|
| 1 | Reinforced cement concrete.work in beams, suspended floors, roofs having slopiing up to 15 landings, balconies, shelves,chajjas, lintels ,bands, plain window sills,stairca5es and spiral styair cases above plinth level up to floor five level, excluding the cost of centering shuttering. finishing and reinforcement, with I: 1.5:3 ( I cement : 1.5 coarse sand (zone-111):3 graded stone aggregate 20mm nominal size). |
| 2 | Providing designation 125 mm thick reinforcement designtion 75 A brick work with in C.M. (1:4) in supertructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including cost of screening materials scaffoliding raking out joints to 15mm depth curing taxesand royalty ( but excluding theb cost of reinforcement) all complete as per building specification and direction of E/I. |
| 3 | Providing and laying Doublecharge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm . |
| 4 | Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) -do- -do- all complete job.With \\" A \\" grade White 15 X 15 cm Tiles |
| 5 | Providing and fixing 18 mm thick gang saw cut, mirror polished. premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills. facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar I :4 ( I cement : 4 coarse sand). joints treated with white cement mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and olishing to edges to give high gloss finish etc. complete at all levels Granite stone slab colour black, Chery/Ruby red Area of slab over 0.50 sqm Granite |
| 6 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc complete as per design approved by Engineer-in-Charge.Granit work |
| 7 | Providing Tor steel reinforcement of 8 mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to works site, cutting. bending and binding with unneah!d wire with cost of the wire, removal of rust, placing the road in position ull comlete as per building specification and direction of E/1. TMT Fe 500 ( only valid for SAIL & TATA STEEL) |
| 8 | Providing Tor steel reinforcement oil 10mm , 25 mm, 32 mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to works site, cutting. bending and binding with annealed wire with cost of the. wi.re, removal of rust. placing the road in position all complctc as per building specification and direction of E/1. TMT Fe 500 ( only valid for SAIL & TATA STEEL) |
| 9 | Providing and fixing fan hook of 16mm dia M.S. bar 1 metre long bent to required size and shape, placed in position and fixed in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/l. (where material is not supplied by deptt.) |
| 10 | Supplying, fitting, and fixing M.S. Grill made of 20X6mm M.S. Flate as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. (where materials is not supplied by the deptt.) |
| 11 | Supplying fitting and fixing 20 gauge G.C.I sheet gate fitted on M.S.angle frame of size 60 x60 x6 mm including fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C (1:2:4) blocks of required size applying a priming red lead paint over steel works taxes, all complete as per building specifications and direction of E/I. |
| 12 | Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning removing dirt, scales, grease and sand papering, including cost of scaffolding etc. all complete as per building specification direction of E/I. |
| 13 | Providing two coats of synthetic enamel paint of approved shade and make over steel surface grills & railings including cleaning the surface thoroughly scaffolding and taxes all complete as per building specification and direction of E/I. |
| 14 | Centering and shuttering including strutting , propping etc. and removal of form for. Slab,suspended floors, roofs, landings, balconies and access platform and taxes all complete as per building specification and direction of E/I. |
| 15 | Providing 12 mm cement plaster ( I :6) with clean coarse sand of F.M. 1.5 including screening. curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/1. |
| 16 | Providing and applying white cement based putty of average thickness I mm, of approved brand and manufacturer, over the plastered wall surface to lnrenare the surface even and smooth complete. |
| 17 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by the rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/1. |
| 18 | Providing and fixing 18 mm thick both sides Pre-laminated cement bonded wood particle board as per IS : 15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes, shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge (Note: Fittings to be paid separately) |
| 19 | Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge 200 mm |
| 20 | Telescopic drawer channels 300 mm long |
| 21 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular switch, modular plate, suitable GI box etc as required.Group- A |
| 22 | Wiring for light / Power plug with 2 x 4 Sq. mm FRPVC insulated copper conductor single core cable in surface/recessed PVC conduit alongwith 1 no. Sq. mm FRPVC insulated copper conductor single core cable for loop earthing as required |
| 23 | Wiring of Circuit Sub-main Wiring along with earth wire with the following sizes of PVC insulated copper conductor single core cable in surface of recessed PVC conduit as required.2 x 1.5 Sq.mm + 1 x 1.5 Sq. mm earth wire |
| 24 | Wiring of Circuit Sub-main Wiring along with earth wire with the following sizes of PVC insulated copper conductor single core cable in surface of recessed PVC conduit as required.2 x 2.5 sq mm + 1 x 2.5 sq mm earth wire |
| 25 | Supplying and fixing of following sizes of PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm dia |
| 26 | S/F of following , following 240 volts, 'C' series, miniature circuit breaker suitable for inductive load of following pole in the existing MCB DB complete as reqd.6/32 amps, Single pole |
| 27 | S/F following rating,double pole 240 volts, isolator in the existing MCB DB complete ………… … …. as reqd. |
| 28 | Supplying and fixing 2 pin 5 amp. Ceiling rose on the existing junction box/wooden block as reqd. |
| 29 | Supplying and fixing batten/ angle holder including connection as reqd. |
| 30 | ITC of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm. FR PVC insulated copper conductor as reqd. |
| 31 | Supplying 48\\" dia. Sweep celling fan with eloctronic regulator of any ISI make including connection with 1.5sq.mm. Copper wire drawn of the roof including taxes, carriage to worksite etc. all complete job. |
| 32 | 12\\" (300 mm) metal exhaust fan |
| 33 | 15\\" (380 mm) metal exhaust fan |
| 34 | Supplying & fixing of holder type LED 15/16W bulb of any ISI make including taxes, carriage to worksite etc. complete job. |
| 35 | Suppolying and fixing metal box of the following sizes in recesses with suitable size of pohonic laminated sheet cover front including painting etc. as required. 210 mm x 206 mm x 48 mm(10\\"X12\\") |
| 36 | 75 mm x 75 mm x 50 mm (4\\"X4\\") |
| 37 | Supplying and fixing following modular type switch/ socket on the existing switch box/ cover including connections etc. as required.5/6 A switch |
| 38 | 3 pin 5/6 A socket outlet |
| 39 | 15/16 A amp switch |
| 40 | 6 Pin 15/16 A socket outlet |
| 41 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.15 mm dia nominal bore CPVC Pipe |
| 42 | 25 mm dia nominal bore CPVC Pipe |
| 43 | Supply and fixing G.I. fittings of approved make all complete as per direction of E/I. ELBOWS -15 mm dia. |
| 44 | ELBOWS - 25 mm dia. |
| 45 | TEE PLAIN -25 mm dia. |
| 46 | REDUCING SOCKET - 25 mm dia. |
| 47 | NIPPLE - 15 mm dia. |
| 48 | NIPPLE - 25 mm dia. |
| 49 | UNION SOCKET - 25 mm dia. |
| 50 | Providing and fixing male-ended 15 mm dia Brass Bibcock of approved quality (wt. Not less than 350 gm.) With extra socket all complete as per specification and direction of E/1. |
| 51 | Providing and fixing 15 mm dia male-ended Brass. Stop cock (wt. Not less than 400 gms. ) of approved quality with extra socket all complete as per specification and direction of E/1. |
| 52 | Providing and fixing Gun metal full way valve of approved quality all complete, as per specification and direction of E/I.a) 25 mm dia and weight not less than 500grms- |
| 53 | Making holes in walls for laying UPVC pipes and restoring the same after pipe laying as per specification and direction of E/1. a) 125 mm thick wall |
| 54 | Providing and fixing stainless steel kitchen sink with CI brackets and steel plug 40 mm with painting wherever required: Size 610 x 460 x 200 mm |
| 55 | Supplying fitting and fixing vitreous white glazed earthen ware wash hand basin of Perry of Hindustan or any other ISS approved make supported on painted C.I. or RS Brackets 32mm C.I. brass waste 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grams 32mm PvC waste pipe 750mm long with brass coupling at one end and making plumber joints etc all complete as per specification and direction of E/I |
| 56 | Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 m including all lifts, levelling ,ramming the foundation trenches, removing roots of trees, serbs all complete as per approved design,building specification & direction of E/I. |
| 57 | Providing coarse clean sand in filling in foundation trenches or in plinth including thick with all leads and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specifi cation and direction of E/I. (Mode of measurement compacted voume) |
| 58 | Providing designation 75B one brick flat soling joints filied with local sand including cost of watering taxes royalty all complete BS per Building specification and direction of E/I |
| 59 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size) |
| 60 | Providing 250mm thick brick jali work in C.M. (1:8) in superstructure with designation 75A brick and approved quality of clean coarse sand of F.M. 2 to 2.5, finished with deep ruled pointing in C.M. (1:3) with sand of F.M. 1.5 on entire surface including the cost of finished the holes, screening carriage of materials, scaffolding, raking out joints to 15 mm depth, curing taxes and royalty all complete, as per approveddesign, building specification and direction of E/I. |
| 61 | Providing designation 75B work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.m. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials ranking out joints to 15mm depth, curing taxes and royalty all complete as per building specification and specification and direction of E/I. |
| 62 | Providing following materials as filter media in the pit of approved quality & size in layers as per drawing and direction of engineer in charge all complete job with all taxes and royalty all complete as per building specification and specification and direction of E/I.(a) Agreegate 63 mm to 45 mm) M-008 |
| 63 | (b) Agreegate 53 mm to 22.4 mm) M-007 |
| 64 | (c) Agreegate 10 mm to 5 mm) M-010 |
| 65 | Providing Precast R.C.C M-200 with nominal mix of (1::4) slab of desired size with approved quality of stone chips 20 mm to 6 mm size graded & clean coarse send of FM 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer & placing in position, vibrating, striking, curing (but excluding the cost of reinforcement), taxes & royalty all complete as per building specification & direction of E/I. |
| 66 | Providing 12mm coment plastar (1-6) with cleen coarse sand of F M 1.5 including scrooning curing with all leads and lifts of water, scaffoliding taxes and roylity all complete as per building specification and dueection of E/I |
| 67 | Supplying materials and construction of brick masonry drain 150 mm width and 150mm depth with 250mm apron on both sides over 50mm thick P.C.C (1:3:6) over a brick flat soling, apron laying brick work in C.M (1:6). 12mm cement plaster (1:3) with punning on exposed surface all complete job as per specification and direction of E/I. |
| 68 | Providing two coats of snowcem of approved make & shade over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper, scaffolding , curing and taxes etc. all complete as per building specification direction of E/I. |
| 69 | Cost of Drilling 200 mmx165mmx90 mtr.deep bore well in all kind of Soil and rock in rural area for installation of pump set with Hydraulic DTH Rig machine all complete including all materials, tools,driling rig,air compressureand equipmentsas well as fule, lubricantsand cost of transportation of rig machine annd other vehical up toSite.(a) From 0.00 M to 50.00 M below G.L. |
| 70 | (b) From 51.0 M to 250 M |
| 71 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.200 mm nominal size dia |
| 72 | Supplying all tools. Equipments and labour and doing wasting. Flushing and development of drilled tube well to give clean and clear water all complete as per direction of E/I. |
| 73 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:200 mm dia |
| 74 | Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.200 mm clamp |
| 75 | Supplying submersible pump sets confirming to IS 8034 and motor confirming to IS 9283. Pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/ noryl impeller. Motor suitable for working on 415V+10%, 3PH, 50 Hz, A.C. supply with cable guard, thrust carbon/ fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. The pump set shall be suitable for direct coupling. Pump shall have suitable outlet as per manufacturers design. Anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/ double run shall be provided with each pump. Submersible pump set 100mm dia (with Polypropylene/Noryl Impeller) up to 20 stages1.5 HP |
| 76 | Supply fitting and fixing of standered make starter pannel Board with arrangement of all necsssury protection including all taxes ,royalty etc all complete job as per direction of E/I. |
| 77 | Supplying fitting and fixing 3 core 4 sqmm Flat copper submersible cable FINOLEX / HEVELS make including all taxes ,royalty etc all complete job as per direction of E/I. |
| 78 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.32 mm nominal outer dia Pipes |
| 79 | Supply fitting and fixing G.I.Pipes (TATA Mark or Equivalent) asper IS-1239(part-01/ 2004 ISI marked Medium Qulaity all complete job as per direction of E/l. (V) 40 Mm Dia |
| 80 | Supplying all tools, equipments and labour and lowering 32 mm dia medium quality G.I. pipe in drilled tube well in 3 Mtrs. Length all complete as per dirction E/1 including carriage of materials E/I.(Basic Rate |
| 81 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 82 | Carriage of materials to worksite by any mechanical means including loading at querrysite / godown and unloading at worksite including all taxes, cost of labour, fuel, lubricants etc. all complete as as per building specification and direction of E/I.I. Cement Lead (10Km) |
| 83 | II.) Sand Lead (35) KM. |
| 84 | III) Stone Chips Lead (55)KM. |
| 85 | IV.) Bricks Lead (25) KM. |
| 86 | CP PLUS 2MP (1920 x 1080 Pixel) or Better Bullet Camera (CP- UNC- TA21L6CQ)) (Product Id:- 5116877-515802363340)Rate are Taken By GEM Portal |
| 87 | CP PLUS 2MP (1920 x 1080 Pixel) or Better Dome Camera (CP- UNC- DA21L3B-LQ) (Product Id:- 5116877-45582719641) Rate are Taken By GEM Portal |
| 88 | CP PLUS 32 Channels NVR with 4k (3840 x 2160(CP-UNR- 4K4322 _ V3) (Product Id:- 5116877-79854609749) Rate are Taken By GEM Portal |
| 89 | Toshiba/ Western Digital Windows Surveillance Hard Disk (WD8001PURP/ HDWT380UZSVA) (Product Id:- 5116877-139299919872) Rate are Taken By GEM Portal |
| 90 | PCI Wires --PCI Infra Projects Private Limited XLPE Cable 1.5 Sq. Mm 3 cores (3C x 1.5 Sqmm CU Cable) (Product Id:- 5116877-37451030680) Rate are Taken By GEM Portal |
| 91 | Unbranded Stainless Steel Kick Plate Mounting Bracket Mounting Place (Clip) (Product Id:- 5116877-12834942189) Rate are Taken By GEM Portal |
| 92 | Samsung 1 Star Led (Light Emitting Diode Ultra HD (3840 x 2160) TV(Samsung BE43FX-H2 (H43BEFH 8GULXL))) (Product Id:- 5116877-66188731858)Rate are Taken By GEM Portal |
| 93 | Aquaguard Reverse Osmosis based WaterTreatment System with Filteration capacity Above 100 LPH and Upto 250 LPH (Aquaguard Pro Thermapure 120 PSS RO ACH uv + CuZn) (Product Id:- 5116877-45729731521) Rate are Taken By GEM Portal |
| 94 | HINDWARE /KAFE WALL Mount Baffle Filter T-Shapped Kitchen Chimney (Hindware /KAFE (ASHPRO BLDC-90-DC 90CM 1200 Chimney)(Product Id:- 5116877-2153717180) Rate are Taken By GEM Portal |
| 95 | Add 18% GST ( For Sl. No 1 to 85 ) |
| 96 | Add 1% LC |
| 97 | Add Signboard & Photography Please Enable Macros to View BoQ information |
