| 1 | Access Control System with 2.8\\" display (without Face Recognition Readers) Supplying, Installation, Testing and Commissioning of, Access control system comprising of fingerprint, card, and password authentication and having following specifications: •Authentication Methods: Fingerprint, Card &Password with Capacitive Touch screen.• Fingerprint Detection: Fake Fingerprint Detection Technology.•Display: 2.8\\" TFT touch Screen display.•Capacity: 10,000 Fingerprint storage (1:N).•Logs: 200,000 transaction logs.•Power: 12V DC. (UL listed)•Communication Protocols: TCP/IP, WiFi, USB, Wiegand Out / IN, RS 485.•Additional Features: User-wise authentication modes, Built-in Lock Control.•Certifications: CE, FCC, RoHS, BIS.•Environmental: IP 54 Ingress Protection.•Mounting: Suitable for metal surfaces/frames, wooden frames, walls, and flap barriers. |
| 2 | Supplying, installation, Testing and commissioning of following capacity 8 port Layer 2 indoor Network Switch having features and specifications etc. as mentioned here under: Minimum 8 X RJ-45 Gigabit Ethernet Ports and additional 2 X 1G SFP Ports with non-blocking architecture by having Switching capacity of minimum 20Gbps and packet forwarding rate of 14Mpps or higher, 8K MAC table. Internal dual AC Power supply with operating temperature of -5 0C to +50 0C. Jumbo frame: 10KB or higher, IGMP Snooping, IGMP snooping querier and support for IGMP Snooping Fast Leave, Should create 250 or more MLD groups, MLD Snooping, Per VLAN MLD Snooping C MLDSnooping Fast Leave, STP, RSTP, MSTP, Loopback detection, Multicast filtering, VLAN Tagging, ǪOS: 8 Ǫue per port, WRR, IPv4/IPv6 Interface : minimum 100 IPv4 static route entries and minimum 50 IPv6 static route entries, 700 Acess Control entries, SSH CSSL for IPv4 and IPv6, 802.1x, ARP Spoofing, DHCP Snooping and server screening, IP+MAC+Port Binding, Per Port Bandwidth Control, 802.1X Authentication (Supports local/RADIUS database, Port-based Access Control and EAP, OTP, TLS, TTLS, PEAP Support) Cable Diagnostic feature, LLDP, LLDP-MED, SNTP/NTP, RMON, SNMP v1,v2c, v3 and SNMP Traps. Certifications: UL, CE, FCC, RoHS, MTCTE, OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India etc. complete as required.a) 8 port Layer 2 Non-PoE Network Switch |
| 3 | Supplying, drawing, Installation, Testing and commissioning of CAT6 UTP LSZH 23AWG Twisted Pair Cable in existing conduit/ on surface, Category 6 Unshielded Twisted Pair, 4 pair should be complied as per UL/ETL verification program for compliance with ANSI/TIA-568.2-D standard. Outer diameter should be in the range of 6.1mm nominal with Operating Temperature Range : -5° to +60°C, Bending Radius : < 4 X Cable Diameter at –5°C ± 1°C and Pulling Force : 11.5Kg etc. complete as required. a) 1 Run of cable |
