|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GE NEW DELHI Name of Work: REPAIR TO ROOF, FLOOR, WALL AND OTHER CONNECTED WORKS AT ELECTRIC SUB STATIONS AND PUMP HOUSE OF AGE EM NEW DELHI UNDER GE NEW DELHI Contract No: GE/ND-04/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Rates only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sch. itemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Dismantling floor hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and directed. |
| 3 | M&L for Virified Ceramic tiles light colour 7-8mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick cement screed 1:6, complete all as specified and directed. |
| 4 | All as per item No 02.00 above but on vertical surfaces over and including 10 mm thick plaster in cement mortar 1:3 complete all as specified and directed by Engr in charge. |
| 5 | M&L for joint free glazed ceramic coloured tiles in vertical surface 350 x 250 x 7 mm or 450 x 350 x 7 mm thick with matching highlighter over and including 10 mm thick rendering in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or colour cement to match coloured tiles (Design/colour of tiles will be approved by GE) complete all as specified and directed. |
| 6 | M&L for 22-25 mm thick heavy duty chequerd parking tiles 400x400 mm of any pattern decided by Engr in charge as in pavings laid over 20 mm thick screed bed 1:4 laid and jointed with cement slurry mixed with pigments to match the shade of tiles complete all as specified and directed. Make Johnson/kajaria/somany |
| 7 | M&L for 10-12 mm thick heavy duty parking tiles 400 x 400 mm of any colour and pattern decided by Engr-In-Chargeas in pavings laid over 20 mm thick screed bed 1:4 set jointed with cement slurry mixed with pigments to match the shade of tiles complete all as specified and directed.Make : Johnson / Kajaria / Somany |
| 8 | M&L for Non skid coloured ceramic tiles 7-8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engr in charge.Make :- Somany or equivalent in Kajaria/Johnsion |
| 9 | M&L for cement concrete 25 mm thick in PCC type B1,1:2:4 (20 mm graded aggregates) as in sub base of floors finished fair and even complete all as specified and directed. |
| 10 | Taking down chowkhat or frame exc 1.5 sqm and n-exc 4 sqm each but with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 11 | Taking down chowkhat or frame n exc 1.5 sqm each but with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 12 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 13 | S&F Framed work for ornamental and intricate design such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290. Gde-E-165 making good of dismantled portion by plastered/ concrete work and match with existing surface complete all as specified and directed. |
| 14 | S&F 35 mm thick flush shutter solid core constn with block board core and plywood face panels, commercial type on both sides, supplied and fitted to chowkhats including taking down old unsv shutters of any size complete all as specified and directed. |
| 15 | S&F Solid PVC Door Frame of size 50mm x 95 mm made out of 5mm prelam PVC sheet and edges will be painted to match with prelam sheet, reinforced with MS sqare tube used as per specifications and drawings incl fasteners and make good the damage portion complete all as specified and directed. |
| 16 | S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick prelam Moulded PVC Sheet on the front face 2mm thick plain PVC sheet on back face to be fixed on frame at site as per specification & drawing complete all as specified and directed. |
| 17 | S&F 200 mm Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 18 | S&F 150 mm Extruded aluminium alloy handles, fabricated type., anodised complete all as specified and directed. |
| 19 | S&F Butt hinges in 100 mm Size, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 20 | S&F Floor door stopper 140mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring, complete all as specified and directed by Engr in charge. |
| 21 | S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed. |
| 22 | S&F glazed and gauzed three track aluminium powder coated sliding window of any size made out of Jindal extruded aluminum window classic 18mm series as mentioned below and glazed with 5 mm thick glass fixed with rubber beading/gasket and GI fly prrofing and aluminiun powder coated beading all around and lock type handle of size 75mm etc complete all as specified and directed:- (a) outer Frame with rectangular section -14035, frame bottom with section 20957 and frame top and sides with section-20958 (b) Shutter : top and side with section-20606 , interlocking with section-20605 and bottom with section-20604, including make good of dismantled portion complete all as specified and directed. |
| 23 | S&F aluminium window as per TD Drg No CEDZ/TD-316 with following specification : (i) Outer frame of size 40mmx114mm with 1.mm thickness, corner 45 degree cut & aluminium welded (ii) Centre mullion of size 40mm x65mm (iii) Welded shutter (02 Nos) of size 40mmx60mmx1.3 mm thickness 45 degree cut mechanically joint with 6mm allen key boult clamp with 5mm clear glass both side EPDM rubbe gasket metal body hand layer type single point lock, aluminium kobra hinges 2 No per shutter. (iv) 12mm ss 202 grade round bar . (v) Welded wiremesh sutter (2 Nos)of size 40mmx18mmx1.3mm thickness 45 degree cut with 0.45mm nominal dia of SS wire mesh, SS 75mm long hinges & PVC magnet. (vi) Entire window shall be power coated with pure polyster coat of any shade as approved by GE. (vii) window shall have provision of for installtaion of window AC/ Desert cooler and provision of window glass shutter, wiremesh, grill and necessary fittings and locking arrangement for subject portion will be modified as per ground requirement during the execution as per directions of Engr-in-Charge. (vii) Window shall be installed with silicone complete all as specified and directed by Engineer in-Charge. |
| 24 | S&F aluminium ventilator of outer frame 40mmx114mm with 1.3mm thickness corner 45 degree cut & aluminium welded centre mullion size 41mmx65mmx1.3mm thick partly glazed /guazed including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws,MS wire mess, 5 mm thick frosted glass etc with provision for fixing the exhaust fan (if required) complete all as specified and directed by Engr in charge.Note: glass shall be measured and paid separately |
| 25 | Dismantling water tanks exc 500 ltr and n.exc 1000 ltr and removal from site complete all as specified and directed. |
| 26 | S&F Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 1000 Ltrs Including making connection for inlet & outlet with connection piece complete all as specified and directed. Make : Prayag/ Sintex/Vectus |
| 27 | S&F in repair ball brass valves high pressure with polythene float & flynut complete screwed for Iron pipe or brass ferrule of 20 mm dia and fixed complete all as specified and directed. |
| 28 | S&F in repair 20 mm bore gun matel globe or gate valves with iron wheel, screwed both ends for iron pipes complete all as specified and directed. |
| 29 | Taking down cement plaster of any description on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed. |
| 30 | M&L for prepration of brick or concrete surface clean and free of dust,oil,paint,loose particals,dimoldimg agents,organic products etc and applying 15mm thick exter surface treatement as in 2 layer [10mm base layer and 5mm final layer] as under:- [A]base coat [10mm thick]:-Apply in 1 or more coat to achieve average 10mm thick of water vapour per meable mortar,unofin classic base coats render or equivalent brand of make sikka,fosroc for weather resistant and high performance facades with csiv commpressive strength,flexural strength > 2.5 N/mm2 and water vapour permibility < 15micron as per EN 998-1 and finished even and rough marks to anchore with final layer it should be includes the rain forcement of weaker points / areas [change in the subtract material,slab,pillars/rollar blind boxes around the opening/windows,doors etc] with fibre glass mess to avoide cracks as per manufacturers recomndation or as per direction of engr-in-charge [B] Final layer [5mm thick]:-Finishing with rainwater resistantand water vapour permeablerendring mortar,UNOFIN PRIME COARSE render or equivalent brand of make sikka,fosroc for weather resistant and decorative facades with CSII commpressive strength,flexural strength > 2.5 N/mm2 and water absoptionas W2 (C<0.2Kg/m2.min 0.5) water vapour permibility < 15micron as per EN 998-1 all as per manufacturers recomndation or as per direction of engr-in-charge Note: 1. Size and specification of fibreglass mesh shall be as per manufacturersrecommendations. 2. Contractor shall be provide authorised applicatore and no exter cost shall be provide in this account. |
| 31 | M&L for 1 to 1.5mm thick of one coat of Texture JK Maxx Rustic tex finish or equivalent brand make of Asian paints or Berger on level surface of internal staircase walls, landings, beams, columns, etc. as per design or pattern directed including necessary scaffolding/ladders with all safety accessories complete all as specified as directed by Engineer in charge. |
| 32 | M&L for rendering 15mm thick in Cement Mortar 1:4 on fair faces of brick or concrete, external surfaces of walls finished and even & fair without using extra cement ntegral water proofing compound as per manufacturere's instructions (water proofing compound shall be measured and paid seperately) complete all as specified and directed. |
| 33 | M&L for rendering 15mm thick in Cement Mortar 1:6 on other than fair faces of brick surfaces of walls finished the surface even & Smooth without using extra cement complete all as specified and directed. |
| 34 | M&L for 10 mm thick plastering in Cement Mortar 1:3 finished even and smooth w/o using extra cement on ceilings complete all as specified and directed. |
| 35 | M&L for Preparation of new plastered or un-plastered surface of walls and applying two coats of oil bound distemper using roller brush on walls over a coat of primer and over incl one coat of 1.50mm thick Birla putty complete all as specified and directed. |
| 36 | M&L for Preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper using roller brush, over a coat of primer and over incl one coat of 1.00 mm thick Birla putty complete all as specified and directed. |
| 37 | M&L for preparing the newly plastered wall surface and applying primer with applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sq complete all as specified and directed.Note: Quoted rates shall deemed to be includs painting at any height including scaffolding work, as required |
| 38 | Dismantling of Stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar in floor, aprons etc complete all as specified and directed. |
| 39 | M&L for 22-25 mm thick Dholpur stone as in wall cladding, steps, footpath gang saw machine cut edges , polished, over 20mm thick cement screed in CM 1:4,set and jointed in cement mortar 1:3 and pointed in cement mixed with approved pigment to match the colour of the stone incl fasteners to support the stone complete all as specified and directed.Note:- Size and colour of stone to be matched with existing stone |
| 40 | M&L for 22-25 mm thick Red Agra sand stone as in wall cladding, steps, footpath gang saw machine cut edges , polished, over 20mm thick cement screed in CM 1:4,set and jointed in cement mortar 1:3 and pointed in cement mixed with approved pigment to match the colour of the stone complete all as specified and directed.Note:- Size and colour of stone to be matched with existing stone |
| 41 | M&L for Machine cut kota stone slab flooring 20-25 mm thick laid over 20 mm thick screed bed in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 42 | M&L for 100 mm thick PCC 1:4:8 type D-2 using (40mm graded aggregate) as in sub base of floor complete all as specified and directed. |
| 43 | M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed by Engineer in charge. |
| 44 | M&L for Providing and fixing at site factory made kerb stone of required shape and size of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required also incl dismantling of existing kerb stone complete all as specified and directed. |
| 45 | M&L for Providing edge moulding to 18 - 20 mm thick stone of any description of counters vanities etc incl machine polishing to edge to give high gloss finish etc complete all as specified and directed. |
| 46 | Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5m in depth etc not exceeding 10 Sqm on plan for shafts, cesspits, manholes pier holes, foundation etc and getting out in soft/loose soil complete all as specified and directed. |
| 47 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm on soft/loose soil complete all as specified and directed. |
| 48 | M&L for cement concrete 1:4:8 type D2 (using 40 mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed by Engr in charge. |
| 49 | M&L for reinforced cement concrete (Nominal Mix) type B-1 1:2:4 using 20 mm graded aggregates as in Foundations, including rafts, footings, foundation beams, Plinth beam, Bases for columns, etc basement slabs, under reamed piles and mass concrete complete all as specified and directed. |
| 50 | Form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work : vertical or to batter complete all as specified and directed by Engr in charge. |
| 51 | Form work for rough finished surfaces of concrete Square, Rectangular or polygonal to sides of pillar, struts, posts, piers, columns and stanchions etc complete all as specified and directed. |
| 52 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required,including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer in charge. |
| 53 | M&L for Mild Steel TMT bars 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 54 | Demolition cement concrete (reinforced) of any description and in any position complete all as specified and directed. |
| 55 | M&L for reinforced cement concrete (Nominal Mix) type B-1 1:2:4 using 20 mm graded aggregates as in slab supported on walls, beams and columns in floors, roofs,landings,balconies, canopies, deck slab and in shelves and the like complete all as specified and directed. |
| 56 | Form work to soffits of suspended slabs as roof slabs, floor slabs, landings and similar work n.exc 200mm thick Horizontal or sloping surface for rough finished surfaces of flat concrete complete all as specified and directed by Engr in charge. |
| 57 | Form work to edges of concrete flats, treads, breaks in floors, windows cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide ans sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide for rough finished surfaces of concrete complete all as specified and directed. |
| 58 | S&F in repairs Drappery curtain rods decorative type stainless steel 304 Grade, 25 mm nominal dia and having wall thickness 1.40 mm of approved quality/make including fixing of two number decorative brackets fixed in brick/concrete wall, Two number knob on both ends of curtain rods (The length of each curtain rod will be 1.00m to 2.50m long) complete all as directed and specified. |
| 59 | S&F in repair Vitreous China wash down water closet pan (S-Trap/ P-Trap) 1st quality Semi pedestal pattern (Anglo-Indian Type), white (excluding fixing bolts, flushing cistern and flush pipe) including sheet cover complete all as specified and directed.MAKE : Parryware / Hindware /Jaquar |
| 60 | S&F in repairs PVC valveless, syphonic action type, flushing cistern of 10 lit capacity low level, white, with inlet,ball valve, float and handle including brackets with 32 mm CP Flush pipe of Low level cistern complete all as specified and directed.MAKE : Parryware / Hindware / Jaquar |
| 61 | S&F in repairs 15 mm dia brass chromium plated long body Bib tap fancy type with capstan head screwed down for iron pipe complete all as specified and directed.MAKE : Kohler / Hindware / Jaquar |
| 62 | S&F in repair Hindware Amazon 15mm bore dia chromium plated Brass single lever basin Mixer, round spout with popup Waste assemly with 10mm dia , 450 mm long copper pipes complete all as specified and directed by Engr-in-Charge. Make:-Hindware CAT Part No:F-570012 or equivalent in Kohler / Jaquar |
| 63 | S&F in repairs chromium plated health faucet (Brass) with double Lock including wall Hooks & flexible pipe 15mm bore hose connecting pipe 1.2 m long with check nut and washers complete all as specified and directed by Engr in charge.Make:-Hindware CAT Part No : F-160122 or equivalent in Kohler / Jaquar |
| 64 | S&F in repairs chromium plated finish paper holder complete all as specified and directed by Engr-in-Charge. Make : Hindware cat. No. F840008 or equivalent in Kohler / Jaquar |
| 65 | S&F in repair PVC mirror cabinet of size 350 mm x 450 mm x150 mm with openable single looking mirror with PVC inner & outer shelves of any colour, complete all as specified and directed.MAKE : CERA / Hindware / PRAYAG |
| 66 | S&F in repair peg set of 6 fixed with rawal plug complete all as specified and directed.Make: Prayag Cat no BEA-30 or equivalent in Shakti / Hindware |
| 67 | S&F in repairs Soap Holder (Brass) with tumber holder complete all as specified and directed.MAKE : Hindware Cat No. F-840004 or equivalent in Kohler / Jaquar |
| 68 | S&F in repair One piece white Wash Basin with full Pedestal fo size 560 x 415 x 820 mm complete all as specified and directed. Make : Prayag Cat No : 4602 or equivalent in Jaguar/ Kohler |
| 69 | S&F in repair 32 mm bore PVC waste pipe for WHB complete all as specified and directed. |
| 70 | S&F in repair waste fittings brass chromium plated 32 mm dia for wash hand basin complete all as specified and directed. |
| 71 | S&F in repairs 600 mm long C P finish CP Towel Bar complete all as specified and directed by Engr-in-Charge. Make:- Hindware Cat. No. F840013 or equivalent in Kohler / Jaquar |
| 72 | S&F in repairs chromium plated cast copper alloy angle valve fancy type with capastan head screwed down ends for high pressure for 15 mm bore iron pipe complete all as specified and directed.Make: Hindware Cat No. F-320006 or equivalent in Kohler /Jaquar |
| 73 | S&F in repair 15mm bore dia Stainless Steel finish 2 way Bib Cock quarter turn including cover plate complete all as specified and directed by Engr-in-Charge. Make: Hindware Cat No. F-320005 or equivalent in Kohler /Jaquar |
| 74 | S&F in repair of Brass chromium plated towel ring, fixed with rawl plugs complete all as specified and directed. |
| 75 | S&F in repair 600mm Long PVC connection suitable for 15mm bore pipes complete all as specified and directed. |
| 76 | S&F in repair Full Glass Shelf 450 mm (with brass brackets) complete all as specified and directed.Make : Prayag Cat No : BEA-55 or equivalent in Jaguar/ Kohler |
| 77 | S&F in repair corner Glass Shelf 300mm (with brass brackets) complete all as specified and directed.Make : Prayag Cat No : BEA-44 or equivalent in Jaguar/ Kohler |
| 78 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness thickness (below or above ground level) and disposal of all bldg Materials to out side MOD land as per NGT guide line complete all as specified and directed. |
| 79 | M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded aggregates) as in plinth protection laid to slope 1 in 12 and finishing cement concrete surface even and smooth without using extra cement with and incl all necessary form work to divide the area in panels, finishing exposed edges rough or rounding or chemferring where directed and providing 6 mm thick joints through the thickness of plinth protection duly filled with mastic filling of one part of hot bitumen 85/25 grade and three parts of fine sand (all by wt.) complete all specified and directed. |
| 80 | M&L for two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces width or girth exc 10cm including preperation of surfaces complete all as specified and directed. |
| 81 | M&L for complete removal of existing treatment from old decorated wall surface by scrapping by electrically operated grinder machine/electric regmal machine and applying one coat of wall care putty with thickness 1mm, then scrubbing by sand paper to prepare a even surface and applying priming paint followed by applying two coats of Premium quality OBD of any colour complete all as specified and directed. |
| 82 | M&L for complete removal of existing treatment from old decorated wall surface by scrapping by electrically operated grinder machine/electric regmal machine and applying primer with applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sq complete all as specified and directed by Engineer in charge.Note: Quoted rates shall deemed to be includs painting at any height including scaffolding work, as required |
| 83 | M&L for complete removal of existing treatment from old surfaces of ceiling scrapping by machanical means and applying two coats of oil bound distemper using roller brush, over a coat of primer and over incl one coat of 1mm thick Birla putty complete all as specified and directed.Note: Make and Brand for Periodical Services and painting items are as under:-(i) Make for wall putty for first coat: Birla wall seal putty/ Asian smart care putty/ JK wall maxx putty(ii) Make for wall putty second coat: Asian paint trucare acrylic wall putty/ Berger happy wall acrylic putty/ Nerolac premium acrylic wall putty(iii) Make for Exterior acrylic emulsion: Asian apex ultima/ Berger weather coat long life/ Nerolac excel total/ Birla Opus Primer exterior E70(iv) Make for OBD: Asian tractor UNO/ Berger bison acrylic distemper/ Nerolac beauty acrylic distemper(v) Make for synthetic enamel paint: Asian paint apcolite premium gloss enamel/ Berger luxol high gloss enamel/ Nerolac synthetic hi gloss enamel |
| 84 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed. |
| 85 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed. |
| 86 | Supplying and laying of 20 mm dia CPVC pipes SDR 11 fittings on walls / ceiling or laying in floors including all brass and plain fitting with cement solvent complete all as specified and directed.Make :- Plasto / Prayag / Finolex |
| 87 | Supplying and laying of 25 mm dia CPVC pipes SDR 11 fittings on walls / ceiling or laying in floors including all brass and plain fitting with cement solvent complete all as specified and directed.Make :- Plasto / Prayag / Finolex |
| 88 | S&F CPVC Tank Adaptor of outer dia 20 mm complete all as specified and directed. |
| 89 | S&F in repair 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood plated brass screws and cup washers complete all as specified and directed by Engr in charge. |
| 90 | S&F in repair 110 mm dia PVC (SWR) pipes 5 mm thick (6 kg/ cm2) pressure pipe, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. Make:- Finolex / Supreme/ Vectus |
| 91 | S&F in repair 75 mm dia PVC (SWR) pipes 5 mm thick (6 kg/ cm2) pressure pipe, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. Make:- Finolex / Supreme / Vectus |
| 92 | S&F in repair 110 mm dia PVC (SWR) pipes 5 mm thick (6 kg/ cm2) pressure pipe, single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. Make:- Finolex / Supreme/ Vectus |
| 93 | S&F in repair 75 mm dia PVC (SWR) pipes 5 mm thick (6 kg/ cm2) pressure pipe, single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. Make:- Finolex / Supreme / Vectus |
| 94 | S&F MS Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to FE-290 Gde-E-165 complete all as specified and directed. |
| 95 | S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 96 | S&F in repair 75 mm dia PVC (SWR) floor trap, plain with CP grating 125 mm dia round including jointing with solvent cement fixed with cement mortar including necessary cutting etc complete all as specified and directed by Engr in charge. |
| 97 | S&F in repair 110 mm PVC (SWR) bends any radius complete all as specified and directed. |
| 98 | S&F in repair 110 mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 99 | S&F in repair 110 mm PVC (SWR) Cowl complete all as specified and directed. |
| 100 | S&F in repair 75 mm PVC (SWR) bends any radius complete all as specified and directed. |
| 101 | S&F in repair 75 mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 102 | S&F in repair 150mm PTMT Symet Bath assest Grating square hole/without hole fixed in position over Rain Water Pipe/nahani trap with cement slurry complete all as specified and directed. |
| 103 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 104 | M&L for Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar (1:6) complete all as specified and directed. |
| 105 | Demolition of existing treatment like PCC padding Cement Concrete (unreinforced) of any description incl. plastering and leeping complete all as specified and directed. |
| 106 | M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed. |
| 107 | M&L for brushing neat cement slurry with 3.0 kg of cement per sq. metre complete all as specified and directed. |
| 108 | M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregates) as in roof padding, roof kerb or mud stop, rounded or chamfered on edge complete all as specified and directed. |
| 109 | M&L for 10 mm thick rendering of CM 1:4 on cement concrete, mixed with integral water proofing compound as per manufacturere's instructions . (water proofing compound shall be measured and paid seperately) complete all as specified and directed. |
| 110 | Supply only water proofing compound liquid complete all as specified and directed. |
| 111 | M&L for heat reducing water proofing treatment of roof with reinforced elastomeric liquid waterproofing membrane of 400-micron thickness in four layer(100 micron each layer) having SRI of 130, tested as per ASTM E 1980 (with Solar Reflectance and Thermal emittance tested as per ASTM C 1549 and ASTM C 1371 , respectively). The coating should have water absorption less than 1% as per IS: 101 (P-7/Sec-1) 1989, with the ability to resist heat upto 120 degree celcius as per IS: 101 (P-7/Sec-3) 1990 having VOC less than 1.00 g/ltr as per ASTM D 3960 and should have excellent resistance to transmission of ponded water up to 2.5 bars of pressure for 7days. It should also be resistant to Ammonia solution, Sodium nitrate, Sodium hydroxide, along WIth water and soap solution as per IS: 101 (P-7/Sec-2)1990. The waterproofing heat reducing membrane will be laminated with 25 - 40-micron thick transparent Nano modified composite crosslinking polymeric coating with a minimum of 40% solid content as per IS: 101 (P -8/Sec6)1993 and also should pass Impact test as per IS: 101 (P-5/Sec-3) 1988 along with having dust and water repellent & anti-graffiti property passing Scratch hardness test of 500g as per IS: 101 (P-5/Sec-2) 1988. It should also pass Cross Cut Adhesion test as per IS: 101 (P-5/Sec-2) 1988. The Polymeric coating should have a self-cleaning and easy-to-clean property with excellent weather stability and DPR (Dirt pickup ratio). Surface preparation includes cleaning the surface with wire brush and washing cleaning to remove all dust, fungus, etc.The work will be done under the supervision of the Engineer-in-charge.The coating thickness and the methodology of application shall strictly be carried out by the authorised vender/ manufacturers with all specifications and as approved by the Engineer-incharge. Note: The manufacturer / authorised vender shall give a warranty for the peformance & durability for 10 years.Make : Starshield/ Ms Asian Paints Ltd/ Ms Pidilite/ Ms Birla Opus paints |
| 112 | Removing excavated soil of any description or any type etc on alternate day to a distance 5 km or beyond out side MOD land complete all as specified and directed. |
| 113 | M&L for uprooting of plants (girth n.exc 15 cm of trunk to any height of plants) grown along the pipes or walls, chajjas, parapets bldgs and making good the surfaces as per existing surfaces and pouring acid not less than 100 ml for each plant in the root to avoid further growth as directed. Any other grass plants etc below 45 cm height shall be deemed to be removed from the premises complete all as specified and directed. |
| 114 | Dismantling loose concrete cover of RCC columns, beams, slabs, chajjas, parapets, railing and the like as directed without disturbing the core of RCC member, roughening and cleaning concrete surfaces with steel wire brushes, washed with and allowed to dry, including application of rust removal cum passivator painted with brush to the rusted reinforcement (and removing rust with flex after 24hours of application of rust remover with the help of wire brush, sand paper) and also applying zinc anti-rust agent as per manufactures method of application to re bar corrosion protection system to reinforcement surface of steel reinforcement with existing reinforcement as directed wherever required binding RCC 100mmx100mm (10 gauge welded mesh) & tack welding after that applying polymer modified cementious bonding coat, prepared and applied on the concrete surface with 1 part of sika latex or equivalent in Forsoc/BASF/Dr Sunanda with 4 part of water and 6 part of cement by weight, coverage of sika latex shall not be more than 0.25 Kg/Sqm for one coat. Adhesive bond strength not less that 2.5 mpa, After this, providing 40mm (average thickness) guiniting mix @ pressure 2.2 to 2.5 kg per sqcm with anti corrosion admixture (using 1 part of ordinary potland cement 43 grade and 2 part of Ghagger sand mixed with adhesive /admixture at the rate as per manufacturer instruction and as directed) including stripping floting with wooden strippers for proper dimension control necessary, formwork and scaffolding, complete surface of guiniting to be finished fair with 10mm thick plaster in cement 1:4 with water proofing compound @ 3% by weight of cement cleaning and removing of waste material etc as directed at site complete all as specified and directed.Note: Welded mesh & addl reinforcement if required measured and paid separetly.Only steel scaffolding is allowed and rate included in above item. The work shall be carried out by enclosing affected area by green cloth up to G+3 storey building. |
| 115 | M&L for hard drawn steel wire fabric cut to length, bent to shape required of mild steel wire mesh / welded mesh and tying with and including annealed mild steel wire not less than 0.9mm dia binding wire S & F in reinforcement weight not exceeding 4.00 Kg/Sqm complete all as specified and directed by Engr in charge. |
| 116 | S&F in repair 15mm bore brass CP wall mixer (2 -in - 1 type) with L bend (provision for over head shower) fancy type for mixing hot and cold water screwed down for 15mm bore iron pipes complete all as specified and directed.Make : Prayag Cat No. 9375 or equivalent in Kohler/Jaguar/Hindware |
| 117 | S&F in repairs brass chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. Make : Hindware cat No. F160146 or equivalent in Kohler/ Jaquar |
| 118 | S&F in repair Ceramic Hindware Rhine - 96008 Italian collection urinals with fixing accessories set of size (69 x 34.5 x 28 Cm) Pedestal Basin (Star white) bowl type, of make complete including providing and fixing plugs, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; incl S&F of electric operated urinal sensor flushing part (Hindware Cat Part No 500963) and incl required accessories for making connection with urinal, brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed.MAKE : Hindware (Cat Part No. Hindware Rhine - 96008, part code 500963 ) or equivalent in Jaquar / Kohler |
| 119 | M&L for Granite (of any type) tiles 20mm thick (approved colour) machine cut Granite work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat-forms and like, bedded with 15 mm screed bed in cement mortar 1:4 and jointed with grey cement slurry including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite stone including grinding, and polishing complete all as specified and directed. |
| 120 | S&F in repair steel rolling shutters without ball bearing, as specified incl top cover anchoring rod hasp & staple and one shop coat of primer before erected in position as directed complete manual type thickness of lath 1.25mm complete all as specified and directed. |
| 121 | S&F in repairs roller ball bearing (ISI marked) for 32/40 mm dia pipe shaft complete all as specified and as directed by Engineer-in-charge. |
| 122 | M&L for repairing/welding of rolling shutter of any size by oiling & greasing and of whole rolling shutter incl all fittings and fixtures of shutter complete all as specified and directed. |
| 123 | M&L for Preparation of old painted surfaces of steel of any description over 10 Cm width or girth by applying sand paper etc.for proper preparation and applying one coat of synthetic enamel paint to give an even and smooth surface having no sign of brush marks all as specified and directed complete all as specified and directed. |
| 124 | Dismantling plain or corrugated steel sheeting, any guage, complete all as specified and directed. |
| 125 | S&F Pre-painted galvatume aluminium zince coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 126 | S&F PVC chhaja (Factory made) exc 0.2 sqm and not exc 0.6 sqm and fasterner 150mm long with complete set as per sample including demolition of old RCC chhaja complete all as specified and directed by Engr-in-charge and approval by GE |
| 127 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing completec on forming to Fe.290.Gde-E-165, complete all as specified and directed. |
| 128 | M&L for preparation of new or previously untreated surfaces, of steel and iron work of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of Red oxide complete all as specified and directed. |
| 129 | Dismantling fencing wire mesh, any type complete all as specified and directed. |
| 130 | M&L for mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 131 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire complete all as specifeid and directed. |
| 132 | Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed.Note :- Removing building materials /old waste unwanted existing material of any description or any type etc.on alternate day to a distance of 5km or beyond out side MOD Land and the cost for the same is deemed to be included in the quoted unit rates.Note: (a) Srl Item No 05.00 to 07.00, 12.00 to 15.00, 21.00 to 23.00, 29.00 to 32.00, 38.00 to 42.00, 107.00 to 110.00, 113.00, 117.00 to 119.00, 124.00, 126.00, 129.00 & 131.00 of BOQ and bathroom fittings & sanitary fittings are major items for the subject tender and material in respect of these items shall be procured within one month after placing of work order and produced before Engg in Charge alongwith original purchase vouchers as per direction of Garrison Engineer and shall obtain a certificate from Engg in charge that material in respect of above mentioned items have been submitted in the office of Engg in charge in their safe custody.(b) Materials in respect of Freakishly low declared items if any at the time of acceptance of contract shall be procured within one month after placing of work order and submit the same in the office of Engg in charge alongwith original purchase vouchers in their safe custody and shall obtain a certificate from Engg in charge. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
