|
| 1 | Taking down Chowkats or frames with shutters (Without taking off shutters from the frames) not exceeding 1.5 Sqm each including iron mongries, hold fast etc and including making good disturbed portions of walls in CM 1:4 complete all as specified and directed. |
| 2 | Taking down Chowkats or frames with shutters (Without taking off shutters from the frames) exceeding 1.5 sqm but not exceeding 4.0 Sqm each including iron mongries, hold fast etc and including making good disturbed portions of walls in Cm 1:4 complete all as specified and directed. |
| 3 | Supply and fix powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc.complete all as specified. |
| 4 | S&F Powder coated anodised Aluminium door shutters pull and push type (with or without aluminium sash bars) including necessary jointing cleat, glazing clip, rubber packing anodized aluminium beading, screws, etc and panel inserts of 5mm thick tinted glass/ prelaminated particle board (Novapan) panel in each door and making good of wall surface to match existing surface complete all as specified and directed, comprising of (aluminium anodised section and aluminium anodised fitting as following :-a) Rails (Top & Bottom) of section- 114.30 x 44.45 x 1.49 mm thickb) Lock rail of section- 83.50 x 44.45 x 1.70 mm thickc) Stiles of section- 85 X 44.45mm X 1.40mm thickincluding 2 handles, hinges etc |
| 5 | S&F in repair powder coated aluminium sliding windows frame with movable shutter sliding on minimum two PVC roller of best quality for each shutter on two track and incl 5.50 mm thick glass & stainless steel wire mesh fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below- (i) Window frame :68.4x38mm X 1.15 mm thick for two tracks.(ii) Top/bottom rail and style / rail of shutter : 15x37.5x1.15 mm thick and over (iii) Aluminium beading - 0.7mm thick (iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete. (v) Aluminium fittings such aluminium suitable handle with auto interlock cap with suitable size .(vi) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed. |
| 6 | S&F for in repairs Aluminium body(die cast) door closer hydraulically regulated, designation No. 2 universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg. in repairs |
| 7 | Supply and fix in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed. |
| 8 | Supply and fix Solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube 47x47mm (19 gauge) all as specified and directed. |
| 9 | M&L for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of one side prelam PVC sheet and other side plain pvc sheet. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 10 | S & F in repair Mild steel work in framed work such as grills, gratings,framed guard bars, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 11 | S & F 100 mm long medium weight, cold rolled Stainless steel Butt hinges with screws complete all as specified and directed. |
| 12 | S & F 200mm long Aluminium, anodised, barrel tower bolts of extruded section complete all specified and as directed. |
| 13 | S & F 150 mm long Aluminium alloy handles, cast type, anodised complete all as specified and directed. |
| 14 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) |
| 15 | M&L for 75 mm thick cement concrete, type C 2, 1:3:6 (using 40 mm graded stone aggregate) as in plinth protection and finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 16 | M&L for 25 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in floorings including finishing the surface even and smooth using extra cement complete all as specified and directed. |
| 17 | M&L brickwork with fly ash bricks, straight or curved on plan exc. 6m mean radius built in 1:6 cement mortar including demolition of old brick work complete all specified and directed. |
| 18 | Taking down cement plaster from brick wall/concrete surface including racking out joints hacking for key and scrubbing down with water complete all as specified and directed. |
| 19 | M & L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified. |
| 20 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement with mixing of water proofing compound as per manufacturer’s instructions complete all as specified. |
| 21 | M&L for rendering 5 mm thick in CM 1:3 as on concerete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed. |
| 22 | M & L Galvalised mild steel wire netting of chicken wire mesh 0.46 mm nominal dia of wire & 10 mm mesh size all as spd fixed to wallsroof etc & directed by Engr-in-charge. |
| 23 | M&L for applying two coats of oil bound distempering on newly plastered wall surfcae with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coat of plaster of paris putty of 1 mm thickness complete all as specified and directed. Note-APPLICATION TO BE DONE THROUGH AUTHORISED APPLICATOR OF MANUFACTURER. |
| 24 | M&L for preparation of new plastered walls surfaces and applying two coats of Cement based paint over a coat of plaster of paris putty of 1 mm thicknesscomplete all as specified and directed. |
| 25 | M&L for preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed. |
| 26 | M&L for preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 27 | Material and labour for preparation of new steel and iron surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed. |
| 28 | Demolition of Reinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and direcetd. |
| 29 | Form work to soffits of suspended slabs/chajja/ flat/beam/soffit surface of concrete finished rough surfaces of concrete not exceeding 200mm thick,complete all as specified and directed. |
| 30 | M&L for TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 31 | S&F TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified. |
| 32 | M&L for RCC 1:2:4 type B1 using 20 mm graded stone aggregate as Beams, cantilevers, bressummers, lintels complete all as specified and directed. |
| 33 | M&L for RCC 1:2:4 type B1 using 20 mm graded stone aggregate as in slab supported on wall, beams and columuns in floors, roofs, shelves and stair case etc complete all as specified and directed. |
| 34 | M&L for RCC 1:2:4 type B1 using 20 mm graded stone aggregate as in Chajjas etc complete all as specified and directed. |
| 35 | Supply only liquid water proofing compounding complete all as specified and directed. |
| 36 | M&L for Non - skid Ceramic tiles 7 to8 mm thick area of each tileexceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including M&L for 15 mm thick screed bed 1:6 cement motar including dismantling of floor tiling complete all as specified and directed. |
| 37 | M&L for coloured printed glazed ceramic tiles 7 to 8 mm thick on walls dado/skirting (square/ rectangular) of 350x 250x 7mm/ 450X 350X 7mm jointed and pointed with coloured cement to match over and including M&L for 10 mm thick rendering of cement mortar 1:4, including dismantling of old wall tiling complete all as specified or as directed. |
| 38 | M&L double charged Virified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including M&L for 15 mm thick screed bed in CM 1:6 and including dismantling of existing floor, tiling removing rubbish off the premises complete all as specfied and directed. |
| 39 | All as per serial item as above but as in vertical surfaces over and including rendering M&L for 10 mm thick in cement mortar 1:4, dismantling of existing wall, tiling and removing rubbish off the premises as in backing layer complete all as specified and directed. |
| 40 | S&F 16-18 mm thick granite stone slabs mirror polished of colour and shade as approved by GE, machine cut bedded & jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of granite stone fixed as in steps, jambs, pillars window cills, cooking platforms & the like etc over and including M&L for screed bed of 15 mm 1:6 C:M including dismantling of old existing granite complete all as specified and directed |
| 41 | S & F Rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old unserviceable water tank capacity exc 250 but n exc. 500 litre complete all as specified and directed. |
| 42 | S & F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors including taking up or down of 15mm tubes complete all as specified and directed. |
| 43 | S & F 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors including taking up or down of 20mm tubes complete all as specified and directed. |
| 44 | S & F in repairs 15 mm bore CP Bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. Make : Jaquar, Cat No- CON 037 PM or Cera Cat No. F1005151GG or Kajaria Cat No. KB511004 |
| 45 | S & F in repairs 15 mm bore Chromium plated Angle/Stop valves fency type (straight or angular), cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed .Make - Jaquar Cat No. COP057PM or Cera Cat No. F8040301 or Kajaria Cat No KB811003 |
| 46 | S & F in repairs 20 mm bore gate valve , cast copper alloy complete all as specified and directed. |
| 47 | S&F Ball valves 15mm dia high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15 m m - 2 1 0 g m s ) complete all as specified and directed. |
| 48 | S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union Make- JAQUAR CAT-OHS-35495 or CERA CAT-F7010112MB ,or Kajaria Cat No KA570004 |
| 49 | S&F for in repairs CP Brass Tubular towel rail, 20mm dia, D type, 60cm long between flanges with both side holders Make : Jaquar, Cat No -ACN1111 SM or Cera Cat No F5014103CH or Kajaria Cat No KA990001 |
| 50 | Supply and fix in repair 600mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood on PVC frame complete all as specified and directed. |
| 51 | S & F in repairs Vitreous China Ware Wash hand basin pedestal type, size 550x400mm in repairs including cutting for and pinning ends of brackets including PTMT waste coupling and PVC waste pipe 32 mm dia and PVC connection 450mm long with PTMT nuts and fixed on a pair of MS cantilever bracket of appropriate size complete all as specified and directed. Make-JAQUAR CAT- CNS-WHT-811 or Cera Cat No A2020109 or Kajaria Cat No. BAINES-KS293W. |
| 52 | S&F in repair 15 mm dia brass chromium plated , pillar taps fancy type, cast copper alloy with capstan heads screwed down high pressure screwed for iron pipe with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts or as specified or as directed. Make-JAQUAR CAT- COP-005BPM or CERA CAT-F1005101GG or Kajaria Cat No. KB1011011. |
| 53 | S & F Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers, waste coupling and waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 mm x 460 bowl size 410mm x 330mm x 160mm fixed complete all as specified and directed. |
| 54 | S&F in repair vitreous China Urinal half stall type white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement mortar 1:3 including PTMT spreader, PTMT waste coupling, PVC waste pipe complete all as specified and directed. Make-JAQUAR CAT- URS-WHT-13261H,CERA CAT-S4020112 or Kajaria Cat No. RASSO-KS507. |
| 55 | S & F in repairs Vitreous China water closet Padestal pattern white, including mild steel chromium plated or aluminised hinging device seat cover size 630x450 mm size white with Cast Iron `P' or `S' trap, front or back inlet and including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including lime concrete bedding complete including making good to floor all as specified and directed. |
| 56 | S & F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified Make Jaquar Cat No – ALD -565 or Cera Cat No F8030109AB or Kajaria Cat No KA580009 |
| 57 | S & F in repairs Vitreous China Squatting pan of Orissa pattern, size 580x440 mm size white with integral foot rest with Cast Iron `P' or `S' trap, front or back inlet and including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including lime concrete bedding complete including making good to floor (excluding flushing cistern and flush pipe)all as specified and directed. |
| 58 | S & F in repairs 10 litres PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including 32mm PVC pipe for low level cistern L type, brackets fixed on wall complete all as specified and directed .Make : Parryware Cat No. E8090 or Cera Cat No. B1010102 or Kajaria Cat No. KAMEA-K01002. |
| 59 | S&F PVC connections 15mm size with PTMT nuts of length 450mm. Make Pearl WC181 , Prayag -PTA-68 Jaynam -CNP--104 |
| 60 | S&F in repair fancy type glass corner 300mm radius of 10mm thick toughned glass with railing fixed with fancy type screws complete all as specified and directed. Make : Jaquar, Cat No -ACN -1173 or Cera Cat No F5005103 or Kajaria Cat No KA980014 |
| 61 | S & F 110 mm bore PVC (SWR) Soil, waste and vent, rain water pipes, drain pipe single socketed in any length with rubber ring joints fixed on walls including Taking down eaves gutters and rainwater pipes (any size or pattern AC/PVC/CI), including all fittings, heads, shoes, bends, swan-necks, etc., complete all as specified and directed. |
| 62 | S & F 75 mm bore PVC (SWR) Soil, waste and vent, rain water pipes, drain pipe single socketed in any length with rubber ring joints fixed on walls including Taking down eaves gutters and rainwater pipes (any size or pattern AC/PVC/CI), including all fittings, heads, shoes, bends, swan-necks, etc., complete all as specified and directed. |
| 63 | S & F 110 mm borePVC (SWR) bends any radius complete all as specified and directed. |
| 64 | S & F 75 mm borePVC (SWR) bends any radius complete all as specified and directed. |
| 65 | S & F PVC (SWR) junction single,75 mm (Single T) equal or unequal complete all as specified or as directed. |
| 66 | S & F PVC (SWR) junction single,100 mm (Single T) equal or unequal complete all as specified or as directed. |
| 67 | S&F in repair PVC Nahani trap with grating 110mm x 75mm or as per site requirement complete all as specified and directed |
| 68 | Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed. |
| 69 | S & F in repairs 4mm thick E-Board tiles for insulation and acoustic purpose of size 600x 600mm fixed with and including anodised GI prepainted snap grid with 25x25x1.5 mm thick Tee section and 38x25x2 mm thick angle with hanging/supporting arrangements as in false ceiling at bottom at spacing 60 cm centre to centre including necessary GI cleats and 4mm dia GI wire as suspender fixed to ceiling not exceeding 1.20 mtr centre both ways with dash fastners complete and making good disturbed surfaces including taking down old ceiling complete all as specified and directed. |
| 70 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 71 | S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / clading to wall, fixed with self tapping screws as specified. Complete all as spd and directed. |
| 72 | S&F Steel work in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, hollow circular section or flat sections ) including distance pieces, cleats, nut bolts etc complete all as specified and directed. |
| 73 | S&F in repair 25 mm dia SS fancy type droppery rod with decorative design matching brackets as approved and knobs (lattu) or end bracket as required incl fitting with 80 mm long SS screw with 75 mm long wooden gitty of appropriate size in each end & intermediate support complete all as specified and directed. |
| 74 | M&L for redering on roof, veticle surfaces of mortar, 15 mm thick, in cement mortar 1:4, over RCC roof slabs for laying water proofing treatment mixed with using water proofing liquid @ 150 ml per bag of cement including application of cement slurry over existing roof surface @ 3 Kg/Sqm complete all as specified and directed.Note:- Water proofing liquid shall be measured and paid separately. |
| 75 | M & L APP polymeric water proofing membrane, minimum 3 mm thick and weight 4 kg per Sqm with mineral, minimum 3.5 kg per Sqm without mineral weight tochshield membrane/equivalent with rich bitumen and select polymers blended together to obtain excellent heat resistance & cold resistant black finish reinforced with non-woven polyester matt, with a thermo fusable finish laid over compatible bitumen primer at the rate of 0.50 Kg/Sqm (i) Torching overlaps with a propane or a butane gas torch, with a overlap of 100 mm and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer’s instructions complete incl removal of existing treatment all as specified and as directed. |
| 76 | 'Surface excavation in soft /loose soil n. exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out complete all as specified |
| 77 | Removing surplus excavated materials (SOIL) to distance not exceeding 50 m and depositing where directed at a level n. exc 1.50 m above the starting point complete all asspecified and directed. |
| 78 | M & L 100 mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in sub base, Floors, Paving, finished even and fair complete all as specified and directed. |
| 79 | M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 80 | M&L for Machine pressed Precast cement coloured concrete, factory made coloured glazed interlocking paver block any shape and size conforming to IS 15658 -2006 of 60mm thickness, M-35 Grade, pattern and colour with grey cement & pigment complete all as specified and directed. |
| 81 | Taking down carefully aluminium point wiring any type including battens if any except for ceiling or where not feasible for light/ fan//bell/socket or power and including unscrewing from board, fitting and fixture such as switches,socket, ceiling rose,lamp holder,pendants, bracket and regulator etc and removing material from site including making good disturbed surface to match with the existing surface complete all as specified. |
| 82 | Taking down carefully UNSV main switch DBs of any description of an size in any position complete all as specified. |
| 83 | Material and labour for point wiring with single core FRLS 1100 volt grade cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, with all conduit accessories, screws (concealed conduit wiring in walls and casing capping on ceiling or roof) including metal box suitable for modular fittings and covered with modular plate and cover of suitable size with new brass screws for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC sheathed 1100 Volts grade cable with stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified for:- |
| 84 | (a) All as per item 85 here in before but One light / fan/ exhaust fan point controlled by one switch. |
| 85 | (b) All as per item 85 here in before but One 5 pin 5 Amp switch socket out let point on an independent board. |
| 86 | (c) All as per item 85 here in before but One 5 pin 5 Amp socket out let point controlled by one switch on same board. |
| 87 | All as per item 85 here in before but for one 15 Amp 6 Pin switch socket out let independent with 2.5 Sqmm FRLS (Nominal Area) PVC unsheathed copper conductor single core multistranded incl 2.5 sq mm FRLS PVC copper conductor single core used as earth continuity conductoe complete all as specified.complete all as specified. |
| 88 | S & F Modular switch one way 6 A, 1 Module complete all as specified and directed by the Engr-in-Charge. |
| 89 | S & F Modular switch one way 16 A, 1 Module complete all as specified and directed by the Engr-in-Charge. |
| 90 | S & F Modular Socket 6 Amp, 3 Pin combined 2 Module complete all as specified and directed by the Engr-in-Charge. |
| 91 | S & F Modular Socket 6/16 Amp, 2/3 Pin combined 2 Module complete all as specified and directed by the Engr-in-Charge. |
| 92 | S & F Modular fan regulator Step up type, 120 Watt, 2 Module complete all as specified and directed by the Engr-in-Charge. |
| 93 | Supply and Fixing ceiling rose PVC / Poly carbonate, Isolated body, three terminal AC 230 volts complete all as specified and directed. |
| 94 | S&F in replacement LED mirror light fitting of 1 x 10 watt LED batten with aluminium housing with all accessories prewired suitable for wall /surface mounting complete with connection all as specified and directed. |
| 95 | S&F in replacement LED mirror light fitting of 1 x 20 watt LED batten with aluminium housing with all accessories prewired suitable for wall /surface mounting complete with connection all as specified and directed. |
| 96 | Supply & Fixing security light fitting, LED type, 25 Watt, 6000 K, pressure die cast housing with prismatic polycarbonate diffuser & indvl LEDs as light source with integrated electronic driver complete with M&L GI pipe mounting bracket of size 25/32 mm dia and 1.20 m long fixed to wall with and including nut, bolts and GI clamps of size 50 x 6 mm as required including two coats of synthetic enameled paint over a coat of primer and making connection with three core 23/.0076 rubber insulated copper cable from ceiling rose to connector of street light complete all as specified and directed. |
| 97 | Taking down carefully ceiling fan from existing site and doposited in MES yard for BER in coming BOO all as directed by Engineer-in-Charge. |
| 98 | Supply and fixing ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 99 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed. Please Enable Macros to View BoQ information |
| 100 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed. Please Enable Macros to View BoQ information |
