|
| 1 | Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area etc. complete as per the direction of the Engineer-in-charge. |
| 2 | Removing old lime or cement plaster from walls including raking out joints 12 mm deep and removing the debris within 50m lead etc. complete as per direction of the Engineer-In-charge |
| 3 | Dismantling brick or stone masonry in lime or cement mortar under 3m. height including stacking the useful materials for reuse and removing the debris within 50m. Lead etc. complete as per direction of the Engineer-In-charge. |
| 4 | Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking the same for reuse and removing the debris within 50m lead |
| 5 | Brick work with Fly. bricks 23cm x 11cm x 8cm size having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) in foundation and plinth including cost, conveyance, royality, T&P etc complete as per direction of the Engineer in charge. |
| 6 | 12mm. thick cement plaster in cement mortar (1:6) in out side face for brick walls after racking out joints including watering, curing with cost, conveyance, royality and taxes of all materials and cost of all labour T&P required for the work including 1 % cess etc. complete as per direction of the Engineer in charge. |
| 7 | 6 mm thick cement plaster (1:4) to R CC surfaces finished smooth including closed deep chiping and slury treatment. Per 1 Sqm |
| 8 | Cement concrete (1:3:6)with 4cm size hard granite metal including cost of all materials, labour T&P etc. required for the work etc. complete as per direction of the Engineer-in-charge. |
| 9 | Fixing tiles in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of precast tiles ( VETRIFIED TILES ) |
| 10 | Finishing wall surface with Acrylic wall putty(water based)of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all material, taxes, cess, labour ,T&P etc. complete. |
| 11 | Wall painting 2 coats with plastic emulsion paint of approved shade on new work to give an even shade inculding cost of paint, labour, T&P etc complete as per direction of the Engineer-In-Charge. |
| 12 | Wall painting two coats with any approved quality of Weather seal coat over a coat of priming on new work to give an even shade including cost of all materials, labour, T&p required for the work complete. |
| 13 | Painting two coats with approved paint on old iron work including cost of all materials, labour T&P etc. required for the work etc. complete as per direction of the Engineer-in-charge. |
| 14 | Supplying fitting fixing sita board door shutter with all fitting etc complete |
| 15 | Providing, fixing and fitting of M.S. doors shutter frame, windows frame, shutter with grill gate etc. complete including cost, conveyance, T&P and all taxes of all materials etc. complete as per the direction of the Engineer-in-charge. |
| 16 | Supplying and Labour for fixing big six or trafford A.C. Sheet in roof including fixing of ridges wind ties etc complete drilling hole in wind ties etc complete. |
| 17 | Providing & laying 80mm thick factory made cement concrete interlocking paver block of M-40 grade made by block makine machine with strong vibratory compaction of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. |
| 18 | C.C. (1:2:4) with 12mm and down grade C.B. chips approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and including cost, carriage, royalty, cost of all labour T.&P. etc complete and as directed by E.I.C. |
| 19 | Supplying, fitting and fixing Dura sine colour coated 0.45mm Tata Brand in roof. Drilling holes in windties including fixing of Ridges, Valleys and windties including cost of sheets, labour etc. complete. |
| 20 | Supplying, fitting and fixing PVC rain gutter including all cost, labour etc. complete per 1 RM . |
| 21 | Removing of derbis from work side up to 5km lead ect all complete Please Enable Macros to View BoQ information |
