|
| 1 | Earth work excavation by manual means in hard soil or gravelly soil in foundation trenches or drains with in 50m. initial lead and 1.5m. initial lift including dressing of sides and breaking clods maximun 5cm to 7cm and laying in layers not exceeding 0.3m. in depth and as per direction of the Engineer-in-charge. |
| 2 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge (a) Hard Soil |
| 3 | Filling in foundation trenches and plinth with river sand, well watered and compacted in layers with top surface dressed and leveled to proper gradient including cost of all labours, materials, conveyance, loading and unloading, all taxes and royalties, sundries and T&P etc all complete as per direction of the Engineer -in-charge |
| 4 | Providing and laying of Cement Concrete of grade 1: 4 :8 with 40 mm hard granite crusher broken metal , mixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period including cost of all labours, materials, conveyance, loading and unloading, all taxes and royalties, sundries and T&P etc all complete as per direction of the Engineer -in-charge. |
| 5 | Construction of granular sub-base by providing close graded Granular sub-base Grading III material as per table 400-I, spreading in uniform layers with mortor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory rollar to achive the desired density complete as per Clause 401 of MoSRTH specification for Road & Bridge works ( 4th Revision) |
| 6 | R.C.C. work of M-20 grade with 20mm and down grade black hard granite (crusher broken) stone chips of approved quality from approved quarry including hoisting , laying, hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, T&P, etc. complete. |
| 7 | Supplying uncoated HYSD bar reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete |
| 8 | Rigid & smooth centering & shuttering for RCC works including false works and dismentling after casting including cost of materials complete. |
| 9 | R.C.C. foundation , plinth band and footings bases of columns, mass concrete, precast slabs etc |
| 10 | R.C.C. beams, column, grider and bressmer, etc. |
| 11 | R.C.C. floor and roof slabs, landings, balconies, projecting sun shades and chajjas |
| 12 | Taking out existing C.C. interlocking Paver blocks from foot path/Central verge including removal of rubbish etc., disposal of unservicible material to the dumping ground and stacking of serviceable material within 50mtr lead as per direction of E-I-C. |
| 13 | Laying old cement concrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc all complete as per direction of E-I-C. |
| 14 | Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by block macking machine with proper compaction laid in required pattern etc. complete in all respect confirming to IRC SP-63-2018 |
| 15 | Painting runway/ taxi track/ apron marking with adequate nos. of coats to give uniform finish with road marking paint of superior make as approved by the Engineer in charge including cleaning the surface of all dirt, scales, oil, grease and other foreign materials etc. and lining out complete (a) New work( Two or more coats) |
| 16 | Painting two coats with any approved synthetic enamel paint including a coat of Red oxide primer to give an even shade. |
| 17 | Supplying of M.S.door, window with grill, grills, M.S.Gates, collapsible gates made out of M.S.Angle frame, M.S.flat, sheet etc of approved section and design, electrically welded properly with all necessary locking arrangement including cost of all materials, labour, T&P, carriage of materials to site etc. complete. |
| 18 | Labour charges for fitting M.S.door, window with drills, grills, M.S.Gates, collapsible gates as per approved design including cost of all labour, T&P etc. complete. |
| 19 | 6mm thick cement plaster (1:4) to R.C.C. surfaces finished smooth including closed deep chiping and slurry treatment including watering, curing, cost, carriage, royalty and taxes of all materials, cost of all labour, T&P etc. complete |
| 20 | 16mm thick C.P. in c.m. (1:6) over brick masonery to the rough surface including watering, curing, cost, carriage, royalty and taxes of all materials, cost of all labour, T&P etc. complete |
| 21 | Brick work with Fly Ash bricks 23 cmx11 cmx8 cm size having crushing strength not less than 75 kg./cm² with dimensional tolerance ± 2 percent in cement mortar (1:6) in F&P including watering, curing, cost, carriage, royalty and taxes of all materials, cost of all labour, T&P etc. complete as per the direction of Engineer-in-charge. |
| 22 | 1200 mm high boundary wall 40mm thickness consists of RCC precast concrete post of size 150mmx150mmx3000mm height, having two grooves of size 45x28mm so as to receive 8nos. Precast concrete panels of size 1500mmx300mmx40mm thickness. The post shall be reinforced with 4 nos 8mm dia bars with 4mm diastirrups @150mm c/c; panels shall be reinforced with 4 nos longitudinal bars of 6mm dia plain steel & 6mm plain M.S. stirrups @ 150mm C/C all welded, manufactured by using M-30 grade of concrete. The post shall be fixed to the ground by digging a hole of 500mmx450mmx600mm and filled with 1:3:6 concrete after the post should be aligned in these holes. The post will be errected @ 1.615m c/c height of the pillar shall be 3000mm (600 mm below ground and 2400 above GL) |
| 23 | Supplying, fitting & fixing PPGL (Pre-painted Galvanised) sheet of 0.5mm thick in roof including cost, carriage and taxes of all materials including self drilling/ self tapping screws of size( 5.5x55mm ) with EPDM seal etc. complete at site. |
| 24 | Providing and fixing 20 mm thick Granite stone mirror polished premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size of approved shade, colour and texture laid over 25 mm thick base cement mortar 1:1 with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding & polishing to edges to give high gloss finish etc. complete to all levels. (a) Polished granite stone slab of Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 25 | Providing & Fixing in position 3 seaters Cement concrete bench with handle in both side of approved Design |
| 26 | Resto Reflective Board including Stand |
| 27 | Cleaning & lifting and transporting the excavated earth from the work site by mechanical means up to 5 km. lead |
| 28 | Supplying all materials, labour , T&P and fitting & fixing UPVC SWR pipes( Type- B of the following outside diameter confirming to IS: 13592/1992 including jointing with rubber lubricant by non heat application method including testing etc, all complete |
| 29 | Display board Please Enable Macros to View BoQ information |
