|
| 1 | Taking down cement plaster/terrazo finish on brick or stone wall etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed |
| 2 | M&L for 10mm thick Ready mix Plaster in cement mortar 1: 6 on fair faces of brick work or concrete surfaces, finished even & smooth without using extra cement |
| 3 | M&L for 15mm thick Ready mix Plaster in cement mortar 1: 4 on fair faces of brick work or concrete surfaces, finished fair and even without using extra cement using integral liquid water proofing compound and complete.Note : WPC shall be measured and paid seperately. |
| 4 | M&L for 5 mm thick Ready mix Plaster in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement |
| 5 | M&L for Preparing new plastered or unplastered surfaces of ceiling and applying two coats of acrylic emulsion paint over & including 2mm wall putty , white or tinted complete and as directed by Enginner in charge. |
| 6 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over & including 2mm thick wall care putty on new surfaces including preparation and complete specified and as directed by Engineer in charge. |
| 7 | M&L for Preparing new plastered or unplastered surfaces of walls and applying two coats of acrylic emulsion paint over including 2 mm thick putty complete and as directed by Enginner in charge. |
| 8 | Supply only liquid water proofing compound ISI marked @ 200ml per 50Kg of cement content. |
| 9 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified & directed. |
| 10 | M&L for 75mm thick Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection, , finished even and smooth using extra cement , laid in panels including making joints 12mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete. |
| 11 | Dismantling of floor hearth or existing terrazo dado /flooring or tilles in bath .WC and kitchen etc as directed by Engineer in charge. |
| 12 | Roughening Brushing neat cement slurry with 3.0kg of cement per sq. metre surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. and complete all as specified |
| 13 | M&L Non skid Ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors on using chemical adhesives and pointed in white or coloured cement to match complete |
| 14 | M & L for non skid ceramic colour (light shade) joint free tiles with matt finish size 400x400x7mm thick ( square/ rectangular ) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 including necessary cutting as per site requirement complete all as specified and directed by Engineer - in - Charge. |
| 15 | M&L Non skid Ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in skirting / dado on 10mm thick screeding in CM 1:4. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete. |
| 16 | M & L for glazed ceramic tiles (coloured) 450x300x7mm thick on vertical surfaces such as skirting, dado and risers to steps set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including 10 mm thick rendering in Cement Mortars 1:4 on fair faces of brick work or concrete surfaces complete all as specified and directed. |
| 17 | Dismantling of stone slabs or tiles of any thickness in steps, jambs, pillars, window- cills, cooking platforms and like laid, bedded and pointed in any mortar and complete all as specified. |
| 18 | M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified |
| 19 | Supply & fixed in repair water closet vitreous china squatting pan 'Orissa pattern' size Each 580 mm x 440 mm white, with integral foot rests & incl CI P or S trap and provision of lime concrete complete all as specified & directed. |
| 20 | S & F in repair PVC valve less, symphonic action type, flushing cistern (10 liters capacity) low level, white, with inlet, ball valve, float and handle including brackets complete all as specified & directed. |
| 21 | S&F Vitreous china wash basin, white, flat back, size 550 x 400mm, including brackets and cutting for and pinning in ends of brackets, fixed in repairs complete. |
| 22 | S&F in repair Pillar tap, cast copper alloy, chromium plated,fancy type screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore complete. |
| 23 | S & F in repair brass chromium plated bib cock long Nose body Fancy type with capstan screwed down for iron pipe 15 mm bore complete all as specified & directed. |
| 24 | S & F in repair angle valve cock chromium plated fancy type half/full turn for iron pipe 15 mm bore screwed down high pressure, with capstan head, screwed both ends for iron pipe or for union complete all as specified & directed. |
| 25 | S& F single lever High concealed diverter flow consisting of exposed part kit with operating lever , wall flange & button and concealed body ,cartdge sleeve and also including bath spout with flange chromium plated ,screwed down, high pressure all as specified make Cera:(exposed part F1018721, concealed part F4030101, bath Spout F1020661), Jaquar or equivalent in same Pattern |
| 26 | S & F repair PVC connection 15 mm size brass nuts of length 450 mm complete all as specified & directed. |
| 27 | S&F stainless steel sink with drainage board, AISI 304 quality grade, 1.00 mm thick, glossy finish, for kitchen with plugs washers and CP waste coupling of 32mm dia and including cantilever cast iron brackets, connecting union, etc, overall size 915mm x460/928mmx458mm with bowl size 410x 355x185mm/430x355x200 including bottle trap 32mm with 125mm & 175mm long with wall connection pipe & wall flange and making good disturbed portion in CM 1:3 or PCC 1:2:4 as directed.Make : Sink :- Nirali (Elegance) or Diamond (REK 3618) or NeelkanthMake : Bottle Trap :- Hindware (F850015) or equivalent as approved by AO |
| 28 | Supply and fixing Plate Rack / Dish Rack of overall size 750mmx600mmx250mm (Approx. size), glossy finish made out of Food Grade Stainless Steel 1mm thick sheet/strip including necessary arrangements for plates and utensils to keep (Holds up to many plates or bowls To accommodate several place settings, Multipurpose), stylish modern streamline design, rust resistant, easy to assemble and clean including fitting accessories fixed in position as directed with SS screws/fasteners etc complete all as directed by Engineer-in-charge. |
| 29 | Taking up or down steel tubing and connections 15 mm bore complete all as specified and directed by engineer in charge. |
| 30 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store as directed complete. |
| 31 | Supplying and laying of CPVC pipes of 20 mm dia SDR 11 & Plain CPVC SDR 11 fittings in trenches, wall((100mm away from wall using sutaible clamps) complete all as specified. |
| 32 | Supplying and laying of CPVC pipes of 25 mm dia SDR 11 & Plain CPVC SDR 11 fittings in trenches, walls(100mm away from wall using sutaible clamps) complete all as specified. |
| 33 | S&F male/female brass threaded adaptor(FTA/FBTA) complete all as specified |
| 34 | S&F in repair triple layer Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity, hoisted and fixed in position including connecting up pipes complete. |
| 35 | S&F in repairs Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore (minimum weight 210 gms) complete. |
| 36 | Taking down eaves gutters and rain water PVC pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-neck etc (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 37 | S&F 110 mm bore uPVC pipes grade 'B' , single socketed in any length with rubber ring joints , fixed along walls or laid in trenches with and including suitable size clamps/brackets (interval of 1m and pipe keeping 100mm away from wall) of suitable size fixed with fasteners/nut bolts, joints fixed with pipe joint lubricant including UPVC bend/tees of any radious for 100mm bore with access door, 100mm Junction( double T/socket equal or unequal, UPVC 100mm bore vent cowls, reducer 110 mm to 50mm complete complete all as specified and as directed by Engr-in-Charge.Note : Bracket, clamp, nut bolt, fastner, slotted channel etc shall be made of deep drawn low carbon steel material with jotbdip zinc alumnium flake coated and fixed all as shown on BTD drawing cost for same shall deemed to be included in the quoted unit rate and nothing extra shall be admissible on this account.Note : uPVC pipe and fitting / Fixture - (i) The testing for leakage of pipe shall be done before connecting the pipes (ii) All pipes shall be minimum 4\\" away from walls fixed with GI brackkets (iii) The gully trap shall be minimum 90 cm away from wall (iv) Seperate pipes for for each floor should be provided (v) Sewage and drain system shall bbe seperate.Make: Astral / Prince / Finolex/Prayag |
| 38 | S&F 75 mm bore uPVC pipes grade 'B' , single socketed in any length with rubber ring joints , fixed along walls with and including suitable size clamps/brackets (interval of 1m and pipe keeping 100mm away from wall) of suitable size fixed with fasteners/nut bolts, joints fixed with pipe joint lubricant including UPVC bend/tees of any radious for 75mm bore with access door, 75mm bore Junction( double T/socket) equal or unequal, reducer 75 mm to 50mm and 75mm bore vent cowl complete complete all as specified and as directed by Engr-in-Charge.Note : Bracket, clamp, nut bolt, fastner, slotted channel etc shall be made of deep drawn low carbon steel material with jotbdip zinc alumnium flake coated and fixed all as shown on BTD drawing cost for same shall deemed to be included in the quoted unit rate and nothing extra shall be admissible on this account.Note : uPVC pipe and fitting / Fixture - (i) The testing for leakage of pipe shall be done before connecting the pipes (ii) All pipes shall be minimum 4\\" away from walls fixed with GI brackkets (iii) The gully trap shall be minimum 90 cm away from wall (iv) Seperate pipes for for each floor should be provided (v) Sewage and drain system shall bbe seperate.Make: Astral / Prince / Finolex/Prayag |
| 39 | M&L UPVC multifloor trap 75 mm dia and 600 mm long with grating including jointing with solvent cement in repair .Make : Astral / Prince / Finolex |
| 40 | S & F in repair gun metal glob or gate valve with iron wheel head , crewed for iron pipe of 20 mm dia fixed in repair complete all as specified & directed. |
| 41 | S&F in repairs Bevelled edge mirror of 5 to 6 mm thick selected quality glass, 600 x 450 mm size, mounted on 6 mm thick PVC Sheet fixed with Chromium plated brass screws and cup washers, complete. |
| 42 | S&F in repairs Glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete. |
| 43 | S&F brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flangess complete. |
| 44 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete. |
| 45 | S&F 1.25 mm thick Pressed steel frames of size 105mm x 60mm for single doors including necessary fixing lugs, hinges, lock strike plate, etc complete all as per IS provns. |
| 46 | S&F 1.25 mm thick Pressed steel frames of size 125mm x 60mm for double doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as per IS provns. |
| 47 | M & L for PCC 1:3:6 type C1 using 20 mm graded stone aggregate for embedding the hold fast, copping etc complete all as specified & directed. |
| 48 | S&F 30mm thick Flush shutters, solid coreconstruction, with blockboard core and plywood face panels, commercial type on both sides supplied and fixed to chawkets complete(a) Stainless Steel (304 Grade) Finished Butt Hinges 100mm - 4 nos. per leaf (Table 6 of BIS 12817-2020) BIS marked.(b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf as per table 1, dia of bolt 12mm as per BIS 15833. (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos. per leaf(d) Stainless Steel (304 Grade) Finished Sliding Bolt 300 mm - 1 no. per leaf, 16mm dia as per BIS marked clause 3(iii) of BIS 15834-2020.(e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos. per leaf |
| 49 | S&F Second class hardwood glazed and skeleton door shutters 30 mm thick, open rebated and prepared to receive glass, gauze, etc (with rebated sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete.(a) Stainless Steel (304 Grade) Finished Butt Hinges 100mm - 4 nos. per leaf (Table 6 of BIS 12817-2020) BIS marked.(b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf as per table 1, dia of bolt 12mm as per BIS 15833. (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos. per leaf(d) Stainless Steel (304 Grade) Finished Sliding Bolt 300 mm - 1 no. per leaf, 16mm dia as per BIS marked clause 3(iii) of BIS 15834-2020.(e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos. per leaf(f) Stainless Steel (304 Grade) wire cloth fixing as per manufacture |
| 50 | Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Clerestory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: (i) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made(ii) Cost for M.S. hold fast/ lugs or SS dash fasteners shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. |
| 51 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge including supply and fixing following items :(a) Stainless Steel (304 Grade) Finished Butt Hinges 100mm - 4 nos. per leaf (Table 6 of BIS 12817-2020) BIS marked.(b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf as per table 1, dia of bolt 12mm as per BIS 15833. (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos. per leaf(d) Stainless Steel (304 Grade) Finished Sliding Bolt 300 mm - 1 no. per leaf, 16mm dia as per BIS marked clause 3(iii) of BIS 15834-2020.(e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos. per leaf |
| 52 | S&F 300 mm, ordinary rat tail rod pattern springs of Stainless steel including roller and roller plate complete. |
| 53 | M & L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified & directed. |
| 54 | M&L for preparation of old interior surface of walls including complete removal of existing treatment by mechanical equipment like electric sander and applying two coats of acrylic emulsion paintover & including 2 mm thick putty complete and as directed by Enginner in charge. |
| 55 | M&L for Preparing old ceiling including complete removal of existing treatment by mechanical equipment like electric sander and and applying two coats of acrylic emulsion paint over & incuding 2mm wall putty , white or tinted complete and as directed by Enginner in charge. |
| 56 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over & including 2mm thick wall putty on old surfaces including complete removal of of existing treatment complete specified and as directed by Enginner in charge. |
| 57 | Roof Treatment : Removal of existing PCC/Brick Bat Coba/Mud phuska/APP membrane from the roof, stacking the reusable material and disposal of unserviceable rubbish outside the campus as direction by Engineer-in-Charge but outside in 3 km. |
| 58 | M&L Providing, cement concrete in roof Type B1 1:2:4 using 20 mm graded aggregates as in PCC Bed and complete all as specified. |
| 59 | M&L for 10 mm thick screed bed in cement mortar 1: 4 on concrete surfaces, finished Fair & even including mixing water proofing compound as per manufacturer's instns( WPC to be measured separately as supply only) |
| 60 | Cleaning of surface of loose dust and dirt and cement slurry etc. by means of wire brush, dust removing brush and scraper etc. Pot holes/cracks shall be repaired with cement admixed with polymer as per manufacturer instructions. |
| 61 | The surface shall be treated with PU Elastoseal primer with Epoxy primer to seal the pores and enhance adhesion. Supplying and applying single component waterproofing liquid membrane based on pure elastomeric polyurethane resin cold applied or spray/brush applied membrane with elongation of 650% ± 50 and tensile strength not less than 2 MPa. Crack bridging ability not less than 2 mm. No leakage up to 5 bars water pressure. Shore hardness > 50. Minimum thickness 1.5 mm overall in two layers. |
| 62 | Providing & laying of protective Geotextile fabric 150 GSM over the entire membrane with proper overlaps of 75 mm before laying SRI roof tiles. |
| 63 | Providing and laying SRI roof tiles (Size 300 x 300 x 9–10 mm) with 20 mm thick cement plaster in CM (1:4) mixed with liquid waterproofing compound as per manufacturer instructions, confirming required slope. |
| 64 | Demolition of brick work built in cement mortar including all quions arches pillars etc |
| 65 | M&l for brick work with sub class B bricks straight or curved on plan exc 6m mean radius brick walls built in CM 1:6. |
| 66 | Demolition of stone tiles/kota / Marble in floors of any description or thickness laid, bedded and pointed in any mortar. |
| 67 | Material and labour for anti skid full body vitrified step tiles 10mm thick as in tread raiser, skirting (single piece length wise upto 1200mm) laid over and including screed bed 10mm thick in CM 1:3 complete all as specified and as directed by Engineer-in-Charge. |
| 68 | MS Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hangingdoor fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete etc, confirming to Fe 290 Gde E-165 complete all as specified and as directed by Engineer-in-Charge. |
| 69 | S& F chromium plated soap dish Holder with round flange, fixed on wall with chromium plated brass screws and PVC plug complete all as specified and as directed by Engineer in charge. |
| 70 | S&F Corner glass shelf of size 300mmx200x150mm fancy type, toughned glass, with CP bracket and guard railing, fixed along wall with CP brass screws and PVC plug complete all as specified and as directed. |
| 71 | M&L for 25mm dia stainless steel chromium plated curtain rod incl bracket & knobs fixed in position . |
| 72 | M&l Anti termite treatment of soil under existing floor using chemical emulsion one litre per hole, 300 mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors complete all as specified and directed. |
| 73 | M&l Anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron all as specified. |
| 74 | M&L for demolition of sunken filling concrete, removal of loose concrete and cleaning the surface and after proper cleaning filling the cracks with polymer modified mortar using Dr fixit pidicrete URP and providing 50mmx50mm angle fillets on the vertical upstands, parapet wall junction corners, service units and properly dressed by preparing polymer modified mortar with DR Fixit pidicrete URP in the ratio of 1:3 by adding polymer 10% by weight of the cement, add the water little little unit the required consistency is achieved and thereafter providing and applying two coats of acrylic polymer modified cementitious coating Dr Fixit pidifin 2K of M/s Pidilite Industrieshaving elongation at break 50% 5 bar resistance to positive water pressure, Adhesive strength ASTM D 7234-1 N/mm sq, water vapour transmission as per ASTM E96 of 030 perms and crack bridging ability as per EN 1062-7 upto 1 mm. Apply two coats of Dr Fixit pidifin 2K slurry “ coverage of 0.55-0.58 Sqm/kg of mix slurry. Provide and lay 45 gsm glass fibre mesh over the angle fillet when the first coat is still wet. Allow the first coat to dry for 6-8 hours, then apply the second coat at a direction perpendicular to first coat. Allow the coating to air cure for 5 days before conducting water ponding test for 24 hrs etc or other equivalent product as approved by GE in sunken area complete all as per the manfactures instruction, including removing rubbish material from building and thrown in low lying empty area at any distance out side MD land complete all as specified and as directed by Engineer-in-Charge |
| 75 | M&L for Preparing new or previously untreated surfaces of wood and wood based materials of any decription exceeding 10 cm in width or girth when un-connected with other painting or when painted in different tint and applying two coats of synthetic enamel paint over and including a coat of pink primer complete. |
| 76 | M&L rendering 10 mm thick in cement plaster (1:3) using coarse sand even and smooth with steel trowel on sunken surfaces using integral water proofing compound.( WPC shall be measured and paid separately) |
| 77 | S & F Continuous (piano) hinges, stainless steel, bright finish or electrogalvanised with 40mm width of flaps (when open) and complete. |
| 78 | S&F 18 mm thick single side prelaminated wood grain solid PVC sheet suitable fxed in shelves, cupboards, partitions and shelves of built-up cupboards, for kitchen with 6 mm PVC beading support , washer, plug, Handles, Knob , magnets, locks etc complete all as specified and as directed by Engineer-in-Charge. |
| 79 | S&F 100mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws |
| 80 | S&F 3mm thick Sheet glass , ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete. |
| 81 | S&F 4mm thick Figured glass, pin head type and glazing with beads (either supplied with shutters or to be measured separately as supply only) in squares not exceeding 0.5 Sqm in each pane complete. |
| 82 | Demolition of cement conc. Reinforced as in roof slab , beams chhajas and similar suspended work reinforced cut required to facilitate demolition complete all as specified and directed |
| 83 | Form work to chullah hoods, chajjas, troughs and similar items including edges to rough finished surface and complete. |
| 84 | M&L for Mild steel TMT bars8- 10mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete. |
| 85 | Reinforcement cement concrete design mix M-20 Nominal mix for kitchen platform, chajja and like using 20 mm graded stone aggregates and complete all as specified. |
| 86 | Taking down carefully copper/aluminium point wiring ( light, fan , socket or power) including fittings such as switches, bell push, call bell, Ceiling roses, lamp holders, regulators, sockets, light fittings any type etc and making good disturbed surfaces of wall, floors etc complete all as directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
| 87 | Taking down carefully copper/aluminium point wiring ( light, fan , socket or power) including fittings such as switches, bell push, call bell, Ceiling roses, lamp holders, regulators, sockets, light fittings any type etc and making good disturbed surfaces of wall, floors etc complete all as directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
