Tender For Special Repair To Bldg No P-8 At Af Stn Highground And Addn/ Altn To Certain Smqs At Af Stn Highground., Highground-Chandigarh

TDR : 55394012

Tender Notice
BOQ

23 Days Left

Highground , Chandigarh

Tender Brief : Tender For Special Repair To Bldg No P-8 At Af Stn Highground And Addn/ Altn To Certain Smqs At Af Stn Highground.

Document Fees
₹ 1000 /-

EMD
₹ 180740.0 /-

Tender Value
Refer document

Submission Date
05-06-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Buildings portion
2	Demolition of cement concrete in ground floor and pavings not exc 15cm thickness below or above ground level, including removing the debris from the site to a designated point by the civil administration complete all as specified and directed by Engineer-in-Charge.
3	Taking down cement plaster or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc of any description and any position, including removing the debris from the site to a designated point by the civil administration complete all as specified and directed by Engineer-in-Charge.
4	Dismantling floor, health or wall tilling including cement mortar bedding (but not backing removing survicabletiles to store and rubbish including removing the debris from the site to a designated point by the civil administration complete all as specified and directed by Engineer-in-Charge.
5	Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area n.exc 1.5 Sqm each, with and including make good the diturbed surface wit PCC 1:2:4 B0 and CM 1:4 to make the surface and edges finished to recive the window/door chowkhats complete all as specified and directed
6	Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area exc 1.5 Sqm but n.exc 4 Sqm each, with and including make good the diturbed surface wit PCC 1:2:4 B0 and CM 1:4 to make the surface and edges finished to recive the window/door chowkhats complete all as specified and directed
7	Taking down shutters of any description having area exc. 1sqm but not exc. 2sqm each and removing from site all as specified.
8	M&L First quality, Non skid ceramic coloured tiles laid in floors, (square/ rectangular) area of each tile exceeding 0.06 Sq.m but not exceeding 0.11Sq.m, 7-8 mm thick with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:6) including pointing in white cement with pigment to match the shade of tiles, complete all as specified and directed.
9	M&L First quality, Non skid ceramic coloured tiles laid in floors, joint free (square/ rectangular) area of each tile exceeding 0.11 Sq.m but not exceeding 0.38Sq.m, 8 to 10 mm thick with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:6) including pointing in white cemen0t with pigment to match the shade of tiles, complete all as specified and directed.
10	M & L for glazed ceramic coloured tiles 450 X 300 X 7 to 8 mm thick on vertical surfaces/dado skirting joint free, set and jointed in neat cement slurry and pointed in white/colour cement to match over and including 10mm thick cement mortar as in backing coat of tile in cement mortar 1:4, Complete all as specified and directed .
11	Demolition stone slabs and tiles of any description or thickness in floors/ dado, aprons etc., laid bedded and pointed in any mortar, complete all as specified and directed.
12	Demolition of brick work built in CM including all quoins arches pillars all as specified.
13	M&L Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry @ 3.0 cement per sqm complete all as directed as specified by EIC.
14	M/L Machine cut Pre-polished Kota stone slab flooring 18-20mm thick as in floor, treads of stairs case over 15mm thick cement screed of cement mortar 1:6 base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab complete. Note : (Kota stone fixed in staircase tread shall be of single piece) .
15	M/L Machine cut Pre-polished Kota stone slab flooring 55X55 X 18-20mm thick as in floor, mid landing of stair case over 15mm thick cement screed of cement mortar 1:6 base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab etc complete.
16	M/L Machine cut Pre-polished Kota stone slab 16-18mm thick as in vertical surface, riser of stairs case over 10mm thick cement screed of cement mortar 1:4 base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab as in risers of steps, skirting, dado etc complete. Note : (Kota stone to be fixed in staircase Riser shall be of single piece)
17	M & L for Granite (of any type ) 16 to 18 mm thick, work (table rubbed and polished) fine grained 'Z' black/red in cooking platforms/Jambs including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including screed bed of 15 mm thick in CM 1:4, complete all as specified.
18	Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations
19	M&L Brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6), using old size bricks.
20	All as per item No 19 but except brick work
21	M&L for rendering 15 mm thick on brick or concrete surfaces in cement mortar 1:6 finished even and fair without using extra cement, complete all as specified as per directed (Internal plaster).
22	M&L for rendering 15 mm thick on brick or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement, complete all as specified (External plaster).Note:- The rate quoted by contractor is deemed to be included necessary scaffolding and form work upto 12Mtr height or (G+2) storey building.
23	M&L for rendering 10 mm thick in cement mortar (1:3), as on concrete surfaces in ceiling (such as chajja,beams, roof projection, balcony, mumty and staircase flight ceiling, roof slab etc.) finished even and fair without using extra cement, complete all as specified and directed by Engineer - in -Charge.NoteThe rate quoted by contractor is deemed to be included necessary scaffolding and form work upto 12Mtr height or (G+2) storey building.
24	M&L for rendering 15 mm thick plaster (1:3) in cement sand mortar with integral water proofing compound for repair of distressed RCC member including scaffolding for suitable working platform as in column, beams, chajja and roof projection, facia by with and including fiber mesh, finishing the surfaces even and smooth without using extra cement and icluding taking down all as specified and directed by Engineer in Charge.Note : (i) Rendering should be done in two layers . First Layer 10mm thick and Second layer 5 mm thick after over wire netting of galvonised mild steel wires of 0.91mm dia and average size of wire mess 20mm fixed with tinned tacks.(ii) Removing all disintegrated and loose portion and cleaning the rust from exposed reinforcement, removing, rusted scales by chipping and cleaning by wire brushes.(iii) The rate quoted by contractor is deemed to be included necessary scaffolding and form work upto 10Mtr height or (G+2) storey building.
25	M& L for 75 mm thick Cement concrete type C1, 1:3:6 (using 20 mm graded stone aggregate) in plinth protections, finished even and without using extra cement including forming of construction joint @ 2.5 meter Centre to centre & corner & filled with bitumen (80/25) and sand in ratio of 1:6 etc Complete all as specified and directed.
26	Supply and fix, factory made pressed steel frames for doors with one or more rebates, of size 125mmx60mm, made out of 1.25mm thick sheet, including necessary fixing lugs, hinges, lock strike plate, with and including 25mmx 50mm MS tube 2mm thick stopper welded to chowkhat, and including cement concrete 1:2:4 (type B0) with 12.50 mm graded stone aggregate in backfilling of chowkhats etc, complete all as specified and directed.
27	Supply and fix, factory made pressed steel frames for doors with one or more rebates, of size 105mmx60mm, made out of 1.25mm thick sheet, including necessary fixing lugs, hinges, lock strike plate, with and including cement concrete 1:2:4 (type B0) with 12.50 mm graded stone aggregate in backfilling of chowkhats etc, complete all as specified and directed.
28	M&L for plain cement concrete (1:3:6), type C-0, (using 12.5mm graded crushed stone aggregates) as in bed block, blocks for holdfasts, filling in pressed steel door frames , benching slightly rounded or chamfered angles & throating etc including necessary use & waste of form work complete all as specified and directed.
29	Cutting holes in brick walls exc half brick but n exc one brick in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required
30	M & L for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete
31	Supply and fix, factory made flush shutters 35 mm thick,solid core construction with block board core and plywood face panels commercial type on both sides, duly provided with 6mm thick Teakwood leeping on edges alround, fitted to chowkats, complete all as specified & directed.
32	S&F factory made Second class hardwood glazed and skeleton door shutters on 35mm thick, in three equal penals open rebated and prepared to receive glass, gauze, etc, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete, complete all as specified.
33	Supply and fixing 25mm thick solid core construction with block board core and plywood face panels commercial on both side
34	S&F in repair18/19 mm thick Prelaminated particle, board, interior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination, fixed with screws to timber frame work/in brick wall as in shelves complete alll as specified
35	S&F 18/19 mm thick Prelaminated particle, board, exterior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination, fixed with screws/dashfastener to timber frame work or in brick wall as in kitchen cabinet complete alll as specified
36	Magnetic catcher with Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed suitable for kitchen cabinate/cupboard,complete all as specified and directed by Engineer-in- Charge.
37	M&L 2nd class hard wood plain fillets, square, rectangular or trinagular in section, clean sawn, secured with nails or brads, sectional area exc 13 sqcm but n.exc 25 sqcm fixed as frame work of cupboard, cabinet etc and fixed to existing wall with SS screws and PVC plugs complete all as specified and as directed.Note :- Treating wooden surface joint with wall surface with a coat of black paint .
38	S & F Factory made single rebated extruded WPC (Wood Polymer Composite) solid door/ window/ S & F Ceosetory windows & other Frames/Chowkhat of size 50 x 75 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). complete as per direction of Engineer-in-Charge.
39	Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain door shutter of size 30 MM thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisturproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)
40	S&F Factory made box type steel window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars, including flat iron 12 x 3 mm for securing wire mesh, dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEAF/STD-185-2012 Sheets 1/2 & 2/2.
41	S&F Factory made box type steel window with pintle hinges & 1 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars, dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEAF/STD-185-2012 Sheets 1/2 & 2/2.
42	S&F for factory made box type steel window/ventilator fixed type,dovetailed or wielded and with one coat of zinc chromate primer complete all as specified and directed
43	S&F 100mm stainless steel butt hinges, with stainles steel hinge pin & fixed to WPC 30 mm thick door using stainless steel screws complete all as specified & as directed. Make Prayag Cat part No-PHW-38
44	S&F contineous (piano hinges, Stainless steel, with width of flaps 30 mm when open, bright finish or electrogalvanised
45	S&F 100mm size Stainless steel Hasp and staple, safety type for shutter, with mild steel hinge pin including bolt to hinge plate and fixed with screws.
46	S&F, 150mm long, aluminium anodized, barrel tower bolts of extruded section, ISI marked, complete all as specified and directed.
47	S&F, 200mm long, aluminium anodized, barrel tower bolts of extruded section, ISI marked, complete all as specified and directed.
48	Supply and fix 150mm size saluminium handle cast type pressed handle Ovel type ISI marked, complete all as specified and directed.
49	S&F 250 mm long aluminium alloy anodised, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy, ISI marked, complete all as specified and directed by Engr in charge.
50	S&F spring for doors 300 mm mild steel ordinary rat tail rod pattern spring including roller & roller plate, complete all as specified and directed.
51	S&F 125 mm size stainless steel handles medium duty and fixed with SS screw complete all as specified & as directed.
52	S&F 75 mm size stainless steel handles medium duty and fixed with SS screw complete all as specified & as directed.
53	Mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders framed balusters; walk ways; railings; and similar work conforming to Fe-290 Gde-E-165, complete all as specified and directed.
54	Supply and fixing, stainless steel wire mesh, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed to steel frames with tinned tacks, or galvanized wire staples, or fixed to wooden frames with first class hard wood bead, complete all as specified and directed.
55	Supply and fixing in repair, stainless steel wire mesh, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed to steel frames with tinned tacks, or galvanized wire staples, or fixed to wooden frames with first class hard wood bead, complete all as specified and directed.
56	Supply and fixing in repairs, stainless steel drapery rod of 25mm dia, 3mm wall thickness of 25mm drapery rod, any shade, including set of fixing SS brackets, fixed to wall with stainless steel finols/finnels, connected accessaries, rubber packing, required screws and PVC rawal plugs as required complete all as specified and as directed.
57	Demolition Brick/PCC tiles or terracing tiles, single layer on roofs, etc compelete all as specified and Directed
58	Demolition of cement concrete as in roof pading , any thickness and any descrition upto RCC roof slab ,cleaning the surface including flashings and junction of parapers, etc with wire brushes and water to the entire satisfaction of Engineer -in -Charge including removing the debris from the site to a designated point by the civil administration complete all as specified and directed by Engineer-in-Charge.
59	M&L for cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate as padding in roof including necessary formwork as specified, if required. Note :- Padding concrete shall be laid to maintain the slope with thickness at lower end and at ridge as directed by Engineer in Charge. Contractor shall provide leveling bench mark at ridge level and up to edges with distances as specified by Engineer in Charge with water proofing compound.
60	M&L for cement concrete 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as in roof kerbs or mud stops, chajja rounded or chamfered on edges etc complete all as specified and directed with water proofing compound.
61	Surface Preparation: Existing Surfaces must be clean, even, and soundconcrete. Remove oil, dirt, laitance.M & L for Crack treatment: Cutting and opening cracks to a depth of 10x10 mm V or U Shape by mechanical means. Cleaning al the dirt and loose particles by air pressure and wetting crack to attain SSD condition. filling the crack using Repair Polymer modified cement mortar. Bore Packing: Using AP Smartcare Repair Polymer over pipe and Internal side of concrete followed by filing high strength non shrink grout for a gap of up to 20mm (between pipe and concrete) before treating the surface with Waterproofing layer. Supplying and applying SmartCare Damp Proof Ultra, fiber reinforced elastomeric liquid waterproofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibers with Sun Reflectivity Index (SRI) of 105 on top of roof in three coats @ 1.8 Kg/sqmt to be reinforced, having minimum elongation of 350%, tensile strength 2.9Mpa and shall have crack bridging ability of up to 2.5mm and shall resist 10bars of hydrostatic pressure, reduces surfaces temperature up to 10 degree Celsius also IGBC certified (Indian Green Building Council) Certificate will be provided by company. The system consists of self-priming with 33% water dilution followed by two undiluted coats of Damp Proof ultra,the fibermesh of 40 to 50 GSM must be sandwich between 1st and 2nd coat of Damp Proof Ultra.(dry film thickness of complete application/system not less than 500 microns) and Ponding test to be done after application of material.Note-(i) Water proofing coating shall be extended 300mm to the parapet and crumple joint including junction of roof and prapet.(ii) While doing the treatment on existing roof,concrete should be throughly inspected for any significant distress,such distress if any shall be repaired/rehabilitated and treated.(iii) The work of water proofing to roof and sunken portion shall be executed by the manufacturer's authorized trained/skilled applicator as per technical guidlines and apllication methodology of the manufacturer. A MOU is to be executed between the contractor and manufacturer and the same will be got approved from the GE/AGE(I) before commencement of work. The contractor will arrange to provide company back gurantee for the water proofing for the period specified here-in-after
62	Supply only water proofing compound ISI marked complete all as specified. Make: Pidiproof WL (Dr Fixit) or equivalent ISI marked make as approved by GE.
63	S&F in repairs Vitreous China wash down water closet with plastic seat cover (pedestal pattern), white (excluding fixing bolts flushing cistern and flush pipe) to fit WC outlet including connection to trap, to flushing pipe, anti-syphonage pipe etc. complete all as specified and directed.
64	S&F in repairs Health faucet (ABS Body) stainless steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.
65	S & F in repair 10 litres capacity, PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as specified and directed.
66	S&F for PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.
67	S & F in repairs angle cock cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm bore iron pipe or for brass ferrule complete all as specified.
68	S&F in repairs bib cock long body with flange, cast copper alloy, chromium plated, fancy type, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule and fixed in repairs, complete all as specified.
69	S&F in repairs 2-Way Bib Cock Double Handle with Wall Flange cast copper alloy, chromium plated, fancy type, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule and fixed in repairs, complete all as specified. Make - Prayag Cat No. 6512
70	S&F in repair Brass CP central hole wash basin mixer with 450mm braided connection pipe (without pop-up) for mixing hot & cold water for 15mm bore iron pipe and fixed as in repair, complete all as specified and directed by Engineer-in-Charge. Make- Prayag Cat Part-9350N. and equivalent make.
71	S&F in repair Wall mixer with L bend (provision for over head shower), cast copper alloy, chromium plated for mixing hot and cold water, screwed down for 15mm bore iron pipe, complete all as specified and directed. Make- Prayag Cat Part-7375N. and equivalent make.
72	S & F 15mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors complete including taking down old unseviceable all as specified and directed.
73	S&F steel water tubes, 20 mm bore medium grade, galvanized with all fittings and fixed complete to walls, ceiling or laid in floors, including taking down old unseviceable complete all as specified.
74	Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.
75	M&L rotational moulded PVC, triple layered, white colour water storage tanks of capacity 500 litre (cylindrical vertical with closed theard pettern top cover), ISI Marked, hoisted and fixed in position, with & including all fittings such as GI tank nipple etc, including all valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, ISI marked (Minimum weight 210 gms), screwed & suitable for iron pipe 20 mm bore and dismantling unserviceable PVC water tank complete all as specified and directed.
76	Fixing only rotational moulded PVC, triple layered, white colour water storage tanks of capacity 500 litre (cylindrical vertical with closed theard pettern top cover), ISI Marked, hoisted and fixed in position, with & including all fittings such as GI tank nipple etc, including all valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, ISI marked (Minimum weight 210 gms), screwed & suitable for iron pipe 20 mm bore and dismantling unserviceable PVC water tank complete all as specified and directed.
77	S&F in repairs 20mm bore dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
78	S&F in repairs wash basins, vitreous china, white, rectangular type of size 550x400mm including brackets and cutting for and pinning in ends of brackets or erecting stand 32mm dia waste (PTMT Coupling) fittings, brass, chromium plated with long screwed shanks and fly nuts, over and including new brackets complete all as specified and directed.
79	S & F in repair, sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes coupling; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm® 18278 Complete all as specified and directed by Engineer-in-Charge. (Make: Prayag/Nirali)
80	S&F in repair Wall Mount Modern Kitchen Utensils Dish Rack Stainless Steel (31X30X10 Inches) as approved by Engr in chargeMake- Prayrag Cat Part No- PSP-5
81	S&F in repair PVC waste pipe flexible for Sink/ WHB of 32mm size complete all as specified and directed.
82	S&F Corner glass shelf of radius 300 mm including 02 Nos. metallic holding brackets, railing etc. fixed with PVC rawl plugs and wooden screws, fixed in repairs as approved by GE/Engineer in Charge, complete all as specified and directed.
83	S&F Rectangular Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed with PVC rawl plugs and wooden screws as fixed in repairs as approved by GE/Engineer in Charge, complete all as specified and directed.
84	S&F in repair soap dish brass, chromium plated fancy type of standard size and specification as directed and fixed to plugs with chromium plated brass screws.
85	S&F in repair Brass chromium plated shower rose 125mm with shower arm 15mm size, 195mm long with bend of 45 degree with flange including fixing to steel pipe or union complete all as specified and directed.
86	S&F in repairs looking mirror 600 mm x 450 mm beveled edge mirror of selected quality glass mounted on 6 mm thick commercial plywood with decorative type wooden frame and fixed to wooden plugs with steel screws, complete all as specified and directed.
87	S&F in repairs towel rail 600 mm long, 20 mm dia, ‘D’ type, chromium plated, fixed to walls with screws and plastic cleats, complete all as specified and directed. Make-Prayag SS Towel Rail Cubix Cat No. CPA-46
88	S&F in repairs chromium plated grating doom 125mm dia with or without hole complete all as specified and directed.
89	Taking down eaves gutters and rain water pipes (any size or pattern), including all firrings, heads, shoes, bends,swan neck etc,inluding cleaning or refixing or removal to store (measured over all as fixed along the centre line over fittings and accessories)
90	S&F 110 mm bore PVC (SWR) pipes with, single socketed in any length with rubber ring joints fixed in floor complete all as specified and as directed.
91	S&F PVC (SWR) pipes 75mm dia of Sngle socketed, in any length with rubber ring joints, fixed in floors complete all as specified and as directed.
92	S&F 110 mm bore PVC (SWR) pipes with, single socketed in any length with rubber ring joints fixed to wall as directed complete all as specified.
93	S&F PVC (SWR) pipes 75mm dia of single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.
94	S&F PVC (SWR) bends 75mm dia any radius provided with access door as specified and directed.
95	S&F PVC (SWR) bends 110mm dia any radius all as specified and directed.
96	S&F PVC (SWR) bends 75mm dia any radius provided with out access door as specified and directed.
97	S&F PVC (SWR) junction single, (single T) 110mm dia any radius provided with access door all as specified and directed.
98	S & F in repair PVC floor trap 75m dia with grating (with/without hole as reqd) incl jointing with solvent cement, complete.
99	S&F 110mm PVC (SWR) vent cowl complete all as specified and directed.
100	S&F in repair PVC gully Trap 125mm setting and jointing with solvent cement
101	Demolition of lime concrete/ cement concrete/ brick bats from sunken portion (above ground level), including removing debris away from site to a designated point by local administration or a distance upto 1.5 KM from site.complete all as specified and directed.
102	Water proofing treatment to sunken portion of WCs, bathroom etc. by applying cement slurry mixed with Acrylic based polymer modified cementitious composite compound coating of make as approved in Technical Instruction 5/ 2003:-(a) 15 mm thick plaster (1:4) in cement sand mortar with integral water proofing compound 2 % by weight of cement on floor and wall, finishing the surfaces even and smooth without using extra cement. The surface shall then be cured and allowed to dry. (Note: Supply only water proofing compound shall be measured and paid separately).(b) First layer of slurry of cement @ 0.488 Kg/Sq.m mixed with Acrylic based polymer modified cementitious composite compound @ 0.253 Kg/Sq.m. This layer will be allowed to air cure for 4 hrs.(c) Second layer of slurry of cement @ 0.242 Kg/Sq.m mixed with Acrylic based polymer modified cementitious composite compound @ 0.126 Kg/Sq.m. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.
103	M&L cement concrete (1:2:4) type B0 (Using 12.5mm graded aggregate) as in sunken portion or similar items as in filling complete all as specified and directed.
104	M&L for cement concrete (1:7:12), type E-2, using 40mm graded brick aggregate, as in sunken portion/sub base, complete all as specified and as directed.
105	S&F Steel water tubes, 50 mm bore , light grade, galvanized, as in spout for sunken floor, fixed in wall, inside end fixed with wire netting and external beveled edge at 45 degree, complete all as specified and directed by Engineer - in -Charge.
106	M&L preparation of new plastered surfaces of walls and apply two coat of oil acrylic distemper over a coat of primer incl wall care putty of interior grade upto 1mm thick wall care putty to smoothening the surface by using sand paper, complete all as specified and directed.
107	Material & Labour for applying of new plaster external surface of wall Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over 1mm thick exterior wall care putty up to 1mm thick of new plaster and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new plastered of any description 12M upto G+2 building, including necessary scaffolding, complete all as specified and directed. Note: Weather proof exterior emulsion paint and primer shall be of same manufacturer.
108	M&L for complete removal of existing treatment from internal surfaces on walls by wire brushes and applying with one coat of int wall care putty up to 1mm thick to obtain smooth regular/even finish surfaces by using sand paper and applying two coats of Acrylic Distemper, complete all as specified and directed.
109	Preparation of old surfaces of ceiling including brooming down or steel wire brushing, scraping down smoke soot, moulds, mooss and efflorescent salts and trading oil and greasy spots etc and one coat of 1mm average thick cement wall care putty to obtain smooth regular/even finish surfaces by using sand paper and applying two coats of white wash complete all as specified and directed.
110	Preparation of new plastered surface in ceiling and applying one coat of 1mm average thick cement wall care putty to obtain smooth regular/even finish surface by using sand paper and applying three coats of white wash complete all as specified and directed.
111	M&L for complete removal of existing treatment and preparing plastered or unplastered old surfaces of walls including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and filling the cracks/holes with external wall care putty up to 1mm thick to rubbing down and stoping of surfaces using sand paper and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on old surfaces of any description complete all as specified and directed.
112	M&L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified.
113	M&L for preparation of old painted wooden surfaces over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint, complete all as specified and directed.
114	M&L for preparation of new surfaces of steel and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
115	M&L for preparation of old painted surfaces of steel of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified & directed.
116	Demotion cement Concrete (Reinforced) of any description and in any position not otherwise specifically provided any thickness and any length etc
117	M&L for 1:2:4 (20mm garded aggregate) Type B1 Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including necessary formwork
118	M & L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc. all as specified and as directed.
119	Door seal strip with plastic beading, , complete all as specified and directed by Engineer-in-Charge. Make : BEETA.
120	Providing precast cement concrete in landing covers slab (for manholes etc.) chullah hoods chajjas water troughs,mangers, shelves and similar articles with plain faces
121	Welding in repairs not exceeding 2.5cm in length (thickness of metal to be welded not exceeding 6mm) including cleaning preparing the surface and holding the members in true position for maintenance of steel items such as hand rails and windows etc., complete all as specified and as directed.
122	S&F 4mm thick sheet glass ordinary quality and glazing with oil putty or fixed with wooden beads having area not exc, 0.50sqm in each pane all as specified.
123	Hacking out old broken glass from metal frame or wooden frames incl punching or drilling out old glazing pins/spring clips of any area
124	Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed.
125	Dismantling wrought iron or mild steel works of any description not otherwise provided for.
126	S&F framed brackets of angles or tees with web and flanged cut to shape, drilled and countersunk for screw, incl bending and welding angles as necessary guesset plates, reveting, wtc., n.exc 10 Kg each brackets conforming to Fe 290, Gde-E-165 (Brackets conforming each to be measured under structureal steel.) complete all as specified and as directed.
127	S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. Conforming to IS code 277:2018 for GI sheet, 15965: 2012 for aluminium zinc coating and IS 14246:1995 for prepainted colour coating
128	S&F pre-painted galvalume aluminium zinc coating GI based plain sheet steel sheet0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.Conforming to IS code 277:2018 for GI sheet, 15965: 2012 for aluminium zinc coating and IS 14246:1995 for prepainted colour coating
129	M &L providing cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in roof kerb or mud stops, rounded or chamfered complete all as specified and directed by Engr-in-Charge.
130	Taking down existing bitumen felt roof treatment, chiselling existing bituminous coating and rubbish off the premises out side the MoD land complete all as specified.
131	Demolition of mud phuska on roofs any thickness including mud plastering (whether full thickness removed or only a part thereof) and removal the same outside the MoD land, complete all as specified
132	M&L for rendering 10mm thick in cm 1 : 4 on concrete surfaces (when concrete is green) and rendering is to be even and fair with water proofing compound as per manufactures instructions compelete all as specified and directed. (Note :- WPC to be paid measured and paid sepratelly)
133	M&L preparation of newly plastered surface of wall and applying two coats of cement base paint over priming plastered and other surfaces with alkali resistance exterior priming paint complete all as specified and as directed.
134	M&L preparation of old painted wall surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss, fungas and efflorescent salts and trading oil and freasy spot etc and applying two coat of cement base paint complete all as specified.
135	M&L preparation of old painted surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss, fungas and efflorescent salts and trading oil and freasy spot etcand applying two coats of whtie wash complete all as specified.
136	M&L preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified.
137	M&L preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified.
138	M&L preparation of old plastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss, fungas and efflorescent salts and trading oil and freasy spot etc and applying two coats of whtie wash complete all as specified.
139	Cutting openings, through brick walls built in cement mortar by mechanical means for inserting precast RCC blocks, other openings or enlarging existing openings etc cutting out brick work for under pinning, incl providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hardcore etc complete all as specified and as directed.
140	S&F mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (anealed) not less than 0.9 mm dia or securing with clips.
141	M&L providing precast reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier, caps, columns, pillars, bed plates, pintle blocks, anchorage blocks, bounder (for stone walling), setting in cement mortar 1:4 complete all as specified and directed.
142	Material & labour cutting out cracks by mechanically of minimum width 5mm and depth equal to width in existing wall, cleaning out and apply Dr Fixit Crack -X Paste (Make : Pidilite or Equivalent) complete all as specified.
143	S&F GI wire netting 0.91 mm dia and 25 mm mesh lathing to brick wall with screw and PVC rawal plug and washer compete all as specified and directed
144	Taking down rolling shutter of any size and type including GI/CR steel laths, shaft, springs, side guiders, locking arrangement, ball bearings, hood cover, brackets, bottom locking bar and all connected fittings compete safely without damage to existing structure opening, repair damaged portion as per existing surface complete all as specified and as directed.
145	S&F 1.25 mm thick cold rolled mild steel rolling shutters, machine pressed with interlocking arrangements and deep corrugation for rigidity complete as specified incl top cover, MS guide channel 3.15 mm thick, anchoring rod, MS bracket plates, bottom locking arragements, heavy duty coiled mild steel springs for smooth operations, heavy duty MS shaft pipe, necessary locking arrangement at both side and one shop coat of primer erected in position as indicated complete but gear operated ype with bevel gear box and crank handle complete all as specified and as directed.
146	M&L for coloured Anti skid ceramic tiles of 7mm to 8mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm in skirting, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick beddingbacking layer in cement mortar 1:4 for laying floor finishes complete all as specified & directed.
147	S&F coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 10 mm thick plastering as backing layer in cement mortar 1:4 complete all as specified and directed.
148	M&L 75 mm thick cement concrete type D-2 1:4:8 (using 40 mm graded crushed stone aggregate), as in sub base of floors complete all as specified and as directed.
149	S&F chequered cement concrete tiles 30 cm x 30 cm x 22-25 mm thick with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors over 20 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed..
150	S&F Acid resistance tile 15 mm thick vitrious ceramic, unglazed, set jointed and pointed in chemical resitance mortar resin type in floors over 15 mm thick acid resistance mortar screed bed 1:4 ratio with suitable chemical resistance additives laid to proper slope and line, the joint filled with furan resin based chemical resistance mortar incl surface preparation cleaning curing and as per manufacurer's direction complete all as specified and directed.
151	S&F Acid resistance tile 15 mm thick vitrious ceramic, unglazed, set jointed and pointed in chemical resitance mortar resin type in dado/skirting over 10 mm thick acid resistance mortar as in backing in 1:3 ratio with suitable chemical resistance additives, the joint filled with furan resin based chemical resistance mortar incl surface preparation cleaning curing and as per manufacurer's direction complete all as specified and directed.
152	Demolition of unreinforced cement concrete in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and directed.
153	S&F in repair Vitreous china laboratory sink (acid resistance) of size (600 x 450x 200 mm), white, flat back, supporting on and including suitable angle iron bracket, including 32mm dia CP brass coupling, along with PVC waste pipe complete, including connection to pipe etc, with including & pinning in ends of brackets and taking down and removal of old wash hand basin , complete all as specified.
154	Dismantiling ceiling/wall panelling boards of any description including cover fillets, and removal of debris/rubbish out of premises complete all as specified.
155	Supplying & fixing modular false ceiling with vinyll laminated gypsum tiles having 8 mm thick False ceiling tiles of approved texture/design of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections with modular Lay-In-Grid ceiling system, which includes fixing of E-grid framework comprising of pre coated wall angle of size 24x24x3000mm and 0.35mm thick screw fixed to periphery of the walls / partitions at the required ceiling height with PVC dash fastners (nylon sleeves) and steel screws at 600mm c/c . GI main Tee runners with pre coated steel capping of size 24x38x3600/3000mm and 0.25mm thick shall then be suspended from the soffit (or purlins) with 4mm dia hanger GI wire, soffit cleat of size 27x37x25x1.6mm and dia 6x40mm Metal anchor fastners at 1200 mm c/c ( in case of purlin, the 6mm GI suspender wire shall be wrapped around it ). Cross Tee of size 24x26x1200mm and 0.25mm thick are then insert fixed into the main Tee runner @ 600mm centres and in direction perpendicular to it , for 600x1200mm module grid, Finally for the required 600x600mm grid module 600mm Cross Tee of size 24x26x600mm and 0.25mm thick shall be insert fixed into the 1200mm Cross Tee @ 600mm centres and in direction perpendicular to it, complete all as specified and directed by Engineer-in-Charge.(ii) Damaged portion of wall/ceiling during dismantling and refixing of ceiling required tobe repair with similar treatment.Make : Armstrong/Everest or equivalent.
156	S&F 40 mm thick 2nd class hardwood rail and styled plain framed panelled shutter (three or more panel as required) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commerecial veneering on both faces incl wooden door stopper. The size of rail and stiles as per IS : 1003 (Part-I), klin seasoned and chemically pressure treated complete all as specified and directed.
157	S&F powder coated aluminium (minmim thickness of powder coating 50 micron) work of doors, windows, ventilators and partiions (Fixed portions/frames/chowkats etc) with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS 733 nad IS:1285, fixing with dash fasteners of required dia and size, including necessay fitting up the gaps at junctions, i.e. at top, bottom and sides with required EPDM runner / neoprene gasket etc, Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle. Aluminium snap beading for glazing / panelling, CP brass / stainless steel screws, all complete as per architectural drawings and the direction of Engineer-in-Charge.
158	S&F powder coated anodised aluminium door shutters, aluminium section not less than 2mm thick incl necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges aluminium snap beading screws etc. complete all as specified.
159	S&F 140 mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor
160	S&F Brass 4 levers mortice lock, vertical type, size 100mm complete all as specified.
161	S&F 4.8 mm thick sheet glass ordinary quality and glazing in aluminum frame work in square exc 0.5 sqm in each pane complete all as specified and as directed..
162	9 mm thick Prelaminated particle, board, exterior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination, fixed with screws to timber frame work
163	S&F aluminium (Die cast body) door closer hydraulically requlated designation No. 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight 61 to 80 Kg and fixed complete all as specified and as directed.
164	S&F in repair aluminium (Die cast body) door closer hydraulically requlated designation No. 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight 61 to 80 Kg and fixed.
165	S&F powder coated aluminium (minmim thickness of powder coating 50 micron) work for shutters of doors, windows (sliding type 3 track), ventilators including providing and fixing locking system with handle and making provision for fixing of fittings wherever required like roller for sliding shutter including the cost of EPDM rubber /neoprene gasket required with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS 733 nad IS:1285, fixing with dash fasteners of required dia and size, including necessay fitting up the gaps at junctions, i.e. at top, bottom and sides with required EPDM runner / neoprene gasket etc, Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle. Aluminium snap beading for glazing / panelling, CP brass / stainless steel screws, all complete as per architectural drawings and the direction of Engineer-in-Charge.Note :- Only weight of aluminium section considered for measurement.
166	S&F powder coated aluminium gril 8mm thick (minmim thickness of powder coating 50 micron) of approved design /pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @200 mm centre to centre, including, cutting the grill to proper opening size for fixing and operation of handles and fixing approved powder coated aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.
167	Hacking out old broken glass (any thickness, size, quality or description) from metal frame incl punching or drilling out old glazing pin, spring/clips and providing and fixing new ones.
168	S&F 4.0 mm thick sheet glass ordinary quality and glazing with aluminum bead in square/rectangular in each aluminium window frame work n.exc 0.5 sqm frame work complete all as specified and as directed.Note : Cost of aluminium bead shall not be included.
169	S&F 4mm thick frosted sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5sq. m in each pane complete all as specified and as directed.
170	Dismantling PVC/CI/AC drain pipe n.exc 110 mm dia
171	S&F PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors, of 110 mm bore including demolition of old existing pipe etc complete all as specified and directed
172	S&F in repair PVC (SWR) reducer 110mm complete all as specified & directed by Engineer-in-Charge.
173	S&F in repair PVC (SWR) vent cowl 75mm bore complete all as specified & directed by Engineer-in-Charge.
174	Taking up or down steel water tubing and connections, including cleaning for refixing or removal from site, for bore of pipes 15mm dia complete all as specified and directed.
175	Taking up or down steel water tubing and connections, including cleaning for re-fixing or removal from site, for bore of pipes 20mm dia complete all as specified and directed.
176	S & F 10 in repair litres capacity, PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as specified and directed.
177	S&F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern), complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and Union for discharge pipe complete all as specified and directed.
178	S&F urinal spreader cast copper alloy, chromium plated for fixing with 15 mm dia pipe. (min wt 60 gms) complete as specified.
179	S&F in repair 15 mm bore pillar taps, cast copper alloy, fancy type with single lever control, chromium plated screwed down high pressure with or without lattered 'Hot' or 'Cold' with long screwed for iron pipe and fixed.
180	E/M portion (Internal)
181	Taking down carefully aluminium/ copper point wiring (light, fan,socket or power) complete, including fixtures and fittings such as switches, ceiling rosees, pendants, regulators , sockets, light fittings, bell, security lights etc., removing materials from site and making good the disturbed surfaces of walls,ceilings etc.
182	M&L for Point wiring with 1.5 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor drawn through and incuding med grade, ISI marked PVC conduit not less than 20 mm dia with accessories concealed on wall/ceiling and incuding provision of 1.5 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including MS sunken box or pressed steel terminal boxes made out of 1.6 mm thick MS sheet with provision of new 3 mm thick plastic laminated sheet top cover over sunken box for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers incl and making good the disturbed surfaces as per existing for for one light/fan point controlled by one switch complete all as per specified and directed.
183	All as per item No 182.0 above but for one socket outlet point 5 Amps on same board.
184	All as per item No 182.0 above but for one socket outlet point 5 Amps on independent board.
185	All as per item No 182.0 above but with 2.5 sqmm cable for 3 pin 15 amps switch socket outlet.
186	All as per item No 182.0 above but for one bell point controlled by one bell push.
187	Supply and fix switch piano 6 Amps flush type single pole one way 230 volt , AC supply complete all as specified.
188	Supply and fix switch piano 16 Amps flush type single pole one way 230 volt , AC supply complete all as specified.
189	Supply and fix socket outlet 3 pin 6 amps 230 volt AC flush type complete all as specified.
190	Supply and fix in repair socket outlet 2 in 1, 3 pin 6/16 amps 230 volt. flush type complete all as specified.
191	Supply and fix bell push 5 Amps flush type single pole one way 230 volt , AC supply complete all as specified.
192	Supply and fixing in replacement door bell electric , ding dong type, single phase 230 volts, complete all as specified.
193	Supply and fix in repair ceiling rose 3 phase/PVC/polycarbonate, isolated body complete all as specified and as directed.
194	Supply and fixing in repair LED lights fitting 1x 20W, 3000k to 6500k, 220 V, AC with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
195	Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 3000 to 6000k 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.
196	Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.
197	Supply and fixing fan regulator electronic step type (socket type), 250 volts, AC supply suitable for ceilling fan of any type/make/sweep .
198	Supply and fix lamp holder PVC /polycarbonate type with back plate.
199	Supply and fixing in repair Load line TPN vertical distribution board 4 Way double door dust protected powder coated inclusive of busbar, neutral link, blanking plates and having provision of MCCB/TP as incomer and MCBs SP/TP as outgoing as per IS - 01 No, having IP-43 protection, complete all as specified and directed.
200	All as per item No 199 above but 8 Way double door complete all as specified and as directed.
201	Supply and fix MCCB 4 Pole, 415 V, Adjustable type, 250 Amps with breaking capacity 36 KA, ISI marked all as specified and as directed.
202	All as per item No 201 above but MCCB, 4P, 160 Amps complete all as specified and as directed.
203	All as per item No 201 above but MCB, TP, 125A, 10kA, 'B' curve complete all as specified and directed.
204	Supply and fix sheet metal enclosures distribution board SPN 12 ways double door , IP 43 protection, 240 volts, with shrouded neutral bar & insulated bus bar and earth link, suitable for MCBs/RCBOs as incomer and out going complete dully grouted on the wall (flush) incl dismantling and taking down old unsv and making connections with suitable size of lugs and making good the disturbed surface matchig with existing surface all as specified and directed.
205	All as per item No 204 above but SPN DB 8 way double door complete all as specified and directed.
206	Supply and fix MCB single pole 240 volts, 50Hz , breaking capacity 10KA, B curve 6A to 32A, ISI marked all as specified and as directed.
207	Supply and fix MCB SPN 240 volts, 50Hz , breaking capacity 10KA, B curve 32 A, ISI marked all as specified and as directed.
208	Material and labour for Sub Main Wiring (in replacement) with two single core 4 Sqmm (nominal area) multi stranded copper conductor FRLS PVC insulated and unsheathed colour code cables, drawn in and including PVC conduit of suitable size with and including one run of continuous multi stranded copper conductor 4 Sqmm (nominal area) FRLS PVC insulated and unsheathed colour code cable for earth continuity, 1100 volts grade , complete all as specified and directed. Note(s): (i) Two runs of 4 Sqmm main cable + one run of 4 Sqmm cable for earth continuity and PVC conduit shall be measured as one unit/one Running Metre.
209	All as per item No 208 above but submain wiring 10 sqmm complete all as specified and directed.
210	Supply and fix in repair sheet metal enclosure single pole and neutral with a two pin socket and earth plug complete with one MCB single pole and 240V, 20 Amp ‘B’ curve, 10 kA, oe complete all as specified and directed .
211	M&L fo earth continuity conductor or main earthing lead fixed to wall or batten or recess or chases or burried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required GI or steel wire 4mm dia including taking down old one completeall as specified and as directed.
212	M&L test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw including taking down old one complete all as specified and as directed.
213	Supply, laying in trenches or under floor or fixed on walls including all pipe fitting High density polyethylene pipes (HDPE) ISI marked of size 32mm dia of pressure rating 6 kgf/cm2 laid in trenches for earthing lead protection including saddle clamps, fastners, nuts, bolts, washers including taking down old onecomplete all as specified and as directed.
214	All as per item No 33 above but size of pipe 40mm dia complete all as specified and directed.
215	All as per item No 33 above but size of pipe 25mm dia complete all as specified and directed.
216	M&L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required galvanised iron strip of size 32x6mm including taking down old one complete all as specified and as directed.
217	S&F GI strip 32 x 6mm with saddles and fixing screws on porcelain insulator/ spacer fixed at every 1 mtr length for extension, re-routing and re-allignment etc of earthing strip on roof/ wall and joining the same with existing / new earthtest point including taking down old or u/s strip complete all as specified and as directed.
218	M&L in repairs for Air termination, single pointed aluminium rod 12mm dia and 300mm long including necessary fixing arrangement using clamp, base plate nuts and bolts after taking down old unserviceable termination rod complete all as specified and as directed.
219	Material and labour for earthing in repair complete with GI earth plate electrode of size 600mm x 600mm x 6mm thick burried directly in ground vertically (depth of pit not less than 2.25 m below normal ground level), with top edge of earth plate not less than 1.5m below normal ground level, earth plate surrounded from all sides by 15cm thick packed alternate layers of charcoal dust and common salt, earth lead GI wire 4 mm dia by means of bolts, nuts, check-nuts and washers of galvanized iron and of earth wire protected by galvanized iron pipe light grade 15mm bore and water pipe 20 mm bore GI medium grade with funnel and wire mesh complete including excavation and earth work, PCC chamber and cover in cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate in lieu of CI cover and frame etc all as specified and shown in electrical plate No. 3 of SSR-2009 (Part-I), testing on completion, complete including dismantling of existing earthing all as specified and directed.Note(s) :- (i) RCC pit cover shall be pre-cast of RCC (1:3:6) type C-1, 80mm thick reinforced with XPM not less than 4Kg/Sqm. (ii) PCC chamber shall be constructed 500 mm away from the edge of earth pit. (iii) Rate shall include GI strip and protection pipe of length 7.5m, excess beyond 7.5m length required at site shall be measured and paid separately..
220	Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. including necessary GI pipe for light fitting, mounting bolts, nuts and washers including taking down u/s fitting complete all as specified and as directed.
221	S&F in repairs highbay LED light fitting aluminium diecast housing material & polycarbonate cover, 90 watt with lumen efficacy >160 lm/watt, light beam spread at 60 degree, 4000 to 5700 k complete all as specified and as directed.
222	S&F mild steel ceiling fan hanging rod 2 ft to 4 ft of existing color including all fitting nuts and bolts all as specified and as directed
223	Taking down carefully existing ceiling fan of any sweep size and cleaning, greasing, rewinding and refixing the same after spray painting of body and blades with two coats of synthetic enamel white color (or as per site requirement) complete all as specified and as directed.
224	Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed watertubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.
225	Supply and fix Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, incl making hole in wall and make good as existing incl dismantling and taking down old unsv complete all as specified and directed. Note: Old unsv exhaust fan will be diposited in MES store yard.
226	Supply and fix in repair 16A 2 way switch 230 volt.type complete all as specified.
227	Supply and fix in repair bell push 5 Amps flush type single pole one way 230 volt , AC supply complete all as specified.
228	Supply and fixing in repair , LED Decorative box type batten fitting 1x9 W/10w, prewired suitable for retrofit LED tubes, prewired upto connection block and connecting with three core PVC copper flexible cable of size 1 Sq. mm from ceiling rose to connector block, complete all as specified and directed by Engineer-in-Charge.
229	S&F in repairs ventilating fan 250 mm sweep, 230 Volts, 1300 to 1400 RPM with high quality engineering plastic body and cutting existing hole to fit properly and making good distrubed surface and electric connection with three core flexile cable 1.5 Sqmm complete all as specified and directed.Note: Old unsv exhaust fan will be diposited in MES store yard.
230	Supply and fix RCBOs for earth leakage, overload and short circuit protection double pole 30 mA current rating 25/32 Amps 230 volts, 50Hz , breaking capacity all as specified and and as directed.
231	Supply and fixing in repair Load line TPN vertical distribution board 4 Way double door dust protected powder coated inclusive of busbar, neutral link, blanking plates and having provision of MCCB/TP as incomer and MCBs SP/TP as outgoing as per IS - 01 No, having IP-43 protection, complete all as specified and directed.
232	Supply and fix sheet metal enclosures distribution board SPN 12 ways double door , IP 43 protection, 240 volts, with shrouded neutral bar & insulated bus bar and earth link, suitable for MCBs/RCBOs as incomer and out going complete dully grouted on the wall (flush) incl dismantling and taking down old unsv and making connections with suitable size of lugs and making good the disturbed surface matchig with existing surface all as specified and directed.
233	Material and labour for sub main wiring with two single core PVC insulated , unsheathed stranded copper conductor cable FRLS 6 sqmm drawing in concealed conduit not less than 25 mm dia with accy and making good the disturbed surface incl one additional PVC insulated , stranded copper conductor FRLS of 6.0 sqmm, green colour for earth continuity conductor incl taking down of unsv sub main wiring complete.
234	Taking down carefully ceiling fan of any size and make for reuse at site or carrying to the store.
235	Hanging only ceiling fan (M.D. supply) and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed by Engineer-in-Charge.
236	S&F in repair LED Bulkhead luminaire 10 watt of polycarbonate housing and enclosed with acrylic diffuser including all connections as per existing at site complete all as specified and as directed.
237	S&F in repairs LED Surface mounted 1x1 ft (295mm X 295mm X 70mm) luminaire fitting LED 18 Watt, cct 3000k to 6500k as per site requirement complete all as specified and as directed.
238	M&L for removing geyser and its PVC connection of any size and make as per existing at site from its original position and refixing the same and making good the disturbed surfaces of walls,ceilings as it before complete all as specified and as directed.
239	E/M portion (External) Please Enable Macros to View BoQ information
240	E/M portion (External) Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Chandigarh Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Special Repair To Bldg No P-8 At Af Stn Highground And Addn/ Altn To Certain Smqs At Af Stn Highground., Highground-Chandigarh

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Special Repair To Bldg No P-8 At Af Stn Highground And Addn/ Altn To Certain Smqs At Af Stn Highground., Highground-Chandigarh

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us