|
| 1 | Dismantling boarding, any description, fixed in any position with nails (including Cupboard shutter/Shelve upto 25mm thick) complete all as specified and directed. |
| 2 | S&F for 18mm thick PVC Celuka ply of one side prelaminated and other side plain white colour fixed with screws, solvent cement/ adhesive complete all as specified and directed. |
| 3 | S&F for 18mm thick PVC Celuka ply of both side plain white colour fixed with screws, solvent cement/ adhesive complete all as specified and directed. |
| 4 | S&F for 12mm thick PVC Celuka ply of both side plain white colour fixed with screws, solvent cement/ adhesive complete all as specified and directed. |
| 5 | S&F for continous (piano) hinges, mild steel, bright finished or electrogalvanised, width of flap 30mm complete all as specified and directed. |
| 6 | S&F for mild steel Easy- slide auto Hydraulic hinges (CH-S-8), package contains 2 units of hinges with 4 Nos screw for kitchen cabinet, Cup board, wardrobe etc complete all as specified and directed. |
| 7 | S&F for magnate catcher of metal body and striking plate heavy duty includind fixed with screw complete all as specified and directed. |
| 8 | S&F Brass 2 Levers Cupboard locks grade 1, Size 50mm complete all as specified and directed. |
| 9 | S&F 40mm dia cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed. |
| 10 | S&F for 100 mm size aluminium handles, cast type, anodised and fixed complete all as specified and directed. |
| 11 | Demolition of brickwork or stone/ boulder masonry, built in cement or lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 12 | M&L for brick work with sub class 'B' bricks (old size) straight or curved on plan, exc. 6m mean radius built, in cement mortar 1:6 as in manholes, septic tanks, soakage pits, drain etc in any position complete all as specified and directed. |
| 13 | M&L for brickwork with subclass 'B' bricks, straight or curved on plan (exceeding 6m mean radius), using serviceable old bricks obtained from demolition built in cement mortar 1:6, complete all as specified and directed. |
| 14 | Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 15 | M&L for 15 mm thick rendering on other than fair faces of brick work or concrete surfaces in cement plaster 1:4 complete all as specified and directed. |
| 16 | M&L for 10 mm thick rendering on fair faces of brick work or concrete surfaces in cement plaster 1:6 finished even and smooth (without using extra lime or cement) complete all as specified and directed. |
| 17 | M&L for applying two coats of cement base paint over a coat of primer including preparation of newly plastered surface of walls complete all as specified and directed. |
| 18 | M&L for applying two coats of oil-bound distemper (white or tinted) on newly plastered surfaces, over a coat of chalk whiting over and including 1mm thick wall care putty, complete all as specified and directed. |
| 19 | Taking down Chowkats or frames size not exceeding 1.5 Sq.m each with shutters (Without taking off shutters from the frames) complete all as specified and directed. |
| 20 | Taking down Chowkats or frames size exceeding 1.5 Sq.m but not exceeding 4 Sq.m each with shutters (Without taking off shutters from the frame) complete all as specified and directed. |
| 21 | Refixing shutters of any description exc 1 sq. m and n exc 2 sqm each complete all as specified and directed. |
| 22 | Taking down shutters of any description exc 1 sq. m and n exc 2 sqm each complete all as specified and directed. |
| 23 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 100 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. |
| 24 | S&f Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 125 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. |
| 25 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative type/ laminated flush door shutter (single or double leaf) of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 26 | S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 27 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 28 | S&F band, straps,supports or stay for rainwater,ventilating pipes, including bolts if required hookes (stay) heavy for large gates hook and pintle hinges large hasps and staples, chains hand made sliding bolts clamps hold fasts wall ties hooks for hanging fans plain angle cleats for securing purlin to wood trusses or rafters knee piece inserts two way and three way straps plate wahers and similar small articles confirming to Fe 290 Gde 165 complete all as specified and directed. |
| 29 | S&F Factory made single extruded WPC (Wood Polymer Composite) wire mesh solid WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, Door to be panelled with SS mosquito mesh and XTN aluminium Mesh for additional safety complete all as specified and directed. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 30 | S&F 150 mm long aluminium anodised , barrel tower bolt of extruded section and fixed complete all as specified and directed. |
| 31 | S&F 100 mm long aluminium anodised , barrel tower bolt of extruded section and fixed complete all as specified and directed. |
| 32 | S&F aluminum handles extruded type, anodized of 150 mm size complete all as specified and directed. |
| 33 | S&F aluminum handles extruded type, anodized of 100 mm size complete all as specified and directed. |
| 34 | S&F stainless steel butt hinges, 100mm long, medium weight, made from cold rolled mild steel, complete all as specified and directed. |
| 35 | S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 36 | S&F in repair butt hinges 75 mm long medium weight, cold rolled mild steel complete all as specified and directed. |
| 37 | S&F in repair butt hinges 100mm long medium weight, cold rolled mild steel complete all as specified and directed. |
| 38 | S&F in repairs extruded aluminum alloy handles 100 mm size fabricated type anodized all as specified complete all as specified and directed. |
| 39 | S&F in repairs 100 mm long aluminum anodized barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 40 | S & F in repairs 300 mm size aluminium alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections or cast aluminium alloy complete all as specified and directed. |
| 41 | S&F mild steel 300mm size ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed. |
| 42 | S&F in repair mild steel 300mm size ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed. |
| 43 | S&F in repair Curtain rail stainless steel decorative type 20-25 mm dia including fixing bracket and end knobs complete all as specified and directed. |
| 44 | Dismantling steel work of any description and in any position including doors, gates but excluding framed truss etc complete all as specified and directed. |
| 45 | S&F Framed work as in doors or gates or door frame of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe 290 (Gde E-165) complete all as specified and directed. |
| 46 | S&F Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 47 | S&F galvanized mild steel wire cloth with 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed. |
| 48 | S&F in repair galvanized mild steel wire cloth with 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed. |
| 49 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 50 | S&F 3mm thick Sheet Glass ordinary qulity and glazing with oil putty or wooden beads in square size n.exc 0.5 sqm in each pane complete all as specified and directed. |
| 51 | S&F figured glass, pin head type 3mm thick and glazing with oil putty in square size n.exc 0.5 sqm in each pane complete all as specified and directed. |
| 52 | M&L for repair Aluminum window of any type & any size including all small accessories (like handle, rubber/gaskit, hinges, tower bolt, door stopper etc) Complete all as specified and directed Note : Glass & wire mesh etc shall be paid separately. |
| 53 | S & F Anodised powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors , windows , ventilators, partitions with one or more rebates including jointing cleat for fixing etc complete all as specified and directed. |
| 54 | S & F anodised powder coated aluminium windows, ventillators shutters, fixed type / slidding type, aluminium section weighing not less than 0.55 kg/m including necessary jointing cleats, Glazing clips , rubber neoprene packing, anodised aluminium snap beading screws, locking latches etc complete all as specified and directed. |
| 55 | S & F anodised powder coated aluminium windows, ventillators shutters, side hung type, without sash bars, aluminium sections weighing not less than 0.55 kg/m including necessary jointing cleats, Glazing clips , rubber neoprene packing, anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150mm long (1 No). hinges type B-21, 100mm long (2 no.) suitable handle (1 no.) locking latches etc complete all as specified and directed. |
| 56 | S&F 4.8 mm thick sheet or tinted glass of selected quality in square size not exceeding 0.5 sqm in each pane, fixed to aluminum frame with and including suitable rubber beading complete all as specified and directed. |
| 57 | Cutting holes in brick walls (exc half brick but n. exc one brick) in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 (using 20mm graded stone aggregate) complete all as specified and directed. |
| 58 | Dismentling of wall and ceiling board or insulation board (fibre, pulp, insulation etc) or insulation bpard/slabs/blankets any thickness including cover fillet complete all as specified and directed. |
| 59 | M&L Providing & fixing false ceiling at all heights with 12 mm thic fully perforated micro tegular edged GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of Sleek texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners/ wire, 6mm dia fully threaded hanger rod upto 1 OOOmm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. Main ‘T’ runner to be suspended from ceiling using GI soffit cleats/by using dash fastners to RCC lintel or slabs/ by welding MS cleats of suitable size on truss/purlin/rafters” GI adjustable rods of 3mm dia with galvanized butterfly level clips, spaced at 1200mm c/c along at all heights as per directions complete all as specified and directed. |
| 60 | M&L preparing New steel surface of any description over 10 cm width girth not otherwise describe and applying two coats of synthethic enamel paint over a coat of red oxide primer complete all as specified and directed. Please Enable Macros to View BoQ information |
