|
| 1 | Maintenance |
| 2 | 2.31:Clearing jungle including uprooting of rank vegitation grass brush wood,trees and sapling of girth upto 30cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50m outside the periphery of the area cleared. |
| 3 | 13.88 Removing white or colour wash by scrapping and sand papering and preparingthe surface smooth including necessary repairs to scratches etc. complete |
| 4 | 50.10.1: Steel work in built up G I tubular(round,square or rectangular hollow tubes etc.) trussess etc. including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer,including welding and bolted with special shaped washers etc. complete. |
| 5 | 50.10.2:Steel work for purlin/single section with GI pipe including cutting ,hoisting,fixing the position and applying a priming coat of approved steel primer,including welding and bolted with special shaped washers etc. complete. |
| 6 | 50.13.1: 9 mm cement plastering of mix 1:3(1cement,3 sand) including all cost of materials labour charges etc. complete. |
| 7 | 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI 12701marked,withcover and suitable locking arrangements and marking necessary holes for inlet,outlet and overflow pipe but without fittings and the base support for tank |
| 8 | 13.98.1 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work |
| 9 | 13.111.1 Finishing walls with acrylic smooth exterior paint with silicon additives of required shade :Old work(Two or more coat applied @ 1.67ltr/10sqm)on existing cement paint surface. |
| 10 | 13.99.1:Painting with synthetic enemel paint of approved brand and manufacture of required colour to give an even shade : one or moore coats on old work. |
| 11 | 13.61.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 12 | 12.50 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 13 | 12.51.1 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600 mm) |
| 14 | 10.6.2:Supplying and fixing rolling shutter of approved make,made of required size MS laths,interlocked together through their entire length and joined together at the end by end locks,including all cost of materials and labour charges etc. as per specification. |
| 15 | 10.25.2:Item shifted to sub head 14 as item 14.73 item shifted to head 14 as item 14.74 steel work welded in built up sections/ framed work including cutting hoisting fixing in position and applying a priming coat of appd. Steel primer etc. |
| 16 | 10.7: Providing and fixing ball bearing for rolling shutters |
| 17 | 50.6.2.2:Solid block masonry using pre cast solid blocks(factory made) of size 30*20*15cm or nearest available size conforming to IS 2185 part 1 of 1979 foe SS up to floor 2 level with thickness 15cm in CM 1:6. |
| 18 | 13.1.1: 12mm cement plaster of mix 1:4(1cement 4 sand) |
| 19 | 50.9.2.2: Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 35mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f Engineer in- charge. using Anjili/ Jack wood |
| 20 | OD: Providing and fixing stainless steel mosquito net with frame for windows good quality including all cost and conveyance etc. complete. |
| 21 | 17.10.2.2:Providing and fixing stainless steel A ISI 304 (18/8) kitchen sink as per IS 13983 with CI brackets and stainless steel plug 40mm,including painting of fittings and brackets cutting and making good the walls wherever required: Kitchen sink without drain board 610*460mm bowl depth 200mm. |
| 22 | OD Supplying and fixing window curtain size 150*140cm blinds type including all cost etc complete. |
| 23 | 50.18.7.3.2: Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. internal work,iexposed one wall etc. 25 mm pipe 10 Kgf/cm2 |
| 24 | 4.1.4:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering .-All work upto plinth level 1:2:4(1 cement,3 sand, 4 20mm nominal size) |
| 25 | 11.38:Providing and laying CEramic glazed floor tilesof size 30*30cm (thickness to be specified by the manufacturer) of 1st quality and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. |
| 26 | 50.18. 9.17.1 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. exposed on wall,including cutting chased and making good the wall etc. 63 mm pipe 6 Kgf/cm2 Please Enable Macros to View BoQ information |
