Name of Work:- Schedule for repair & renovation works of the Cycle Shed at Raman Abas under BCKV, Mohanpur, Nadia
Sl. No.
Item Description
1
Taking out carefully G.C.I. or C.I. or asbestos sheets (incl. ridges etc.) from roof or wall after unscrewing bolts, nuts, screws etc.& stacking the material at site as directed
2
Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed
3
White washing including cleaning and smoothening surface thoroughly.All floors : Two coats (to be done on specific instruction).
4
Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.In Ground Floor - One Coat
5
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.In Ground floor (Two Coat) - Premium 100% Acrylic Emulsion
6
Painting with ready mixed red lead paint of approved make and brand :One coat
7
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :With super gloss (hi-gloss) - Two coats (with any shade except white)On steel or other metal surface
8
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]With 1:6 cement mortar - 15 mm thick plaster
9
Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work).In Roof:- With 0.5 mm thick sheet
10
Miscellaneous items for the unforeseen works which may arise during actual execution of work to be done as per direction of EIC. (Payment will be made as per PWD schedule of rates of analysis rate based of or market rate incase of non-schedule item)
11
Add G.S.T. @ 18%
12
Add Labour cess @ 1% Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
