|
| 1 | Repairs to plaster of thickness 12 mm to 20 mm inpatches of area 2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground with all leads and lifts including finishing even and smooth and curing complete as per direction of the Engineer in charge:With cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 2 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats,architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sqm and below. |
| 3 | Dismantling steel work in built up section in channels, angles, tees, flats including all gusset plates, bolts, nuts, cutting rivets, welding including dismembering and stacking of serviceable materials and nserviceable materials separately with all lifts and upto a lead of 50 m etc. complete as per direction of the Engineer- in-charge. |
| 4 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of gineer-in-charge : 15 mm to 40 mm nominal bore(Internal) |
| 5 | Above 40 mm nominal bore(External) |
| 6 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 7 | Providing and fixing factory made door frame (single rebate) made of solid PVC foam profile withhomogenous fine cellular structure having smooth outer integral skin having 60mm width & 30mmthickness and shall be fixed to wall as per instructions of Engineer-In-Charge using 100x8 sheet metal CSKscrews. |
| 8 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framedand fixed in position :- Local Teak Wood |
| 9 | First class brickwork in superstructure above plinth level & upto floor-five level including cost of allmaterials as required complete: In cement mortar 1:4 ( 1 cement : 4 fine sand ) |
| 10 | Providing and fixing 28 mm thick door shutter made of solid PVC foam profile with homogenous finecellular structure having smooth outer integral skin having 71mm width & 28mm thick as vertical &horizontal styles. Joints are made using solvent adhesive and GI ‘C sections (39mm x 19mm x 0.6mmthick) or M S pipe (40mm x 20mm ) stiffener frame insert & telescopic polymeric ‘L’ corners .The panelshall be filled with 3mm thick high - pressure compact laminate as per manufacturer’s specifications anddirections of the Engineer-in-charge, cover moulding shall be provided for covering fixing screws andelegant look.( for W.C. bathroom door shutter). |
| 11 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type,core of block board construction with frame of 1st class hard wood and well matched commercial 3 plyveneering with vertical grains or cross bands and face veeners on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 12 | Providing and fixing bright finished brass 100 mm mortice latch and lock ISI marked with six levers anda pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles withnecessary screws etc. complete (Best make ofapproved quality) |
| 13 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square orround bars etc. all complete.Fixed to openings /wooden frames with rawl plugs screws etc. |
| 14 | Providing 40 × 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts,nuts and wooden plugs and embedding in cement concrete block 30 × 10 × 15 cm 1:3:6 mix (1 cement : 3fine sand : 6 graded stone aggregate 20mm nominal size) |
| 15 | Providing and fixing bright finished brass towerbolts (barrel type)with necessary screws etc. complete :250 x 10 mm |
| 16 | Providing and fixing bright finished brass handles with screws etc. complete :100 mm |
| 17 | Providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand : 4 graded well burnt brick aggregate) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips and cost ofglass strips etc. all complete as per direction of Engineerin- charge. 40mm thick. |
| 18 | Providing and laying 1st class quality vitrified floor tiles in different sizes (thickness to be specified by the anufacturer) with water absorption less than 0.08% and conforming to IS: 15622 - 2017, of approved make, in all colours and shades, laid over 20mm thick cement mortar 1:4 (1 cement : 4 fine sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. all complete as per direction of the Engineer-in-charge. Glazed Vitrified Tiles (Glossy / Mat Finish/ Anti-Skid) Size of tile 600 mm x 600 mm |
| 19 | Extra for providing and laying Vitrified tiles (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622 - 2017, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 fine sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. all complete as per direction of the Engineer-in-charge 10.45.1)Soluble Salt Stainfree vitrified tiles (Glossy) / Double charged Stainfree vitrified tiles (Glossy) / Glazed Vitrified Tiles (Glossy / Mat Finish/ Anti-Skid) / Glazed Vitrified Tiles - Full Body (Glossy / Mat Finish/ Anti-Skid) |
| 20 | Providing and fixing 1st class quality ceramic glazed wall tiles conforming to IS : 15622 - 2017 (thickness to be specified by the manufacturer) of approved make in all colours, shades of any size as approved by Engineer-incharge in skirting, risers of steps and dados, laid over 12 mm thick bed of cement mortar 1 : 3 (1 cement : 3 fine sand) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade etc. all complete as per direction of the Engineer in-charge. 450 mm X 300 mm in all shades and design |
| 21 | Providing and fixing Marble stone in floors over 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand) jointed with ordinary cement slurry including pointing with white cement mixed with of matching shade,including rubbing and polishing etc. all complete as per direction of Engineer-in-charge.18 mm thick Marble stone,Raj Nagar plain marble |
| 22 | Tile work in skirting, risers of steps and dado up to 2 m height over 12 mm thick bed of cement mortar 1:3 (1cement :3 fine sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade 8mm thick Rajnagar marble tiles (polished) |
| 23 | 15 mm cement plaster on the rough side of single or half brick wall of mix:- Cement mortar 1:4 (1 cement : 4 fine sand) |
| 24 | Providing and fixing stainless steel ( SS 304 grade ) adjustable friction window stay of approved quality withnecessary stainless steel screws etc. to the side hung windows etc. complete as per direction of Engineer-incharge:- 205 x 19 mm |
| 25 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surfaceeven and smooth complete. |
| 26 | Finishing walls with textured exterior paint of required shade of approved brand and manufacture on old work( one or more coats ) including preparation of surface as required complete as per direction of the Engineer in charge |
| 27 | Applying priming coat [Payment shall be made after submission of Test Certificate issued by theManufacturer] :- With ready mixed Pink or Grey primer of approved brand and manufacture on wood work ( hard & soft wood ). |
| 28 | Applying priming coat [Payment shall be made after submission of Test Certificate issued by theManufacturer] :-With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works |
| 29 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]:- Two or more coats on new work |
| 30 | Grading roof for water proofing treatment complete as required as per direction of the Engineer-in-charge with :Cement concrete 1:2:4 (1 cement : 2 fine sand : 4 graded stone aggregate 20 mm nominal size) |
| 31 | Providing and fixing floor mounted, white vitreous chinasingle piece, double traps syphonic water closet approvedbrand/make, shape, size and pattern includingintegrated white vitreous china cistern of capacity 10litres with dual flushing system, including all fittings andfixtures with seat cover, cistern fittings, nuts, bolts andgasket etc including making connection with the existingP/Strap, complete in all respect as per directions of Engineerin-Engineerin-Charge.u - PVC PIPES WITH FITTINGS |
| 32 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste ofstandard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps. |
| 33 | Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets andstainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required:- Kitchen sink with drain board, 510x1040 mm bowl depth 250mm |
| 34 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 35 | Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall ofstandard shape with bracket of the same materials with snap fittings of approved quality and colours weighingnot less than 105 gms. |
| 36 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screwswith concealed fitting arrangement of approved quality and colour.600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms. |
| 37 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain &m brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall a)15 mm nominal outer dia .Pipes. |
| 38 | b)20 mm nominal outer dia .Pipes. |
| 39 | c)25 mm nominal outer dia .Pipes. |
| 40 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain &m brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall a)40 mm dia. nominal bore |
| 41 | b)75 mm nominal inner dia .Pipes. |
| 42 | c)100 mm nominal inner dia .Pipes. |
| 43 | Providing and fixing brass bib cock of approved quality : 15 mm nominal bore |
| 44 | Providing and fixing brass stop cock of approved quality : 15 mm nominal bore |
| 45 | Providing and placing on terrace (at all floor levels)polyethylene water storage tank ISI : 12701 markedwith cover and suitable locking arrangement andmaking necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank. |
| 46 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) asper IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part I. |
| 47 | Supply & installation of pre-painted Galvalume sheets for roofing/cladding (size, shape and pitch of corrugation as approved by Engineer-in-charge) in 550mpa steel grade, made out of Cold Rolled Steel coated with Zinc-Aluminium alloy coating of 43.5% Zn, 55% Al and 1.5% Silicon confirming to ASTM A792/A792M and AS1397, Alloy coating AZ150/AZ70, colour coated with high quality Polyester coating, top coated of modified polyester of 20 micron, back side coat of 5 micron, having epoxy primer coat of 5 micron on both side. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-incharge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM washers filled with white lead complete upto anypitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required and as per direction of Engineer-in-charge.0.50mm thickness |
| 48 | Clearing jungle including uprooting of rank vegetation,grass, brushwood, treesandsaplingsofgirthupto30cmmeasured at a height of 1mabove ground level andremoval of rubbishuptoadistanceof 50moutside theperiphery of the area cleared Please Enable Macros to View BoQ information |
