|
| 1 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead : |
| 2 | With cement mortar 1:4 (1 cement: 4 coarse sand) |
| 3 | Providing and applying white cement based putty of average thickness 1mm,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 4 | Finishing walls with textured exterior paint of required shade : |
| 5 | New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqm. |
| 6 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade |
| 7 | New work (two or more coats) over and including priming coat with cement primer:- |
| 8 | Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS : 8183 density 24kg/m3, 50mm thick,wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5mm x 24g wire and mesh, for top most ceiling of building. |
| 9 | Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 10 | 0.63 mm thick with zinc coating not less than 275gm/sqm |
| 11 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : |
| 12 | Local best quality Tolhao wood |
| 13 | Float glass panes |
| 14 | 4 mm thick glass panes |
| 15 | Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. |
| 16 | 40mm thick with 20mm nominal size stone aggregate. |
| 17 | Half brick masonry with Ist class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in |
| 18 | Cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 19 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. |
| 20 | Double charge vitrified tile polished finish of size |
| 21 | Size of Tile 600 x 600 mm |
| 22 | Wiring Item |
| 23 | Wiring for light point / Fan point/ Exhaust Fan ponit / Call bell point with 1.5mm2 PVC insulated copper conductor single core cable in pvc casing and capping with piano type switch, phenolic laminated sheet suitable size M.S. Box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc. as reqd. |
| 24 | 3. Group C |
| 25 | Wiring for circuit / sub- main wiring along with earth wire with ( the following sizes of ) PVC insulated copper conductor single core cable in PVC casing and capping etc as reqd. |
| 26 | 2. 2x2.5mm2 + 1x2.5mm2 earth wire |
| 27 | 3. 2x4mm2 + 1x4mm2 earth wire |
| 28 | 4. 2x6mm2 + 1x6mm2 earth wire |
| 29 | Wiring for circuit / sub- main wiring along with earth wire with the following sizes of PVC insulated Al. conductor single core cable in PVC conduit on surface/in recess etc as reqd. |
| 30 | (3x35 mm² +1x25mm²)+2x25mm² as earth wire |
| 31 | Fixing Items |
| 32 | S/F PVC box of size 101mmx178mm (Nominal size)/(4''x7'')PVC board on surface including P/F 3 pin 5/6 amp socket outlet and 5/6 amp piano type switch connection etc as reqd. |
| 33 | S/F PVC box of size 152mmx203mm (Nominal or size)/(6''x8'')PVC board on surface including P/F 6 pin 15/16 amp socket outlet and 15/16 amp piano type switch connection etc as reqd. |
| 34 | 76.2mmX76.2mm conical round plate |
| 35 | S/Fbrass batten /angle holder i/c conection etc as reqd. |
| 36 | S/F 3 pin 5 amp ceiling rose on the existing junction box /wooden block i/c connection etc as reqd |
| 37 | S/F 20W CFL lamp. |
| 38 | Supplying & fixing stepped type electronic fan regulator on the existing modular plate switch box i/c connection but excluding modular plate etc as reqd. |
| 39 | S/F 450mm sweep exhaust fan complete with all accessories i/c connection etc as reqd. |
| 40 | Single piece cast Al.with full glass cover integral lumineries (IP66) HPSV-70w grey powder coated dia -cast Al. housing complete with all acceries (BGEST-150 SV SHN WOB/BJOS 250 SV/MH) (188507/168797) |
| 41 | S/F 48'' Sweep (1200mm) A.C ceilling fan complete with down rod canopy, 3 (three) blades but without regulator etc as reqd.( Make Bajaj/Usha or simillar) |
| 42 | S/F ( following way) single/ double pole and neutral , sheet steel MCB distribution board, 240 V on surface/ recessed complete with tinned copper bus bar neutral bus bar , earth bar , din bar, detachable gland plate , interconnection ,phosphatized and powder painted including earthing etc. as reqd. ( but without MCB/RCCB/Isolator). |
| 43 | 3. 8 way single door |
| 44 | Supplying and fixing 5 amp to 32amp rating 230 V 'B' series MCB for lighting and other load of ( following poles ) in the existing MCB DB complete with connection testing and commissioning etc as reqd. |
| 45 | 1. Single pole |
| 46 | S/F( following rating) double pole 240v isolator in the existing MCB DB complete with connection ,testing and commissioning as reqd. |
| 47 | 1. 40 amp |
| 48 | Supplying and fixing wall mounted metal board of welded construction with minimum 35mmx35mmx6mm angle iron frame work with 25mmx6mm flat iron as intermediate membersi/c painting etc as reqd. |
| 49 | Providing and fixings (following capacity TP & N) disconnector fuse switch unit inside the existing cubicle panel board with ISI marks HRC fuses including drilling holes in the cubicle panel board, making connection as reqd. |
| 50 | 3. 32 amp TP&N |
| 51 | 3. 100 amp TP&N |
| 52 | 5. 320 amp TP&N |
| 53 | S/F Bus Bar chamber with 4 strips copper bus bar of length 300 mm suitable for 200 amp capacities complete with all accessories i/c connection earthing the body etc as reqd. |
| 54 | S/F Bus Bar chamber with 4 strips copper bus bar of length 300 mm suitable for 100 amp capacities complete with all accessories i/c connection earthing the body etc as reqd. |
| 55 | Earthing with copper earth plate 600mmx600mmx6mm thick i/c i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.( but without charcoal or coke and salt ) as reqd. |
| 56 | P/F 25mmx25mm copper strip in 40mm dia G.I pipe from earth electrode as reqd. |
| 57 | Extra for using salt and charcoal for G.I or copper palte earth electrode as reqd. |
| 58 | P/F earth bus of 25mmx25mm copper strip in 40mm dia G.I pipe from earth electrode as reqd. Please Enable Macros to View BoQ information |
