|
| 1 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed by the Engineer-in-Charge. |
| 2 | Dismantling wrought iron or mild steel work of any description not otherwise provided. |
| 3 | S & F Rolled mild steel (Fe-410 W(Gde E-250) quality B) in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and as directed |
| 4 | S & F Rolled mild steel (Fe-410 W(Gde E-250) quality B) Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and as directed |
| 5 | S & F Mild steel section in door/window chajja, wind ties etc for roof covering including screwing bolts etc complete all as specified and as directed. |
| 6 | S & F Pre- painted coloured galvalume GI based profiled steel sheet 0.50mm thick having 0.45mm thick base metal thickness and zincalume (Aluminium,Zinc & Silicon coating) AZ 150,min150 gm/Sqm,having tensile strength of 550 Mpa & Profiled with pitch distance 195-200 mm c/c and rib depth 28 to 32 mm fixed as in roof covering/cladding to wall,by using self tapping screws/J hooks as directed by Engr-in-Charge. |
| 7 | S & F 2 mm thick Fibre glass reinforced translucent corrugated/plain sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed. |
| 8 | S & F pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having 0.45mm thick base metal thickness and zincalume (Aluminium,Zinc & Silicon coating) AZ 150,min150 gm/Sqm,having tensile strength of 550 Mpa as in ridge, velly gutter, window shed, cladding to wall, fixed with self tapping screws as specified |
| 9 | Material and Labour for preparing new previously treated or untreated steel surface of any description, over 10cm in width or girth,not otherwise described & applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified. |
| 10 | Dismantling Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/ slabs/blankets, any thickness, including cover fillets complete all as specified and directed. |
| 11 | M&L for 09 mm thick prelaminated particle board interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to frame work as in ceiling complete all as specified and directed. |
| 12 | M&L for 12 mm thick prelaminated particle board interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to frame work as in Walls panelling/partition complete all as specified and directed. |
| 13 | S&F, Aluminium anodised sections powder coated frame and shutters for doors/windows /ventilators /partitions/ceiling frame of any thickness with one or more rebates including joining cleat for fixing etc complete, frames, directed by Engineer-in-charge, powder coating shall not be less than 50 micron. |
| 14 | M&L for 2nd class hard wood fillet square or rectangular in section clean sawn screwed with nails or beads of sectional area exc 13 Sqcm but not exc. 25 sqcm including taking out the existing complete all as specified and directed |
| 15 | Taking down chowkhat with shutter (without taking off shutter) and removing from site, n exc 1.50 Sqm each complete all as specifed |
| 16 | Taking down Chowkhats or frames exc 1.5 sq. M but n exc 4 sq. M each (Without taking off shutter from the frame) |
| 17 | S&F 125mmx60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. including filling of cement concrete 1:3:6 type C1 in frame complete all as specified and as directed. |
| 18 | S & F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 19 | Supply and fixing in repair factory made steel windows (Box type) with glazing bars, dovetailed or welded including hinges, steel handles, tower bolt, steel peg stays etc including one shop coat of red oxide zinc chrome primer complete all as specified and directed. |
| 20 | Supply and fixing in repair factory made steel windows (Box type) w/o glazing bars, dovetailed or welded including hinges, steel handles, tower bolt, steel peg stays etc including one shop coat of red oxide zinc chrome primer complete all as specified & directed. |
| 21 | S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified. |
| 22 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specifed and as directed |
| 23 | S&F 3 mm Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specifed and as directed |
| 24 | S&F 150mm Mild steel pressed handles, oval type, stove enamelled black complete all as specifed and as directed |
| 25 | S&F 300 mm long mild steel sliding door bolts plate type stove enammelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and tow on staple plate and fixed complete all as specifed and as directed |
| 26 | S&F 200mm Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specifed and as directed |
| 27 | M & L for painting of new wood based surfaces two coat of synthetic enamel paint on wooden surface of any description over 10 cm in width or girth over a coat of pink primer including preparation of new surfaces complete all as specifed |
| 28 | M&L for Mild steel curtain rod, powder coated, ornamental type of dia 25 mm including matching side & wall to wall brackets and funnels including taking out the existing complete all as specified and directed. |
| 29 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified. . |
| 30 | M&L Joint free coloured Glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade over and incl 10 mm rendering in CM 1:4 complete all as specifed and as dircted. |
| 31 | M&L Non skid ceramic coloured tiles 7 to 8 mm thick (Square/ractangular ) joint free tiles, area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement.over 15mm thick screed bed or bedding in CM 1:6 complete all as specified and as directed cement to match complete all as specifed and as directed |
| 32 | M&L Non skid ceramic coloured tiles 7 to 8 mm thick (Square/ractangular ) joint free tiles, area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement.over 15mm thick screed bed or bedding in CM 1:6 complete all as specified and as directed cement to match complete all as specifed and as directed |
| 33 | M&L machine cut kota stone slab flooring 20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and incl 20mm thick screed bed or bedding layer of cement mortar 1:6, all as specified and directed by Engr -in- Charge. |
| 34 | Demolition of brick/stone/boulder/block masonry, built in cement mortar complete all as specified and directed. |
| 35 | Material and labour for Pre-cast cement concrete block 1:3:6 type C1 (using 20 mm graded aggregete) masonarywith solid blocks, exc 10 cm in width and setting in cement mortar 1:6 complete all as specified & directed. |
| 36 | M&L Rendering 15 mm thick cement plaster in CM 1:4 on brick or concrete surface on wall finished even and fair without using extra cement complete all as specifed and as directed |
| 37 | M&L Rendering 10 mm thick cement plaster in CM 1:4 on brick or concrete surface on wall finished even and fair without using extra cement incl taking down existing plaster complete all as specifed and as directed |
| 38 | Demolition of cement concrete of any description & in any position not otherwise specifically provided for (unreinforced), complete all as specified and directed. |
| 39 | M&L PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base complete all as specified. |
| 40 | M&L 50mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate as in plinth protection , all as specified and directed by Engr -in-Charge. |
| 41 | M&L for two coats of cement base paint on New / old plastered surfaces of walls including preparation of surfaces by brooming or by steel wire brushing, complete all as specified and directed. |
| 42 | S&F in repairs for vitreous china wash basin white flat back size 550 x 400mm including bracket 32 mm waste coupling CP and 32 mm pvc waste pipe complete all as specified and as directed. |
| 43 | S & F in repairs Wash down water closet (Pedestal pattern), complete including PVC seat cover and CP jet as directed complete all as specified and as directed. |
| 44 | S&F in repairs for Bib taps cast copper alloy with capstan handle of bore 15mm, chromium plated complete all as specified and as directed. |
| 45 | S&F in repairs of 15mm Angular Stop valves, cast copper alloy, screwed down, high pressure, screwed both ends for iron pipe or for unions fancy type chromium plated, complete all as specified and as directed. |
| 46 | S & F bevelled edge mirror of 600x450mm selected quality glass mounted over 6mm thick AC bldg board or comercial plywood fixed to wooden plug with CP brass screw and cup washer fixed in repair complete all as specified and as directed. |
| 47 | Supply and fixing central hole Basin Mixer, without popup waste system with 450mm long copper pipes and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and as directed. |
| 48 | Supply and fixing wall Mixer, mixer for mixing hot & cold water screwed down for iron pipe and fixed, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and as directed. |
| 49 | Supply and fixing Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified fixed as in repairs complete all as specified and directed. |
| 50 | Supply and fixing PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC bend for squat/pedastal pattern etc , fixed as in repair complete all as specified and as directed. Please Enable Macros to View BoQ information |
