|
| 1 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m |
| 2 | All kinds of soil. DSR 2.10.1 |
| 3 | Pipes, cables etc. not exceeding 80 mm dia. DSR 2.10.1 |
| 4 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings as DSR 17.28 |
| 5 | 32 mm dia : DSR 17.28.1.1 |
| 6 | Providing and fixing soil, waste and vent pipes :DSR 17.35. |
| 7 | 75mm diameter : DSR 17.35.2 |
| 8 | Centrifugally cast (spun) iron socket &spigot (S&S) pipe as per IS: 3989 DSR 17.35.2.2 |
| 9 | Providing and fixing collar : DSR 17.57 |
| 10 | 75 mm DSR 17.57.2 |
| 11 | Sand cast iron S&S as per IS - 3989 DSR 17.57.2.2 |
| 12 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, incl. cost of cutting and making good the walls and floors. DSR 17.60 |
| 13 | 100 mm inlet and 75 mm outlet DSR 17.60.2 |
| 14 | Sand Cast Iron S&S as per IS- 3989 DSR17.60.2.1 |
| 15 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc. : DSR 18.10 |
| 16 | Internal Work - Exposed on Wall |
| 17 | 15 mm dia. nominal bore : DSR 18.10.1 |
| 18 | 20 mm dia. nominal bore : DSR 18.10.2 |
| 19 | Providing and fixing of forged brass / GM Gate Valve |
| 20 | size 20mm i/d DSR 18.17.1A |
| 21 | Providing and fixing uplasticised PVC connection pipe with brass unions : DSR 18.21 |
| 22 | 45 cm length : DSR 18.21.2 |
| 23 | 15 mm nominal bore : DSR 18.21.2.1 |
| 24 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : DSR 18.46 |
| 25 | 15 mm nominal bore : DSR 18.46.1 |
| 26 | 20 mm nominal bore : DSR 18.46.2 |
| 27 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR 18.48 |
| 28 | Providing and fixing of C.P. Brass Extension Nipple Size 15 mm x 50 mm of approved make and quality as per direction of EIC DSR 18.53A |
| 29 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete DSR 18.62 |
| 30 | 20 mm nominal bore, 120 mm long, weighing not less than 198 gms DSR 18.62.2 |
| 31 | Cutting holes up to 30x30 cm in walls including making good the same: DSR 18.76 |
| 32 | With F.P.S. bricks : DSR 18.76.1 |
| 33 | Cutting holes up to 15 x 15 cm in R.C.C. floor and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 including finishing complete so as to make it leak proof . DSR 18.77 |
| 34 | Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.: DSR 18.78 |
| 35 | Providing and fixing Stainless Steel A ISI 304 (18/8) Kitchen Sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required of Size 27\\" x 21\\" x 8\\" of approved make |
| 36 | Providing and fixing of looking glass with PVC beeding 1/4\\" with plastic hard board complete in all respect of approved make |
| 37 | Providing and fixing of C.P. Steel Grating Heavy (With hole without hole) size 4\\" i/d of approved make |
| 38 | Providing and fixing of Wall hung wash basin with full pedestal complete with C.I./MS brackets 32mm C.P. brass waste as per standard pattern including cutting and painting of brackets and making good the walls Make Cera Model CONCORD( Basin - 1022 & Pedestal 1121 ) or equivalent model of approved make to the satisfaction of EIC |
| 39 | Providing and Fixing Chinaware Counter Top Basin 600 x 400 x 160 make Jaquar / CERA / Kerovit / Hindware |
| 40 | Providing and fixing of Anglular stop cock, with wall flange, make Jaquar range CONTINENTAL 053KN or equivalent model of approved make to the satisfaction of EIC |
| 41 | Providing and fixing of Bib cock with wall flange, make Jaquar range Continental Model CON-047KN or equivalent model of approved make to the satisfaction of EIC |
| 42 | Providing and fixing of Long Body bib cock with wall flange, make Jaquar range Continental Model CON-107KN or equivalent model of approved make to the satisfaction of EIC |
| 43 | Providing and fixing of Central Hole Mixer with 450 mm long braided hoses, make Jaquar range Continental Model CON-167KNB or equivalent model of approved make to the satisfaction of EIC |
| 44 | Providing and fixing of Wall Mixer with Hand Shower Arrangement with Connecting Legs, Wall Flanges & Wall bracket for Hand Shower, make Jaquar range Continental Model CON-281KN or equivalent model of approved make to the satisfaction of EIC |
| 45 | Providing and fixing of Sink Mixer with Swiniging Casted Spout ( Wall Mounted Model ) with connecting legs and Wall Flanges complete make Jaquar range Continental Model CON-309KN or equivalent model of approved make to the satisfaction of EIC |
| 46 | Providing and fixing of chinaware One Piece Floor mounted European Type Water Closet with all other fitting including EWC, Cistern, Seat Cover and fitting etc complete. Make CERA Model CRUSE / CAMPBELL or equivalent model of approved make to the satisfaction of EIC |
| 47 | Providing and fixing of C.P. Towel Rail 600 mm long complete in all respects make Jaquar range Continental Model ACN-1111NM or equivalent model of approved make to the satisfaction of EIC |
| 48 | Providing and fixing of C.P. Towel Ring Square with round flange complete in all respects make Jaquar range Continental Model ACN-1121N or equivalent model of approved make to the satisfaction of EIC |
| 49 | Providing and fixing of C.P. Tumbler Holder complete in all respects make Jaquar range Continental Model ACN-1141N or equivalent model of approved make to the satisfaction of EIC |
| 50 | Providing and fixing of C.P. Towel Rack 600mm Long With Lower Hangers Complete in all respects Make Jaquar range Continental Model ACN-CHR-1185S or equivalent model of approved make to the satisfaction of EIC |
| 51 | Providing and fixing of Corner Glass Shelf ( with bracket ) make Jaquar range Continental Model ACN-1173N or equivalent model of approved make to the satisfaction of EIC |
| 52 | Providing and fixing of Shower Arm Wall Mounted with Wall flange |
| 53 | SHA 479L450 / 450 mm long round or equivalent model of approved make to the satisfaction of EIC |
| 54 | Providing & fixing of Overhead Shower Square Shape Single Flow Make Jaquar Model |
| 55 | 150 mm / OHS 1605 or equivalent model of approved make to the satisfaction of EIC |
| 56 | Providing and fixing of Hand shower Round Shape ( ABS body Chrome Plated with Gray Face Plate ) with Rubit Cleaning System make Jaquar Model |
| 57 | 80 mm dia / HSH 1937 or equivalent model of approved make to the satisfaction of EIC |
| 58 | Providing and fixing Easy Flex Tube in Chrome Finish 1.5 mtr long with nuts complete make Jaquar Model SHA-549 or equivalent model of approved make to the satisfaction of EIC |
| 59 | Providing and fixing of C.P. Toilet Roll Holder complete in all respects make Jaquar range Continental Model ACN-1151N or equivalent model of approved make to the satisfaction of EIC |
| 60 | Providing and fixing of C.P. Soap Dish Holder complete in all respects make Jaquar range Continental Model ACN-1131N or equivalent model of approved make to the satisfaction of EIC |
| 61 | Providing & fixing Hand Shower (Health Faucet) (ABS Body) with 8mm Dia 1.2 Meter Long Easy Flexible Tube and Wall Hook Finish Chrome complete in all respects Make Jaquar Model ALD-CHR-573 or equivalent model of approved make to the satisfaction of EIC |
| 62 | Providing and fixing of CP Wash Basin & S.S Sink Waste Please Enable Macros to View BoQ information |