|
| 1 | Demolition of cement concrete in ground floor and pavings n'exc 15cm thick below or above ground level complete all as specified and as directed. |
| 2 | Dismantling floor, hearth or wall tiling including wall cement mortar, bedding (But not backing ) and rubbish of premises complete all as directed. |
| 3 | Dismantling wall and ceiling boards (Fiber, pulp, insulation, blankets) any thickness including covered fillets and supporting members, complete all as specified and as directed. |
| 4 | Dismantlng framed wooden fillets, rails, posts, rafters, purlins, grids for ceiling & wall panelling etc under 40 Sq.cm in secton unframed work, complete all as specified and as directed. |
| 5 | Demolition of precast concrete block walling built in cement mortar including all quoins, arches , pillars etc all as specified and as directed. |
| 6 | Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and as directed. |
| 7 | Taking down chowkats / frames with shutters (without taking off shutters from the frames) area n'exc 1.5 Sqm each complete all as directed by Engr-in-charge. |
| 8 | Hacking out old broken glass (any thick ness, size, quality or description) from wooden panes or stone, concrete or brick surrounds, glazed with oil putty or fixed with beads complete all as specified and as directed . |
| 9 | Dismantling plain or corrugated steel /fibre sheeting any guage thickness including nanital or similar pattern complete all as specified and as directed |
| 10 | Dismantling wrought iron or mild steel work of any description not otherwise provided for angle iron or flat iron as in post and guard bars or grating, complete all as specified and as directed. |
| 11 | M&L for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with nails to timber frame work as in wall panelling, shelves/boarding complete all as specified and as directed. |
| 12 | M&L for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with nails to timber frame work as in ceiling panelling, shelves/boarding complete all as specified and as directed. |
| 13 | M&L for 2nd class soft wood clean sawn as in battens for grids of ceiling & lining fixed with nails exc 13 sqcm and n exc 25 sqcm in section.complete all as specified and as directed. |
| 14 | M&L for 2nd class soft wood clean sawn as in beeding for edges of Ceiling ,lining ,or wooden flooring work fixed with nails exc 6 sqcm and n exc 13 sqcm in section.complete all as specified and as directed. |
| 15 | M&L for covered fillets of standard hard board not less than 6mm thick and up to 40mm wide and fixing with screws complete all as specified and as directed. |
| 16 | M & L for 75 mm PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as plinth protection finished even and smooth with out using extra cement |
| 17 | M&L Forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound Grade 'A' in plinth protection |
| 18 | M&L for PCC type D2(1:4:8) using 40mm graded crushed aggregate as mass conc and filling of foundation. |
| 19 | M&L for pre cast solid block masonry set in CM 1:6 & casted in cement concrete type C-1 (1:3:6) using 20mm graded curshed stone aggregate complete all as specified and directed. |
| 20 | M&L for 15 mm thick rendering on other than fair faces of Stone wall works finished even and smooth without using extra cement in cement mortar 1:6 complete all as specified and as directed |
| 21 | M&L for 10 mm thick rendering on fair faces of brick works finished even and smooth without using extra cement in cement mortar 1: 4 complete all as specified and as directed |
| 22 | Supply only integral liquid water proofing compound complete all as specified and directed. |
| 23 | M & L for two coat of cement base paint on newly plastered surfaces including preparation of surfaces, complete all as specified and as directed. |
| 24 | M&L for preperation of new plastered wall surface of any description and applying three coat of white wash complete all as specified and as directed. |
| 25 | S&F anodised aluminium frames for door, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified. |
| 26 | S&F Anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws etc. complete all as specified |
| 27 | S&F Anodised aluminium window and ventilator shutters,including aluminium jali fixed in one side, side hung type without sash,aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150mm long (1 Nos) hinges type B-21 100mm long (2 Nos) suitable handle (1 Nos) etc. complete all as specified |
| 28 | S&F in repairs Galvanised mild steel wire cloth ,0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples. complete all as specified and as directed. |
| 29 | M&L sheet glass 5.5mm thick ordinalry quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane complete all as specified and as directed. |
| 30 | M&L sheet glass 3mm thick ordinalry quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane complete all as specified and as directed. |
| 31 | S&F 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed. |
| 32 | S&F 100mm long aluminium anodized, barrel tower bolt of extruded section complete. |
| 33 | S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed. |
| 34 | S&F 100 mm size extruded aluminium alloy handles, fabricated type, anodized complete. |
| 35 | S&F in repair aluminium (Die cast) body door closer hydraulically dessignation No 3 universal type suitable for door shutter of 851 to1000mm in width and weight 61 to 80 kg all as specified and directed |
| 36 | S&F in repair 1200mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with cromium plated brass screws and cup washers complete all as specified. |
| 37 | S&F floor door stopper (Length of cover plate ) 150mm long aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor complete all as specified and as directed. |
| 38 | S&F 75mm long aluminium anodized, butt hinges of extruded section complete all as specified and as directed. |
| 39 | S&F 100mm long aluminium anodized, butt hinges of extruded section complete all as specified and as directed. |
| 40 | S&F in repair 250mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and as directed |
| 41 | M&L for 25 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in sub base of floor complete all as directed by Engr-in-charge. |
| 42 | M&L Non-Skid ceramic Coloured Tiles 7 to 8mm thick(squre/rectanglar) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors over 15 mm screed bed or bedding layers in cement mortar 1:4 Set and Jointed in neat Cement Slurry and Pointed in Colour Cement to match, complete all as specified and as directed. |
| 43 | M&L for Glazed ceramic coloured tiles in vertical surfaces 350 x 250 x 7mm /450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match over 10mm thick CM (1:4) in dado/skirting tiles complete all as specified and directed. |
| 44 | S&F in repairs Towel Hanager with 6 Nos of pin and 600mm long Cromum plated etc complete fitted as per sepcified and directed by Engr-in-charge |
| 45 | M&L for hardcore of gauge nexc 63mm , deposited , spread and levelled in layers nex 15cm thick watered and rammed to a true surface |
| 46 | S&F MS Rolled sections in main and cross beams,hip and jack rafters ;purlins where connected to common rafters running rails and guids for sliding doors ;fixed with angle cleats or other connecting plates and similar work confirming to Fe-290, Gde-E-165 complete all as specified and as directed. |
| 47 | M&L preparation of new or previously untreated steel surfaces exc. 10 cm width/girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed. |
| 48 | S&F Pre painted galvalumealuminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mps as in roof covering /cladding to wall fixed with self tapping screws as specified |
| 49 | S&F Pre painted galvalumealuminium zinc coating GI based Plain steel sheet 0.50mm thick as in ridges , valley gutters drip etc of an colour having tensile strength of 550 Mps as in roof covering /cladding to wall fixed with self tapping screws as specified |
| 50 | S&F in repair 19mm dia mild steel, chromium plated curtain rods, with brackets, end bulbs all as specified and as directed by Engr-in-charge. |
| 51 | S&F in repair 110mm bore PVC (SWR) pipes single socketed, in any length with rubber joints fixed to walls complete all as specified and directed by Engr-in-charge. |
| 52 | S&F grating doom 75mm dia of PTMT (min weight 25gms) complete as specified and directed |
| 53 | S&F PVC (SWR) 'S or P', trap of 110 mm bore. |
| 54 | S & F in repair Vitreous china wash down water closet (Pedestal), white (EWC) including Plastic seat of same colour of WC, closed patttern with flat bottom, and cover and Mild steel chromium plated hinging device complete. |
| 55 | S & F in repair Vitreous China wash basin, white, flat back, size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe. |
| 56 | S & F 750 mm long, 32/ 40 mm dia., PVC flexible Waste pipe for sinks / wash hand basins. |
| 57 | S &F in repair Vitreous China urinals, Half stall type (back or corner wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) |
| 58 | S & F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 59 | S&F in repair 10 litres capacity PVC valveless syphonic action type, flushing cistern (ISI marked), low level ,white ,with inlet, ball valve, float and handle including bracket & flush pipe of polyethylene of low or high density or high density or PVC,32mm dia,for low level cistern complete all as specified & directed by Engr-in-charge. |
| 60 | S& F in repair CP tooilet jet sapray Abs with double lock 1.2 mtr CP tube stainless stelel flexibale hose all as specificed and as direced make cer/jaquar of equivalent. |
| 61 | S & F in repair toilet paper holder with flat ecessed type stainless stell fixed with screws complete all as specified and directed by Engrs -in -charge make Hindware & jaquar and equivalent |
| 62 | Taking down steel tubing 25 or 32 mm bore of pipe and connections in any position including cleaning for refixing or removal to store complete all as directed by Engr-in-charge. |
| 63 | S&F 3 layer PP-R Polypropylene random copolymer pipes 25mm dia SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot and cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to wall, ceiling or in floors etc. |
| 64 | S&F 3 layer PP-R Polypropylene random copolymer pipes 32mm dia SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot and cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to wall, ceiling or in floors etc. |
| 65 | Dismantling water tanks and removing to store Exc 250 and not Exc 500 . |
| 66 | S & F Water tanks, open or closed,hoisted and fixed in position Exc 250 and not Exc 500 . |
| 67 | S & F Ball brass valves,high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed |
| 68 | S&F 25mm bore stop cock chromium plated screw down under high pressure with crutch or butter fly handle screwed both ends for iron pipe or brass ferrule . |
| 69 | Taking down carefully copper/aluminium point wiring (light, fan, socket and power point) complete fittings such as switches, ceiling rose, regulators, socket etc and removing material from site and making good disturbed surfaces of walls, floors/ceiling to match the existing surface all as specified and directed. |
| 70 | Taking down of submain wiring surface of wall, floores / ceiling and match the existing complete all as specified and directed. |
| 71 | Point wiring complete with 1.5Sq.mm nominal area of copper conductor multi stranded PVC insulated and unsheathed 1100 volts cable drawn through & including PVC Casing & caping with standard accessories such as elbows, tees, junctions etc. and PVC moulded terminal box with top cover of including PVC insulated unsheathed solid 1.5Sqmm copper conductor cable as continuous earth lead all as specified and directed for the followings:- |
| 72 | One light/exhaust fan point controlled by one way switch complete all as specified and directed. |
| 73 | One switch socket outlet 6 Amps, 230 volts point on Same board complete all as specified and directed. |
| 74 | One switch socket outlet 6 Amps, 230 volts point on independent board complete all as specified and directed. |
| 75 | All as per item No 71 above, but using cables 4 Sq mm size complete all as specified and directed. |
| 76 | Supply and fix in replacement of lamp holder insulated body with back plate complete all as specified and directed. |
| 77 | Supply and fix Switch piano flush button single pole 6 Amps 230 volts one way complete all as specified and directed. |
| 78 | Supply and fix in replacement of switch Socket out let two in one 5 pin 6 Amps flush type.230 volts complete all as specified and directed. |
| 79 | Supply and fix switch Socket combination out let multi purpose 5 pin 6 Amps and 16Amps 230 volts complete all as specified and directed. |
| 80 | Supply and fix Ceiling rose, surface Bakelite three terminals complete all as specified and directed. |
| 81 | Supply and fix in replacement of 4 way double door TPN Vertical load line DB suitable for Flush/surface mounting with 160 Amp & 250 Amp copper bus bar with neutral & earth bars including MCCB 160 Amp TPN as incomer and fixing arrangements for SP MCBs including MCB SP 63 Amp 240 V,AC, ISI mark, 'C' curve as outgoing and making good disturbed surfaces of walls, floors, etc. complete all as specified. |
| 82 | Supply and fix in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volts 8 Ways complete all as specified and directed. |
| 83 | Supply and fix in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volts 4 Ways complete all as specified and directed. |
| 84 | Supply and fix in replacement of MCB SPN 63 Amp 240 Volts AC ISI marked complete all as specified and directed. |
| 85 | Supply and fix in replacement of MCB SP 6-32 Amps. 240 Volts 50 HZ complete all as specified and directed. |
| 86 | Supply and fix in replacement submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing Caping wire size 2x6.0 sq. mm + 1x6.0 sq. mm earth wire complete all as specified and directed. |
| 87 | Supply and fix in replacement LED light fitting 1 x 20 W, 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 88 | Supply and fix in replacement LED luminaire 600mm x 600 mm, 35/36 watt,220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and directed |
| 89 | Supply and fix in replacement connecting and testing LED security light fitting 35 watt, 230 volt, AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp and bracket with impact and corrossion resistant incl thermal management in multiple optics complete all as specified and directed. Please Enable Macros to View BoQ information |
| 90 | Supply and fix in replacement connecting and testing LED security light fitting 35 watt, 230 volt, AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp and bracket with impact and corrossion resistant incl thermal management in multiple optics complete all as specified and directed. Please Enable Macros to View BoQ information |
