|
| 1 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth upto 300mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials to be used or auctioned upto a lead of 1000metres including removal and disposal of top organic soil not exceeding 150mm in thickness as per Clause 201 of MoRT&H Specifications for Road & Bridge works (5th Revision) & including cost, conveyance, taxes, cess,royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 2 | Earthwork in excavation of foundation in all kind of soil (Hard Soil & Ordinary Soil) within 50m initial lead and 1.5m, initial lift including shoring,shuttering, propping bullahs, piling,dewatering from foundation, with & working pumps & staking the excaveted materials away from the working area including rough dressing the bed and foundation tranches to required size including cost, conveyance, taxes, cess, royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge (Excavation up to 1.5m height) |
| 3 | Supplying and filling in foundation and plinths with sand well watered and compacted including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, DMF, EMF, Additonal Charges, watering, sundries, tools and plants, etc., complete as per the direction of the Engineer-in-charge. |
| 4 | Providing and laying plain cement concrete (1:3:6)(using branded cement) in foundation using 4 cm size hard crusher broken granite metal of approved quality from approved quarry including mixing, lowering, laying and compacting to proper thickness, watering and curing for the required period including cost of all material, labour, conveyance, loading and unloading, taxes,cess, royalties, DMF, EMF, Additonal Charges, scaffolding, watering, curing, sundries, tools and plants,etc. ,complete as per the direction of the Engineer-in-charge. |
| 5 | Filling foundation and plinth with excavated earth ramming etc complete as per approved drawing and technical specifications complete in all respect & as per direction of the Engineer-in-Charge. |
| 6 | Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum conpressive strength (in work test) 250 Kg/ Square cm. in 15cm cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12mm to 20mm size black hard crushed broken granites stone chips and screened and washed sharp sand for mortary of approved quality from approved quarry, washed and cleaned (20 mm. size chips not to exceed 25%) to be mized in concrete mixture with portland slag cement (PSC) including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necesary incuding cost, conveyance, loading, unloading, royalties, DMF, EMF, Additonal Charges and taxes of all materials with cost of all labours, sundries, T & P required for the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per the direction of the Engineer-in-charge. i) RCC Footing |
| 7 | ii) R.C.C Plinth Band |
| 8 | iii) R.C.C Columns Ground Floor |
| 9 | iv) R.C.C Columns First Floor |
| 10 | v) RCC Beam Ground Floor |
| 11 | vi) R.C.C Lintel Ground Floor |
| 12 | vii) R.C.C Sill Ground Floor |
| 13 | viii) R.C.C Chajja Ground Floor |
| 14 | ix) R.C.C Roof Slab Ground Floor |
| 15 | Supplying steel i.e. Tor Steel / HYSD Bars conforming IS-1786 including straightening, cutting, bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (Linear measurement will be taken and quantity will be calculated on standard weight of tor steel / HYSD bars for all heights) complete as per specification & direction of Engineer-in-charge.a) Ground Floor |
| 16 | b) First Floor |
| 17 | Providing 2.5cm thick Grading Concrete over roof slab with cement concrete (1:2:2) (Using Branded Cement) using 4.7mm size hard granite crusher broken chips and screened & washed sharp sand and finished smooth to the rough surface of roof slab including watering and curing with cost, conveyance, royalties, DMF, EMF, Additonal Charges and taxes of all materials with cost of all labour, labour cess and T&P required for the work etc. complete in all respect as per specification & direction of Engineer-in-charge.a) Ground Floor |
| 18 | Fly Ash brick masonry in cement mortar (1:6) (Using Branded Cement) in foundation & plinth using Fly Ash bricks of 25x12x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties, DMF, EMF, Additonal Charges and taxes of all materials with all labour,labour cess and T & P required for the work complete in all respect as per specification & direction of Engineer-in-charge. |
| 19 | Providing Fly Ash brick masonry work in super structure using 25 X 12 X 8 cm (with dimensional tolerance of ± 2% ) Fly Ash bricks having crushing strength not less than 75 kg. / sq cm, mortar of mix 1:6 (1 cement : 6 sand),(using branded cement) immersing the bricks for minimum 6 hrs in water before use, with all necessary projections, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, DMF, EMF, Additonal Charges,scaffolding, watering, curing, sundries, tools and plants,etc., complete as per the direction of the Engineer-in-charge.a) Ground Floor |
| 20 | b) First Floor |
| 21 | Providing 12 mm thick cement mortar 1:6 (1 cement : 6 sand )(using branded cement) to outside surface / plumbed surface of masonry, raking out joints, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumb and levels and providing grooves or beads where ever necessary, including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, DMF, EMF, Additonal Charges, scaffolding, watering. curing, sundries, tools and plants etc. complete as per the direction of the Engineer-in-charge.a) Ground Floor |
| 22 | Providing 16 mm thick cement plaster with cement mortar of mix (1:6) (Using Branded Cement) with screened and washed sharp sand for mortar and finished smooth to the inside rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves or beads where ever necessary with cost, conveyance, royalties, DMF, EMF, Additonal Charges and taxes of all materials with cost of all labour, labour cess, T&P, and scaffolding required for the work etc. complete in all respect as per specification & direction of Engineer-in-charge.a) Ground Floor |
| 23 | Providing 6 mm thick cement plaster (1:4)(1 cement : 4 sand ) (using branded cement)to RCC surfaces finished smooth including closed deep chiping and slury treatment., raking out joints, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumb and levels and providing grooves or beads where ever necessary, including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, DMF, EMF, Additonal Charges, scaffolding, watering. curing, sundries, tools and plants etc. complete as per the direction of the Engineer-in-charge.a) Ground Floor |
| 24 | Supplying, fitting and fixing vitrified tile of size 600mm x 1200mm of approved make a shade (Orient Bell, Somany, Kajaria, Johnson) in floor on 20mm thick bed of C.M. (1:4) (Using Branded Cement) and filling the joint with white cement mixed with pigment to match the shades of the tile including washing and cleaning with oxalic acid complete including cost of all materials, taxes, labour, labour cess, DMF, EMF, Additonal Charges T&P etc. required for the work complete in all respect as per specification & direction of Engineer-in-charge.a) Ground Floor |
| 25 | Providing, fitting, fixing vitrified tiles of size 600mm x 1200mm of approved make (Orient Bell, Somany, Kajaria, Johnson) in dados skirting and risers of steps on 12mm thick cement plaster (1:3) (Using Branded Cement) jointed with neat cement mixed with pigment to match the shades of the tiles including washing and cleaning with oxalic acid and polishing etc. complete with cost, conveyance, royalties and taxes of all materials all labour,labour cess complete in all respects as per specification & direction of Engineer-in-charge.a) Ground Floor |
| 26 | Providing supplying, fitting, fixing of granite tile in flooring on 20mm thick bed of C.M (1:3) (1 cement : 3 sand) jointed with neat cement slurry mixed with pigment to match the shades of the tile including watering & curing with cost, conveyance, royalty, DMF, EMF, Additional Charges and taxes of all materials and labour with T&P required for the work etc. complete as per direction of Engineer-in-charge. |
| 27 | Providing supplying, fitting, fixing of granite wall tiles 20mm thick in dado, skirting and rises of steps on 12mm thick C.P (1:3) (1 cement : 3 sand) jointed with neat cement slurry mixed with pigment to match the shades of the tiles with cost, conveyance, royalty, DMF, EMF, Additional Charges and taxes of all materials and labour with T&P required for the work etc. complete as per direction of Engineer-in-Charge. |
| 28 | Providing and fixing ISI marked 32 mm thick flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak three ply veneering with vertical grains or cross bands and face veneers on both faces of shutters of approved design including cost of all door fittings and fixtures etc. complete etc including cost of all materials, hardware fittings, labour, conveyance, loading and unloading, taxes, cess, royalties, scaffolding, sundries, tools and plants etc. complete as per the direction of the Engineer-in-charge.All Floor |
| 29 | Providing and fixing of 65mm x 125mm factory made single extruded WPC Wood Polymer Composite solid door, window / ceosetory windows and other frames / Chowkatha comprising of virgin PVC polymer of K value 58/60 (Suspension Grade), Calcium carbonate and natural fibers (Wood powder rice huskwheat husk) and nonb toxic additives (Maximum toxicity index of 12 for 100 gms) fabricated fabricated with joints after applying PVC solvent cement and screwed wih full body threaded star headed $S screw having minimum frame density of 750 Kg/cum, screw wihtdrawal strength of 2200 N (face) and 1100 N (edge), Minium compressive strength of 58 Nmm2, Modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being terminte / borer proof, waterimoisture proof and fire retardant and fixed in position with M.S. hold fastlugs /SS das fasterners of required dia and length including cost of all materials, conveyance, royalties, taxes, cess, labour, scaffolding, watering, curing, sundries, T&P etc. complete as per the direction of the Engineer-in-charge. |
| 30 | Supplying, installation of pressed steel window of specific dimension and accessories such as hinges ,door stopper,tower bolt,door handle,door closer,dead lock,consedaled flush bolt,shaft lock,martise lock and vision panel etc. complete as mentioned along with warranty coverrage and after sales service etc inclusive of all cost ,taxes,cost of delivery charges,fixing ,fitting and any other invidential charges etc.complete. (Ground Floor) |
| 31 | Supply and fixing of Un-plasticised Poly Vinyl Chloride (UPVC) Top-Hung Ventilator of NCL VEKA LTD./ FENESTA / KOMMERLING or equivalent three track - only two glass shutters sliding duly manufactured using UPVC reinforced profiles of 80mm x 52mm x 2.25mm or equivalent for outer frames, 54mm x 38mm x 2.25mm or equivalent for sliding shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2mm prefabricated & welded through fusion welding the window sash shall be fitted with 5mm thick clear float glass (toughened) of reputed make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 no., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing / deglazing at site with 10 years manufactures warranty for discoloration, wraping, mechanical failures, shrinkages, rotting, corrosion etc. with a quality certificate from relevant department of Govt. of India, including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing complete for finished item of work (structural requirements profiles are to be got approved by the Engineer-in-Charge of the work before fabrication of the shutter) as per specification and direction of the Engineer-in-Charge (Ground Floor) |
| 32 | Supplying, fitting, fixing of Un- plasticised poly Vinyl Chloride (UPVC) (FENESTA/ NCL VEKA LTD.) Casement Toilet Door- 60- Series duly manufactured using UPVC reinforfrced profiles of 60mm x 55mm x 2.5mm for outer frames, 102mm x 60mm x 2.5mm for casement Door sash profile and 74mm x 60mm x 2.5mm mullion profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 2.0mm prefabricated & welded through fusion welding the door sash shall be fitted with 12mm thick WPC Board of Greenply make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No. per set of sashes, and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing / deglazing at site etc. including cost and conveyance of all materials, accessories, labour charges, materials and product conforming to ASTM D 638-14, EN- 477-95 and other applicable codes and standards. (Toilet Door) |
| 33 | Supplying, Fitting & Fixing M.S. Grill, Grills gates, MS gates, garage door, collapsible gates with top and bottom rails, steel windows, critical frames for windows, stair case and parapet railing made out of MS Square bar / flat including stair case hand railing with 40mm dia GI pipe etc. including drilling holes in walls priming the grill with red oxide primer including cost ,conveyance, taxes of all material, labour ,cess required for the work complete as per the direction of the Engineer-in-charge.Ground Floor |
| 34 | Finishing wall surface of walls with Acrylic wall putty of approved make and finished smooth and even surface to receive painting including cost of scaffolding & staging charges with,cost of all materials, taxes, cess, labour, conveyance, royalties, watering, curing, tools and plants, etc. complete, as per the direction of the Engineer-in-charge.Ground Floor |
| 35 | Finishing wall surface with painting two coats with Weather coat paint (1st quality) exterior grade over a coat of Cement Primer (Water based) of approved make & approved shade to make an even finished surface in all floors and heights with all scaffolding and staging charges including cost, conveyance, cess, taxes of all materials, cost of all labours, T & P, sundries etc. as required for the work complete in all respect as per the direction of the Engineer-in-Charge. Ground Floor |
| 36 | Providing and applying painting over the plastered surfaces with 2 coats of Plastic emulsion paint over a coat of Cement primer of approved quality and shade, using the required quantity of Plastic emulsion paint as specified by the manufacturer to give an even shade including cost of all materials, labour, conveyance, taxes, cess, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., complete as per the direction of the Engineer-in-charge.Ground Floor |
| 37 | Painting two coats with Synthetic enamel paint of approved quality and shade over a coat of primer (Red Oxide Primer) on surfaces as specified below Steel Surface) to give an even shade with 2 coats of approved quality paint, including cost of all materials, labour, conveyance, taxes, cess, royalties, scaffolding. watering, curing, sundries. tools and plants, etc., complete as per the direction of the Engineer-in-charge.Ground Floor |
| 38 | Supply & installation of Slats in wall panelling are made of pinewood E1 grade fiberboard, Melamine laminated finish, groove perforated slats L16-3/L23-3/L32-3/Customized (3mm grooves Slats @16mm centres) back lined with black acoustical fleece, tongue-groove edge for a seamless look, of size 192 & 128x2440x15/17mm thick having base density 700Kg - 800 Kg/m3, weight 12Kgs/m2 installed by using GI strut system. The GI strut system includes GI Cross channel having thickness 0.45mm, length 3600mm, knurled web 40mm, depth 10mm and equal flanges 15mm is fastened vertically/horizontally at every 600mm centres. Aluminium core cross channel (CC18) having thickness 0.5mm, length 2400mm, web 15mm & 27mm, depth 18mm and flanges of 7mm with suitable edge & centre brackets is then fixed perpendicular to the CC25with the help of fasteners at every 400mm centres. Slats of size 192 & 128x 2430x15/17mm in then fixed perpendicular to CC18 with suitable edge & centre brackets. Contractor to provide expansion joints of 3mm at every 5mtrs both ways. Panels shall be back lined with acoustical infill of 1000gsm x 50mm thick adhered to the wall using Stick adhesive Technical Parameters: i) Core Variants Wood Core E1 Fibreboard ii) Fire Class A iii) Acoustics NRC up to 0.75 iv) Climate (OC RH) 50, 70 v) Green (RC %) 25 vi) Strength, Load capacity (Kg) Ball-Impact inatallation as per direction of EIC. (Make Armstrong/Hunter Douglus/Anutone) |
| 39 | PH. WorksSupplying all materials , labour, T&P and providing and fixing to wall or ceiling and floor C-PVC pipes conforming to IS:15778, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe wiht ciamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints and G.I pipe fittings of the following nominal bore with clamps including making good the wall,ceiling and floor ,testing all complete as per P.H. specification and direction of Engineer-in-charge20mm dia C- PVC Pipe |
| 40 | 25mm dia C- PVC Pipe |
| 41 | 32mm dia C- PVC Pipe |
| 42 | 40mm dia C- PVC Pipe |
| 43 | 50mm dia C- PVC Pipe |
| 44 | Supplying all materials,labour,T&P and cutting holes through existing brick work including making good the damages in cement mortar(1:4) for taking GI pipes and fittings/PVC pipes and fittings etc.all complete as per PH specification and direction of the Engineer-in-charge.250mm thick wall |
| 45 | Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge |
| 46 | Supplying all materials , labour, T&P and cutting grooves in pucca floors and walls for taking P.V.C pipes and G.I fittings etc. and making good the damages including finishing complete as per P.H. specification and direction of Engineer-in-charge |
| 47 | Supplying all materials , labour, T&P and fitting and fixing brass/CP fittings of following nominal bore with supply of all jointing materials complete as per P.H. specification and direction of Engineer-in-charge15mm dia. C.P angle stop cock ( Jaquar make )AQT-GRF-3053 |
| 48 | 15mm dia.long body C.P bib cock ( Jaquar make ) SQT-ESS-512ANKN |
| 49 | 15mm dia. Two way C.P bib cock ( Jaquar make )TQT-ESS-512AN |
| 50 | 15mm dia. C.P Health Faucet( Jaquar make) ALD-ABR-563 |
| 51 | 15mm dia. C.P concealed stop cock ( Jaquar make) ALD-CHR-087FT |
| 52 | 15mm dia. C.P swan neck pillar cock ( Jaquar make)ARI-MCH-39011 |
| 53 | 25mm dia. Brass Full Way Valve ( Shakti make ) |
| 54 | 32mm dia. Brass Full Way Valve ( Shakti make ) |
| 55 | 40mm dia. Brass Full Way Valve ( Shakti make ) |
| 56 | 50mm dia. Brass Full Way Valve ( Shakti make ) |
| 57 | 15mm dia. C.P extension piece |
| 58 | 125mm dia CP gratting |
| 59 | 15mm dia. C.P flange |
| 60 | Supplying all materials ,labour ,T&P and fitting and fixing CP shower with 15mm or 20mm inlet including polishing etc.all complete as per specification and direction of Engineer-in-charge15mm dia CP revolving shower(Jaquar make )CON-281KN |
| 61 | Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 2.60m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge 2000 ltrs capacity rotational moulded polyethylene cylindrical vertical water storage tank |
| 62 | Supplying all materials,labour,T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No.13592/1992 to walls with nails,bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification,testing,earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of Engineer-in-charge110mm dia. U-PVC SWR pipes(Ori-plast make Type-A) |
| 63 | 110mm dia. U-PVC \\"P\\" trap |
| 64 | 110mm dia. U-PVC door bend |
| 65 | 110mm dia. U-PVC plain bend |
| 66 | 110mm dia. U-PVC offset without ear |
| 67 | 110mm dia. U-PVC vent cowl |
| 68 | 110mm dia. U-PVC plain tee |
| 69 | 110mm dia. U-PVC door tee |
| 70 | 110mm dia. U-PVC door cross tee |
| 71 | 110mm dia. U-PVC plain shoe bend |
| 72 | 110mm dia. U-PVC Socket |
| 73 | Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC / HCI pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge250mm to 375mm thick wall |
| 74 | Supplying all materials , labour, T&P and cutting of RCC roof or cornice for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 75 | Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 76 | Supplying all materials,labour,T&P and fitting and fixing vitrous Chaina washed down water Closet (European type water closet - EWC) with integral \\"P\\" or \\"S\\" type trap to the floor including wodden plug and chromoum plated screw including jointing the trap with soil pipe in CM(1:1) fixing plastic seat cover for washed down water closet with crmium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of Engineer-in-charge.Single Piece European Water Clost \\"S\\" trap(Hindware white)(Element Star Rated) |
| 77 | Supplying all materials,labour,T&P and Bowl pattern urinal of the following sizes including connecting the urinal with 32mm dia PVC waste pipe 910mm long by means of white lead mixed with chopped hemp, fixing 32mm dia cp dome west,15mm dia cp spreader including cutting holes in wall and making good the damages with supply of wooden plugs,screws and cement etc. all complete as per specification and direction of the Engineer-in-charge.Half stall urinal .(Hindware make) |
| 78 | Supplying all materials,labour,T&P and fixing vitreous china squatting plate of following sizes with integral longitudinal flushing pipe including cutting the floor and mending good the damages embedding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete(1:5:10) using 40mm hard granite metal, including 6 mm thick white cement finishing at the top of the urinal foot plate etc. all complete as per specification and direction of the Engineer-in-charge.Squatting urinal of 600mm x 350mm(Parryware make) |
| 79 | Supplying all materials ,labour ,T&P and fixing Wash basin with hole for pillar taps with cast iron or MS brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. fixing pedestral for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin , fixing 12mm dia CP brass waste etc.all complete as per specification and direction of Engineer-in-charge.550mmx400mm size wash hand basin(Parryware white) with Pedestal |
| 80 | Supplying all materials ,labour ,T&P and fixing Mirror of superior glass mounted on 6mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs with chromium plated brass screws and washers etc.all complete as per specification and direction of Engineer-in-charge600mmx450mm size B.E mirror ( fixed type ) |
| 81 | Supplying all materials,labour,T&P and fixing standard sized Glass-shelf with C.P brass bracket and guard rail complete fixed to wooden pluges with screw etc.all complete as per specification and direction of Engineer-in-charge.600mmx125mm size glass shelf with C.P guard rail |
| 82 | Supplying all materials ,labour ,T&P and fixing standard sized CP brass towel rail complete with CP brass brackets fixed to wooden plugs with chromium plated brass screws etc.all complete as per specification and direction of Engineer-in-charge25mmx600mm long CP Towel rail |
| 83 | C P Towel Ring |
| 84 | Supplying all materials ,labour ,T&P and fixing CP Soap Holder complete with CP brass brackets fixed to wooden plugs with chromium plated brass screws etc.all complete as per specification and direction of Engineer-in-chargeCP soap holder |
| 85 | Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -charge |
| 86 | Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 87 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 88 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 89 | Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 30cmx30cm special printed series to be pre-approved by the Engineer-in-charge ). |
| 90 | Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 30cmx20cm / 20cmx20cm special plain / printed series to be pre-approved by the Engineer-in-charge ) |
| 91 | Factory made single leaf solid WPC (alternately called Wood Polymer Composite) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass chopped strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 1.50mm Expanded polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material.Wooden rainforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts,aldrops,handles etc shall be provided. A sturctural adhesive compatible with(EPS) foam shall be used for bending the core material, the sal wood rainforcements and the skins.The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centres standards and specifications and the door shutters tested in conformation to IS:4020-1998. The finish of door shutter will be plain colour using white/Ivory/Beige/Light grey/Mahogany /Teak wood or any other colour using high quality pigments.Three heavy whight mild steel butt hinges typep-I(ISI marked)size 100m are to be fitted on one side of shutter and complete in all respect as per specification and direction of the Engineer-in-charge. |
| 92 | Factory made WPC(alternately called Wood Polymer Composite) door frame of size 75mmx100mm fabricated using E-glass Chopped strand Mat (CSM) U.V stablised Inopthalic Gelcoat and impregnated with Inopthalic resin.The thickness of the GRP skins shall not be less than 2.00mm. The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould.The segments are plugged in and are joined together by means of screw.The GRP frame shall be provided with wooden reinforcement on six locations for high screw holding capacity for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement,six numbers of 260mmx25mmx5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design centre's standards and specifications. The finish of door frame will be plain colour white/Ivory/ Beige/ Light gray/Golden brown/ Mahogany/ Teak wood/Sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer-in-charge. |
| 93 | E.I. WorkRecessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V Modular type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex / KEI / Anchor / Havells /Polycab) (Make of Switch, Socket & Regulator/Anchor(Roma Classic)/Havells(Crabtree)/Legrand) ( wire colour code to be followed i.e . Neutral-Black, Earthing-Green Phase-R-Y-B )Group-A -L.P- F.P- C.B.P- |
| 94 | Group-B L.P- F.P- C.B.P- |
| 95 | Group-C L.P- F.P- C.B.P- |
| 96 | Supply and fixing of 5 Amp plug with switch on existing board (Modular type/cover including connection etc. as required ) |
| 97 | SF of 3 pin 15 Amp plug point on M.S. Board Modular type |
| 98 | Circuit Submain wiring in PVC Conduit including inverter wiring2 X 1.5 sq.mm +1 X 1.5 sq.mm in 20 mm dia |
| 99 | 2 X 2.5 sq.mm +1 X 1.5 sq.mm -do- |
| 100 | 2 X 4 sq.mm +1 X 1.5 sq.mm -do- |
| 101 | 4 X 6 sq.mm +2 X 2.5 sq.mm -do- |
| 102 | S/F of Bakelite angle holder/batten holder of ISI marked including connection etc as required . |
| 103 | S/F of 10 watt LED bulb (Havells/Phillips/CG) |
| 104 | S/F of A.C. Ceiling fan of size 48\\" without regulator . (Make- Usha(swift/racer)/Havells/Crompton-Breeza) (Except Brown colour) |
| 105 | Supply and fixing of Electronic Step Type fan regulator (Make-Cona/ Anchor/ Usha/Bajaj) |
| 106 | Installlation, Testing and commissioning of ceiling fan including wiring the down rod of standard length(up to 30 cm) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor etc. as required. |
| 107 | S/F of 12 Watt square shaped LED ceiling light (Havells/Phillips/CG) |
| 108 | S/F of 18 Watt round shaped Potico light (Havells/Phillips/CG) |
| 109 | S/F of 48 watt LED street light (Havells/Phillips/CG) |
| 110 | S/F of G.I. Bend pipe for street light |
| 111 | Supply and fixing of 12 way double door single pole MCB DB with sheet steel enclosure,distribution board,on suface/recess,complete with tinned copper bus bar,neutral bus bar,earth bar,din bar,detachable gland plate,interconnection,phosphate and powder painted including earthing etc.as required. (L&T/Havells/Anchor) |
| 112 | Supply and fixing of 4 way (4+12) double door TPN DB with sheet steel enclosure,distribution board,on suface/recess,complete with tinned copper bus bar,neutral bus bar,earth bar,din bar,detachable gland plate,interconnection,phosphate and powder painted including earthing etc.as required. (L&T/Havells/Anchor) |
| 113 | Supply and fixing of 6Amp single pole MCB(Make-Havells(Craptree)/L&T/Legrand) |
| 114 | S/F of 32 Amp DP MCB (Make-Havells(Craptree)/L&T/Legrand) |
| 115 | S/F of 63 Amp four pole MCB (L&T/Havells) |
| 116 | S/F of computer board consisting 3 nos 5amp switch and socket |
| 117 | S/F of Modular starter for AC machine(Crabtree/Schneider/Siemens/Legrand) |
| 118 | Battery Rack for single battery |
| 119 | S/F of Tubular battery of capacity 200AH((Exide /Luminous) |
| 120 | S/F of sine wave Inverter of capacity 1500 VA (Luminous/Microtech) |
| 121 | S/F of 100 Amp 4 pole MCCB, 36 KA in sheet steel enclosure(L&T/Havells) |
| 122 | S/F of 100 Amp 6 way TPN copper bus-bar (Havells/L&T) |
| 123 | S/F of 25 sq.mm 3 1/2 core Aluminium Armoured cable(Havells/Polycab) |
| 124 | Laying and fixing of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size 25 sq.mm direct in ground |
| 125 | Supply and fixing of Earthing with G.I earth pipe 3mtr. Long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required. |
| 126 | Supply of Extra running earth with 8 SWG ( 4mm ) dia copper wire Please Enable Macros to View BoQ information |
