural steel, MS Flats, Square Rods, Angles, Channels etc., for vertical members / bracing /stiffeners / Base plates or for any other usage as a structural member, fabricating, welding and erecting the frame work in position at the locations shown in the drawing including all labour, materials, conveyance, tools & plants, etc., complete and as directed by the departmental officers (Note 1. While fabricating, necessary holes and bolt & nut shall be provided at no extra cost in the structural members. 2. In case, the specified MS section is not available in the market, the nearest alternative section may be used after approval of the Engineer). : |
| 8 | Providing and fixing Precoated metal sheet 0.45mm for Roofing with hot dipped galvanised prepainted steel sheet for roof of make TATA or equivalent including cost of metal sheet, conveyance, fixing the sheet with necessary clamps / screws and labour charges for fixing sheet etc., complete complying with AISS and as directed by the departmental officers. |
| 9 | Providing and fixing the Aluminium Composite Panels (ACP) of 3.25mm thickness for Ornamental Elevation with #3M# brand two way tape and 1.2mm thick Aluminium channels /box section of size 50 x 20mm with weight not less than 2 kg. / 12 ft. to fix the ACP, fixed rigidly with the existing wall using suitable fasteners and neatly finishing the joints with DOW corning all weather sealant grade -789 including finishing the sharp edges etc., complete as per the approved design etc., complete and as directed bythe departmental officers. |
| 10 | Providing and fixing of 12.5 mm thick Gypsum Board False ceiling with suspended GI channels for every 2'-0# x 2'-0# c/c fixed with brass screws, etc. The surface joints to be finished with paper tape and putty etc.,. The cost including for all the materials, labour charges ... etc. complete and as directed by the departmental officers. |
| 11 | Plastering the Brick work 15 mm thick in Cement Mortar 1:5 (Plastering Sand (P-Sand)) (One cement, five Plastering Sand (P-Sand)) for all faces of walls (even and uneven) in all floors upto full height of the building including necessary scaffolding, racking of masonry joints, cleaning, curing etc., complete complying with AISS and as directed by the departmental officers. |
| 12 | Providing and laying approved colour and quality of Stain Free Nano Polish Vitrified Tiles 600 x 600 x 8mm in Cement Mortar 1:4 (M. Sand (Crushed Stone Sand)), 20 mm thick. The rate inclusive of cost of tiles, all materials, labour, white cement, conveyance etc., complete complying with AISS and as directed by the departmental officers. |
| 13 | Providing and fixing granite slabs (jet black) of 20mm thick (super fine polished with nosing edges) on the steps area of building, in between urinals and wherever required in Cement Mortar 1:4 (M. Sand (Crushed Stone Sand)). The rate inclusive of costof granite slab,chemical component, white cement, labour charges & conveyance etc., complete and as directed by the departmental officers. |
| 14 | Supplying and fixing in position of Wooden panelled door single shutter including cost of hold fasts and applying one coat of wood primer of approved quality, fixing of first quality ISI standard furniture fittings with screws / bolt & nuts, the rate shall include cost of wood, labour for wrought and put up, etc., complete complying with AISS and as directed by the departmental officers. |
| 15 | Supplying and fixing UPVC WINDOWS( Un-Plasticized Polyvinyl Chloride) windows of casement type (open) from the profile the size of outer frame 60mm X 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles aremulti chambered sections with wall thick of 2mm.The EPDM rubber (black colour) covered with overall the edges of frame and shutter. The shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned.Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work. The rate including cost of all materials, labour, tools & plants, conveyance, fixing in position etc., complete and as directed by the departmental officers. |
| 16 | Supplying and fixing of Stainless Steel sink using 304L Grade of size 600mm x 450mm x 200mm. with necessary fittings. The rate inclusive of Stainless Steel Sink, fabrication charges, conveyance charges, fixing charges, labour, necessary fittings Such as1 No. of 32mm dia. Waste Water pipe, 32mm dia. C.P. Waste Coupling etc., complete and as directed by the departmental officers. |
| 17 | Supplying and fixing in position 15mm dia. SS Long lever water tap of approved quality including all materials, labour, fixing charges, etc., complete and as directed by the departmental officers. |
| 18 | Supplying and laying in trenches 110 mm dia. PVC inflow pipe line 6 Kg./CM2 with necessary pipe specials such as elbow, tee, union joint etc., and the joints being tightened including threading cost of pipe, specials etc., complete complying with AISS and as directed by the departmental officers. |
| 19 | Supplying and fixing 25mm dia. PVC pipe 10 kg. per cm2 working pressure in wall, ceiling and floor with necessary clamps and screws, making holes in the wall wherever necessary by drilling holes in the roofs and walls, packed the holes with necessary brick works or concrete wherever necessary plastering the surface smooth with required scaffolding including cost of pipe and special such as elbows, tee, union joints, reducer etc., cutting threading etc., complete complying with AISS and as directed by the departmental officers. |
| 20 | Supplying and fixing in position of best Indian make heavy duty Gun Metal Gate Valve at 25mm dia. of approved quality including all materials, labour etc., complete complying with AISS and as directed by the departmental officers. |
| 21 | Supplying and fixing in position of 600 x 450 mm size Mirror of best make, first quality approved by the department including plywood back, plugs, screws etc., complete complying with AISS and as directed by the departmental officers. |
| 22 | Supplying and fixing in position Brass Chromium Plated Soap Tray of size 150mm x 100mm first quality approved by the department including plugs, screws, all materials, labour etc., complete complying with AISS and as directed by the departmental officers. |
| 23 | Supplying and fixing in position of Brass Chromium Plated Towel Rail 60cm long and 20mm dia. with Brackets first quality approved by the department including plugs, screws, all materials, labour etc., complete complying with AISS and as directed by the departmental officers. |
| 24 | Supply of 15mm dia Angle Cock - Chromium plated at Maintenance subdivision office including conveyance charges complete and as directed by the departmental officers. |
| 25 | Supplying and fixing in position of 100mm inlet and 75mm OD outlet PVC floor Nahini Trap of self cleaning design including necessary cement mortar should be provided wherever if required with necessary cement concrete 1:2:4 for embedding, curing, finishing including all materials, labour charges, & conveyance etc., complete and as directed by the departmental officers. |
| 26 | Painting TWO coats with Plastic emulsion paint of approved brand and colour over New Wall surfaces including one coat of alkalin resistance primer of approved brand so as to give an even shade. Prior to applying the primer, the wall surfaces shall be thoroughly cleaned of all grease, dirt, loose pieces, scales and make the surface even by applying wall putty and make good of the surface with sand paper etc., The cost including preparing the surface, all materials, labour, brushes, scaffolding, etc., complete complying with AISS and as directed by the departmental officers. |
| 27 | Applying One coat of Alkali Resistant Primer and Two coats of APEX - Exterior Emulsion Paint of approved colour and quality over the New wall surface in all floors to give an even shade after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand paperes smooth including all materials, labour, brushes, scaffolding, etc., complete complying with AISS and as directed by the departmental officers. |
| 28 | Applying Two coats of Synthetic Enamel paint (excluding priming coat) on New wood and wood based surfaces interior to give an even shade including cleaning of all dirt, dust and other foreign matter, sand papering and including cost of Synthetic EnamelPaint and labour charges etc., complete complying with AISS and as directed by the departmental officers. |
| 29 | Painting the steel surfaces with Two coats of Synthetic enamal paint of approved quality (excluding priming coat) on new steel and other metal surfaces with enamel paint, brushing, interior to give an even shade including cleaning the surface of all dirt, dust and other foreign matter including all materials, labour, brushes, etc., complete complying with AISS and as directed by the departmental officers. |
| 30 | Providing and Fixing Round Dining Table of size 7'6\\" Dia Making and fixing with 19mm Plywood box with 1mm Laminated finish and corian top. The cost including all materials, labour, transport etc.Complete complying with the BIS and as directed by the departmental Officers. |
| 31 | Supplying & Fixing of kitchen carpentry units for the counters of depth 1'3\\" and 2'3\\" consisting of carcass and shutter made of 18mm thick water proof ply wood of best quality finished with 1mm laminate on both side. The cost inclusive of all necessary Fixtures like handles, drawer slides, hinges, top hung Airlift and Expandable magic corner, Expandable Cutlery tray, Expandable plate rack make EBCO or equivalent etc., complete and as directed by the Engineerin-Charge. |
| 32 | Providing and fixing of all the Electrical Installations for the Corridor Area. The electrical works shall comply to IS and relevant electrical standards with proper safety protection. The electrical fixtures shall be aesthetic and matching with interior and also to meet the required standards.Modular switches, MCB's/MCCBs, Well designed lighting fixtures, earthing arrangement to all fixtures, conceled distribution boxes with suitable connectors, etc, separate run off from main distribution box, separate power wiring for air conditioners and other power loads (xerox, etc), UPS supply wiring to all fixtures, emergency change over arrangements, etc wiring works for CCTV system, 2 & 4 digit Intercom, telephone lines, T.V cables, LAN wire, calling bell, emergency lamp wiring and all other accessories. The cost including supply & fixing of all the required materials for complete electrical works, labour, transport etc. Complete works complying to Electrical Standards / provisions and as directed by the Departmental Officers. Please Enable Macros to View BoQ information |
