|
| 1 | Dismantling doors, windows and clerestorywindows (steel or wood) shutter includingchowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area beyond 3 sqm |
| 2 | Providing and fixing 1mm thick M.S. sheet door withframe of 40x40x6mm angle iron and 3mm M.S. gussetplates at the junctions and corners, & with cleats withbolts & nuts, rivets, locking arrangement, handles, hooks & eyes, pinlets including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approvedsteel primer etc. complete as required:-9.5.1 Using M.S. angels 40x40x6 mm for diagonal braces. |
| 3 | Dismantling GS sheet roofing including ridges, hips, valleys, gutters wind ties etc. including dismembering and stacking of serviceable materials and unserviceable materials separately with all lifts and upto a lead of 50 m etc.complete as per direction of the Engineer- in-charge. |
| 4 | Providing corrugated G.S. sheet roofing includingvertical/curved surface fixed with polymer coated Jor L hooks, bolts and nuts 8 mm diameter withbitumen and G.I. limpet washers or with G.I. limpetwashers filled with white lead and including a coatof approved steel primer and two coats of approvedpaint on overlapping of sheets complete (up to anypitch in horizontal/ vertical or curved surfaces)excluding the cost of purlins, rafters and trusses andincluding cutting to size and shape wherever required. |
| 5 | Demolishing lime concrete manually / by mechanical means including disposal of material with all lifts and upto 50 m lead etc. complete as per direction of the Engineer- in-charge. |
| 6 | Providing and laying cement concrete 1:2:4 (1 cement : 2fine sand : 4 graded well burnt brick aggregate) flooringfinished with a floating coat of neat cement includingcement slurry, rounding of edges and strips etc. all complete as per direction of Engineer-in-charge. |
| 7 | Dismantling old plaster or pointing, raking out joints, cleaning and preparing the surface for replasteringor re-pointing including disposal ofrubbish to the dumping ground with all leads and lifts etc.complete as per direction of the Engineer- incharge. |
| 8 | 12 mm cement plaster of mixCement mortar 1:4 (1 cement : 4 fine sand) |
| 9 | Distempering with 1st quality acrylic distemper (readymixed) having VOC content less than 50 grams/ litre, ofapproved brand and manufacture to give an even shade[Payment shall be made after submission of TestCertificate issued by the Manufacturer] : New work ( two or more coats) over and including water thinnable priming coat with cement primer |
| 10 | Distempering with 1st quality washable acrylic distemper of approved brand and manufacture and of required shade on old work ( one or more coats ), to give an even shade as required complete as per direction of the Engineer in charge. |
| 11 | Finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the Manufacturer] New work ( two or more coats applied @ 1.67 litre/10 sqmover and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 12 | Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour togive an even shade [Payment shall be made aftersubmission of Test Certificate issued by theManufacturer] : New work (two or more coats) including a coat of appropriate steel primer but excluding a coat of mordan tsolution sqm ₹ 89.50 |
| 13 | Providing ridges or hips of width 60 cm overall widthplain G.S. sheet fixed with polymer coated J or L hooks,bolts and nuts 8 mm dia G.I. limpet and bitumenwashers etc. complete as per direction of Engineer-in-Charge.0.63mm thick with zinc coating not less than 275gm/m2 |
| 14 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps Please Enable Macros to View BoQ information |
