|
| 1 | EARTH WORK EXCAVATION IN ALL SOILS AND SUB SOILS EXCLUDING ROCK INCLUDING BACKFILLING IN SIDES OF FOUNDATIONS AND BASEMENT, WATERING, CONSOLIDATION, INCLUDING DEWATERING WHEREVER NECESSARY, ETC., AND DISPOSING OFF THE SURPLUS EARTH WITHIN A LEAD OF 40 MTRS AS DIRECTED IN DEPTH FROM GROUND LEVEL TO -2 MTR. |
| 2 | PROVIDING COURSED RUBBLE STONE MASONRY WITH POINTING WORKS, SECOND SORT IN CEMENT MORTAR 1:7 WITH THROUGH BOND STONES 2 MTRS APART IN EACH COURSE, PLACED IN A STAGGERED PATTERN AND COURSE NOT LESS THAN 150MM HIGH WITH FACE STONES PLACED HEADERS AND STRETCHERS ALTERNATIVELY TO BREAK JOINTS BY ATLEAST 75MM INCLUDING CURING ETC., COMPLETE FOR FOUNDATION BASEMENT UPTO +1.00 MTR LEVEL. |
| 3 | CEMENT CONCRETE 1:4:8 USING 25MM DOWN GAUGE BLUE GRANITE AGGREGATE IN FOUNDATIONS, MUD MAT, FLOORING EXCLUDING SHUTTERING BUT INCLUDING RAMMING, LEVELLING, CURING ETC., COMPLETE. |
| 4 | PREPARE SURFACES OF BASE COURSE BY REMOVING ALL LOOSE MORTAR BY HACKING AND LAY TO REQUIRED SLOPE 50MM THICK GRANO FLOOR OF MIX 1:1.5:3 USING 10 TO 12MM GRANITE CHIPS INCLUDING FINISHING AT ALL LEVELS. |
| 5 | CEMENT CONCRETE M25 USING 20MM SIZE BLUE GRANITE AGGREGATE FOR ALL CEMENT CONCRETE ITEMS SUCH AS FOOTING, RAFT, PLINTH BEAM, ETC., EXCLUDING SHUTTERING BUT INCLUDING LEVELLING, CURING, ETC., COMPLETE BELOW GROUND LEVEL AND UPTO FFL. |
| 6 | FORM WORK - WROUGHT AND PUT UP WITH GOOD QUALITY MARINE GRADE PLYWOOD / STEEL SHUTTERING FOR ALL TYPES OF SHUTTERING WORKS LIKE FOOTING, RAFT, PLINTH BEAM, ETC., AS \\"PLASTER FREE FINISH\\" BELOW GROUND LEVEL AND UPTO FFL. |
| 7 | TAKE DELIVERY OF HIGH STRENGTH RIBBED DEFORMED BARS/ MS BARS ISSUED BY TNPL FREE OF COST, CUT, BEND AND TIE UP IN POSITION INCLUDING COST OF SUPPLYING NECESSARY 18 GAUGE BINDING WIRE FOR ALL TYPES OF RCC WORKS AT ALL LEVELS. |
| 8 | SUPPLY AND LAYING OF FLY ASH BRICKS IN SUPER STRUCTURE IN CM 1:6 INCLUDING SCAFFOLDING, CURING ETC., COMPLETE ABOVE +0.00 MTR TO +7.00 MTR |
| 9 | SUPPLY AND LAYING OF FLY ASH BRICKS IN HALF BRICK THICK WALL IN CM 1:4, EXCLUDING PLASTERING, INCLUDING SCAFFOLDING, CURING ETC., COMPLETE AT ALL LEVELS. |
| 10 | PREPARE SURFACES OF WALLS AND PLASTER INTERIOR, EXTERIOR AND TOP FACES WITH CEMENT MORTAR, 12MM THICK IN CM 1:4 INCLUDING NECESSARY SCAFFOLDING AND CURING ETC., COMPLETE FROM FFL TO +7.00 MTR LEVEL. |
| 11 | PROVIDING AND FIXING OF 50MM THICK PUFF PANEL AT TERRACE LEVEL IN POSITION AS PER SPECIFICATION, DRAWING AND DIRECTION. |
| 12 | SUPPLYING OF M.S HOLLOW SECTION OF SUITABLE SIZE AND THICKNESS WITH FABRICATION AND ERECTION AS PER REQUIREMENTS LIKE RAFTER, PURLIN, CLEAT ETC., AND NECESSARY WELDING, BOLT JOINTS, LABOUR CHARGES AND COST OF ALL CONSUMABLES WITH ONE COAT OF RED OXIDE PRIMER ETC.,COMPLETE AT ALL LEVELS. |
| 13 | SUPPLYING AND FIXING OF GRANITE SLAB 20MM THICK OF APPROVED COLOUR AND FIX IN POSITION OVER FLOORING,WINDOW OR DOOR JAMBS,STEPS,COUNTER TOP ETC., ONLY WITH TILE ADHESIVE OF APPROVED MAKE (MYK LATICRETE, KERAKOLL, OR ANY OTHER APPROVED MAKE AND COLOUR. RATE INCLUDES SHIFTING THE MATERIALS, CURING ETC., COMPLETE AT ALL LEVELS AS DIRECTED BY ENGINEER IN CHARGE. |
| 14 | SUPPLY AND FIXING OF GLASS PARTITION USING 12MM THICK TOUGHEND GLASS (MAKE : SAINT GOBAIN) WITH 3 MM THICK COLOUR COATED ALUMINIUM HORIZANTAL FRAME OF SIZE 100 X 45MM AND OTHER CONSUMABLES LIKE GLASS EDGE NOSING, RUBBER BEADINGS, CLIP, SCREWS, 15” DOOR HANDLE (2 NOS), SEALENT PACKING ETC., COMPLETE AT ALL LEVELS AS DIRECTED BY ENGINEER INCHARGE. |
| 15 | \\"SUPPLYING AND FIXING OF GLASS DOOR (DOUBLE LEAF) OF SIZE 2.10 X 2.44 MTR USING 12 MM THICK TOUGHEND GLASS WITH NECESSARY FLOOR SPRINGS, PIVOT, HANDLES LOCKING ARRANGEMENTS,, BEADING ETC., AS DIRECTED BY ENGINEER INCHARGE AT ALL LEVELS\\". |
| 16 | SUPPLY & FIXING OF 12MM THICK TOUGHENED SINGLE LEAF GLASS DOOR OF REQUIRED SIZE WITH DORMA FITTINGS. DORMA FITTING CONSISTS OF FLOOR SPRING (DOOR SHALL CLOSE AUTOMATICALLY) , PIVOT AND CLIP ARRANGEMENT, HANDLE, LOCK ARRANGEMENTS, ETC . COST INCLUDES LABOUR CHARGES, TRANSPORT, HANDILING, LOADING, UNLOADING ETC., COMPLETE |
| 17 | SUPPLY AND INSTALLATION OF THE TERRACOTTA JAALI WALL OF REQUIRED SIZE AND THICKNESS WITH CAMP GALLEY TO THE WINDOW OPENING INCLUDING PAINTING, COST OF ALL CONSUMABLES, LABOUR CHARGES ETC., COMPLETE AT ALL LEVELS AS DIRECTED BY THE ENGINEER IN CHARGE |
| 18 | FOR SMALL WORKS WHICH IS UNQUANTIFIED EXACTLY, SUPPLY OF ELECTRICAL CONCRETE BREAKER (BOUSH MAKE -MODEL NO.11E) WITH LABOUR FOR DISMANTLING OF COCNRETE, BRICK WORK, CR MASONRY, ETC., THE WORK INCLUDES DISPOSAL OF DISMANTLED DEBRIS WITHIN THE LEAD OF 2KM APART AS DIRECTED. |
| 19 | PROVIDING MANPOWER ASSISTANCE FOR ATTENDING MISCELLANEOUS CIVIL WORKS - MASON. |
| 20 | PROVIDING MANPOWER ASSISTANCE FOR ATTENDING MISCELLANEOUS CIVIL AND STRUCTURAL WORKS – HELPER FOR MASON / PLUMBER / CARPENTER / FITTER / WELDER, ETC., |
| 21 | \\"MAKING EDGE POLISHING / FULL NOSING / HALF NOSING / CHAMBERING / V GROOVE / 45 DEGREE GROOVE / HALF CUTTING WITH POLISH OF MARBLE / GRANITE / SAND STONE SLABS / VITRIFIED TILES ETC., AT ALL LEVELS. THE RATE INCLUDES CUTTING CHARGES, TRANSPORTATION, POLISHING MATERIALS AND LABOUR ETC,COMPLETE\\" |
| 22 | SUPPLY AND APPLICATION OF ONE COAT OF WEATHER PROOF EXTERIOR PRIMER AND TWO COATS OF EXTERIOR EMULSION OF APPROVED COLOUR SHADE INCLUDING SCAFFOLDING, LABOUR ETC., COMPLETE AT ALL LEVELS. (ASIAN OR BERGER). |
| 23 | ERECTION OF SCAFFOLDING AND CLEANING THE SURFACES OF WOODEN DOORS/WINDOWS/GRILLS USING WIRE BRUSH, EMERY SHEETS AND APPLY TWO COATS OF SYNTHETIC ENAMEL PAINT OF EITHER BERGER,ASIAN, SHALIMAR, ICI DULUX OR EQUIVALENT (INDUSTRIAL QUALITY) OF APPROVED COLOUR INCLUDING COST OF ALL MATERIALS,PAINT AND ALL OTHER INCIDENTAL CHARGES ETC.,COMPLETE AT ALL LEVELS. |
| 24 | PREPARE SURFACES AND APPLY TWO COATS OF WHITE WASH USING APPROVED MAKE INCLUDING MIXING WITH SUFFICIENT QUALITY OF GUM LIKE FEVICOL ETC., COMPLETE AT ALL LEVELS. |
| 25 | \\"ERECTION OF SCAFFOLDING AND CLEANING THE SURFACES OF EXISTING CEMENT SURFACE USING WIRE BRUSH, EMERY SHEETS AND APPLY ONE COAT OF RUSTICK TEXTURE WALL PUTTY OF ALTECH ( NCL) OR ANY OTHER APPROVED MAKE AND DESIGN, RATE INCLUDING COST OF ALL MATERIALS, PAINT AND ALL OTHER INCIDENTAL CHARGES ETC.,COMPLETE AT ALL LEVELS ,AS DIRECTED BY ENGINEER INCHARGE.\\" |
| 26 | CEMENT CONCRETE M25 USING 20MM SIZE BLUE GRANITE AGGREGATE FOR ALL CEMENT CONCRETE ITEMS SUCH AS COLUMN, BEAM, SUNSHADE, SHELL WALL, ROOF SLAB, STAIRCASE, ETC., EXCLUDING SHUTTERING BUT INCLUDING LEVELLING, CURING, ETC., COMPLETE ABOVE FFL TO +7 MTR LEVEL. |
| 27 | FORM WORK - WROUGHT AND PUT UP WITH GOOD QUALITY MARINE GRADE PLYWOOD / STEEL SHUTTERING FOR ALL TYPES OF SHUTTERING WORKS LIKE COLUMN, BEAM, SUNSHADE, SHELL WALL, ROOF SLAB, STAIRCASE, ETC., AS \\"PLASTER FREE FINISH\\" ABOVE FFL TO +7 MTR LEVEL. |
| 28 | THOROUGHLY PREPARE THE SURFACES OF WALLS AND APPLY TWO COATS OF FIRST QUALITY WALL PUTTY INCLUDING FINISHING SMOOTHLY WITHOUT ANY WAVINESS, ETC., AT ALL LEVELS. |
| 29 | SUPPLY AND APPLICATION OF ONE COAT OF WEATHER PROOF PRIMER AND TWO COATS OF INTERIOR EMULSION OF APPROVED COLOUR SHADE INCLUDING SCAFFOLDING, LABOUR ETC., COMPLETE AT ALL LEVELS. |
| 30 | SAINT GOBAIN GYPROC SUSPENDED CEILING MADE UP OF GYPFRAME TRUE STEEL PERIMETER CHANNEL OF SIZE 0.45MM THICK (ONE FLANGE OF 20MM/30MM AND A WEB OF 27MM) FIXED ALONG WITH PERIMETER CEILING OF BRICK WALL / PARTITION BY USING NYLON SLEEVES AND SCREWS AT 610MM CENTRES, INTERMEDIATE CHANNEL OF SIZE 45MM (0.7MM THICK WITH TWO FLANGES OF 15MM EACH) FROM THE SOFFIT AT 1220MM CENTERS WITH CEILING ANGLE OF WIDTH 25MM X 10MM X 0.45 MM THICK FIXED TO SOFFIT WITH GI CLEAT AND STEEL EXPANSION FASTENERS (MFG BY SAINT GOBAIN GYPROC INDIA), CEILING SECTION OF 0.45MM THICK HAVING KNURLED WEB OF 51.5MM AND TWO FLANGES OF 26MM EACH WITH LIPS OF 10.5MM FIXED WITH INTERMEDIATE CHANNEL WITH THE HELP OF CONNECTING CLIP AND PERPENDICULAR TO THE INTERMEDIATE CHANNEL AT 610MM CENTERS FOR GRID FORMATION WORK. THE SUSPENDED CEILING OF SINGLE LAYER 0F 12.5MM TAPERED EDGE PLAIN GYPBOARD (IS 2095- PART1-1996) IS FIXED WITH CEILING SECTION BY USING 25MM DRYWALL SCREWS AT 230MM CENTERS INCLUDING CEILING LIGHTS OF 24W LED DOWN LIGHT - RD-WH (OPPLE), 100% FLICKER FREE, PRODUCT NAME LUMENS- 100 WATT, CUT HOLE DIA - 8 INCH, OUTER DIA - 9 INCH.AS DIRECTED BY ELECTRICAL ENGINEER INCHARGE. |
| 31 | SUPPLYING, FABRICATION AND FIXING OF 6MM / 8MM TK HPL (HIGH PRESSURE LAMINATES) EXTERIOR GRADE PANELS WITH APPROVED SHADE AND COLOUR FOR FALSE CEILING WITH ALUMINIUM SUPPORTED FRAME WORK WHERE EVER REQUIRED OR DIRECTLY RIVETED ON THE MS FRAMES AS DIRECTED BY ENGINEER INCHARGE.THE FINISHED SURFACE SHALL ONLY BE PAID FOR MEASUREMENTS. Please Enable Macros to View BoQ information |
