Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | (Main Building Guest Hiuse) |
| 2 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil. |
| 3 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres (All kinds of soil) |
| 4 | Providing and laying of stone solling hand Packed including all Carriages |
| 5 | Providing and laying ofCement Concrete excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including curing but excluding cost of centering shuttering, finishing and reinforcement. |
| 6 | Providing and laying of Rainfored Cement Concrete excluding the cost of centring and shuttering. All work upto plinth level with 1:1.5:3 (1 cement : 1.50 coarse sand : 3 graded stone aggregate 20 mm nominal size) including curing but excluding cost of centering shuttering, finishing and reinforcement. |
| 7 | Providing and laying ofCement Concrete excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) |
| 8 | Reinforced cement concrete work in walls including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments etc with 1:1.5:3 (1 cement : 1.50 coarse sand : 3 graded stone aggregate 20 mm nominal size) upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. |
| 9 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in 1:6 mix (1 Cement :6 Course sand) |
| 10 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 11 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 12 | Providing & Fixing of Mild steel Including cutting, bending,Binding anf placing in position using Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 13 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) Using First class kail wood |
| 14 | Providing 40x5 mm flat iron hold fast 22 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 15 | Centering and shuttering including strutting, propping etc. and removal of form for foundation in Footing up to plinth level |
| 16 | Centering and shuttering including strutting, propping etc. and removal of form for Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 17 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, pillars, piers, abutments, posts and struts. |
| 18 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platforms. |
| 19 | Centering and shuttering including strutting, propping etc. and removal of form for Spiral staircases including landings |
| 20 | 12 mm thick cement pluster in 1 : 6 (1 cement : 6 fine sand) on Brick Work in side Room Walls |
| 21 | 6 mm thick cement plaster in 1 : 4 (1 cement : 4 fine sand) in room Ceilling and Stair Steps |
| 22 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 23 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm &sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.) |
| 24 | Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm). Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm). |
| 25 | Providing and Fixing of Door and Shutters of 35 mm thick imported Kail Wood with Walnut Wood Panal of 30 mm thick with groued design of Wood Carving and also including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 30 mm thick |
| 26 | Filling by available excavated earth (excluding rock) in trunches,plinth,sides of fondation etc, in layers not exceding 20 Cm in depth ,consolidation each deposited layer by ramming and watering lead upto 50m and lift upto 1.5 m. |
| 27 | Providing and laying of RBM in rooms including Rmming and all Carriage of materials by MT |
| 28 | Providing and laying ofCement Concrete excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 29 | Providing and laying of 40 mm thick Cement Concrete flooring in 1:2:4 Mix (1 cement : 4 coarse sand : 4) graded stone aggregate 20 mm N/S) |
| 30 | Providing and laying (600x600) mm size Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting of joints with white cement and matching pigments etc. complete (Of Kajaria, Sumania, Nitco or equal to it) |
| 31 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 32 | Providing and fixing of 18/16 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels using Granite of any colour or shade (Area of slab upto 0.5 sqm) |
| 33 | Providing edge moulding to 18/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design for Granite Work |
| 34 | French spirit polishing, Two or more coats on new works including a coat of wood filler |
| 35 | Dry RR Masonry using Nallah Split Stones including bond stones |
| 36 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid. |
| 37 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 38 | Providing and fixing kitchen sink including making all connections excluding cost of fittings White glazed fire clay sink of size 600x450x250 mm. |
| 39 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make |
| 40 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make 15 mm nominal dia |
| 41 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete |
| 42 | Providing and fixing toilet paper holder C.P. brass |
| 43 | Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank ISI : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank |
| 44 | Providing and Fixing of Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc, using PN-16 pipe , 20mm OD(SDR-7.4) |
| 45 | Providing and Fixing of Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc, using PN-16 pipe , 32mm OD(SDR-7.4) |
| 46 | Providing and fixing PPR Unions PPR Union 20mm |
| 47 | Providing and fixing PPR Unions PPR Union 32mm |
| 48 | Providing and Fixing of PVC 100 mm Siol Waste Pipe |
| 49 | Providing and Fixing of PVC 75 mm Soil Waste Pipe |
| 50 | Providing and Fixing of PVC100 mm Plan bend |
| 51 | Providing and Fixing of PVC 75 mm Plan bend |
| 52 | Providing and Fixing of PVC 100 mm Color |
| 53 | Providing and Fixing of PVC 75 mm Color |
| 54 | Providing and Fixing of PVC Vent Pipe with Covel |
| 55 | Providing and Fixing of PVC 100 mm Door Junction |
| 56 | Providing and Fixing of PVC 75 mm Door Bend |
| 57 | Providing and fixing Brass/CP Long Neck bib cock of approved quality 15 mm nominal bore using (jaguar or equal to it) |
| 58 | Providing and fixing Brass/CP stop cock of approved quality 20 mm nominal bore using (jaguar or equal to it) |
| 59 | Providing and Fixing of 15 mm Bore Angle Cock Sink Mixer hot and Cold using (jaguar or equal to it) |
| 60 | Providing and Fixing of CP 15 mm Bore Angle Value of Approved Quality |
| 61 | Providing and Fixing of MS Clamps fpr PVC Pipes |
| 62 | Providing and Fixing of PVC 75 mm Floor Trap |
| 63 | Providing and Fixing of CP jalli |
| 64 | Providing anf Fixing of Beass/ CP Shower Arm with flange 225 mm |
| 65 | Providing and fixing of Brass/C.P. brass shower rose with 15 or 20 mm inlet 150 mm diameter |
| 66 | Providing and Fixing of Brass/ CP Towal Road including Rawal Plug ETC |
| 67 | Providing and Fixing of Brass/ CP Towal Ring including Rawal Plug ETC |
| 68 | Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms. |
| 69 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 70 | Providing and fixing gun metal gate valve with C.I. wheel of approved 20 mm nominal bore |
| 71 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 20 mm nominal bore |
| 72 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete 20 mm dia. |
| 73 | Providing and fixing IS : 1341 marked M.S. heavy weight - Butt Hinges with necessary screws etc., complete 125x90x4.00 mm (for Main Door) |
| 74 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. 250x10 mm (For Main Door) |
| 75 | Providing and fixing bright finished brass handles with screws etc. complete 9.82.1 125 mm (For Main Door) |
| 76 | Providing and fixing aluminum die cast body tubular type universal hydraulic door closer (having brand logo with IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete (For main Door) |
| 77 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarsesand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floatingcoat of neat cement complete as per standard design Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 78 | Providing and Fixing iof 1.50 HP Unidirectional flow Water Motor of make Kirloskar or equlant to it including necessary fitting etc as required |
| 79 | P/F of Structual Steel built up section in truss rfters, Purlines, Tie Beams Gusset Plates ETC including Cutting, Welded hoisting and Placing in Position |
| 80 | Providing of Colour Coated high Rib Profile G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces),excluding the cost of purlins, rafters and trusses and including cutting to size and shape. 0.50mm thick |
| 81 | P/F of Structual Steel built up section in truss rfters, Purlines, Tie Beams Gusset Plates ETC including Cutting, Welded hoisting and Placing in Position using MS Sheet 1 mm thick properly welded |
| 82 | Providing and Fixing of Ridges or hips /valley of width 60cm overall width plain Colour Coted G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 83 | Providing valleys of 90 cm wide overall in plain G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 1.00 mm thick with zinc coating not less than 275 gram/m2 (0.50 mm Sheets) |
| 84 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete On steel work |
| 85 | Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per anufacturer’s specification. (1 kg of water proofing material in 50 kg of cement) |
| 86 | Carriage of sand by MT up to an avariage 25 kms |
| 87 | Carriage of aggrigate by MT up to an avariage 45 kms |
| 88 | Carriage of Bricks by MT up to an avariage 75 kms |
| 89 | Carriage of Stones by MT up to an avariage 20 kms |
| 90 | Carriage of Cement/ Iron by MT up to an avariage 10 kms |
| 91 | Providing and fixing of CIB Sign Board of required Side, Width and hight including applyomg cement Primer and paint and also writing and cost of Photograph |
| 92 | Providing and Fixing of Foundation Stone and Inaugration Stone I/C with Curtain Rods and necessary ancillary itms required at Site Complete Job |
| 93 | ( Security Hut) |
| 94 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil. |
| 95 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres (All kinds of soil) |
| 96 | Providing and laying of stone solling hand Packed including all Carriages |
| 97 | Providing and laying ofCement Concrete excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including curing but excluding cost of centering shuttering, finishing and reinforcement. |
| 98 | Providing and laying of Rainfored Cement Concrete excluding the cost of centring and shuttering. All work upto plinth level with 1:1.5:3 (1 cement : 1.50 coarse sand : 3 graded stone aggregate 20 mm nominal size) including curing but excluding cost of centering shuttering, finishing and reinforcement. |
| 99 | Providing and laying ofCement Concrete excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) |
| 100 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in 1:6 mix (1 Cement :6 Course sand) |
| 101 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 102 | Reinforced cement concrete work in walls including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments etc with 1:1.5:3 (1 cement : 1.50 coarse sand : 3 graded stone aggregate 20 mm nominal size) upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. |
| 103 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 104 | Providing & Fixing of Mild steel Including cutting, bending,Binding anf placing in position using Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 105 | Providing 40x5 mm flat iron hold fast 22 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 106 | Centering and shuttering including strutting, propping etc. and removal of form for foundation in Footing up to plinth level |
| 107 | Centering and shuttering including strutting, propping etc. and removal of form for Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 108 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, pillars, piers, abutments, posts and struts. |
| 109 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platforms. |
| 110 | 12 mm thick cement pluster in 1 : 6 (1 cement : 6 fine sand) on Brick Work in side Room Walls |
| 111 | 6 mm thick cement plaster in 1 : 4 (1 cement : 4 fine sand) in room Ceilling and Stair Steps |
| 112 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 113 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm &sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.) |
| 114 | Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm). Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm). |
| 115 | Filling by available excavated earth (excluding rock) in trunches,plinth,sides of fondation etc, in layers not exceding 20 Cm in depth ,consolidation each deposited layer by ramming and watering lead upto 50m and lift upto 1.5 m. |
| 116 | Providing and laying of RBM in rooms including Rmming and all Carriage of materials by MT |
| 117 | Providing and laying ofCement Concrete excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 118 | Providing and laying of 40 mm thick Cement Concrete flooring in 1:2:4 Mix (1 cement : 4 coarse sand : 4) graded stone aggregate 20 mm N/S) |
| 119 | Providing and laying (600x600) mm size Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting of joints with white cement and matching pigments etc. complete (Of Kajaria, Sumania, Nitco or equal to it) |
| 120 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 121 | Providing and fixing of 16 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels using Granite of any colour or shade (Area of slab upto 0.5 sqm) |
| 122 | Dry RR Masonry using Nallah Split Stones including bond stones |
| 123 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid. |
| 124 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 125 | Providing and fixing kitchen sink including making all connections excluding cost of fittings White glazed fire clay sink of size 600x450x250 mm. |
| 126 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make |
| 127 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete |
| 128 | Providing and fixing toilet paper holder C.P. brass |
| 129 | Providing and Fixing of Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc, using PN-16 pipe , 20mm OD(SDR-7.4) |
| 130 | Providing and Fixing of Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc, using PN-16 pipe , 32mm OD(SDR-7.4) |
| 131 | Providing and fixing PPR Unions PPR Union 20mm |
| 132 | Providing and fixing PPR Unions PPR Union 32mm |
| 133 | Providing and Fixing of PVC 100 mm Siol Waste Pipe |
| 134 | Providing and Fixing of PVC 75 mm Soil Waste Pipe |
| 135 | Providing and Fixing of PVC100 mm Plan bend |
| 136 | Providing and Fixing of PVC 75 mm Plan bend |
| 137 | Providing and Fixing of PVC 100 mm Color |
| 138 | Providing and Fixing of PVC 75 mm Color |
| 139 | Providing and Fixing of PVC Vent Pipe with Covel |
| 140 | Providing and Fixing of PVC 100 mm Door Junction |
| 141 | Providing and Fixing of PVC 75 mm Door Bend |
| 142 | Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank ISI : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank |
| 143 | Providing and fixing Brass/CP Long Neck bib cock of approved quality 15 mm nominal bore using (jaguar or equal to it) |
| 144 | Providing and Fixing of 15 mm Bore Angle Cock Sink Mixer hot and Cold using (jaguar or equal to it) |
| 145 | Providing and Fixing of 15 mm Bore Angle Cock Sink Mixer hot and Cold using (jaguar or equal to it) |
| 146 | Providing and Fixing of CP 15 mm Bore Angle Value of Approved Quality |
| 147 | Providing and Fixing of MS Clamps fpr PVC Pipes |
| 148 | Providing and fixing CP stop cock of approved quality 20 mm nominal bore using (jaguar or equal to it) |
| 149 | Providing and Fixing of PVC 75 mm Floor Trap |
| 150 | Providing and Fixing of CP jalli |
| 151 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarsesand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floatingcoat of neat cement complete as per standard design Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 152 | Providing and Fixing iof 1.50 HP Unidirectional flow Water Motor of make Kirloskar or equlant to it including necessary fitting etc as required |
| 153 | P/F of Structual Steel built up section in truss rfters, Purlines, Tie Beams Gusset Plates ETC including Cutting, Welded hoisting and Placing in Position |
| 154 | Providing of Colour Coated high Rib Profile G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces),excluding the cost of purlins, rafters and trusses and including cutting to size and shape. 0.50mm thick |
| 155 | P/F of Structual Steel built up section in truss rfters, Purlines, Tie Beams Gusset Plates ETC including Cutting, Welded hoisting and Placing in Position using MS Sheet 1 mm thick properly welded |
| 156 | Providing and Fixing of Ridges or hips /valley of width 60cm overall width plain Colour Coted G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 157 | Providing valleys of 90 cm wide overall in plain G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 1.00 mm thick with zinc coating not less than 275 gram/m2 (0.50 mm Sheets) |
| 158 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete On steel work |
| 159 | Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per anufacturer’s specification. (1 kg of water proofing material in 50 kg of cement) |
| 160 | Carriage of sand by MT up to an avariage 25 kms |
| 161 | Carriage of aggrigate by MT up to an avariage 45 kms |
| 162 | Carriage of Bricks by MT up to an avariage 75 kms |
| 163 | Carriage of Stones by MT up to an avariage 20 kms |
| 164 | Carriage of Cement/ Iron by MT up to an avariage 10 kms |
| 165 | (Watch Tower 3 Nos) |
| 166 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil. |
| 167 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres (All kinds of soil) |
| 168 | Providing and laying of stone solling hand Packed including all Carriages |
| 169 | Providing and laying ofCement Concrete excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including curing but excluding cost of centering shuttering, finishing and reinforcement. |
| 170 | Providing and laying of Rainfored Cement Concrete excluding the cost of centring and shuttering. All work upto plinth level with 1:1.5:3 (1 cement : 1.50 coarse sand : 3 graded stone aggregate 20 mm nominal size) including curing but excluding cost of centering shuttering, finishing and reinforcement. |
| 171 | Reinforced cement concrete work in walls including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments etc with 1:1.5:3 (1 cement : 1.50 coarse sand : 3 graded stone aggregate 20 mm nominal size) upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. |
| 172 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in 1:6 mix (1 Cement :6 Course sand) |
| 173 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 174 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 175 | Providing & Fixing of Mild steel Including cutting, bending,Binding anf placing in position using Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 176 | Providing 40x5 mm flat iron hold fast 22 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 177 | Centering and shuttering including strutting, propping etc. and removal of form for foundation in Footing up to plinth level |
| 178 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, pillars, piers, abutments, posts and struts. |
| 179 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platforms. |
| 180 | Centering and shuttering including strutting, propping etc. and removal of form for Spiral staircases including landings |
| 181 | 12 mm thick cement pluster in 1 : 6 (1 cement : 6 fine sand) on Brick Work in side Room Walls |
| 182 | 6 mm thick cement plaster in 1 : 4 (1 cement : 4 fine sand) in room Ceilling and Stair Steps |
| 183 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 184 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm &sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.) |
| 185 | Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm). Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm). |
| 186 | Providing and laying of 40 mm thick Cement Concrete flooring in 1:2:4 Mix (1 cement : 4 coarse sand : 4) graded stone aggregate 20 mm N/S) |
| 187 | P/F of Structual Steel built up section in truss rfters, Purlines, Tie Beams Gusset Plates ETC including Cutting, Welded hoisting and Placing in Position |
| 188 | Providing of Colour Coated high Rib Profile G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces),excluding the cost of purlins, rafters and trusses and including cutting to size and shape. 0.50mm thick |
| 189 | P/F of Structual Steel built up section in truss rfters, Purlines, Tie Beams Gusset Plates ETC including Cutting, Welded hoisting and Placing in Position using MS Sheet 1 mm thick properly welded |
| 190 | Providing and Fixing of Ridges or hips /valley of width 60cm overall width plain Colour Coted G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 191 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete On steel work |
| 192 | Carriage of sand by MT up to an avariage 25 kms |
| 193 | Carriage of aggrigate by MT up to an avariage 45 kms |
| 194 | Carriage of Bricks by MT up to an avariage 75 kms |
| 195 | Carriage of Cement/ Iron by MT up to an avariage 10 kms |
| 196 | (Toilet Block) |
| 197 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil. |
| 198 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres (All kinds of soil) |
| 199 | Providing and laying of stone solling hand Packed including all Carriages |
| 200 | Providing and laying ofCement Concrete excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including curing but excluding cost of centering shuttering, finishing and reinforcement. |
| 201 | Providing and laying of Rainfored Cement Concrete excluding the cost of centring and shuttering. All work upto plinth level with 1:1.5:3 (1 cement : 1.50 coarse sand : 3 graded stone aggregate 20 mm nominal size) including curing but excluding cost of centering shuttering, finishing and reinforcement. |
| 202 | Providing and laying ofCement Concrete excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) |
| 203 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in 1:6 mix (1 Cement :6 Course sand) |
| 204 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 205 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 206 | Providing & Fixing of Mild steel Including cutting, bending,Binding anf placing in position using Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 207 | Providing 40x5 mm flat iron hold fast 22 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 208 | Centering and shuttering including strutting, propping etc. and removal of form for foundation in Footing up to plinth level |
| 209 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platforms. |
| 210 | 12 mm thick cement pluster in 1 : 6 (1 cement : 6 fine sand) on Brick Work in side Room Walls |
| 211 | 6 mm thick cement plaster in 1 : 4 (1 cement : 4 fine sand) in room Ceilling and Stair Steps |
| 212 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 213 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm &sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.) |
| 214 | Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm).Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm). |
| 215 | Filling by available excavated earth (excluding rock) in trunches,plinth,sides of fondation etc, in layers not exceding 20 Cm in depth ,consolidation each deposited layer by ramming and watering lead upto 50m and lift upto 1.5 m. |
| 216 | Providing and laying of RBM in rooms including Rmming and all Carriage of materials by MT |
| 217 | Providing and laying ofCement Concrete excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 218 | Providing and laying of 40 mm thick Cement Concrete flooring in 1:2:4 Mix (1 cement : 4 coarse sand : 4) graded stone aggregate 20 mm N/S) |
| 219 | Providing and laying (600x600) mm size Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting of joints with white cement and matching pigments etc. complete (Of Kajaria, Sumania, Nitco or equal to it) |
| 220 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 221 | Dry RR Masonry using Nallah Split Stones including bond stones |
| 222 | Providing and fixing white vitreous china pedestal type (Europeantype/wash down type) water closet pan. |
| 223 | Providing and fixing of Indian typewhite vitreous china water closet squatting pan Long pattern W.C. pan of size 580 mm |
| 224 | Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. |
| 225 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make |
| 226 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265mm sizes respectively. |
| 227 | Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank ISI : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank |
| 228 | Providing and fixing of Rectangular shape 453x357 mm mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing |
| 229 | Providing and Fixing of Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc, using PN-16 pipe , 20mm OD(SDR-7.4) |
| 230 | Providing and Fixing of Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc, using PN-16 pipe , 32mm OD(SDR-7.4) |
| 231 | Providing and fixing PPR Unions PPR Union 20mm |
| 232 | Providing and fixing PPR Unions PPR Union 32mm |
| 233 | Providing and Fixing of PVC 100 mm Siol Waste Pipe |
| 234 | Providing and Fixing of PVC 75 mm Soil Waste Pipe |
| 235 | Providing and Fixing of PVC100 mm Plan bend |
| 236 | Providing and Fixing of PVC 75 mm Plan bend |
| 237 | Providing and Fixing of PVC 100 mm Color |
| 238 | Providing and Fixing of PVC 75 mm Color |
| 239 | Providing and Fixing of PVC Vent Pipe with Covel |
| 240 | Providing and Fixing of PVC 100 mm Door Junction |
| 241 | Providing and Fixing of PVC 75 mm Door Bend |
| 242 | Providing and fixing Brass/ CP bib Long Neck cock of approved quality 15 mm nominal bore using (jaguar or equal to it) |
| 243 | Providing and fixing Beass/ CP bib Angle Value of approved quality 15 mm nominal bore using (jaguar or equal to it) |
| 244 | Providing and Fixing of MS Clamps fpr PVC Pipes |
| 245 | Providing and fixing CP stop cock of approved quality 20 mm nominal bore using (jaguar or equal to it) |
| 246 | Providing and Fixing of PVC 75 mm Floor Trap |
| 247 | Providing and Fixing of CP jalli |
| 248 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarsesand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floatingcoat of neat cement complete as per standard design Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 249 | Providing and Fixing iof 1.50 HP Unidirectional flow Water Motor of make Kirloskar or equlant to it including necessary fitting etc as required |
| 250 | P/F of Structual Steel built up section in truss rfters, Purlines, Tie Beams Gusset Plates ETC including Cutting, Welded hoisting and Placing in Position |
| 251 | Providing of Colour Coated high Rib Profile G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces),excluding the cost of purlins, rafters and trusses and including cutting to size and shape. 0.50mm thick |
| 252 | P/F of Structual Steel built up section in truss rfters, Purlines, Tie Beams Gusset Plates ETC including Cutting, Welded hoisting and Placing in Position using MS Sheet 1 mm thick properly welded |
| 253 | Providing and Fixing of Ridges or hips /valley of width 60cm overall width plain Colour Coted G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 254 | Providing valleys of 90 cm wide overall in plain G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 1.00 mm thick with zinc coating not less than 275 gram/m2 (0.50 mm Sheets) |
| 255 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete On steel work |
| 256 | Carriage of sand by MT up to an avariage 25 kms |
| 257 | Carriage of aggrigate by MT up to an avariage 45 kms |
| 258 | Carriage of Bricks by MT up to an avariage 75 kms |
| 259 | Carriage of Stones by MT up to an avariage 20 kms |
| 260 | Carriage of Cement/ Iron by MT up to an avariage 10 kms Please Enable Macros to View BoQ information |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
