|
| 1 | Providing, fitting and testing of Copper thimbles at site |
| 2 | 10 Sq. mm |
| 3 | 16 Sq. mm |
| 4 | 25 Sq. mm |
| 5 | 50 Sq. mm |
| 6 | 90 Sq. mm |
| 7 | 120 Sq. mm |
| 8 | 150 Sq. mm |
| 9 | 185 Sq. mm |
| 10 | 240 Sq. mm |
| 11 | 300 Sq. mm |
| 12 | Providing, fitting and testing of Aluminum thimbles at site |
| 13 | 10 Sq. mm |
| 14 | 16 Sq. mm |
| 15 | 25 Sq. mm |
| 16 | 50 Sq. mm |
| 17 | 90 Sq. mm |
| 18 | 120 Sq. mm |
| 19 | 150 Sq. mm |
| 20 | 185 Sq. mm |
| 21 | 240 Sq. mm |
| 22 | 300 Sq. mm |
| 23 | Providing, fitting of below mentioned item for repairs to 25KVA Voltage Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site. |
| 24 | Copper wire of specific gauge for fabrication of primary / secondary coil |
| 25 | Bush rod with porcelain insulator and packing |
| 26 | Re-taping /re-insulation of coils |
| 27 | T-Oil |
| 28 | Copper strip |
| 29 | Filtration / dehydration of T-oil |
| 30 | Cost of damaged lamination |
| 31 | Providing, fitting of below mentioned item for repairs to 30KVA Voltage Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site. |
| 32 | Copper wire of specific gauge for fabrication of primary / secondary coil |
| 33 | Bush rod with porcelain insulator and packing |
| 34 | Re-taping /re-insulation of coils |
| 35 | T-Oil |
| 36 | Copper strip |
| 37 | Filtration / dehydration of T-oil |
| 38 | Cost of damaged lamination |
| 39 | Providing, fitting of below mentioned item for repairs to 35KVA Voltage Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site. |
| 40 | Copper wire of specific gauge for fabrication of primary / secondary coil |
| 41 | Bush rod with porcelain insulator and packing |
| 42 | Re-taping /re-insulation of coils |
| 43 | T-Oil |
| 44 | Copper strip |
| 45 | Filtration / dehydration of T-oil |
| 46 | Cost of damaged lamination |
| 47 | Providing, fitting of below mentioned item for repairs to 40KVA Voltage Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site. |
| 48 | Copper wire of specific gauge for fabrication of primary / secondary coil |
| 49 | Bush rod with porcelain insulator and packing |
| 50 | Re-taping /re-insulation of coils |
| 51 | T-Oil |
| 52 | Copper strip |
| 53 | Filtration / dehydration of T-oil |
| 54 | Cost of damaged lamination |
| 55 | Providing, fitting of below mentioned item for repairs to 50KVA Voltage Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site. |
| 56 | Copper wire of specific gauge for fabrication of primary / secondary coil |
| 57 | Bush rod with porcelain insulator and packing |
| 58 | Re-taping /re-insulation of coils |
| 59 | T-Oil |
| 60 | Copper strip |
| 61 | Filtration / dehydration of T-oil |
| 62 | Cost of damaged lamination |
| 63 | Providing, fitting of below mentioned item for repairs to 75KVA Voltage Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site. |
| 64 | Copper wire of specific gauge for fabrication of primary / secondary coil |
| 65 | Bush rod with porcelain insulator and packing |
| 66 | Re-taping /re-insulation of coils |
| 67 | T-Oil |
| 68 | Copper strip |
| 69 | Filtration / dehydration of T-oil |
| 70 | Cost of damaged lamination |
| 71 | Providing, fitting of below mentioned item for repairs to 100KVA Voltage Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site. |
| 72 | Copper wire of specific gauge for fabrication of primary / secondary coil |
| 73 | Bush rod with porcelain insulator and packing |
| 74 | Re-taping /re-insulation of coils |
| 75 | T-Oil |
| 76 | Copper strip |
| 77 | Filtration / dehydration of T-oil |
| 78 | Cost of damaged lamination |
| 79 | Providing, fitting of below mentioned item for repairs to 150KVA Voltage Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site. |
| 80 | Copper wire of specific gauge for fabrication of primary / secondary coil |
| 81 | Bush rod with porcelain insulator and packing |
| 82 | Re-taping /re-insulation of coils |
| 83 | T-Oil |
| 84 | Copper strip |
| 85 | Filtration / dehydration of T-oil |
| 86 | Cost of damaged lamination |
| 87 | Providing, fitting of below mentioned item for repairs to 250KVA Voltage Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site. |
| 88 | Copper wire of specific gauge for fabrication of primary / secondary coil |
| 89 | Bush rod with porcelain insulator and packing |
| 90 | Re-taping /re-insulation of coils |
| 91 | T-Oil |
| 92 | Copper strip |
| 93 | Filtration / dehydration of T-oil |
| 94 | Cost of damaged lamination |
| 95 | Providing, fitting of below mentioned item for repairs to 400KVA Voltage Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site. |
| 96 | Copper wire of specific gauge for fabrication of primary / secondary coil |
| 97 | Bush rod with porcelain insulator and packing |
| 98 | Re-taping /re-insulation of coils |
| 99 | T-Oil |
| 100 | Copper strip |
| 101 | Filtration / dehydration of T-oil |
| 102 | Cost of damaged lamination |
| 103 | Providing, fitting of below mentioned item for repairs to 450KVA Voltage Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site. |
| 104 | Copper wire of specific gauge for fabrication of primary / secondary coil |
| 105 | Bush rod with porcelain insulator and packing |
| 106 | Re-taping /re-insulation of coils |
| 107 | T-Oil |
| 108 | Copper strip |
| 109 | Filtration / dehydration of T-oil |
| 110 | Cost of damaged lamination |
| 111 | Providing, fitting of below mentioned item for repairs to 600KVA Voltage Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site. |
| 112 | Copper wire of specific gauge for fabrication of primary / secondary coil |
| 113 | Bush rod with porcelain insulator and packing |
| 114 | Re-taping /re-insulation of coils |
| 115 | T-Oil |
| 116 | Copper strip |
| 117 | Filtration / dehydration of T-oil |
| 118 | Cost of damaged lamination |
| 119 | Providing and fitting of single plate type Voltage regulator including extraction of damaged one, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site. |
| 120 | 150mmx150mm |
| 121 | 225mm x 225mm |
| 122 | 200mm x 200mm |
| 123 | 250mm x 250mm |
| 124 | 450 mm x 450 mm |
| 125 | 300x300 MM |
| 126 | 375mmx 375mm |
| 127 | 600 mm x 600 mm |
| 128 | Providing and fitting of type Voltage regulator including extraction of damaged one, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site. |
| 129 | 450 mm x 450 mm (Single Plate) |
| 130 | 600 mm x 600 mm (Single Plate) |
| 131 | 450 mm x 450 mm (Double Plate) |
| 132 | 600 mm x 600 mm (Double Plate) |
| 133 | Providing and fitting of drum type Voltage regulator including extraction of damaged one, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site. |
| 134 | Providing, fitting and testing of Voltmeters at site |
| 135 | 0-200V |
| 136 | 0-500V |
| 137 | Providing, fitting and testing of Ammeters at site |
| 138 | 0-50A with CT ratio of 5/50 |
| 139 | 0-100A with CT ratio of 5/100 |
| 140 | 0-150A with CT ratio of 5/150 |
| 141 | 0-200A with CT ratio of 5/200 |
| 142 | 0-300A with CT ratio of 5/300 |
| 143 | 0-400A with CT ratio of 5/400 |
| 144 | Providing, fitting and testing of post type drop out set including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site. |
| 145 | Suitable for 25KVA Sub-station |
| 146 | Suitable for 63KVA Sub-station |
| 147 | Suitable for 100KVA Sub-station |
| 148 | Suitable for 250KVA Sub-station |
| 149 | Suitable for 630KVA Sub-station |
| 150 | Suitable for 33KV, 630KVA Sub-station (Heavy duty) |
| 151 | Providing, fitting and testing of link set including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site. |
| 152 | Suitable for 25KVA Sub-station |
| 153 | Suitable for 63KVA Sub-station |
| 154 | Suitable for 100KVA Sub-station |
| 155 | Suitable for 250KVA Sub-station |
| 156 | Suitable for 630KVA Sub-station |
| 157 | Suitable for 33KV, 630KVA Sub-station (Heavy duty) |
| 158 | Providing, fitting and testing of polymer type pin insulator including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site. |
| 159 | Suitable for 11 KV HT line |
| 160 | Suitable for 33 KV HT line |
| 161 | Providing, fitting and testing of heavy duty 33 KV isolator (complete assembly) including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site. |
| 162 | Replacement of damaged knives of isolator including greasing and alignment. The job includes extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site. |
| 163 | Replacement of damaged grip assembly of isolator including greasing and alignment. The job includes extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site. |
| 164 | Providing, fitting and testing of submersible copper cables of below mentioned specifications including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site. |
| 165 | 10 Sq mm |
| 166 | 16 sq mm |
| 167 | 25 sq mm |
| 168 | 35 sq mm |
| 169 | Providing, fitting and testing of copper cables of below mentioned specifications including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site. |
| 170 | 19/0.0064 |
| 171 | 37/0.083 |
| 172 | 61/0.093 |
| 173 | 19/0.044 |
| 174 | Providing, fitting and testing of 3.5 core XLPE aluminum conductor of below mentioned specifications including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site. |
| 175 | 35 Sq. mm |
| 176 | 50 Sq. mm |
| 177 | 70 sq.mm |
| 178 | 95 Sq. mm |
| 179 | 120 Sq. mm |
| 180 | 150 Sq. mm |
| 181 | 185 Sq. mm |
| 182 | 240 sq.mm |
| 183 | 300 sq.mm |
| 184 | Providing, fitting and testing of 11KV post type lightening arrestor including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site. |
| 185 | Providing, fitting and testing of 33KV post type lightening arrestor (heavy duty) including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site. |
| 186 | Providing, fitting and testing of G.O.D set including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site. |
| 187 | Providing, fitting and testing of Cross arms including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site. |
| 188 | Channels 75x40 |
| 189 | Angle iron support |
| 190 | F-top |
| 191 | U Clamps |
| 192 | Guy-wire with turn buckle |
| 193 | Guy-Insulator |
| 194 | Providing, fitting and testing of ACSR Conductor including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site. |
| 195 | Providing, fitting and testing of MCCBs (04 Pole) with breaking capacity of 35KA of approved make as per damaged MCCB at site including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site. |
| 196 | 63 Amps |
| 197 | 100 Amps |
| 198 | 125 Amps |
| 199 | 160 Amps |
| 200 | 200 Amps |
| 201 | 250 Amps |
| 202 | 320 Amps |
| 203 | 400 Amps |
| 204 | 630 Amps |
| 205 | Providing, fitting and testing of MCCBs (04 Pole) with breaking capacity of 50KA of approved make as per damaged MCCB at site including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site. |
| 206 | 63 Amps |
| 207 | 100 Amps |
| 208 | 125 Amps |
| 209 | 160 Amps |
| 210 | 200 Amps |
| 211 | 250 Amps |
| 212 | 320 Amps |
| 213 | 400 Amps |
| 214 | 630 Amps |
| 215 | 800 Amps |
| 216 | Providing, fitting and testing of MCCBs (03 Pole) with breaking capacity of 35KA of approved make as per damaged MCCB at site including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site. |
| 217 | 63 Amps |
| 218 | 100 Amps |
| 219 | 125 Amps |
| 220 | 160 Amps |
| 221 | 200 Amps |
| 222 | 250 Amps |
| 223 | 320 Amps |
| 224 | 400 Amps |
| 225 | 630 Amps |
| 226 | Providing, fitting and testing of MCCBs (03 Pole) with breaking capacity of 50KA of approved make as per damaged MCCB at site including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site. |
| 227 | 63 Amps |
| 228 | 100 Amps |
| 229 | 125 Amps |
| 230 | 160 Amps |
| 231 | 200 Amps |
| 232 | 250 Amps |
| 233 | 320 Amps |
| 234 | 400 Amps |
| 235 | 630 Amps |
| 236 | 800 Amps |
| 237 | Providing, fitting and testing of on load 04 pole Change over switch of approved make as per damaged change over switch at site including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site. |
| 238 | 100 A |
| 239 | 200 A |
| 240 | 300 A |
| 241 | 400 A |
| 242 | 630 A |
| 243 | 800 A |
| 244 | 1000 A |
| 245 | Providing, fitting and testing of Combined volt-ammeter for MU-G starters |
| 246 | 0-30A/0-500V |
| 247 | 0-60A/0-500V |
| 248 | 0-75A/0-500V |
| 249 | 0-100A/0-500V |
| 250 | 0-125A/0-500V |
| 251 | Providing, fitting and testing of 415V Indicating lamps |
| 252 | Yellow |
| 253 | Green |
| 254 | Providing, fitting and testing of 415V Single phase preventor |
| 255 | Providing, fitting and testing of ML contactors for starters |
| 256 | ML 1.5 |
| 257 | ML 10 |
| 258 | ML 12 |
| 259 | Providing, fitting and testing of Power contactors for FASD starters |
| 260 | LCIF 630 |
| 261 | LCIF 400 |
| 262 | LCIF 350 |
| 263 | CK 95 BE-300 |
| 264 | MNX 185 |
| 265 | MNX 325 |
| 266 | AC3-25A |
| 267 | AC3-32A |
| 268 | AC3-40A |
| 269 | AC3-50A |
| 270 | MC X 70 |
| 271 | AC3- 60A |
| 272 | AC3- 63A |
| 273 | AC3- 80A |
| 274 | AC3- 100A |
| 275 | AC3- 115A |
| 276 | AC3- 125A |
| 277 | AC3- 150A |
| 278 | AC3- 185A |
| 279 | AC3- 200A |
| 280 | AC3- 250A |
| 281 | AC3- 265A |
| 282 | AC3- 330A |
| 283 | AC3- 350A |
| 284 | AC3- 400A |
| 285 | Providing, fitting and testing of ML relays |
| 286 | ML1 range 4-6.5 |
| 287 | ML1 range 6-10 |
| 288 | ML1 range 10-16 |
| 289 | ML2/ML3 9-14 |
| 290 | ML2/ML3 13-21 |
| 291 | ML2/ML3 20-32 |
| 292 | ML2/ML3 28-42 |
| 293 | Providing, fitting and testing of FASD Panel accessories |
| 294 | Electronic timer 0- 30Sec |
| 295 | Electronic timer 0- 60Sec |
| 296 | Single Phase Preventer (Three phase type ) |
| 297 | Overload relay 4A-6A |
| 298 | Overload relay 5A-8A |
| 299 | Overload relay 6A-9A |
| 300 | Overload relay 7A-10A |
| 301 | Overload relay 9A-13A |
| 302 | Overload relay 12A-16A |
| 303 | Overload relay 14A-22A |
| 304 | Overload relay 17A-25A |
| 305 | Overload relay 23A-32A |
| 306 | Overload relay 30A-40A |
| 307 | Overload relay 37A-50A |
| 308 | Overload relay 48A-65A |
| 309 | Overload relay 55A-70A |
| 310 | Overload relay 63A-80A |
| 311 | Overload relay 80A-93A |
| 312 | Overload relay 85A- 105A |
| 313 | Overload relay 80A- 115A |
| 314 | Overload relay 125A- 200A |
| 315 | Overload relay 160A- 250A |
| 316 | Overload relay 200A- 315A |
| 317 | Overload relay 250A- 400A |
| 318 | Overload relay 315A- 500A |
| 319 | Overload relay 400A- 630A |
| 320 | Overload relay 500A- 800A |
| 321 | Overload relay 630A- 1000A |
| 322 | Replacement of damaged 1 Sq mm copper power wiring |
| 323 | Providing, fitting and testing of ATS star Delta starter |
| 324 | Pneumatic timer (on delay/off delay) |
| 325 | Electromagnetic power contactor assembly (10A-250A) |
| 326 | Providing, fitting and testing of Contact points of contactors for star/delta starters |
| 327 | Providing, fitting and testing of Terminal block |
| 328 | 30A-5 way |
| 329 | 60A-3 way |
| 330 | 60A-6 way |
| 331 | 100A-3 way |
| 332 | 120A-3 way |
| 333 | Providing, fitting and testing of Power contactor for MU-G starters |
| 334 | MU-G10 |
| 335 | MU-G15 |
| 336 | MU-G20 |
| 337 | MU-G30 |
| 338 | MU-G40 |
| 339 | MU-G50 |
| 340 | MU-G75 |
| 341 | Providing, fitting and testing of controller for MU-G starters |
| 342 | Providing, fitting and testing of Overload relay/under voltage relay for MU-G starters |
| 343 | MU-G10 |
| 344 | MU-G15 |
| 345 | MU-G20 |
| 346 | MU-G30 |
| 347 | MU-G40 |
| 348 | MU-G50 |
| 349 | MU-G75 |
| 350 | Providing and fitting of Air Circuit breaker 630 amp Manual Draw out type |
| 351 | Providing and fitting of Air Circuit breaker 800 amp Manual Draw out type |
| 352 | Providing and fitting of GSM based remote access motor control module complete replacement. Model MPU-LCD |
| 353 | Providing and fitting of Multi-Function Meter Square Dial type. Model 383, Select Make. |
| 354 | Providing, fitting and testing of Motor protection circuit breakers with thermal adjustable ranges from 0-100 amp |
| 355 | 0-32 Amp (16 steps) |
| 356 | 28-63 Amp (03 steps) |
| 357 | 55-100 Amp (03 steps) |
| 358 | Providing and fitting of Water level control relay with capsule modules and wiring 1 Sq mm copper minimum 90 Meters |
| 359 | Nuts and bolts of different size |
| 360 | Selector Switch |
| 361 | Providing, fitting of below mentioned item for repairs to 10KVA to 50KVA Servo Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site. |
| 362 | Replacement of digital micro controlled processor based control card |
| 363 | Replacement of AC syncronous servo motor |
| 364 | Replacement of copper wound motorized auto transformer |
| 365 | Replacement of buck and boost series transformer |
| 366 | Providing, fitting of below mentioned item for repairs to 50KVA to 100KVA Servo Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site. |
| 367 | Replacement of digital micro controlled processor based control card |
| 368 | Replacement of AC syncronous servo motor |
| 369 | Replacement of copper wound motorized auto transformer |
| 370 | Replacement of buck and boost series transformer |
| 371 | Providing and fitting of LED Lamps with angle/straight holders with backlite plate at site |
| 372 | 09 Watt |
| 373 | 15 Watt |
| 374 | Erection of MS tubular 9m/11m tilted pole by way of excavation of new trench and concrete bottoming including fitting/fixing of Departmental ACSR conductor on the insulators |
| 375 | Repairs to VT Motor with rating from 10HP to 50HPDismantling of the VT motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items. |
| 376 | Copper wire used in rewinding the motor. |
| 377 | Associated/consumable items like crimpled paper, sleeves, PVC paper, bamboo sticks, thread, varnish etc. |
| 378 | Repairs to VT Motor with rating above 50HP to 150HP)Dismantling of the VT motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items. |
| 379 | Copper wire used in rewinding the motor. |
| 380 | Associated/consumable items like crimpled paper, sleeves, PVC paper, bamboo sticks, thread, varnish etc. |
| 381 | Repairs to VT Motor with rating above 150HP to 270HP)Dismantling of the VT motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items. |
| 382 | Copper wire used in rewinding the motor. |
| 383 | Associated/consumable items like crimpled paper, sleeves, PVC paper, bamboo sticks, thread, varnish etc. |
| 384 | Repairs to horizontal Motor with rating from 5HP to 50HPDismantling of the horizontal motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items. |
| 385 | Copper wire used in rewinding the motor. |
| 386 | Associated/consumable items like crimpled paper, sleeves, PVC paper, bamboo sticks, thread, varnish etc. |
| 387 | Repairs to horizontal Motor with rating above 50HP to 100HPDismantling of the horiontal motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items. |
| 388 | Copper wire used in rewinding the motor. |
| 389 | Associated/consumable items like crimpled paper, sleeves, PVC paper, bamboo sticks, thread, varnish etc. |
| 390 | Repairs to horizontal Motor with rating above 100HP to 200HPDismantling of the horiontal motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items. |
| 391 | Copper wire used in rewinding the motor. |
| 392 | Associated/consumable items like crimpled paper, sleeves, PVC paper, bamboo sticks, thread, varnish etc. |
| 393 | Repairs to submersible Motor with rating from 2HP to 50HPDismantling of the submersible motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items. |
| 394 | Copper wire used in rewinding the motor. |
| 395 | Gun metal bushes |
| 396 | Ratchet racer assembly |
| 397 | Associated/consumable items like crimpled paper, sleeves, PVC paper, bamboo sticks, thread, varnish etc. |
| 398 | Repairs to submersible Motor with rating from and above 50HP to 75HPDismantling of the submersible motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items. |
| 399 | Copper wire used in rewinding the motor. |
| 400 | Gun metal bushes |
| 401 | Ratchet racer assembly |
| 402 | Associated/consumable items like crimpled paper, sleeves, PVC paper, bamboo sticks, thread, varnish etc. |
| 403 | Repairs to submersible Motor with rating from and above 75HP to 100HPDismantling of the submersible motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items. |
| 404 | Copper wire used in rewinding the motor. |
| 405 | Gun metal bushes |
| 406 | Ratchet racer assembly |
| 407 | Associated/consumable items like crimpled paper, sleeves, PVC paper, bamboo sticks, thread, varnish etc. |
| 408 | Replacing of damages illumination single core multistranded copper wiring |
| 409 | 1 Sq mm |
| 410 | 1.5 Sq mm |
| 411 | 2 Sq mm |
| 412 | 2.5 Sq mm |
| 413 | 4 Sq mm |
| 414 | 6 Sq mm |
| 415 | Providing and fitting of bimetallic tube terminals Al-Cu for cable thicknesses |
| 416 | 10 Sqmm |
| 417 | 16 Sqmm |
| 418 | 18 Sqmm |
| 419 | 25 Sqmm |
| 420 | 35 Sqmm |
| 421 | 50 Sqmm |
| 422 | 90 Sqmm |
| 423 | 120 Sqmm |
| 424 | 150 Sqmm |
| 425 | Providing, fitting and testing of AC power monitor Proton make after extraction of damaged one |
| 426 | Providing, fitting and testing of VAF Meter, Model 39A, after extraction of damaged one |
| 427 | Providing, fitting and testing of motor protection unit MPU-12, Proton make, after extraction of damaged one |
| 428 | Fabrication, providing, fitting and testing of GM bushes to the submersible motors (finished) |
| 429 | Providing and fitting of aluminium bus bar of various sizes |
| 430 | Providing and fitting of copper bus bar of various sizes |
| 431 | Providing and fiting of PVC fans for horizontal motors |
| 432 | 7.50HP to 10HP |
| 433 | 12.50HP to 25HP |
| 434 | 30HP to 60HP |
| 435 | 60HP onwards |
| 436 | Providing and fiting of PVC fans for horizontal motors |
| 437 | 7.50HP to 10HP |
| 438 | 12.50HP to 25HP |
| 439 | 30HP to 60HP |
| 440 | 60HP onwards |
| 441 | Providing, fitting and testing of contactor coils after dismantling of old damamged one |
| 442 | LC1F 350A |
| 443 | LC1F 400A |
| 444 | LC1F 500A |
| 445 | LC1F 630A |
| 446 | Providing, fitting and testing of tripping coil to handle type starter |
| 447 | Upto 30HP |
| 448 | From 40HP to 150HP |
| 449 | 150HP onwards |
| 450 | Providing, fitting and testing of Controller for MU-G starters(single phase preventer/Timer with manual, automatic, byepass function) |
| 451 | MU-G10 |
| 452 | MU-G15 |
| 453 | MU-G20 |
| 454 | MU-G30 |
| 455 | MU-G40 |
| 456 | MU-G50 |
| 457 | MU-G75 |
| 458 | Repairs to open well submersible Pumping Unit with discharge from 3000GPH to 10000 GPH, head from and above 10M but less than 52M with motor rating as 1HP to 7.5HP |
| 459 | Dismantling of the open well submersible pumping unit at site, shifting to workshop, repairing, shifting back to site, re-fitting and successful testing on full load |
| 460 | Complete rewinding of the stator assembly by appropriate gauged copper wire |
| 461 | Cost on account of labour, insulted paper, sleeves etc., used during rewinding with testing |
| 462 | Cost on account of associated consumeable items like crimped paper, sleeves, PVC pipes, bamboo sticks, thread etc. |
| 463 | Replacement of Stain less steel shaft |
| 464 | Replacement of cast iron impeller |
| 465 | Replacement of cast iron volute casing |
| 466 | Providing and fitting of rubber oil seal |
| 467 | Providing and fitting of bronze bushes |
| 468 | Providing and fitting of water oil seal |
| 469 | Providing and fitting of stainless steel thrust pad |
| 470 | Providing and fitting of threaded plastic strainer |
| 471 | Repairs to open well submersible Pumping Unit with discharge from and above 10000GPH to 20000 GPH, head from and above 10M but less than 52M with motor rating from and above 7.5HP to 15HP |
| 472 | Dismantling of the open well submersible pumping unit at site, shifting to workshop, repairing, shifting back to site, re-fitting and successful testing on full load |
| 473 | Complete rewinding of the stator assembly by appropriate gauged copper wire |
| 474 | Cost on account of labour, insulted paper, sleeves etc., used during rewinding with testing |
| 475 | Cost on account of associated consumeable items like crimped paper, sleeves, PVC pipes, bamboo sticks, thread etc. |
| 476 | Replacement of Stain less steel shaft |
| 477 | Replacement of cast iron impeller |
| 478 | Replacement of cast iron volute casing |
| 479 | Providing and fitting of rubber oil seal |
| 480 | Providing and fitting of bronze bushes |
| 481 | Providing and fitting of water oil seal |
| 482 | Providing and fitting of stainless steel thrust pad |
| 483 | Providing and fitting of threaded plastic strainer |
| 484 | Repairs to ATS Starter CoilDismantling of the ATS Starter at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items. |
| 485 | Copper wire used in rewinding |
| 486 | Associated/consumable items like crimpled paper, sleeves, PVC paper, thread, varnish etc. |
| 487 | Providing and fitting of Ball/Thrust bearing (DE & NDE) for different capacity motors and pumps alongwith test certificates |
| 488 | No. 6308 |
| 489 | No. 6309 |
| 490 | No. 6312 |
| 491 | No. 6306 |
| 492 | No. 3206 double groove |
| 493 | No. 5206 double groove |
| 494 | No. 6208 |
| 495 | No. 7309 |
| 496 | No. 6311 |
| 497 | No. 6316 |
| 498 | No. 6318 |
| 499 | No. 2932 8E |
| 500 | No. 29324 |
| 501 | No. 7210 |
| 502 | No. 6319C3 |
| 503 | No. N314 |
| 504 | No. 7220BECB |
| 505 | No. 6310 |
| 506 | No. 6212 |
| 507 | No. 6305 |
| 508 | No. 7312 |
| 509 | No. 6307 |
| 510 | No 29330 E thrust bearing |
| 511 | No. 29322 E thrust bearing |
| 512 | No 29416 E Thrust bearing |
| 513 | No 6313 |
| 514 | No 6314 |
| 515 | No 6315 |
| 516 | No 6020 |
| 517 | No. 8321 |
| 518 | No. 8314 |
| 519 | No. NU318c3 |
| 520 | No. 6321 |
| 521 | No, NU309 |
| 522 | Cost on account of copper scrap (To be deducted in allotment) |
| 523 | Providing, fitting and testing of 6A Switch with box |
| 524 | Providing, fitting of below mentioned item for repairs to up to 1KVA Single Phase Voltage Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site. |
| 525 | Replacement of complete coil and core |
| 526 | Copper rewinding of coil |
| 527 | Set of relays with complete wiring |
| 528 | Cut plate 3 in one |
| 529 | 12-0-12 Transformer |
| 530 | Digital Voltmeter |
| 531 | Neon switches |
| 532 | Regulator for manual stabilizer |
| 533 | Providing, fitting of below mentioned item for repairs to up to 2KVA Single Phase Voltage Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site. |
| 534 | Replacement of complete coil and core |
| 535 | Copper rewinding of coil |
| 536 | Set of relays with complete wiring |
| 537 | Cut plate 3 in one |
| 538 | 12-0-12 Transformer |
| 539 | Digital Voltmeter |
| 540 | Neon switches |
| 541 | Regulator for manual stabilizer |
| 542 | Providing, fitting of below mentioned item for repairs to up to 5KVA Single Phase Voltage Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site. |
| 543 | Replacement of complete coil and core |
| 544 | Copper rewinding of coil |
| 545 | Set of relays with complete wiring |
| 546 | Cut plate 3 in one |
| 547 | 12-0-12 Transformer |
| 548 | Digital Voltmeter |
| 549 | Neon switches |
| 550 | Regulator for manual stabilizer |
| 551 | Providing, fitting of below mentioned item for repairs to up to 10KVA Single Phase Voltage Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site. |
| 552 | Replacement of complete coil and core |
| 553 | Copper rewinding of coil |
| 554 | Set of relays with complete wiring |
| 555 | Cut plate 3 in one |
| 556 | 12-0-12 Transformer |
| 557 | Digital Voltmeter |
| 558 | Neon switches |
| 559 | Regulator for manual stabilizer |
| 560 | CT type overload relay L&T 400-550 |
| 561 | Complete Auxiliary wiring of control panel for single starter unit capacity |
| 562 | 10 HP to 50 HP |
| 563 | 60 HP to 100 HP |
| 564 | 100 HP to 300 HP |
| 565 | Providing, fitting and testing of Push buttons start and stop to FASD Starter |
| 566 | Providing, fitting and testing of Add-On Block to FASD Starter |
| 567 | Providing, fitting and testing of Auxiliary Control Wiring to FASD Starter, Auto Transformer Starter |
| 568 | Providing, fitting and testing of 415Volt Coil/Tripping Coil to Star Delta Starter |
| 569 | Providing, fitting and testing of Contactor Field Coils For ML Series Power Contactor |
| 570 | ML 1.5 380V Ac to 415V Ac |
| 571 | ML-2W 380V Ac to 415V Ac |
| 572 | ML-3W 380VAc To 415V Ac |
| 573 | ML-4W 380V Ac to 415V Ac |
| 574 | ML-6 380V Ac To 415 v Ac |
| 575 | ML-10 380V Ac To 415 V Ac |
| 576 | ML-12 380V Ac To 415 V Ac |
| 577 | Providing, fitting and testing of Contactor Field Coils For ML Series Power Contactor |
| 578 | ML-1.5 |
| 579 | ML 2W |
| 580 | ML 3W |
| 581 | ML -4W |
| 582 | Ml-10 |
| 583 | ML-12 |
| 584 | Providing, fitting and testing of Contactor Field Coils For AC3-LC1F Power Contactor. |
| 585 | Ac3-25A 220V AC To 240 V Ac |
| 586 | Ac3-25A 380V AC To 415 V Ac |
| 587 | Ac3-32A 220V AC To 240 V Ac |
| 588 | Ac3-32A 380V AC To 415 V Ac |
| 589 | Ac3-40A 220V AC To 240 V Ac |
| 590 | Ac3-40A 380V AC To 415 V Ac |
| 591 | Ac3-50A 220V AC To 240 V Ac |
| 592 | Ac3-50A 380V AC To 415 V Ac |
| 593 | Ac3 60A 220V AC To 240 V Ac |
| 594 | Ac3-60A 380V AC To 415 V Ac |
| 595 | Ac3-63A 220V AC To 240 V Ac |
| 596 | Ac3-63A 380V AC To 415 V Ac |
| 597 | Ac3-70A 220V AC To 240 V Ac |
| 598 | Ac3-70A 380V AC To 415 V Ac |
| 599 | Ac3-80A 220V AC To 240 V Ac |
| 600 | Ac3-80A 380VAC To 415 V Ac |
| 601 | Ac3-100A 220V AC To 240V Ac |
| 602 | Ac3-100A 380V Ac To 415 V Ac |
| 603 | Ac3-110A 220V AC To 240 V Ac |
| 604 | Ac3-110A 380V AC To 415 V Ac |
| 605 | Ac3-115A 220V Ac to 240 V Ac |
| 606 | Ac3-115A 380V Ac To 415 V Ac. |
| 607 | Ac3-125A 220V Ac To 240 VAc |
| 608 | Ac3-125A 380V Ac To 415 VAc |
| 609 | Ac3-150A 220V Ac To 240V Ac |
| 610 | Ac3-150A 380V Ac To 415 V Ac. |
| 611 | Ac3-185A 220V Ac To 240 V Ac |
| 612 | Ac3-185A 380 V Ac To 415 V Ac |
| 613 | Ac3-200A 220V Ac To 240V Ac |
| 614 | Ac3-200A 380V Ac To 415 V Ac |
| 615 | Ac3-250A 220V Ac To 240V Ac |
| 616 | Ac3-250A 380V Ac To 415 V Ac |
| 617 | Ac3-265A 220 V ac to 240V Ac |
| 618 | Ac3-265A 380V Ac to 415V Ac |
| 619 | Ac3-350A 220V Ac To 240V Ac |
| 620 | Ac3-350A 380V Ac to 415 v Ac |
| 621 | Ac3-400A 220 V Ac to 240 V Ac |
| 622 | Ac3-400A 380V Ac to 415 V Ac |
| 623 | Ac3-500A 220V Ac To 240V Ac |
| 624 | Ac3-500A 380V Ac To 415 V Ac |
| 625 | AC3-550A 220V Ac To 240 V ac |
| 626 | Ac3-550A 380V Ac To 415 V Ac |
| 627 | Providing, fitting and testing of Contactor Field Coils for MNX Series Power Contactor. |
| 628 | MNX-32A 220V Ac To 240V Ac 50Hz |
| 629 | MNX-32A 380V Ac To 415 V Ac 50Hz |
| 630 | MNX-40A 220V Ac To 240V Ac 50Hz |
| 631 | MNX-40A 380V Ac To 415 V Ac 50Hz |
| 632 | MNX-50A 220V Ac To 240V Ac 50Hz |
| 633 | MNX-50A 380V Ac To 415 V Ac 50Hz |
| 634 | MNX-60A 220V Ac To 240V Ac 50Hz |
| 635 | MNX-60A 380V Ac To 415 V Ac 50Hz |
| 636 | MNX-63A 220V Ac To 240V Ac 50Hz |
| 637 | MNX-63A 380V Ac To 415V Ac 50Hz |
| 638 | MNX-70A 220V Ac to 240 V Ac 50Hz |
| 639 | MNX-70A 380V Ac To 415 V Ac 50Hz |
| 640 | MNX-80A 220V Ac To 240V Ac 50Hz |
| 641 | MNX-80A 380V Ac To 415V Ac 50Hz |
| 642 | MNX-100A 220V Ac To 240V Ac 50Hz |
| 643 | MNX-100A 380V Ac To 415V Ac 50Hz |
| 644 | MNX-110A 220V Ac To 240V Ac 50Hz |
| 645 | MNX-110A 380V Ac To 415V Ac 50Hz |
| 646 | MNX-115A 220V Ac To 240V Ac 50Hz |
| 647 | MNX-115A 380V Ac To 415 V Ac 50Hz |
| 648 | MNX-125A 220V Ac To 240V Ac 50Hz |
| 649 | MNX-125A 380V Ac To 415V Ac 50Hz |
| 650 | MNX-130A 220V Ac To 240V Ac 50Hz |
| 651 | MNX-130A 380V Ac To 415 V Ac 50Hz |
| 652 | MNX-150A 220V Ac To 240V Ac 50Hz |
| 653 | MNX-150A 380V Ac To 415 V Ac 50Hz |
| 654 | MNX-185A 220V Ac To 240V Ac 50Hz |
| 655 | MNX-185A 380V Ac To 415V Ac 50Hz |
| 656 | MNX-200A 220V Ac To 240V Ac 50Hz |
| 657 | MNX-200A 380V Ac To 415V Ac 50Hz |
| 658 | MNX-250A 220V Ac To 240V Ac 50 Hz |
| 659 | MNX-250A 380 V Ac To 415 V Ac 50 Hz |
| 660 | MNX-265A 220V Ac To 240V Ac 50Hz |
| 661 | MNX-265A 380V Ac To 415V Ac 50Hz |
| 662 | MNX-350A 220 V Ac To 240V Ac 50Hz |
| 663 | MNX-350A 380V Ac To 415 V Ac 50 Hz |
| 664 | MNX-400A 110 V Ac 50 Hz |
| 665 | MNX-400A 220 V Ac To 240 V Ac 50 Hz |
| 666 | MNX-400A 380v Ac To 415V Ac 50 Hz |
| 667 | MNX-500A 220V Ac To 240V Ac 50 |
| 668 | MNX-500A 380V Ac To 415V Ac 50Hz |
| 669 | MNX-550A 220V Ac To 240 V Ac 50 hz |
| 670 | MNX-550A 380V Ac To 415V Ac 50 hz |
| 671 | Providing, fitting and testing of MNX Series Power Contactor. |
| 672 | MNX-32A |
| 673 | MNX-40A |
| 674 | MNX-50A |
| 675 | MNX-60A |
| 676 | MNX-63A |
| 677 | MNX-70A |
| 678 | MNX-80A |
| 679 | MNX-100A |
| 680 | MNX-110A |
| 681 | MNX-115A |
| 682 | MNX-125A |
| 683 | MNX-130A |
| 684 | MNX-150A |
| 685 | MNX-185A |
| 686 | MNX-200A |
| 687 | MNX-250A |
| 688 | MNX-265A |
| 689 | MNX-300A |
| 690 | MNX-350A |
| 691 | MNX-400A |
| 692 | MNX-500A |
| 693 | MNX-550A |
| 694 | Providing, fitting and testing of Contact Points sets for Ac3 Power Contactors. |
| 695 | AC3-25A |
| 696 | AC3-32A |
| 697 | Ac3-40A |
| 698 | Ac3-50A |
| 699 | Ac3-60A |
| 700 | Ac3-70A |
| 701 | Ac3-80A |
| 702 | Ac3-100A |
| 703 | Ac3-110A |
| 704 | Ac3-115A |
| 705 | Ac3-125A |
| 706 | Ac3-130A |
| 707 | Ac3-150A |
| 708 | Ac3-185A |
| 709 | Ac3-200A |
| 710 | Ac3-250A |
| 711 | Ac3-265A |
| 712 | Ac3-300A |
| 713 | Ac3-350A |
| 714 | Ac3-400A |
| 715 | Ac3-500A |
| 716 | Ac3-550A |
| 717 | Providing, fitting and testing of Contact points to MNX Contactors. |
| 718 | MNX-40 |
| 719 | MNX-50A |
| 720 | MNX-60A |
| 721 | MNX-63A |
| 722 | MNX-70A |
| 723 | MNX-80A |
| 724 | MNX-110A |
| 725 | MNX-115A |
| 726 | MNX-125A |
| 727 | MNX-130A |
| 728 | MNX-150A |
| 729 | MNX-185A |
| 730 | MNX-200A |
| 731 | MNX-250A |
| 732 | MNX-265A |
| 733 | MNX350A |
| 734 | MNX-400A |
| 735 | MNX-500A |
| 736 | MNX-550A |
| 737 | Providing, fitting and testing of Over-Load Relay to MU-G Starters. |
| 738 | MU-G 10Hp |
| 739 | MU-G 20Hp |
| 740 | MU-G 30Hp |
| 741 | MU-G 50Hp |
| 742 | Mu-G 75Hp |
| 743 | MU-G 100Hp |
| 744 | Providing, fitting and testing of Controller/Timer |
| 745 | MU-G 10Hp |
| 746 | MU-G 20Hp |
| 747 | MU-G 30Hp |
| 748 | Mu-G 50Hp |
| 749 | MU-G 75Hp |
| 750 | MU-G 100Hp Please Enable Macros to View BoQ information |
