|
| 1 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge. |
| 2 | Material and labour for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:3 with 3% of water profing compound as in sunken floor, complete all as specified and directed by Engineer-in-Charge. NOTE:- WPC will be paid for separately under respective item. |
| 3 | Supply only Integral waterproofing compound as in water proofing complete all as specified and directed by Engineer-in-Charge. |
| 4 | Material and labour for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surface, complete all as specified and directed by Engineer-in-Charge. |
| 5 | Material and labour for plain Cement concrete 1:5:10 type E2 (using 40 mm graded stone aggregate) as in foundations, filling under sunken floor and mass concrete, complete all as specified and directed by Engineer-in-Charge. |
| 6 | Material and labour for plain Cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in foundations, filling under sunken floor and mass concrete, complete all as specified and directed by Engineer-in-Charge. |
| 7 | Material and labour for premium quality, joint free, non skid coloured ceramic tiles, area of each tile exc 0.11 sqm but not exceeding 0.18 sqm, 7 to 8 mm thick as in floor, set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed or layer in cement mortar (1:4) including dismantling of existing tiles etc including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed by Engineer-in-Charge. |
| 8 | Material and labour for premium quality coloured glazed ceramic tiles (350 x 250 mm / 450 x 350 x 7 to 8mm thick) as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the shade of tiles over and including rendering 10mm thick in cement plaster 1:3 finished rough surface to receive tiles including dismantling of existing wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed by Engineer-in-Charge. |
| 9 | Material and labour for 18 to 20mm thick Granite stone of black shade work (table rubbed, polished and moulding), as in floors, cooking platforms and like bedded with and including 15 mm thick screed bed in CM (1:4) and jointed with grey cement slurry @ 3 Kg/Sqm, and pointed with white admixture of pigment to match with shade of granite stone including grinding, polishing, rounding and moulding of stone slabs on edges, including dismantling of existing stone slabs including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed by Engineer-in-Charge. |
| 10 | Material and labour for premium quality, light shade vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed as in neat, cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed or layer in cement mortar (1:4) including dismantling of existing tiles etc including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed by Engineer-in-Charge. |
| 11 | Material and labour for premium quality, light shade vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in vertical surfaces such as dado, skirting, set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including 10 mm thick rendering in cement mortar (1:3) including dismantling of existing tiles etc including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed by Engineer-in-Charge. |
| 12 | Supply and fixing of PVC (SWR) 110 mm pipe single socketed in any length with rubber ring joints fixed to wall or laid in floors including dismantling of pipes of any description, any length including bends etc complete all as specified and directed by Engineer-in-Charge. |
| 13 | Supply and fixing of PVC (SWR) 75 mm pipe single socketed in any length with rubber ring joints fixed to wall or in laid floors including dismantling of pipes of any description any length including bends etc complete all as specified and directed by Engineer-in-Charge. |
| 14 | Supply and fixing PVC (SWR) bends of 75mm radius complete all as specified and directed by Engineer-in-Charge. |
| 15 | Supply and fixing 75mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed by Engineer-in-Charge. |
| 16 | Supply and fixing PVC (SWR) bends of 110mm radius complete all as specified and directed by Engineer-in-Charge. |
| 17 | Supply and fixing in repair vitreous china wash hand basin, white, flat back of size 550x440mm including CI brackets , chromium plated waste coupling, waste pipe etc.,complete all as specified and directed by Engineer-in-Charge. |
| 18 | Supply and Fixing (in repair) for vitreous China squatting pan of Orrisa pattern size 580 mm x 440 mm white (Ist quality) with ‘P’ or ’S’ trap, front or back inlet and foot rests of any pattern complete including provision of lime concrete bed and connection to flush pipe excluding flushing cistern, flush pipe and bracket and making good the disturbed area complete all as specified and directed by Engineer-in-Charge. |
| 19 | Supply and fixing in repair of vitreous china wash down water closet pedestal pattern (EWC) , White including connection to trap and to flushing pipe with ‘P’ or ‘S’ trap, making good to floor, plastic water closet seat cover with mild steel chromium plated hinges and chromium plated jet spray with 1.5 meter flexible LDPE pipe jointed with pipe complete all as specified and directed by Engineer-in-Charge. |
| 20 | Supply and fixing in repair 10 ltr capacity PVC valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, 32 mm dia flush pipe complete all as specified and directed by Engineer-in-Charge. |
| 21 | Taking down wooden chowkats or frames with shutter (without taking off shutter from the frames), area exceeding 1.5 Sqm and not exceeding 4.00 Sqm each, complete all as specified and directed by Engineer-in-Charge. |
| 22 | Supply and fixing factory made PVC hollow door frame of size 50 mm x 47 mm with wall thickness of 5 mm made out of extended 5 mm rigid PVC foam sheet cut at corner and jointed with 02 Nos., 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided through out the frame and fixed to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos. of screws to be provided for each vertical number and minimum 02 Nos. for horizontal member), complete all as specified and directed by Engineer-in-Charge. |
| 23 | Supply and fixing factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 with particle board core raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification complete all as specified and directed by Engineer-in-Charge. |
| 24 | Supply and fixing in repair of PVC (SWR) floor trap 75mm dia plain with PVC grating including jointing with solvent cement complete all as specified and directed by Engineer-in-Charge. |
| 25 | Taking down Cement plaster on brick or stone walls including raking out joints hacking for key and scrubbing down with water etc complete and rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and fair (without using extra cement) on walls in cement mortar (1:6), complete all as specified and directed by Engineer-in-Charge. |
| 26 | Taking down Cement plaster from ceiling/ soffits of slabs/Chajja and rendering 5 mm thick in CM 1:3 as in soffits of slabs/Chajja/ceiling etc sunshade finishing the plastered surface even and smooth (without using extra cement etc) complete all as specified and directed by Engineer-in-Charge. |
| 27 | Material and labour for brick work with sub class ‘B’ bricks, straight or curved on plain exceeding 6 metre mean radius in cement mortar (1:6) including demolition of brick work built in cement mortar of any description including all quoins, archs, pillars etc complete all as specified and directed by Engineer-in-Charge. |
| 28 | Material and labour for 15mm thick rendering in cement mortar (1:6) on brick or concrete surface of any description, finished the surface even and smooth (without using extra cement) complete all as specified and directed by Engineer-in-Charge. |
| 29 | Material and labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper with hand roller, over a coat of alkaline resistant primer complete all as specified and directed by Engineer-in-Charge. |
| 30 | Material and labour for preparation of new surfaces (Plastered or un-plastered) of ceiling and applying two coats of white wash on ceiling, complete all as specified and directed by Engineer-in-Charge. |
| 31 | Supply and fixing in repair of 15mm bore, chromium plated, centre hole WHB mixer, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with long screwed shank and fly nuts, fancy type screwed for iron pipe and fixed bore of pipe 15 mm, complete all as specified and directed by Engineer-in-Charge. |
| 32 | Supply and fixing in repair of 15mm bore, fancy type, long neck, pillar tap (hot and cold), cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with long screwed shank and fly nuts, fancy type screwed for iron pipe and fixed bore of pipe 15 mm, complete all as specified and directed by Engineer-in-Charge. |
| 33 | Supply and fixeing in repair of CP bib tap screwed down high pressure, long body, cast copper alloy, chromium plated` with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union, complete all as specified and directed by Engineer-in-Charge. (Note : Weight of bib tap shall not be less than 0.575 Kg). |
| 34 | Supply and fixing in repair of 15 mm dia bib taps, cast copper alloy with flange, screwed down, screwed for iron pipe or for brass ferrule and fixed bore of pipe 15 mm complete all as specified and directed by Engineer-in-Charge. |
| 35 | Supply and fixing in repair of brass spindle suitable for 15mm dia CP tap/CP stop cock (short body/ long body)/CP pillar cock/Brass bib tap as per approved sample to match the existing fitting complete all as specified and directed by Engineer-in-Charge. |
| 36 | Supply and fixing in repairs Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed bore of pipe 15 mm. (Minimum weight 15mm-90gms/20mm-125gms) complete all as specified and directed by Engineer-in-Charge. |
| 37 | Supply and fixing in repair for 15 mm dia angular stop valves of chromium plated screwed down high pressure with crutch or butterfly handle complete all as specified and directed by Engineer-in-Charge. |
| 38 | Supply and fixing in repair of 100 mm dia CP grating any type fixed in floor and jointed in CM 1:3 complete all as specified and directed by Engineer-in-Charge. |
| 39 | Supply and fixing in repair of PVC internal fitting of low level flushing cistern with syphon, handle lever etc complete kit complete all as specified and directed by Engineer-in-Charge. |
| 40 | Supply and fixing in repair of tanks cover with locking arrangement as per sample for 500/1000 litres capacity PVC water storage tank complete all as specified and directed by Engineer-in-Charge. |
| 41 | Supply and fixing in repair of Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and directed by Engineer-in-Charge. |
| 42 | Supply and fixing in repair of sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12mm wide and chromium plated brakects guard and railing 60cm long etc complete all as specified and directed by Engineer-in-Charge. |
| 43 | Supply and fixing in repair of wall mixer (hot and cold), cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with long screwed shank and fly nuts, fancy type screwed for iron pipe and fixed bore of pipe 15 mm, complete all as specified and directed by Engineer-in-Charge. |
| 44 | Supply and fixing in repair of chromium plated wall mixer telephonic with crutch with provision of hand shower screwed for iron pipe and fixed bore of pipe 15 mm, complete all as specified and directed by Engineer-in-Charge. |
| 45 | Supply and fixing in repair of 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC bldg board or commercial plywood, fixed with aluminium angled frame and two CP MS hanging arrangements etc complete all as specified and directed by Engineer-in-Charge. |
| 46 | Supply and fixing in repair of PVC connections 600mm long and 15mm dia PTMT with PVC washers on both ends, complete all as specified and directed by Engineer-in-Charge. |
| 47 | Supply and fixing in repair of flush pipes to pedestal pan, including all joints complete all as specified and directed by Engineer-in-Charge. |
| 48 | Supply and fixing in repair of PVC seat cover (for EWC / Anglo Indian type WC complete all as specified and directed by Engineer-in-Charge. |
| 49 | Supply and fixing in repair of chromium plated (CP) waste coupling, 40mm dia bore suitable for steel sink. etc complete all as specified and directed by Engineer-in-Charge. |
| 50 | Supply and fixing in repair of chromium plated (CP) waste coupling, 32mm dia bore suitable for wash hand basin etc complete all as specified and directed by Engineer-in-Charge. |
| 51 | Supply and fixing in repair of PVC waste pipe 32mm dia flexible PVC hose pipe of standard length/size suitable for wash basin etc complete all as specified and directed by Engineer-in-Charge. |
| 52 | Supply and fixing in repair of CI brakets suitable for wash hand basin etc complete all as specified and directed by Engineer-in-Charge. |
| 53 | Supply and fixing in repair of PVC coloured bath cabinet overall size 400 x 500 mm decorative design with looking mirror, napkin rail complete all as specified and directed by Engineer-in-Charge. |
| 54 | Supply and fixing in repair of chromium plated brass towel rail 20 mm dia and 600 mm long including a pair of CP brackets fixed with plastic rawl plugs and CP screws complete all as specified and directed by Engineer-in-Charge. |
| 55 | Supply and fixing in repair of brass CP toilet paper holder, recessed type, fixed to wall with brass CP screws complete all as specified and directed by Engineer-in-Charge. |
| 56 | Supply and fixing in repair of soap dish brass CP superior quality, fancy type fixed with and including brass CP screws complete all as specified and directed by Engineer-in-Charge. |
| 57 | Supply and fixing in repair of Chromium plated shower rose with or without swivel joints, any size, including fixing to steel pipe or union with shower arm complete all as specified and directed by Engineer-in-Charge. |
| 58 | Supply and fixing in repair of pegs set of 6 Nos, power coated GI fixed with cadmium plated screws complete all as specified and directed by Engineer-in-Charge. |
| 59 | Supply and fixing in repair of stainless steel sink with drainage board 1.00 mm thick, for kitchen with plug, washers, including bedding in cement mortar on to dwarf wall or fixing cqntilever brackets of suitable angle iron, CP brass waste coupling, superior quality PVC waste pipe and connecting union to pipe, over all size 915mm x460mm, bowl size 410mm x 330mm x160mm complete all as specified and directed by Engineer-in-Charge. |
| 60 | Supply and fixing in repair of Kitchen sink made of stainless steel 1mm thick with plug, washers , including bedding in cement mortar on to dwarf wall or fixing contilever brackets of suitable angle iron, CP brass waste coupling, superior quality PVC waste pipe and connecting union to pipe, over all size 495mm x420mm, bowl size 410mm x 330mm x160mm complete all as specified and directed by Engineer-in-Charge. |
| 61 | Supply and fixing in repair of stainless steel plate rack 1mm thick of size 600 x 900 x 250 mm weighing not less than 5.0 Kg each fix with stainless steel screw to wall, complete all as specified and directed by Engineer-in-Charge. |
| 62 | Supply and fixing Steel water tubing of 15 mm bore, medium grade galvanized, with all fittings laid in floor with wall and on ceiling, as in repairs including taking down old tubing of any type, complete all as specified and directed by Engr-in-charge. |
| 63 | Supply and fixing Steel water tubing of 20 mm bore, medium grade galvanized, with all fittings laid in floor with wall and on ceiling, as in repairs including taking down old tubing of any type, complete all as specified and directed by Engr-in-charge. |
| 64 | Supply and fixing of water storage tank of 500 ltr capacity, HDPE triple layer, cylindrical, vertical with closed top and FDA approved, 100% UA stabilized, rust proof, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut, screwed and suitable for iron pipe 20 mm bore complete including dismantling/ taking out of old water tank and removing from site complete all as specified and directed by Engineer-in-Charge. Note:- Tank shall be white and make of tank shall be engraved on the tank. |
| 65 | Supply and fixing of water storage tank of 1000 ltr capacity, HDPE triple layer, cylindrical, vertical with closed top and FDA approved, 100% UA stabilized, rust proof, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut, screwed and suitable for iron pipe 20 mm bore complete including dismantling/ taking out of old water tank and removing from site complete all as specified and directed by Engineer-in-Charge. Note:- Tank shall be white and make of tank shall be engraved on the tank. |
| 66 | Supply and fixing in repair Ball brass valves,of 20mm bore high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge. |
| 67 | Supply and fixing METRENO door bottom sealing strip guard for home 2.5 cm door seals for bottom door stopper door gap filler rubber door insect sealer weather strip complete all as specified and directed by Engineer-in-Charge. |
| 68 | Material and labour for 5mm thick PVC hollow interlocking wall panelling of width 250mm for wall paneling for fixing on to wall with screws and solvent alongwith corner and u channel beading of colour choice including dismantling old boarding/panelling complete all as specified and directed by Engineer-in-Charge.Note : Rate will be inclusive any elctrical board, fitting etc effected for removing and refixing and making good to match with existing complete all as specified and as directed |
| 69 | Supply and fixing 300x300 mm and 10mm thick ultra paver parking tile in approved colour and shade and in anti skid finish set and jointed in neat cement slurry and pointed in white cement and pigment to match over and including 20 mm thick screed bed in cement mortar 1:4 including dismantlting old tiles complete all as specified and directed by Engineer- in - Charge . |
| 70 | NOTE:- Amount of credit of Rs. 72,765.00 for retrieved materials is mentioned in Schedule of Credit Page No 19 & 20 of tender documents in pdf form which will be deducted offline while acceptance of tender. Please Enable Macros to View BoQ information |
