|
| 1 | Taking down cement plaster from old brick / stone masonry walls etc. including racking out joints, hacking for keys and scrubbing down with water complete all as specified and directed. |
| 2 | Material and labour for 15mm thick rendering in cement mortar 1:4 on external surface of brick wall or concrete surfaces finished even & smooth without using extra cement mixed with WPC as per manufacturer’s instruction, complete all as specified and as directed by Engr-in- Charge. Note:- WPC shall be measured and paid separately under respective items of BOQ |
| 3 | Supply only liquid water proofing compound, complete all as specified and directed. |
| 4 | M&L for preparation of old distempered surfaces of walls including washing, rubbing down and stopping of nail holes and applying one coat of oil bound distemper (oil emulsion) on walls complete all as specified and directed. |
| 5 | Material and labour for 10mm thick rendering in cement mortar 1:6 on internal surface of brick wall or concrete surfaces finished even & smooth without using extra cement, complete all as specified and directed |
| 6 | Material and labour for 5mm thick rendering in cement mortar 1:3 on ceiling surface finished even & smooth without using extra cement complete all as specified and directed. |
| 7 | M&L for complete removal of existing treatment of walls plastered or unplastered, washing, rubbing down and stopping of painted surfaces etc complete all as specified and as directed |
| 8 | Material & Labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade. (Company Depot Tinted) with silicon additives@ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed |
| 9 | Material & Labour for preparation of old surfaces and applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per 15 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43 litre / 10 sqm over new surfaces, complete all as specified and directed |
| 10 | M&L for preparation of newly plastered surfaces and applying two coats of oil emulsion distemper on walls over a coat of alkali resistant priming, complete all as specified and directed |
| 11 | M&L for one coat of synthetic enamel paint on stone, conrete, asbestos cement or plastered surfaces of any description over 10 cm girth or width, not other-wise described including preparation of old decorated surfaces, complete all as specified and directed. |
| 12 | M&L for preparation of old plastered or previously untreated surfaces of wall and applying one coat of Camourlaging (Antifungal) paint for any height of buildings with necessary scaffolding with safety measures complete all specified and directed |
| 13 | M&L for preparation of old/ Interlocking / floor / hard standing surface of any descriptions and any position & applying one coat of floor guard paint over a coat of external primer complete all as specified and directed |
| 14 | M&L for preparation of old plaster surfaces over 10cm width or girth not otherwise described and applying one coat of plastic emulsion paint complete all as specified and directed |
| 15 | M&L for french polishing on surface of any description, width or girth including cleaning and preparing the surface and applying a coat of wood filler on old / new works including with one or two coats of French polish, complete all as specified and directed |
| 16 | Demolition of RCC slab, beam, chajja, old water tank (other than ground floor) beams staircases, and similar articles complete all as specified and directed by Engr-in-Charge |
| 17 | M&L for providing and applying wall care putty of 1mm thick over plastered surface by rubbing down with sand paper and make surfaces even and smooth, complete all as specified and directed. |
| 18 | M&L for preparation of old surfaces of walls including cornices, pillastersetc and applying one coat of white wash on walls surfaces, complete all as specified and directed |
| 19 | M&L for preparation of old surfaces of ceilings including cornices, etc and applying one coat of white wash complete all as specified and directed |
| 20 | M&L for preparation of new plastered surfaces and applying three coats of white wash on ceilings, complete all as specified and directed. |
| 21 | M & L for providing water proofing treatment to old decorated surfaces of exterior wall by wire brushing in order to remove dust, dirt, loose particles, laitance etc. complete. Thereafter wash the surface with clan water & allow to dry. Fill visible cracks / joints by chemistic crack seal caulking compound & allow to dry for 24 hours. Apply a primer coat of chemistic prime M Seal (water base primer) and allow to dry for 6 hours. Thereafter apply 02 coats of chemistik PDS-50 (WB high build anti caronatin coating cum waterproofing) & shade by brush at the interval of 08 hours between the coat and allow to dry to match the existing shade including with necessary scaffolding & other safety measures etc. for any heights of buildings etc complete all as per specified and directed |
| 22 | Separating, scraping and cleaning of reinforcement (Demolition of concrete measured separately) complete all as specified and directed by Engr-in-Charge |
| 23 | M&L for reinforced cement concrete 1.1.5:3 type A0 using 12.5mm graded crushed stone aggregate as in repairs work in small patches and narrow width, including necessary formwork and scaffolding in wall, column, slab, beam, chajja and similar works for any height of building with necessary safety measures complete all as specified and directed. |
| 24 | M & L for injection chemical GLYPHOSPHATE (4% Each Concentration) of 20 ml or till refusal by making cut/injection in the stem of plant of roots at 30 mm and spraying with solution 25 ml GLYPHOSPHATE (4% concentration diluted with 1 ltr of water) and removing the Plant / vegetation of following girth including penetrated roots complete including necessary scaffolding etc for plants / vegetation of size 0-20 cm girth complete all as specified and directed for buildings up to and including 4 storeys. |
| 25 | S&P 600x200mm size metallic / acrylic board (Eg: BLDG NO P-0015) fixing with SS screws (3 inch) to the existing wall, and making good to the disturbed surface (Work has to be executed at any height of building) including bldg No & name complete as directed by Engr-in-Charge |
| 26 | M&L for preparation of old wooden surfaces over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed |
| 27 | M&L for preparation of old surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coats of synthetic enamel paint, complete all as specified and directed |
| 28 | M&L for preparation of old surfaces of steel or iron surfaces of any description, not exceeding 10 cm width or girth, not otherwise described and applying one coats of synthetic enamel paint, complete all as specified and directed |
| 29 | M&L for preparation of old painted surfaces and applying one coat of cement base paint on walls complete all as specified and directed Please Enable Macros to View BoQ information |
