|
| 1 | Earthwork in bulk excavation in dense (or) hard soil (exceeding 30cm in depth, 1.5m in width as well as 10 Sqm. on plan) including disposal of excavated soil lead upto 50m, disposed soil to be levelled and neatly dressed etc., complete complying with AISS and as directed by the departmental officers. |
| 2 | Providing and laying Plain Cement Concrete 1:4:8 (One part of cement, 4 parts of M. Sand (Crushed Stone Sand) & 8 Parts of 40 mm nominal size metal ) for foundation using 40 mm nominal size graded metal including mixing, laying, levelling, consolidation, finishing and curing etc., complete complying with AISS and as directed by the departmental officers. |
| 3 | Random Rubble masonry with hard broken stones in foundation and plinth with Cement mortar 1:5 (M. Sand (Crushed Stone Sand)) (one cement, five M. Sand (Crushed Stone Sand)) including levelling at plinth level, curing etc., complete complying with AISS and as directed by the departmental officers. |
| 4 | Providing and laying Reinforced Cement Concrete 1:1.5:3 (One part of cement, One and a half parts of M. Sand (Crushed Stone Sand) & Three Parts of graded stone aggregate (i.e.) 2 parts of 20mm nominal size graded metal & 1 part of 10mm nominal size graded metal) using 20 mm nominal size graded metal including mixing, laying, levelling, consolidation, finishing and curing etc., and excluding the cost of form work and reinforcement grills for all RCC works in all floors upto full height of the building etc., complete complying with AISS and as directed by the departmental officers. |
| 5 | Providing Form work including centring, shuttering, (shuttering Planks shall not less than 38 mm thick) so as to give a rough finish shuttering and propping etc., in all floors upto full height of the building and removal of the same for in situ RCC work such as beam, slabs, lintels, sunshade etc., complete complying with AISS and as directed by the departmental officers. |
| 6 | Fabricating and placing in position of M.S / Tor steel grills for R.C.C works in all floors including cost of Steel, cutting, bending, binding with 16 Gauge GI Binding wire and placing in position etc., complete complying with AISS and as directed by the departmental officers. |
| 7 | Brick work in Cement Mortar 1:5 (M. Sand (Crushed Stone Sand)) ( One cement, five M. Sand (Crushed Stone Sand)) using chamber burnt bricks for walls in Ground Floor of the building including cost of all materials, labour, curing etc., complete complying with AISS and as directed by the departmental officers. |
| 8 | Plastering the Brick work 15 mm thick in Cement Mortar 1:5 (Plastering Sand (P-Sand)) (One cement, five Plastering Sand (P-Sand)) for all faces of walls (even and uneven) in all floors upto full height of the building including necessary scaffolding, racking of masonry joints, cleaning, curing etc., complete complying with AISS and as directed by the departmental officers. |
| 9 | Providing and laying approved colour and quality of Ceramic floor tiles 30 x 30 cm in Cement Mortar 1:4 (M. Sand (Crushed Stone Sand)), 12 mm thick. The rate inclusive of cost of tiles, all materials, labour, white cement, conveyance etc., complete complying with AISS and as directed by the departmental officers. |
| 10 | Providing and fixing in Cement Mortar 1:3 (M. Sand (Crushed Stone Sand)), 6 mm thick of 30 x 30 cm wall tiles over the existing wall up to 2.50 m height by chipping the wall surfaces wherever required and fixing with approved colour and quality of tilesincluding all materials, labour, equipments etc., complete complying with AISS and as directed by the departmental officers. |
| 11 | Supplying, fabrication and fixing of GI Pipe Gate of Size 4m x 1.80m (Two leaf) using 65mm dia. GI Pipe \\"B\\" Class outer alround, Vertical 40mm dia. GI Pipe with 5 inch centre to centre spacing and 5mm tk. MS Plate of size 0.90m x 0.90m both sides - 4 Nos. for fixing Port Emblem with Vinyl Sticker. The cost including all materials, labour charges, fabrication charges, Clamp & Locking arrangements including one coat primer and two coats of Synthetic enamel paint, conveyance and fixing charges etc., complete and as directed by the departmental officer. |
| 12 | Supplying and fixing Solid Panel PVC door with frame - Supplying and fixing Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter etc., complete and as directed by the departmental officers. |
| 13 | Supplying and fixing 25mm dia. PVC pipe 10 kg. per cm2 working pressure in wall, ceiling and floor with necessary clamps and screws, making holes in the wall wherever necessary by drilling holes in the roofs and walls, packed the holes with necessary brick works or concrete wherever necessary plastering the surface smooth with required scaffolding including cost of pipe and special such as elbows, tee, union joints, reducer etc., cutting threading etc., complete complying with AISS and as directed by the departmental officers. |
| 14 | Supplying and fixing 32mm dia. PVC pipe 10 kg. per cm2 working pressure in wall, ceiling and floor with necessary clamps and screws, making holes in the wall wherever necessary by drilling holes in the roofs and walls, packed the holes with necessary brick works or concrete wherever necessary plastering the surface smooth with required scaffolding including cost of pipe and special such as elbows, tee, union joints, reducer etc., cutting threading etc., complete complying with AISS and as directed by the departmental officers. |
| 15 | Supplying and laying in trenches 75 mm dia. PVC inflow pipe line 6 Kg./CM2 with necessary pipe specials such as elbow, tee, union joint etc., and the joints being tightened including threading cost of pipe, specials etc., complete complying with AISS and as directed by the departmental officers. |
| 16 | Supplying and laying in trenches 25mm dia. Medium 'B' class G.I. inflow pipe line with necessary pipe specials such as elbow, tee, union joint etc., including wrapping with tar tipped gunnies to the extire outer surface of the pipe line and the joints being rightened including threading cost of pipe, specials etc., complete complying with AISS and as directed by the departmental officers. |
| 17 | Supplying and laying in trenches 32mm dia. Medium 'B' class G.I. inflow pipe line with necessary pipe specials such as elbow, tee, union joint etc., including wrapping with tar tipped gunnies to the extire outer surface of the pipe line and the joints being rightened including threading cost of pipe, specials etc., complete complying with AISS and as directed by the departmental officers. |
| 18 | Supplying and fixing in position 15mm dia. SS Long lever water tap of approved quality including all materials, labour, fixing charges, etc., complete and as directed by the departmental officers. |
| 19 | Supplying and fixing in position of best Indian make heavy duty Gun Metal Gate Valve at 25mm dia. of approved quality including all materials, labour etc., complete complying with AISS and as directed by the departmental officers. |
| 20 | Supplying and fixing in position of best Indian make heavy duty Gun Metal Gate Valve at 32mm dia. of approved quality including all materials, labour etc., complete complying with AISS and as directed by the departmental officers. |
| 21 | Supplying and fixing in position of best Indian make chinnaware water closet of European type (White) of double trap syphonic with fibre cover including all fittings and necessary lead pipe jointing the trap with C.I. pipe, the pipe connection being embedded below floor level in brick jelly concrete in lime mortar 1:2 including cost of fittings of low level flushing cistern with syphonic fitting tank of 12.5 litre capacity with inlet and over flow at bottom and connecting it with water supply pipe line and painting the pipe line with two coats of paint approved quality including all materials, labour etc., complete complying with AISS and as directed by the departmental officers. |
| 22 | Supplying and fixing of 1000 litres capacity Sintex double layer water tank with approved brand including cost of PVC water tank, making connection with input and output water pipe line and valves. Cost inclusive of all materials, labour charges, & conveyance etc., complete and as directed by the departmental officers. |
| 23 | Providing and fixing R.C.C. Pre-cast slab 100mm thick of various size in Cement Concrete 1:1.5:3 including all labour, materials, form work, reinforcement, conveyance and fixing the slab etc., complete complying with AISS and as directed by the departmental officers. |
| 24 | Dismantling Asbestos Cement Sheet roofing (AC Sheet) incliding ridges, hips, velleys, gutters, etc., and stacking the serviceable materials and dispostal of unserviceable materials within a lead of 100 m including all labour, tools, equipments, transport, fuel, etc., complete complying with AISS and as directed by the departmental officers. |
| 25 | Providing and fixing A.C sheet roofing with AC corrugated sheet 6mm thick for roof trusses of shed and shade including cost of sheet, conveyance, fixing the sheet with necessary clamps / screws and labour charges for fixing sheet etc., complete complying with AISS and as directed by the departmental officers. |
| 26 | Supplying, fabricating, erecting and fixing plain Hilux or equivalent board False Ceiling of 10 mm thickness up to a ceiling height of 4.5m from floor level including cost of Hilux Board Plain Sheets 10mm thick, labour charges, accessories, conveyance and erection etc., complete and as directed by the departmental officers. |
| 27 | Supplying and fixing in position of chinnaware Wash Basin (White color) 550 mm x 400mm size with pedestal of approved quality with necessary fittings such as cast iron bracket, 1 no 15mm C.P heavy duty piller tap with pentagonal head, 32mm dia PVC wastewater pipe and 15mm dia nylon connection, 1 No 15 mm dia G.M. wheel valve and fixing it with the wall with necessary plugs, clamps and screws, and giving water supply connection and painting the exposed pipe connection with two coats of paint of approved colour, including all labour, materials etc., complete complying with AISS and as directed by the departmental officers. |
| 28 | Dismantling and removal of Brick Masonry work (BW) in Cement Mortar above G.L. upto floor two level including stacking of serviceable materials and disposal of unserviceable materials within a lead of 100 m including all labour, tools, equipments, transport, fuel, etc., complete complying with AISS and as directed by the departmental officers. |
| 29 | Supplying and fixing in position of Wooden panelled door single shutter including cost of hold fasts and applying one coat of wood primer of approved quality, fixing of first quality ISI standard furniture fittings with screws / bolt & nuts, the rate shall include cost of wood, labour for wrought and put up, etc., complete complying with AISS and as directed by the departmental officers. |
| 30 | Supplying and fixing in position wooden window of various size in all floor with kongu wooden panelled shutters including cost of hold fasts and applying one coat of wood primer of approved quality and including cost and fixing of first quality ISI standard furniture fittings with screws / bolt & nut, the rate shall include cost of wood, labour for wrought and putup, furniture fittings, primer etc., complete complying with AISS and as directed by the departmental officers. |
| 31 | Supplying and fixing in position wooden Ventilator of various size in all floor with hard kongu wood frames as per drawing including cost of hold fasts and applying one coat of wood primer of approved quality and including cost and fixing of first quality ISI standard furniture fittings with screws / bolt & nut, the rate shall include cost of wood, labour for wrought and putup, pin head 3mm thick pressed glass, furniture fittings, primer etc., complete complying with AISS and as directed by the departmental officers. |
| 32 | Providing and laying terrace lime concrete weathering course with grade brick aggregate 25 mm nominal size and 50% mortar comprising of 1 lime putty and 2 surkhi and curing including all materials, labour, etc., complete complying with AISS and as directed by the departmental officers. |
| 33 | Finishing the top of weathering course with one course of machine pressed tiles of size 23 cm X 23 cm X 2cm in Cement Mortar 1:3 (M. Sand (Crushed Stone Sand)) including all materials, labour, etc., complete complying with AISS and as directed by the departmental officers. |
| 34 | Supplying and fixing in position of 600 x 450 mm size Mirror of best make, first quality approved by the department including plywood back, plugs, screws etc., complete complying with AISS and as directed by the departmental officers |
| 35 | Providing and laying approved colour and quality of Stain Free Nano Polish Vitrified Tiles 600 x 600 x 8mm in Cement Mortar 1:4 (M. Sand (Crushed Stone Sand)), 20 mm thick. The rate inclusive of cost of tiles, all materials, labour, white cement, conveyance etc., complete complying with AISS and as directed by the departmental officers. |
| 36 | Painting TWO coats with Plastic emulsion paint of approved brand and colour over New Wall surfaces including one coat of alkalin resistance primer of approved brand so as to give an even shade. Prior to applying the primer, the wall surfaces shall be thoroughly cleaned of all grease, dirt, loose pieces, scales and make the surface even by applying wall putty and make good of the surface with sand paper etc., The cost including preparing the surface, all materials, labour, brushes, scaffolding, etc., complete complying with AISS and as directed by the departmental officers. |
| 37 | Applying One coat of Alkali Resistant Primer and Two coats of APEX - Exterior Emulsion Paint of approved colour and quality over the New wall surface in all floors to give an even shade after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand paperes smooth including all materials, labour, brushes, scaffolding, etc., complete complying with AISS and as directed by the departmental officers. Please Enable Macros to View BoQ information |
