|
| 1 | Dismantlimg & removing of the following old damaged items as per the reqiurment at site at any height upto any floors including scaffolding, disposing the same at specified place including supplying of all labours, materials, T&P etc all complete as per the direction of Engineer-in-charge.(Excluding GST). |
| 2 | Plastering |
| 3 | A.S. flooring |
| 4 | Brick work. |
| 5 | Old damaged grading from roof surface. |
| 6 | R.C.C. member. |
| 7 | Brick work in Fly Ash Bricks of size 25Cm X 12Cm X 8Cm and having crushing strength not less than 75 Kg/Cm² to 99Kg/Cm with C.M (1:6) including splay / cutting, racking out the joints curing, hoisting, staging at any height with cost and supply of all materials, labour, T&P, tollage, royalties, taxes, staging, scaffolding, curing, water charges all transportation charges etc. all complete & as per direction of Engineer-in-charge. (Excludicng cost of GST). |
| 8 | In foundation & plinth For man hole / Inspection chamber /drains |
| 9 | In super structure for damage RCC balcony ,parapet , kitchen pedestal |
| 10 | 12mm thick Cement Plastering with CM(1:6) proportion, over brick work including racking out the joints, finished smooth to the exposed surface, rounding thecorners wherever found necesary including cost & supply of all materials, labour, T&P, staging scaffolding, watering, curing, taxes, tollage, royalties, etc. complete as directed by Engineer-in-charge.(Excluding GST). |
| 11 | 25mm. thick A.S. flooring in cement concrete (1:2:4) at all floors & levels using 12mm. and down grade hard granite chips of approved quality including mixing, hoisting, laying, consolidating, curing, by water tanker, finished smooth to the exposed surface with a floating coat of cement punning, rounding the corners where found necessary including cost of supply of all materials, labour, T&P, taxes, tollage, royalties, transportation charges, etc. complete & as per direction of Engineer-in-charge.(Excluding GST) |
| 12 | R.C.C(1:1.5:3) for R.C.C. works using 12mm to 20mm size H.B.G. chips for all floors, foundation & plinth etc. of approved quality, mixing as per approved design mix, hoisting, laying, compacting, curing including centring & shuttering with cost and supply of all materials, labour, T&P, taxes, tollage, royalties, laboratory charges for performing design mix & testing as per relevant IS code etc. all complete as directed by Engineer-in-charge..(Excluding GST). for cover slab like kichen slab, water tank slab, sewage chambers |
| 13 | Rigid smooth leak proof centring & shuttering for RCC work with Ply/Steel plank & bullah of approved quality in all areas as per requirment of site at any height & de-shuttering the same after prior period of concrete setting including supplying of labours, materials, scaffolding, T&P all complete as per the direction of Engineer-in-charge..(Excluding GST).( Roof slab, chajja,landing) |
| 14 | Reinforcement to R.C.C. works with TMT steel of minimum Fe-500 grade as per ISI 1786 including cutting bending, binding straightening of M.S. Tor Steel/Coil tying the grills and placing the grills in position including supply of 18 gauge binding wire with supply of all materials, labour, T&P, all taxes, etc. complete as directed including cost of steel.(No wastage shall be paid. Steel coefficient should be as per IS 1786).(Excluding GST). |
| 15 | Dismantling and removing the old damaged shutters, chaukaths, ventilators, shutters with frames including removing the fastenings, depositing the dismantled unusable materials at departmental store with cost supply of all labour, T&P, staging, scaffolding, all transportations etc. Complete & as directed by Engineer In-Charge..(Excluding GST). |
| 16 | Repairing of old damaged door/window Supply of 32mm thick seasoned Non-Sal/Hard wood paneled Door/window shutters as is where required having both side styled moulded having bottom rail of 200 mm thick,top rail 100mm thick , middle lock rail 200 mm thick alongwith straight vertical moulded style of 125mm width (total 2 panels) and panel should be 20 mm thick piasal plank embedded 16mm to styles & rails with one no of aluminum aldrop of size 300mm x 16mm x 40mm, two nos of 150 mm with 175mm x 40mm flat aluminum handles, 2 nos. of 200 mm x 10mm aluminum tower bolts and required numbers of wooden hinged cleats, fixing at position etc all complete . including cost of all materials, labour, loading & unloading Charges, all taxes, transportation charges, stacking at site store etc. all complete as directed by Engineer In-Charge.(Excluding GST) |
| 17 | Supplying R.C.C. door /window frames of cross section 100mm X60mm of M-25 concrete using OPC-43 Grade cement and steel reinforcement of 5.5mm to 6mm dia M.S Rod with provision of hinges,locks,W.I.Clamps.etc all complete as directed by E.I.C,Excluding GST. |
| 18 | Labour charges for fitting & fixing of DOOR frame clamps with supply of all labour, T&P, taxes etc. all complete as per direction of Engineer-in-charge.(Excluding GST) |
| 19 | Supplying fitting & fixing of salwood choukath with cost of loading & un-loading stacking at departmental stores all complete including cost and supply of all materials, T&P, all taxes, transportation, etc. complete as per direction of Engineer-in-charge..(Excluding GST).NB: Without painting. |
| 20 | Supplying fitting and fixing of 25mm thick WPC door shutter of 0.55 density with all fittings and fixtures with stainless steel including cost of loading & un-loading charges, with supply of all labour, materials like hinges, tower bolt, handle, aldrop etc. T&P, all taxes, transportation, all lead and lift etc. complete as per direction of Engineer-in-charge (Excludicng cost of GST) |
| 21 | Supplying, fitting & fixing of WPC door and window frames of size( 50x70mm) of 0.75 density with all fittings and fixtures with stainless steel including cost of loading & un-loading charges, with supply of all labour, materials like hinges, T&P, all taxes, transportation, etc. all lead and lift complete as per direction of Engineer-in-charge (Excludicng cost of GST) . |
| 22 | For toilet /bath ( Size -50x70mm) |
| 23 | For room inside door ( Size -125mmx65mm) |
| 24 | Supplying, fitting, fixing of MS welded grills, fabricated with suitable M.S angle and flat, welded to proper shape , size & design fixed to position with screws, nails and grouting to walls in C.C (1:2:4) including cutting grooves in walls and making good the damages with cost and supply of all materials, labour, T&P, taxes, transportation, welding charges , grinding, staging, scaffolding, curing etc. all complete as per the direction of Engineer in charge.(Excluding GST). |
| 25 | Painting to interior wall surface with oil bound distemper paint of approved quality shade preparing the surface sand papering, applying paint uniformly including cost and supply of all materials, labour, T&P, all taxes, transportation charges, staging, scaffolding, etc. complete and as per direction of Engineer-in-charge. .(Excluding GST). |
| 26 | One coat |
| 27 | two coats |
| 28 | Enamel painting one coat to wood/iron work of approved quality & shedover a coat of primer after scrapping, sand prepering & cleaning the surface & filling the joints & holes with putty(bolied or raw) where found necessary before paint including all cost, supplying of all labour, materilas, T&P, scaffolding at any hight all complete as per the direction of Engineer-in-charge..(Excluding GST). |
| 29 | Removal & uprooting of wild vegetation , unwanted plants from residential/non-residential buildings ( From roof cornice, parapet,chajja, Head room , top of roof slab, wall ,junctions of water supply & sanitary pipes etc.) with supply of all labour ,T&P,staging,scaffolding removal of debrises from site & disposing same with intial lead & lift.all complete as directed by Engineer In-Charge.(Excluding GST) ..Payment will be made considering 12units as a block. |
| 30 | Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymer having sun reflective index (SRI) of 105 on top of concrete roof in 03 coats @10.76 ltr/10sqm ,one coat of self priming of elastomeric water proofing liquid ( dilution with water) in the ratio of 3:1 and 02 coats of undiluted elastomeric water proofing liquid ( dry film thicknesss of complete application / system not less than 500 micron .The operation shall be carried out after scraping and properly cleaning the surface to remove particles with wire brushes complete in all respect as per the direction of engineer-in-charge ( The said item or the equivalent water proofing coating may be adopted) |
| 31 | Providing & fixing of 32mm thick factory made paneled hard wood door,windows, made out of duly seasoned & treated hard woods. The Styles, Rails & Intermediate rails are kiln seasoned as per IS-1141, ASCU Chemically pressure treated as per IS-401, Panels are also seasoned and chemically pressure treated made out of hard wod as per IS-1003/Part-I & II . Necessary fitting & Fixtures to fix the shutters inposition with Screws of stainless steel et. with cost of loading & un-loading stacking at departmental stores including dismantalling the damaged shutters and depositing the old/damaged/dismantted shutter at section office with supply of all labour, materilas ,T &P, all taxes, transportation, etc. complete as per direction of Engineer-in-charge.(Excluding GST) |
| 32 | Making lead caulked joints to C.I. Pipe and special as per specification including making lead jointing caulking, gasketing and testing the joints and supply of lead, Gasket, fire wood, cost and conveyance of all materials required for the work and all labour, T&P, taxes, etc. all complete and testing the pipe as per direction of Engineer-in-charge (Excluding GST). |
| 33 | 100mm dia. Lead joint |
| 34 | 150mm dia. Lead joint |
| 35 | 200mm dia. Lead joint |
| 36 | 250mm dia. Lead joint |
| 37 | 300mm dia. Lead joint |
| 38 | 450mm dia. Lead joint |
| 39 | Cleaning of chocked ferrule points ( excluding fittings )& replacing of G.I fittings if necessary as per site condition including earth work excavation and refilling with labour, T&P checking the pipe line to ensure no leakage on resuming to required pressure with mending good to damages etc. all complete as per direction of Engineer-in-charge.(Excluding GST) |
| 40 | Cleaning of O.H. tank of multistoried building, cleaning the deposited silt inside the tanks by aid of pans & vessels & brushing the interior surface by soft brushes using bleaching / surf wash for germ free as per direction with supply of all labour & pumping out water by diesel pump with hire & running charges of pump including cost of fuel & operator scaffolding upto any height if required etc complete as per direction of Engineer-in-charge.(Excluding GST) |
| 41 | Supplying of following PH materials of good quality with ISI mark with all transportation loading & unloading at both ends with all taxes, tollage, royalty etc. Complete & deposited in the section store as per direction Engineer-in-charge.(Excluding GST) |
| 42 | Porcelain hand wash basin (parryware/Hindware/Hindustan)(16\\" x 22\\") |
| 43 | 15mm dia C.P Pillarcock (Plaza/Amber) |
| 44 | 32 mm CP waste |
| 45 | 32mm PVC Waste pipe |
| 46 | 15mm Connection pipe (PVC/CP) |
| 47 | Porcelain kitchen sink (24' x 18\\" X10\\" )(Hindware/Parryware/Johnson) |
| 48 | Steel Kitchen Sink (24x18x10)cm (Hindware/Parryware/Johnson) |
| 49 | 5mm thick bevelleged plate glass mirror 24\\" x 18\\" size with masonite board and mirror screw. |
| 50 | 50mm G.M.F.W.V |
| 51 | 25MM G.M.F.W.V |
| 52 | 10 ltr capacity PVC low level cistern (Slimline) |
| 53 | CP Soap Holder |
| 54 | 100mm dia shower |
| 55 | 20mm dia 60cm long towel rail |
| 56 | C.P Glass self (600x125) with glass |
| 57 | CP self |
| 58 | 150mm/100 mm dia C.I/CP. Grattings |
| 59 | 15mm dia C.P angle stopcock(Amber/Plaza) |
| 60 | 15mm CP Bibcock (Plaza / Amber). |
| 61 | 15 mm dia Symet bibcock (Prayag)) |
| 62 | 15mm dia PVC pillar cock (Prayag) |
| 63 | Cistern washer |
| 64 | PVC washer |
| 65 | Long Flush bend for Cistern |
| 66 | C.P Towel ring |
| 67 | White cement |
| 68 | M-seal |
| 69 | Hacksaw blade |
| 70 | Porcelain 23\\" IWC ( Orissa Pan) |
| 71 | Commode (s-trap) EWC/AWC with cover |
| 72 | commode sheet cover and clamp (Parryware) |
| 73 | 2000 ltrs capacity (PVC-3 core white colour Sintex Make) |
| 74 | 1000 ltrs Capacity (PVC-3 core white colour Sintex Make) |
| 75 | Supply of G.I Pipes (Medium Quality)/PVC pipes (Sch-80) of different dia. with ISI mark & specification including transportation, all taxes, tollage, & disposing the materials in site office store with stacking including supplying of all labour, T&P etc complete as per direction of Engineer-in-charge(Excluding GST). |
| 76 | 15mm Dia. G.I pipe (TATA/JINDAL) |
| 77 | 20mm Dia. G.I pipe (TATA/JINDAL) |
| 78 | 25mm Dia. G.I pipe (TATA/JINDAL) |
| 79 | 40mm Dia. G.I pipe (TATA/JINDAL) |
| 80 | 50mm Dia. G.I pipe (TATA/JINDAL) |
| 81 | 15mm UPVC Pipe (Supreme/Oriplast) |
| 82 | 20mm UPVC Pipe(Supreme/Oriplast) |
| 83 | 25mm UPVC Pipe(Supreme/Oriplast) |
| 84 | 40mm UPVC Pipe(Supreme/Oriplast) |
| 85 | 50mm UPVC Pipe(Supreme/Oriplast) |
| 86 | Supply of U-PVC fittings of different dia. of medium quality as per ISI mark & specification including transportation, all taxes, tollage, & disposing the materials in site office store with stacking including supplying of all labour, T&P etc complete as per direction of Engineer-in-charge(Excluding GST) |
| 87 | 15mm Dia. U-PVC union |
| 88 | 50mm Dia. U-PVC union |
| 89 | 15mm Dia. U-PVC elbow |
| 90 | 50mm Dia. U-PVC elbow |
| 91 | 15mm Dia. U-PVC tee |
| 92 | 50mm Dia. U-PVC tee |
| 93 | 15mm Dia. U-PVCsocket |
| 94 | 50mm Dia. U-PVC socket |
| 95 | 15mm Dia. U-PVC MTA ( Brass Threaded) |
| 96 | 50mm Dia. U-PVC MTA( Brass Threaded) |
| 97 | 15mm Dia. U-PVC FTA( Brass Threaded) |
| 98 | 50mm Dia. U-PVC FTA( Brass Threaded) |
| 99 | 15mm PVC Ball Valve |
| 100 | 50mm PVC Ball Valve |
| 101 | U-PVC Paste |
| 102 | Thread tape |
| 103 | Supply of G.I fittings of different dia. of medium quality as per ISI mark & specification including transportation, all taxes, tollage, & disposing the materials in site office store with stacking including supplying of all labour, T&P etc complete as per direction of Engineer-in-charge(Excluding GST). |
| 104 | 15mm Dia. G.I socket |
| 105 | 50mm Dia. G.I socket |
| 106 | 20mm G.I. RS. |
| 107 | 15mm Dia. G.I union |
| 108 | 15mm Dia. G.I elbow |
| 109 | 15mm Dia. G.I tee |
| 110 | 50mm Dia. G.I tee |
| 111 | 15mm Dia. G.I S.P. |
| 112 | 50mm Dia. G.I S.P. |
| 113 | 15mm Dia. G.I Plug |
| 114 | 20mm Dia. G.I Plug |
| 115 | Cleaning of sewerage line, septic tanks (Big & small) man hole, I.C., soak-way pit & disposing sewerage sludge & burring in a pre-digged pit near by & closing with local earth with supply of all labour, T&P, pump including hire & running charges of pumps all taxes etc. all complete as per direction of Engineer-in-charge.(Excluding GST) |
| 116 | Man holes |
| 117 | Inspection Chamber |
| 118 | Gresase Chamber. |
| 119 | Small size Septic tank. |
| 120 | Big size Septic Tank. |
| 121 | Labour charges for dismantalling of IWC/ EWC/AWC/OWC holes in brick/ conc. work supply of fitting & materials with socket & screw joints including cutting threads to pipe, pipes to length including earth work excavation of all types of soil, required scaffolding & refilling the trench after the work & fixing of pipe line in wall with clamps of providing light barriers with supply of all labour, T&P, taxes etc. all complete as per direction of Engineer-in-charge.(Excluding GST) |
| 122 | Labour charges for fitting & fixing of IWC/ EWC/AWC/OWC holes in brick/ conc. work,making flooringwith CC(1:2:4) and neat cement finish with supply of fitting & materials with socket & screw joints including cutting threads to pipe, pipes to length including earth work excavation of all types of soil, required scaffolding & refilling the trench after the work & fixing of pipe line in wall with clamps of providing light barriers with supply of all labour, T&P, taxes etc. all complete as per direction of Engineer-in-charge.(Excluding GST) |
| 123 | Labour charges for laying of PVC pipes and other PH materials laid on wall or under graund including dismantling , cutting holes in brick/ conc. Work supply of fitting & materials with socketand screw joints including cuttingthreads to pipe, pipes to length including eachworkexcavation of all types of soil,required scaffolding & refilling the trench afterthework andfixing of pipeline in wall with clamps of providing light barriers withsupply ofall labour ,T&P taxes etcall complete as per direction of Engineer in charge(Excluding GST) |
| 124 | Laying of 15mm to 25mm. Dia pipe. |
| 125 | Laying of 40mm to 50mm. Dia pipe. |
| 126 | Supplying the following HCI/PVC pipes and fittings of different dia with ISI mark (Supreme) including loading and unloading at both ends with all cost of materials,labours,T&P,,taxes,royalties etc.Allcomplete as per direction of engineering in charge. (Excluding GST) |
| 127 | 110mm PVC Pipe |
| 128 | 110mm PVC door bend |
| 129 | 110mm PVC P trap |
| 130 | 110mm PVC S/J with door |
| 131 | 110mm PVC Clamp |
| 132 | Bamboo |
| 133 | cement |
| 134 | Engagement ofHydraulic Excavator of 1cum bucket for each work excavation during execution of work including supply of operator,fuel tools and plants etc all completeas directed by engineering in charge.(Excluding GST) |
| 135 | Supplying fitting fixing of 8mm thick ceramic floor tiles ( premimum Quality 300 x300 mm or 400 x 400 mm size)in 1st floor, treads or steps and landing on 20 mm thick bed of cement mortar 1:4(1cement: 4 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and cleaning complete including supply of all labour material taxes tollage etc all complete but excluding GST as per direction of Engineer in charge. |
| 136 | Engagement of Tractor for shifting of sludge, debris from one place to other etc. with fuel, engagement hire & running charges, cost of operator, etc. all complete as per direction of Engineer-in-charge only engagement perod will consided, no idle charge will be considered (Excluding GST). |
| 137 | P.C.C(1:4:8) of using 40mm. & down H.B.G chips of approved quality in foundation & plinth including mixing hosting, laying to proper level & slope compacting, curing, watering charges etc. complete including cost & supply of all materials, labour, T&P, taxes, but excluding GST etc. complete as directed by Engineer-in-charge for plinth protection , sewage chambers , flooring |
| 138 | Supplying, fitting, fixing of mosquito proof net door shutter made out of seasoned piasal wood (75mm x 32mm) size batten for style, top rail, bottom rail and lock rail by using mosquito proof net Netlon screen (20X20 square mesh) of approved quality with wooden beading, nail, inlcuding dismantling the damaged frames from its position, fixing the new frames will all aluminium fittings etc. complete including cost & supply of all materials, labour, T&P, taxes, transportation etc. as per direction of Engineer-in-charge (Excluding cost of GST) |
| 139 | Providing fitting & fixing of Mosquito net with supply of Velcro for Windows including cost of all materials, labour etc. all complete as per direction of Engineer- in charge. (Excluding cost of GST) (for Windows) with male & female rates for fixing. Please Enable Macros to View BoQ information |
